Resume - Instrument

Misco Jobs

Resume #73274

CONTACT INFORMATION:
View contact information...

Date of birth: 8/23/1979
Marital Status: Single
Nationality: Iranian
Experience: 5 years
Sector: Oil, Gas, Engineering
Age: 28 years

Job title: instrumentation, Software Applications
Date last update: 7 december 2007
I have work the Instrument and control system developer with over 5 years of practical experience, in "Project and Maintenance" related to Instrument Control system. Presently, working as Instrumentation Manager DCS the company ADICO in "SHAHID TOONDGOIAN PETROCHEMICAL CORP.".
Education:
1/21/2001 Islamic Azad university (IAU) of Tabriz, B.S Engineer of Control Engineering,
References:
Period: 3/21/2003
Company: Tuosa Niero (TNC)
Address: Tehran
Contact: Software Applications Manager
Tel.:
E-Mail:

Period: 3/21/2005
Company: Parshassas (PH)
Address: Shiraz
Contact: Software Applications Manager
Tel.:
E-Mail:

Period: 11/18/2006
Company: Azar Dagig Iranian (ADICO)
Address: 9th unit, No21, sharifi Ave, north Gandy Tehran-Iran
Contact: Software Applications Manager
Tel.: + Int 21 88665615-17
E-Mail: www. adico-eng.com

Operating Systems
* ƒnWindows ( 95/98, NT/2000/XP)
* ƒnMS-DOS
Data Communication
* ƒnHART, FCS protocols
* ƒnRS232 ¡V RS 485 Instrument control, data acquisition
* ƒnTCP/IP - TCP and UDP via Sockets
* ƒnProprietary Protocols - Instrument control, data acquisition
* Windows Networking, experience of workgroup LAN installation and management

Specialist Areas
* Instrument control
* Development of DCS software applications
* Data acquisition, PLC and graphical System

Foreign Languages
* English Spoken/written to standard,
* Turkish Spoken/written to A-Level standard

EQUIPMENT HANDLED:
A: Systems: Delta V R6.03.02 Rosemount Make with 3500 I/O's.
ESD: HIMA Make HIMA with 1800 Digital I/O's.
4-mation 4.40 Make Siemens Moor with 1200 Digital I/O's.
PLC: Siemens S7, Allen Bradely SLC500.

B: Compressor/Turbine
04 stage & 02 stage expander Centrifugal Air Compressor viz. Demag / Alstom Turbine, Compressor fitted with machinery monitoring Schenck and woodward system with Jaquet Speed measurement FT 3000 System.
C: Field Mounted Instruments(Foundation Field bus, Hart, etc ):
Transmitters: Diff. Press, Press, Mass flow, Magnetic flow, Vortex flow, analysis O2,
N2,PH, Conductivity, etc of Rosemount & Yokogawa Make.
Control Valves: Globe, Butterfly, Ball valve, Angle valve etc of Masoneilan, Fisher, Samson Make.
Certificates and Passed Courses:
Engineering & Configuration of Emerson DeltaV DCS & HMI Software at Eresco Co. (18 February 2007 ¡V 25 March 2007)
Engineering & Configuration of Siemens S7 PLCs & WINCC HMI Software at QESHM voltage Co. 20 March 2005 ¡V 25 March 2005)
Calibration for instrument at pars hassas Co.
Allen Bradely SLC500 at pars hassas Co.
Engineering & Configuration of HIMA PLC software at pars hassas Co.
Foundation Fieldbus

Comp. Skills:
Control System Hardware Design for DeltaV/ DCS
Control System Programming based on IEC61131-3 and Siemens languages
Siemens WinCC HMI Configuration
Microsoft Office: EXCEL, WORD,
Check Mail Compose Search Mail: Search Mail Search the Web
Preparing schedules for commissioning activities and review of progress.

Professional Experience:
TNC Eng. Company (2002-2004):

experience in "Project and Maintenance" related to Instrument Control system. Presently, working as Instrumentation Manager in power plant SHAND
the TNC company for hands on experience of plant Operation and monitoring including Overhauling of instrument maintenance.
Specialist of Configuration, Engineering and Maintenance of SIEMENS PLC System (Standard, Redundant & Fail-Safe I/O) and communication with other systems via Ethernet, Profibus, MODBUS, OPC.
Project expert of following projects:
AIR dryers (air instrument) Project for power plant SHAND. integrated with Siemens S7-200 PLC Programmed by Simatic Step7 Software.
AIR compressor(air instrument and service) Project for power plant SHAND. integrated with Siemens S7-300 software Redundant PLC Programmed by SHAND Step7 Software.
Auxiliary cooling water Project for power plant SHAND. integrated with Siemens S7-400 software Redundant PLC Programmed by Simatic Step7 Software.
CPP (condenser polishing plant) for power plant SHAND Integrated with Siemens S7-400 software Redundant PLC Programmed by Simatic Step7 Software.
Pars hassas (PH) Eng and Maintains. Company (2004-2006):

Past Experience:- Worked in the maintenance of CF.PX. Olefin plant in In "BIPC" PETROCHEMICAL CORP."
Past Experience:- Worked in the commissioning and maintenance of PTA-1 plant in "In "SHAHID TOONDGOIAN PETROCHEMICAL CORP."

