Resume - I understand from your advertisement that there are openings in reputed company ...

Misco Jobs

Resume #73563

CONTACT INFORMATION:
View contact information...

Training Undergone ƒáCourse on Internal Auditor Organized by IRCA
ƒáCourse on Lead Auditor Organized by IRCA
Passport Details:# E6002292 Issued at Riyadh, Date of Exp.29/10/2013

CAREER OBJECTIVE: I would like to work in a Manager capacity in QA/QC and would like to be adequately utilized with my technical and Manager skills, I hope to provide satisfying value addition to the management.

July 05- June 06: Saudi Arabian Kent, Saudi Arabia

Project: Saudi International Petrochemical Company (SIPCHEM Complex at Jubail)

Position: Project QC Manager

ƒá Ensuring that all S.A.Kent Quality Programmes are operating effectively and that they are in full compliance with ISO 9001: 2000.

ƒá Conducting audits on manufacturers, Vendors and Projects. Preparing audit report.

ƒá Ensuring all Contractors' activities etc, comply with SIPCHEM Standard and the General Codes, Reviews Contractors Quality Documentation and project Quality plan.

ƒá Ensuring that all approved QC Inspection team were continuously checking and monitoring all work activities.

ƒá Ensuring all QA/QC non-conformances and punch list items were actioned correctly, signed off and close.

ƒá Attending meetings with Sipchem and Project Inspection team.

ƒá Ensuring Project Quality objectives have been met.

ƒá Preparing documentation for cut-over and 'P' MCCs.

ƒá Preparing and checking hand over documentation prior to final submittals.

Saudi Arabian Kent, Saudi Arabia

Project: Shaybah Gas Compression Upgrade / Saudi Aramco

Position: Sr. QA/QC Supervisor

ƒá Ensuring the Construction Contractor & Subcontractor Personnel complied with the Project Quality Program.

ƒá Attend meetings with SAPMT and Project Inspection.

ƒá Weekly & Monthly Quality Reports preparation and submission to QA/QC Manager and Company Corporate QA Manager.

ƒá Ensuring all quality records have been completed.

ƒá Prepare hand-over documentation.

ƒá Ensuring subcontractor QC personnel comply with the requirements of Aramco Specifications, relevant Project Standards and Project Quality Program

Oct. 04 - Jun. 05: Saudi Arabian Kent, Saudi Arabia

Project: Zuluf GOSP 2 Project (Offshore) Saudi Aramco

Position: QA/QC Supervisor

ƒá Ensuring the Construction Contractor complied with the Project Quality Program.
ƒá Attend meetings with SAPMT and Project Inspection.
ƒá Ensuring that the system cut-over was carried out as per the schedule and that all QEIL items were actioned and closed out.
ƒá Supply look-ahead activities schedule for Project Inspection.
ƒá Ensuring redline drawings were correct prior to submitting to Saudi Aramco.
ƒá Ensuring all quality records has been completed.
ƒá Ensuring Project Quality objectives have been met.
ƒá Prepare hand-over documentation for SAPMT.

Sep. 03 - Sep. 04:Saudi Arabian Kent, Saudi Arabia

Project: Qatif Gosp 2 Project / Saudi Aramco

Position: Sr. E&I QA/QC Inspector

ƒá Checking all installation have been carried out by the Construction i.e. Instrument Installation, Conduit & Impulse tubing installation, wiring termination, Megger testing, process Hook-up installation, Pressure testing, Witness of Calibration and loop check.

ƒá Cheeking all electrical work installation, Conduit, Cable tray, electrical equipment, Witnessing Megger / Hypo test for High and Medium voltage. Witnessing Electrical system pre-commissioning activities.

ƒá To ensure that all inspection and test records are properly documented and made available for handover. QEIL and FEIL are properly documented and updated as per SAEP-1023.

ƒá Carried out inspection of materials to make sure it meets the requirements of project specification.

ƒá Ensuring all approved drawings used in Aramco Projects are within the requirements of SAES, SAMS, NEC and mandatory drawings.

ƒá Preparing punch list, making surveillance of construction activities stage by stage.

ƒá Maintaining all documents for internal quality audits, in accordance with time scale for the project quality plan.

