Resume - Piping design, PDMS modelling (design,darft ,iso draft)

Misco Jobs

Resume #73198

CONTACT INFORMATION:
View contact information...

Date of Birth: 29.April.1980
Gen: Male
Marital Status: Married
Nationality: Persian

Education:
Having B.S. degree in Mechanical Engineering, from Azad University South of Tehran (1998-2002)

Profile:
6 years of experience in Oil, Gas & Petrochemical plants as a Piping Engineer
(Design & Modeling)expert in piping design engineering, specification & instructions,
Also expert in making Piping 3D model whith following softwares: PDMS,Auto Plant.

Professional Experiences:

1) Piping Engineer in ODCC (Oil Design Construction Company)
CONSULTANT (From FEB 2006 till now)
Full Time Job:
1-1) Piping Designer & 3D Model
(SHAZAND ARAK REFINARY)
(Joint with Sazeh, Nargan from Iran & Sinopec from China)
-Working on piping & plant of SHAZAND ARAK Refinery as PDMS Modeler.
-Working on piping & plant of SHAZAND ARAK Refinery as Piping Designer.
Job description:
1.preparing key plan according to plot plan.
2.generation nozzle orientation og equipments,then modeling them with 3D model software.(PDMS)
3.preparing 1st M.T.O. from P&ID.
4.preparing line list and tie in list.
5.according to piping standard drawing of this project, PMS,P&ID,design the
Piping and modeling in PDMS.
6.generation piping arrangement drawing(A.G,U.G) and isometric drawing.
7.preparing final MTO form PDMS report.
8.modeling revamp areas with Autoplant software.
9.preparing steam tracing layout and isometric.
10. Generation of Specifications/Standards Design Instructions associated with Piping Engineering.
2) Piping Engineer in SAZEH CONSULTANT CO. (From 2003 Till FEB 2005)
Full Time Job:
2-1) Piping Designer & 3D Model
-Working on piping design of South pars Gas project on phase 6-7-8 in Assalouieh.
As a Plant& Piping Designer, PDMS Modeler
(Joint with TIJD- TOYO, IDRO, JGC & DAILEM)
-Working on CO plant's as a piping checker in Mahshahr for lineup.
(Joint with Snamprogetti Italy)
Working on piping design of PVC project in Mahshahr as a Piping Designer
(Joint with UHDE Germany)
-Working on piping design of Darquain Oil project As a Piping Designer & Procurement & Material checker by Final Mto.
(Joint with ENI Italy)
Job description:
1.preparing key plan according to plot plan.
2.generation nozzle orientation og equipments,then modeling them with 3D model software.(PDMS)
3.preparing 1st M.T.O. from P&ID.
4.preparing line list and tie in list.
5.according to piping standard drawing of this project, PMS,P&ID,design the
Piping and modeling in PDMS.
6.generation piping arrangement drawing(A.G,U.G) and isometric drawing.
7.preparing final MTO form PDMS report.

3) Piping Engineer in CHAGALESH CONSULTANT CO.
(From 2005 Till FEB 2006)
Full Time Job:
3-1) Piping Designer & 3D Model
- Working on piping design & 3D model of Srajeh Gas field in Qoam.
As a Piping Designer & PDMS Modeler.
-Working on piping & plant design of LAVAN island project.(LPG Recovery &
Storage Unit of LAVAN Oil Refinery),as a piping designer & PDMS Modeler.
Job description:
1.generation nozzle orientation og equipments,then modeling them with 3D model software.(PDMS)
2.preparing 1st M.T.O. from P&ID.
3.preparing line list.
4.according to piping standard drawing of this project, PMS,P&ID,design the
Piping and modeling in PDMS.
5.generation piping arrangement drawing(A.G) and isometric drawing.
6.preparing final MTO form PDMS report.

4. Piping engineer in IDRO CONSULTANT CO. (IDRO & IPMI)
(As a Consultant – Part time):
-Working on piping design of South pars Gas project on phase 6-7-8 in Assalouieh.

5. Piping engineer in TONDOK CONSULTANT CO.
(As a Consultant – Part time):

-Working on piping Design as Designer in PVC project.& also PDMS Modeler.

*locations: Tehran Office,Iran

- Material Knowledge:
Good Familiar with codes and standards related to the above experiences and positions in piping specifications.

Engineering Computer Science:

Being Expert in the following software:
-PDMS:
All design module for 3D modeling.(Design All 3D Model,Draft,Iso Draft)

-Auto Plant

-Auto cad (All version-2D)

Being in user level on following software:
-Microsoft office

Language Skills:

Native Language:
Farsi
English level:
Good ability in reading, writing and speaking

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3201 to 3250 of 9777)

Go to Search Parameters...

Brief Description

To become a successful Planning Professional in a professionally managed

Twenty nine years of engineering management experience for which 24 years in the oil, gas and shipping industry -EPC projects which includes: Project management, conceptual, feasibility studies, FEED and detailed design engineering, procurement, planning, organizing, QA /QC, construction.

Nobody has climbed up through the steps of success with his hands in his pockets.

involved in installtion and commissioning of instruments, trouble shooting, helping in commissioning activites.

Piping design, PDMS modelling (design,darft ,iso draft)

6 years experience of offshore structural engineering in FEED, detailed design, fabrication, offshore installation, structural integrity asessment and decommissioning within Asia Pacific region. Hands-on in using SACS.