PROJECT EXPERIENCE:
* Experience in Pre-commissioning & Commissioning of Petro Projects.
* C0-ordinated with detailed engineering contractor's viz.,, Daelim Korea.
* Planning and co-ordination with local erection contractors like. IIND, Sazeh.
* Involved in commissioning of DCS/ESD systems, centrifugal compressor and package items along with vendor supervisor.

MAINTENANCE EXPERIENCE:
* Experience in Predictive, Preventive and Breakdown maintenance of field mounted Instruments as well as control systems.
* Spares, Manpower and Material planning for Preventive & Breakdown maintenance jobs.
* Providing training to fresh Engineers and sub-ordinates.
Adico Eng. Company (2006-2007):

Senior Engineer of following project:
Train "F"."G"."H" DCS SYSTEM System Project for Shahid Tondgooyan Petrochemical Co.
(PET2) programmed by DeltaV Ver 6.3.2 DCS Software.
Train "F" Chips Conveying & Storage System Project for Shahid Tondgooyan Petrochemical Co. integrated with Siemens S7-400 software Redundant PLC Programmed by Simatic Step7 and Monitoring by Simatic WinCC Software.
Train "G & H" Chips Conveying & Storage System Project for Shahid Tondgooyan Petrochemical Co. (PET2) programmed by Siemens S7-414 CPU Software.
Electrical Substation SCADA Project for Shahid Tondgooyan Petrochemical Co. (PET2) programmed by Siemens S7-414 Software Redundant PLC and Monitoring by Simatic WinCC Software.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1451 to 1500 of 9855)

Go to Search Parameters...

Brief Description

I am a Senior Directional Driller with Schlumberger Overseas SA. Graduated from Colorado School of Mines, USA in Petroleum Engineering

HSE SPECIALIST, Skillful on Risk assessment, environmental impact assessment, HSE audit, accident and incident management, HSE reporting, emergency response and preparedness, HSE training. Safety management, environmental management,

Instrument

I'm a graduate of Bachelor of Science in Accountancy, class of 1996, at Polytechnic University of the Philippines, gained total of 12 years experience in Accounting with a combination of Administrative task.

A fully certified (NACE CIP I, II, & III) & highly motivated manager with over 18 years experience in the Oil & Gas Industrial Painting Sector. Over 15 years of this experience has been in the field of corrosion engineering projects for Shell, BP, DNV & International Coatings.

With more than four (4) years of qualified experience in Supply Base Operation from Warehousing and Logistics, including Material control, Equipment movement and five (5) years in Material Management and Procurements. Including cargo handling operations, document controlling and personnel supervis

I have got 12years of extensive experience with sound technical background in the maintenance of large turbo machines such as turbines (steam and gas), compressors (centrifugal, axial, screw and reciprocating),and various types of pumps present in offshore, large Refinery, petrochemical, Power and d

A safety professional having more than 14 yrs of experience in oil & gas industries

Experienced Piping Design Engineer

System Analyst with 16 years experience. Skills - Visual BASIC, MS SQL, Oracle, OSA

25 years of experience in the oil and gas industry working with various companies on varied projects from the office phase to final production and beyond.

Over 16 years of experience in Oil and Gas facilities design, construction support and process piping design. FEED experience as an EPC contractor and as Oil Operator/Owner/Client. Greenfield & Brownfield engineering design experience.

Had gained tremendous experience in Product Planning and Scheduling. Good in modeling and analysis. Holds Master Degree in Chemical Engineering.

10 years experience working in in-house seismic processing and Field QC processing around the world

Over 10 years of working experience, including more than 9 years in Administration, Human Resources and Procurement in the Oil and Gas Industry.

Over ten (10) years experience in mechanical engineering for major oil, gas and petrochemical projects. Proficient in basic and detailed engineering, construction supervision and monitoring, project planning and control. Working knowledge of engineering codes and standard.

An experienced Engineer of over 18 years of Industrial experience with a high level of expertise in a variety of related aspects of Project & Operations Management and Process Engineering Management within the Oil and Gas Industry.

B.Sc. Mechanical Engineer. Over ten years experience in maintaining, overhauling and technical support for rotating equipment used in the oil and gas industry. Experienced with budgets, scheduling, calculation and analysis of rotating equipment repair requirements.