Sept. 01 - Aug. 03: Saudi Arabian Kent, Saudi Arabia

Project: Ethane Recovery Project
Berri Gas Plant

Position: E&I QC Senior Inspector

ƒá Preparing punch list, making surveillance of construction activities stage by stage.
ƒá Checking all installation have been carried out by the Construction i.e. Instrument Installation, Conduit & Impulse tubing installation, wiring termination, Megger testing, process Hook-up and Pressure testing.
ƒá To ensure that all inspection and test records are properly documented and made available for handover to the QEIL and FEIL are properly documented and updated as per SAEP-1023.
ƒá Witness of calibration loop checks procedures.
ƒá Carried out inspection of materials to make sure it meets the requirements of project specification.
ƒá Ensuring all approved drawing used in Aramco Projects are with in the requirements of SAES, SAMS, NEC and mandatory drawings.
ƒá Maintaining all test documents for internal quality audits, in accordance with time scale for the project quality plan.

Feb. ¡¦01 - Aug. ¡¥01:Saudi Arabian Kent, Saudi Arabia

Project: Inlets & Auxiliary Facilities Hawiyah Gas Plant

Position: Instrument QC Inspector

ƒá Checking all installation have been carried out by the Construction i.e. Instrument Installation, Conduit & Impulse tubing installation, wiring termination, Megger testing, process Hook-up and Pressure testing.
ƒá Witness of calibration loop checks procedures.
ƒá Preparing punch list, making surveillance of construction activities stage by stage.
ƒá Carried out inspection of materials to make sure it meets the requirements of project specification.
ƒá Ensuring all approved drawing used in Aramco Projects are with in the requirements of SAES, SAMS, NEC and mandatory drawings.
ƒá To ensure that all inspection and test records are properly documented and made available for handover to the QEIL and FEIL are properly documented and updated as per SAEP-1023.

Nov97 - October-00: Saudi Arabian Kent, Saudi Arabia

Project: SCP - 55
Saudi Aramco / B.I. 2002

Position: Instrument QC Inspector

ƒá Inspecting all instrumentation systems for compliance with the approved S.A.Kent Quality Programme, Project Specification and Saudi Aramco Standards and Codes.

Aug,96- Sep,97: Saudi Arabian Kent, Saudi Arabia

Project: Rabigh Power Plant

Position: Instrument QC Inspector

ƒá Ensuring that all installations have been carried out as per Specifications and Standards
ƒá Carrying out Inspections and preparing Punch list reports
ƒá Checking completed corrective actions and sign-off punch lists
ƒá Witness cable and loop checks to systems
ƒá Checking grounding tests

Dec,94-Mar,96:Olayan Descon Industrial Co. Ltd.

Project: R&D Riyadh, SASRAF,& SADAF

Position: Instrument Technician / Instrument Inspector

ƒá Ensuring that all instruments were correctly calibrated in the workshop and in the field prior to loop-checking
ƒá Inspecting instrument installations and ensuring compliance with Standards
ƒá File reports with the QA/QC Manager
Prepare Hand over Test Packages

March,91 - May,94:National Petroleum Construction Co., Abu Dhabi

Project: ADMA-OPCO, ADGAS & ZADCO
(Offshore &Onshore)
Position: E&I QC Inspector.

ƒá Checking all installation works carried out by the Construction Contractor complied to Standards.
ƒá Review drawings and test certificates.
ƒá Prepare Exception Item List prior to Partial Mechanical hand-over to Client.
ƒá Check corrected punch list items.

May,90-Dec,90: Qatar General Petroleum Corporation

Position: Instrument QC Inspector

ƒá Checking and reporting to the QA/QC Manager all Construction Installation activities.
ƒá Ensuring that installations comply to the Client's Standards.
ƒá Prepare documentation to release hold points.
ƒá Check materials comply with Specifications..

Feb,86-Nov,89: Bells Controls Ltd. (India Joint Venture)

Project: Sangruli Thermal Power Project

Position: Instrument Technician / Instrument Inspector

ƒá Ensuring that all instruments were correctly calibrated in the workshop and in the field prior to loop-checking
ƒá Inspecting instrument installations and ensuring compliance with Standards
ƒá File reports with the QA/QC Manager
Prepare Hand over Test Packages

I have confidence in my own abilities and am prepared to standby difficult or unpopular decisions. I do not hesitate to take over new responsibilities, nor to try out new and innovative ideas.

