Resume - involved in installtion and commissioning of instruments, trouble shooting, help...

Misco Jobs

Resume #73252

CONTACT INFORMATION:
View contact information...

Special Trainings:

Yokogawa centum cs-1000 Distributed control systems.
Yokogawa plc.

Profile:

Erection, Commissioning and Maintenance of Instrumentation & Control systems, Field oriented in Fabrication, Installation, Calibration, Commissioning and trouble shooting, Competent and familiar working with computer systems, specifications various codes and drawings. Estimation of Tender Bids, Assessment and Mobilization of Manpower, Material & Equipment requirements. Ensure Compliance with Safety and Quality Standards.

Employment Information

Company Name: ALMEER TECHNICAL SERVICES CO W.L.L
Designation: Instrument Engineer
Industry: Power Generation.(2400MW)
Period: FEB 2007 –TO TILL DATE

Instrument Engineer, involved in maintenance of 7.2MIGPD x 16units desalination with multistage flash distillation, 300MW turbine at AZ-ZOUR SOUTH POWER STATION.

Employment Information
Company Name: INTEGRAL SERVICES CO W.L.L
Designation: Instrument Engineer
Industry: EPC – Equate Petrochemical Company.
Period: Nov 2005 - April 2006

Work Description:

Instrument Engineer, involved in installation, commissioning of various field instruments and integrating them to HONEYWELL Distributed control systems.

EQUATE PETROCHEMICAL COMPANY has been involved in production of Ethylene glycol, Polypropylene, Polyethylene along with Utilities.
Nature of job:

* Installation of nuclear level transmitters, flow transmitters, level transmitters, pressure gauges, pressure switches, limit switches, ultrasonic time of flight flow meters, pump reverse rotation monitoring, solenoid valves,& control valves.
* Rerouting signals from local junction box to remote instruments enclosure.
* And interfacing with these rerouted signals to distributed control systems.
* Performing loop checking and coordinating with them in the commissioning activities.
* Coordinating with Equate representatives to get various work permit.
* Monitoring overall project activities and report to the Equate representatives.
* Mobilization of manpower, materials and equipments to carry out the job.
* Performing quality documentation as per ISO -9002 standards.
* Estimation of tender bids.
* Preparing Inspection and Test planning(ITP) as Equate standards and method of statements.
Employment Information

Company Name: INTEGRAL SERVICES CO W.L.L
Designation: Instrument Engineer
Industry: Power Generation.(2400MW)
Period: Nov 2003- 30 Nov 2006
Work Description:
Instrument Engineer, involved in maintenance of 7.2MIGPD x 16units desalination with multistage flash distillation, 300MW turbine at AZ-ZOUR SOUTH POWER STATION.
Nature of job:

* Calibration of all types of instruments including pressure transmitters, flow transmitters, level transmitter, pressure switches, flow switches,position transmitters, pneumatic controllers & control valves.
* Calibration Temperature monitoring systems-DKK
* Calibration of conductivity analysers-DKK
* Performing protective and cold function checks.
* Calibration and maintenance of gas analyzers like CO, Oxygen, and CO2.
* Maintenance of smoke detectors (Ionization and photoelectric)
* Calibration and Maintenance of water analyzer like Conductivity and PH analyzer.
* Maintenance of field instrument and trouble shooting in logics for oil pumping station for power plants
* Installation and commissioning of new instruments and integrating them to SIEMENS TELEPREM-XP, MITSUBISHI DIASYS UP & BAILEY –NETWORKS 90 SYSTEMS, YEW SYSTEM 1100
* Well experienced in Maintenance and trouble shooting in M/s Toshiba make Turbine Supervisory Instruments( TSI-PE2 and PE-5 Series) for 300MW Steam turbine( Toshiba make)
* Experienced in maintenance of Turbine Supervisory Instruments ( Bentley Nevada- 7200 and 3500 system) for 300 MW steam turbine.
* Through knowledge in Turbine governor control functions( Load control, Speed control and Valve position control) of Toshiba make EHC systems for 300MW Steam Turbine.
* Hands on experience in servicing and calibration of Electro hydraulic converter (Dyanaguide) used for main stop valves, intercept valves and control valves operation in 300mw steam turbine.
* Planning, developing and implementing preventive maintenance of various control systems, test procedures according to working standards, and check/ evaluate its performance during commissioning.
* Planning, developing and implementing effective instrumentation maintenance program of plant control systems and devices.
* Planning, developing, and implementing approved modifications of control system instruments which would improve reliability and performance.
* Supervise in the performance tests of various controls and other devices to ensure operational reliability during unit start-up in preparation to declare for commercial operation
* Directly supervise plant troubles causing outages, identify and troubleshoot root cause affecting the systems and recommend solutions to avoid recurrence.
* Reviews and oversees test results, calibration results and other data of plant protective and monitoring instruments and compare gathered information to established allowable standard tolerances.
* Provide in-house training and guidance for the development of newly hired I & C personnel on their functions, technical information, policies, rules and regulations, and ensure observance of health and safety awareness at all times.
* Works closely with health, safety and quality management officers in the implementation of IMS (Integrated Management Standards) to ensure such requirements are met and maintained
* Give input to Maintenance Manager on proposed control improvements, operational problems, requisition of spare parts, and other technical information for the plant to achieve overall goals and objectives.
* Works with Operations, Mechanical, and Electrical sections to plan and schedule maintenance activities, equipment tests, spare part inventories, root cause analysis, and other related team work development to maximize plant generation
* Preparing, updating, measuring and test equipment calibration for plant use field calibrators, reference equipment standards.
* Initiate measuring and test equipment recertification found due calibration to ensure IS0 9002 standards are met