Use my skills and experience for your mission critical UNIX Infrastructure

QA Manager with 20+ years diverse experience

Instrument Technician with over 25 years experience in Project Engineering, Field Instrumentation, Inspection, PLC’s, and DCS’s. Experienced in a broad field of Hazardous and Volatile plants such as Hydrogen plants, LPG, Methyl Methacrolate and Resin plants as well as offshore platforms on the Natio

Reservoir engineering, development plan and management of upstream projects.Exceptional communication & interpersonal skills,In depth experience, in strategic planning, identifying new opportunities, execution of business plan, managing policies, problem solving, motivation and training,

I am having experience in Both static & rotating equipments

BE Chemical

I completed B.S. Chemical Engineering and I have 19 years working experience in Refineries and Gas plants in which 9 years worked as a Shift Supervisor. At present I am working with multinational workforce in Adnoc, Ruwais Refinery, Abu Dhabi, UAE.

Project Manager/Engineer with 25 year experience in Oil and Gas Pipeline and related Stations. USA Professional Regestration Mechanical Engineer and Certifiec projectmangement Professional PMI USA. Oversea work prefered including remote sites. Currently with Saudi Aramco, Saudi Arabia.

SKILL SETS. Purchasing Department Director for a large International Organization, Contract Negotiation, Vendor Selection Process Management, Projects Management and Follow Up, Inventory Control Management, Strong Computer Skills

I AM INCLUDING MY RESUME SUMMARY WITH MY RESUME.

International employer with business operations located in Europe, South East Asia, and the USA that is in need of a tech savvy liaison for quality assurance validation of electronics and telecom equipment/applications.

Senior Project Manager/Engineer (Offshore Projects)

I am interested in helping to improve the workplace morale of oil rig workers by conducting highly interactive and motivational workshops.

International Geophysicist with over 23 years experience in all facets of petroleum exploration, created and promoted prospects through use of seismic and well data. Expertise in use of Geoquest and LandMark geophysical software, experience in both 2D and 3D data acquisition and processing.

I have over 22 years of experience in the drilling industry, and have worked in 21 countries. I have an extensive background in all aspects of drilling engineering, completions, production testing, well planning, contracts, operations, and logistics in remote land and offshore operations.

20+ years in oil industry with extensive international exposure. Most part in drilling rigs management, but also human resource management, general management and more recently a training coordinator and Instructor for well engineers.

25 years exploration and production experience. Maintenance engineer.

Chartered offshore/structural engineer with seventeen years experience in design, analysis and reassessment of offshore and onshore structures in the in the North Sea and Middle East.

Exploration-Project Geologist, Petroleum Geologist, Well Site Geologist,

Highly motivated, results oriented with extensive and broad experience in the petroleum industry ranging from producing operations, reservoir and production engineering to management of a large technical staff.

Objective: Employment in petroleum production engineering, rig supervision, production operations supervision, or project management where seasoned experience, effective logistics, HSE practices, and practical technology can be brought together to attain corporate objectives.

Offering extraordinary experience in areas of purchasing, material coordination, project management, inventory control, and supervisory abilities. Seeking opportunities with a team organization in the natural resources extraction industry.

Seeking challenging and rewarding career that will utilize my 13 years' work experience in the Oil Services Industry and more than 20 years of Physics, Mathematics and Computer knowledge.

I am interested in a position in the EHS field. I have a degree from University of Findlay

A material analyst with a strong ability to plan and execute build schedules that support material requirements and maintain manageable inventory target levels. Develops and manages the inbound and outbound flow of materials and parts.

To obtain long-term employment with an organization that will allow me to utilize my sales, management, and organizational skills in order to achieve company objectives. An honest approach that has resulted in exceeding set goals in the petroleum industry for the past 22 years.

My experiences in mechanical works covered maintenance/construction of oil/gas processing plant and power plants. See attached Resume.

Over 14 Years of Strong Experience in Project Management, Estimation, Design & Procurement in Petroleum OIL,LUBES, Gas, and HVAC System.

Progressive and diversified experience in operation of gas pipeline transmission and oil field production. Proven track record in: Legal negotiations; Operations supervision; Budget management; System design; Project management; Conflict resolution.

Consulting Services Plant Construction & Modifications Reliability Inspections & Risk Assessment Maintenance Programs Pressure Equipment Design QA /QC Management Project Engineering & Management Procurement of Equipment Repairs and Alterations of Pressure Vessels and Storage Tanks.

I am a very experienced Seismic Crew Party Manager (23 years), currently seeking a Field Crew Management, QHSE, Mechanical Supervisor, or Consultancy position within the exploration industry. I am available for immediate relocation worldwide.

A drilling professional with over 20 years experience. Able to work effectively in both field and office drilling positions with the ability to achieve results. I can offer proven technical, planning, execution, leadership, decision making, risk management and communication skills.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 [ 30 ] 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out