I analyze complex situations by studying multiple causes and effects, taking particular care to verify every side of an idea or situation to ensure that all outcomes are adequately weighed on their merits.

I use my knowledge and experience of past situation to adapt and apply to problem solution and to ensure sublimation of corporate goals.

I am only too happy to share information with colleagues, to encourage them to offer feedback, and to praise them for their contributions. I address conflicts and issues within the team, using emotional intelligence positively to harmonize team dynamics to achieve corporate goals.

I take extra care to build up a focused ambience and work culture to draw out the best professional contributions from the team members, both by eliminating all handicaps, and by rendering their professional involvement a memorable period.

I have a predisposition and humility to learn at every stage, as learning never stops and is a continuous process. I am also very organized and communicative.

LANGUAGES KNOWN: English, Hindi, Urdu, Arabic

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6601 to 6650 of 9777)

Go to Search Parameters...

Brief Description

Behavioral Based Safety, Ergonomics, Human Factors, and Oil and Gas Construciton Safety Professional

Recruitment Specialist/HR Generalist

air cargo, logistics hr hse

M.Sc. (Geology),Reservoir Simulation, PVT analysis, EOR, WSO, Data Management, Reservoir Field Operations, Well Test Analysis, Material balance, Field monitoring.

Experience in handling and Interpretation of Satellite images (LISS and PAN) Working knowledge of ICP-Atomic Emission Spectrometry, Xraydiffractometer (XRD), Digital Spectrophotometer and Digital Flame photometer. Detailed field works carried out in the preparation of Hydrogeomorphology and St

Senior Planning Engineer - 13 years Oil&Gas experience

Strongly involved in pollution prevention, management and control. Participated in pre-treatment of drilling oily wastewater/mud waste treatment in Agip-Saipem Rig -23. Presently exhibiting level 1 standard in Environmental protection. Good knowledge of design/fabrication of engineering facilities

Telecommunication, Health, Safety, Environment and Security Coordinator

Project Engineer (Instrumentation & Control)

Extensive expirence on multiple pieces of heavy equipment: track-hoe,dozer,back-hoe,scraper,8-15 ton carry deck cranes,fork-lifts&Lull/JLG,manflifts,Class "A" CDL A - NCCER Millwright,boilermaker,and rigging expirence as well

German graduate Structural and Optimization Engineer with 5 years experience in the German industry with a practical experience and familiarity with modeling&optimization softwares(like CASERII,ANSYS,ABAQUS,iSIGHT)

Qualifications: B.Sc.(On Petroleum Drilling and Production), University of hydrocarbon and chimistry, Boumerdes, Algeria, Jun-2001.

3 + Years of experience in petrochemical industry-Electrical Engg

Marine mechanical engineer with good HSE and safety asspects

Petroleum Eng., Reservoir Eng., Highly Computer Skills, OFM Program and Eclipse Simultor, Well test Analysis, Open &cased Hole Logs Interpretation

Trouble-shooting and responsible to develop, coordinate and implement maintenance projects, understand customers, competitors and suppliers, from both an information and strategic viewpoint. Developing and mentoring technicians and also provide support for hardware and software maintenance.Exp:4yrs

Please find enclosed a current copy of my cv. I am extremely well qualified in Oil/Gas HSE and am well suited for this environment.

Mechanical Maintenance professional with exceptional interpersonal and communication skills and an extensive background in following broad based competencies: Static/Rotary Equipments Inspection/Repair, Gas Turbine O/H,ATR Material & Manpower Planning, SAP 4.6C PM & MM Module

male, 28 age years old. I have worked for Schlumbeger as Coiled tubing Field Engineer from 2000-2003. Now I work in Malaysia as a Coiled tubing consultant for Schlumberger.

Award-winning, highly accomplished and motivated professional with over all four years of proven track record of rapport-building, resourceful problem-solving, communication skills, also with substantial experience in Techno-managerial capacity.

4 year experienced Structural/ Operations/ Drilling Engineer. Working for a well known oil giant in Houston TX. Speak Fluent Arabic and English. Looking for a job in the Middle East.