* Checks, Evaluates calibration procedures, work instructions on instruments and devices and recommend improvements to supervisor.
Employment Information

Company Name: INSTRUMENTATION ENTERPRISES
Designation: Instrument Engineer
Industry: Power Generation.(250MW)
Client: NEYELLI LIGNITE CORPORTION
Period: June 2002- Oct 2003

Work Description:

Instrument engineer involved in shutdown maintenance of 250MW steam turbine.
Nature of work:
* To inspect the incoming materials and spares for the instruments and check for the quality.
* To check the Test equipments and maintain the calibration records as per ISO standard.
* To check the quality of the work being executed by our Maintenance Department.
* To Maintain the record of the instruments calibrated and check the quality documentation.
* To install and replace absolete instruments.
Employment Information

Company Name: INTEGRAL SERVICES CO W.L.L
Designation: Instrument Engineer
Industry: REFINERY
Client: Kuwait National Petroleum Corporation
Period: May 2006- Oct 2006
Work Description:
Instrument Engineer involved in erection and commissioning of instrument at Mina Al-Ahamdi, one of the largest Refinery in Kuwait.Project aims to distribute motorgas all over Kuwait.

Nature of work:

* To inspect the incoming materials and spares for the instruments..
* To check the Test equipments and maintain the calibration records as per ISO standard.
* To check the quality of the work being executed by our E&C Department.
* To maintain the record of the instruments calibrated and check the quality documentation.
* To install and replace obsolete instruments.
* Installation of MOV'S(LIMIT TORQUE).
* Installation of COLORIEMETERS
* Installation of Flow Transmitters, Temperature Transmitters.(ABB)
* Erection of system Marshelling Cabinets.
* Integrating the Instrument Signals to DCS and PLC(Rosemount and Modicon )
* Installation and commissioning of paging systems.
* Preparing Spare Parts Interchangeble Reports (SPIR)
TRAINING IN YOKOGAWA CENTUM CS-1000 DISTRIBUTED CONTROL SYSTEM:
* ON line / OFF line system configuration.
* Check pointing of data.
* Evolving control strategy, logic building, code generation using, testing and implementation including loop tuning.
* Trip logic generation.
* Creating process schematics using picture editor.
* Trends configuration for different operating conditions.
* Sampling rate selection.
* Data acquisition for digital/analog signals.
* PV processing, monitoring, mid value selection, output signal generation to FCE, recorders, other systems, etc.
* Flow and level compensation.
* Providing system manual backup facility for the process when network communication fails.
* Preparing sequence –table for logics.
* Configuration of portable field control station.
* Configuration of local communication bus.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3201 to 3250 of 9777)

Go to Search Parameters...

Brief Description

To become a successful Planning Professional in a professionally managed

Twenty nine years of engineering management experience for which 24 years in the oil, gas and shipping industry -EPC projects which includes: Project management, conceptual, feasibility studies, FEED and detailed design engineering, procurement, planning, organizing, QA /QC, construction.

Nobody has climbed up through the steps of success with his hands in his pockets.

involved in installtion and commissioning of instruments, trouble shooting, helping in commissioning activites.

Piping design, PDMS modelling (design,darft ,iso draft)

6 years experience of offshore structural engineering in FEED, detailed design, fabrication, offshore installation, structural integrity asessment and decommissioning within Asia Pacific region. Hands-on in using SACS.

Seeking challenging assignments in the field of Process Engineering Design, Simulation and Commissioning with leading organisations of repute in the Petrochemical Industry that offers me opportunities to utilize my engineering skills & experiences for advancement in my career endeavours

Working with Kuwait Petroleum Corporation for more than 3 years, Masters in Eng. Literature, Good in Ms. Office, Excellent communication skills, hard-working, organized,multitasked, can work under pressure, good teamwork, maintains confidentiality of work, good analytical skills.

I am skilled in material and inventrol control and will be glad to serve in such environment.