Seeking challenging assignments in the field of Process Engineering Design, Simulation and Commissioning with leading organisations of repute in the Petrochemical Industry that offers me opportunities to utilize my engineering skills & experiences for advancement in my career endeavours

Working with Kuwait Petroleum Corporation for more than 3 years, Masters in Eng. Literature, Good in Ms. Office, Excellent communication skills, hard-working, organized,multitasked, can work under pressure, good teamwork, maintains confidentiality of work, good analytical skills.

I am skilled in material and inventrol control and will be glad to serve in such environment.

B.E. Mechanical With Post Graduate Diploma in Piping Design, 6 Years Design Experience & Four & Half Years Experince as a Stress Analysis Engineer. Well Familiar with CAESAR II, SPR, DRV, Nozzle Pro-6, AUTOCAD 2000.

Can do electrical and instrument job and been working in oil & gas line at Sudan and Myanmar

PDMS Administration of Detail and FEED projects. Total of 6 six years of experince of which 4 years as PDMS Administrator

I have BSc. in Mechanical Engineering, MSc. in Mechanical Vibration of Rotating and MSc. in design of gas turbines. I have >20years of experience with Engineering and Operating Companies in O&G and Petrochemical fields as Senior Mechanical Engineer in Egypt Enppi and in Qatar QP Offshore and QVC

Over 24 years professional experience IT, SAP SECURITY, SAP IS-H*

MBA Graduate with 4 years of financial services industry experience seeking full time employment in the energy sector.

Im certified experience all i mention in my Resume

Dear Prospective Employer,I am 2nd Engr with experience on chemical, oil and gas tanker with motor and steam turbine propulsion.

HSE advisor - Paramedic - BCOm Sales and Marketing

Welding inspection and piping works

Successfully handled the Pre-commissioning and commissioning activities of, offshore, Onshore Plant having capacity 3900 MM SCFD of 3 sealine and & Separate the hydrocarbon gas (Propane and butane) and Liquid.

Power systems operations training with ten years experience in high voltage transmission system operation. ability to communicate, outage scheduling, equipment switching and load forcasting

MBA from National University of Singapore Business School. Worked for 4 years with India's leading Global Fortune 500 company in the Oil and Gas Sector

EXPERIENCE PIPELINE ENGINEER

Exceptional Office Manager, Microsoft , Maximo, JDedwards, typing 80 wpm and ten key by touch

Engaged in Engineering and design services for Hydrocarbon Processing Industry

Drilling Engineer with 16 years experience

A total of ten years experience in the project offices & administration field, the last five 5 years committed in the Document Control specialty in the engineering, construction of plant and oil & Gas sector.

fpso, subsea, structural, naval, project management, marine, risk management

Instrument Engineer is seeking a challenging Position for growth and career opportunity in Oil & Gas Industry. More than 13 years of experience in Preventive and break down maintenance for power plant & gas plant instrumentations with GE Frame 6 gas turbines, DCS and Mark V control systems.

I am a Petroleum Engineer with 7 years of oil & gas industry and actively involved as a Drilling Engineer with national and multinational companies. I am fully aware of well planning and execution process and actively involved in office based well planning and day to day opertaions supervision.

BE Mechanical Engineer with 5 years experience in Piping Stress Analysis

Experienced exploration / production geophysicist and geologist with major Exploration Companies

22 years oil field Experians. Higher secondary.

Experienced Instrument and Control Technician, with more than 20-year hands-on work experience. My experience covers working for Petroleum Refineries, Petrochemical facilities and Offshore oil/gas production facilities.

To acquire position of Production Stimulation/ Reservoir Stimulation

Hi I am an engineer with instrumentation as specility and also i have don 3 year diploma in electrical engg . I have total of 8 year of experiance in oil filed construction plus in maintanence an in quality control

Has more than Seventeen (17) Years of continuous experience in Cost Engineering and Quantity Surveying works which involved the following:

Instrument engineer with around 15 yrs of versatile experience in the field of installation,commissioning , operation amd maintenance.

Advanced Landman focused on client's needs and demands.

Oil Executive

Reliable, Honest, Ethical

Free! Almost 20 years experience in Supply Chain i.e. Procurement, Expediting, Materials Control, Logistics & Operations within the Oil & Gas, Drilling & Exploration, Construction & Maintenance, onshore/offshore experience in the UK and overseas

Working as reservoir engineer at maginal field for 5 years, can do petrel simuation, reservoir management.

5 YEARS EXPERIENCE AS PLANNING ENGINEER IN OIL & GAS FIELD CONSTRUCTION + EXPERT IN PRIMAVERA SOFTWARE

Process Engineer, Chemical graduate, experience with engineering services for refining and petrochemical industries

Procurement Engineer

Broadening experience leading to Project Manager and Executive/Board Level opportunities.

Shift supervisor at worlds largest butane to maleic anhydride facility. Qualified in all assignments including control room and field.

Electrical and Instrument Technician, 20 years international experience.

Drafting (Manually & computerized using AutoCAD 2D & 3D), Structural Analysis & Design of Building (Manually and computerized using STAAD & Microfeap Software’s), Construction Estimates, Plumbing/Piping Design, Surveying, Project Supervision and Computer Literate (Microsoft Word,Excel & Powerpoint)

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 [ 65 ] 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out