Developed test procedures and tested Power Plant Training Simulation/waste water treatment/Marine process simulation software. Developed flow and high-performance computing. Software packages like simulation, performance and optimization Package for Power Plant.

I am a process engineer with over 4 years of experience to offer you. My recent experience was an operation engineer in a petroleum company,

10+ years experience in industrial and petrochemical, installations both onshore and offshore. Commissioning, construction, maintenance and inspection. Refineries, Gas Terminals, Offshore Platforms, F.P.S.O’s, F.P.U’s Pharmaceutical, Petrochemical, Power Stations, Gas Compressors and Generators.

Chemist with oil/petroleum experience.

Greetings, I'm available to provide survey services. I'm experienced in "base camp" situations and logistics.

COMPUTER KNOWLEDGE: Done specialized CAD R 14, 2000, 3D modeling Auto Cad 2002 and 3D modeling Micro station 95, micro station J Courses with special reference to Drawings / Designs MS OFFICE msword,excel,power point

instrument & Control engineer exp. in marketing of Temperature measuring inst. since 2000

Objective: To utilize my computing and interpersonal skills in the Computer information industry.

Geological Technician Denver, CO

I am BE Chemical Engg from India, passed in 2000,was a gold medallist. I have experience from production to process engg and from administrative to marketing. I have worked in almost all areas of my stream to get the awareness of each part.

I hold a master of science degree in geophysics with geology background. I only practiced eight(8)months as seismic data acquisition geophysicist since after my graduation. At present I am a practising drilling fluids engineer.

I am a graduating chemical engineering student from the University of Waterloo. I have completed 6 work terms, 5 that were in the oil industry. I have had an excellent experience in each of these positions and have gained a wide range of skills that can be applied in the oil/petrochemical industry.

-welders/welding procedures qualification -piping erection -static equipment installation -material control

- Four years of experience as Petroleum Technologist in Schlumberger Oilfield Services. - I am familiar with the Technical aspects and Physics of hi tech logging tools. - I have undergone specialized training on Open hole tools and hold an excellent safety record

In spite of having a degree in Mechanical Engineering I’m willing to work on an entry-level categories in drilling industry. Looking at my skills and abilities, I assure my employer that they will be satisfied on every result of all my efforts.

To provide information in respect of the background.

Reservoir Engineer, with 10 years experience both in oil and gas fields. Reservoir simulation studies. Assets acquisitions. Waterflooding

Inspection Specialist with more than 10 years in the Oil, Gas, Petro-Chemical and Power Industries, who utilizes strong organizational skills to identify and resolve technical issue and leadership abilities to maximize team talent and effectiveness.

Objective: To obtain a position where my experience, analytical skills and understanding of computers, networking, security and software can be used to solve engineering challenges

Job in QC analyst

I am holding BE in Mechanical Engineering and seeking a responsible & challenging career in any field of Mechanical Engineering, in a progressive organization as a junior engineer or trainee engg.

Process/Instrument Technician with 10 years experience in Fault finding, construction, commissioning of various types of pneumatic and electronic instrumentation used within the oil and Gas Industry.

To seek further challenges as an engineer or related position where a diverse background and proven technical expertise used and advanced.

A highly dedicated Turbine Supervisor whom is very thorough and reliable. Over 10 years experience with rotating equipment including gas turbines and compressors, steam turbines, and high pressure pumps. Currently the Turbine Installation Supervisor at the New Gas Fired Esperance Power Station.

MS (Powerpoint/Word/Excel), Adobe (Illustrator/Photoshop), Language (Bahasa Malaysia/English/Mandarin)

I understand from your advertisement that there are openings in reputed company for various posts with challenging responsibilities. I have special interests in QA/QC and wish to offer my services as QA/QC Manager/ Supervisor.

Highly motivated self driven individual with 20 years experience in the Industrial electronic, Instrumentation, processcontrol, IT and communications field. Specific experience in the mining and engineering field in managerial positions.

Seeking to get a job opportunity which ultimately leads to a prestigious career where my analytical & communication skills are developed and applied in Electrical power Engineering

Profile: A Senior Logistics Co-ordinator, experienced and highly motivated with an extensive background in remote site operations. Experience has been gained working on Oil and Gas projects covering all aspects of Personnel and Material logistics based on a practical background with-in the off-sho

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 [ 133 ] 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out