B.E. Mechanical With Post Graduate Diploma in Piping Design, 6 Years Design Experience & Four & Half Years Experince as a Stress Analysis Engineer. Well Familiar with CAESAR II, SPR, DRV, Nozzle Pro-6, AUTOCAD 2000.

Can do electrical and instrument job and been working in oil & gas line at Sudan and Myanmar

PDMS Administration of Detail and FEED projects. Total of 6 six years of experince of which 4 years as PDMS Administrator

I have BSc. in Mechanical Engineering, MSc. in Mechanical Vibration of Rotating and MSc. in design of gas turbines. I have >20years of experience with Engineering and Operating Companies in O&G and Petrochemical fields as Senior Mechanical Engineer in Egypt Enppi and in Qatar QP Offshore and QVC

Over 24 years professional experience IT, SAP SECURITY, SAP IS-H*

MBA Graduate with 4 years of financial services industry experience seeking full time employment in the energy sector.

Im certified experience all i mention in my Resume

Dear Prospective Employer,I am 2nd Engr with experience on chemical, oil and gas tanker with motor and steam turbine propulsion.

HSE advisor - Paramedic - BCOm Sales and Marketing

Welding inspection and piping works

Successfully handled the Pre-commissioning and commissioning activities of, offshore, Onshore Plant having capacity 3900 MM SCFD of 3 sealine and & Separate the hydrocarbon gas (Propane and butane) and Liquid.

Power systems operations training with ten years experience in high voltage transmission system operation. ability to communicate, outage scheduling, equipment switching and load forcasting

MBA from National University of Singapore Business School. Worked for 4 years with India's leading Global Fortune 500 company in the Oil and Gas Sector

EXPERIENCE PIPELINE ENGINEER

Exceptional Office Manager, Microsoft , Maximo, JDedwards, typing 80 wpm and ten key by touch

Engaged in Engineering and design services for Hydrocarbon Processing Industry

Drilling Engineer with 16 years experience

A total of ten years experience in the project offices & administration field, the last five 5 years committed in the Document Control specialty in the engineering, construction of plant and oil & Gas sector.

fpso, subsea, structural, naval, project management, marine, risk management

Instrument Engineer is seeking a challenging Position for growth and career opportunity in Oil & Gas Industry. More than 13 years of experience in Preventive and break down maintenance for power plant & gas plant instrumentations with GE Frame 6 gas turbines, DCS and Mark V control systems.

I am a Petroleum Engineer with 7 years of oil & gas industry and actively involved as a Drilling Engineer with national and multinational companies. I am fully aware of well planning and execution process and actively involved in office based well planning and day to day opertaions supervision.

BE Mechanical Engineer with 5 years experience in Piping Stress Analysis

Experienced exploration / production geophysicist and geologist with major Exploration Companies

22 years oil field Experians. Higher secondary.

Experienced Instrument and Control Technician, with more than 20-year hands-on work experience. My experience covers working for Petroleum Refineries, Petrochemical facilities and Offshore oil/gas production facilities.

To acquire position of Production Stimulation/ Reservoir Stimulation

Hi I am an engineer with instrumentation as specility and also i have don 3 year diploma in electrical engg . I have total of 8 year of experiance in oil filed construction plus in maintanence an in quality control

Has more than Seventeen (17) Years of continuous experience in Cost Engineering and Quantity Surveying works which involved the following:

Instrument engineer with around 15 yrs of versatile experience in the field of installation,commissioning , operation amd maintenance.

Advanced Landman focused on client's needs and demands.

Oil Executive

Reliable, Honest, Ethical

Free! Almost 20 years experience in Supply Chain i.e. Procurement, Expediting, Materials Control, Logistics & Operations within the Oil & Gas, Drilling & Exploration, Construction & Maintenance, onshore/offshore experience in the UK and overseas

Working as reservoir engineer at maginal field for 5 years, can do petrel simuation, reservoir management.

5 YEARS EXPERIENCE AS PLANNING ENGINEER IN OIL & GAS FIELD CONSTRUCTION + EXPERT IN PRIMAVERA SOFTWARE

Process Engineer, Chemical graduate, experience with engineering services for refining and petrochemical industries

Procurement Engineer

Broadening experience leading to Project Manager and Executive/Board Level opportunities.

Shift supervisor at worlds largest butane to maleic anhydride facility. Qualified in all assignments including control room and field.

Electrical and Instrument Technician, 20 years international experience.

Drafting (Manually & computerized using AutoCAD 2D & 3D), Structural Analysis & Design of Building (Manually and computerized using STAAD & Microfeap Software’s), Construction Estimates, Plumbing/Piping Design, Surveying, Project Supervision and Computer Literate (Microsoft Word,Excel & Powerpoint)

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 [ 65 ] 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out