Resume - UBD Advisor / Specialist

Misco Jobs

Resume #73607

CONTACT INFORMATION:
View contact information...

EDUCATION
1988 – 1991 SOUTHERN ALBERTA INSTITUTE OF TECHNOLOGY
Calgary, Alberta, Canada
Petroleum Engineering Technology, Production Major

EMPLOYMENT EXPERIENCE
Oct 07 – Present Underbalanced Drilling Advisor
TOTAL E&P Yemen, Republic of Yemen
* Ensures UBD operations are conducted safely and in compliance with TOTAL Company Rules were applicable.
* Assist with development of TOTAL Company Rules relative to UBD operations.
* Conducts UBD inductions on-site for all new personnel.
* Review / update UBD procedures and practices as required.
* Report non-conformance, potential, or near-miss incidents; while tracking all accounts.
* Audit operations and recommend any changes necessary to improve safety.
* Performs engineering tasks to optimize UBD activities for; reduction of costs, performance improvement and maximize efficiency (Daily program, analysis of the flow, optimization of injection parameters and procedures).
* Advise on Drilling contractor and UBD operation interface improvements.
* Prepare the UBD program and the End of Well Report for the UBD operations in relation with Head of Drilling and Completion Engineering.
* Work in Close relation with the DCM to assist in achieving UBD objectives for each well.
* Teach DCM proper UBD techniques and principles.
* Facilitate post well meeting at the TOTAL E&P Base in Sana'a.
* Coordinate meetings between service providers and TOTAL regarding UBD operations / issues.
* Follow-up action points relative to learning's and recommendations.
* Assist the DCM with supervision of the UBD rig up and critical operations.
* Conduct commissioning of the UBD system prior to start-up.
* Coordinate UBD pre-spud meeting with on-site drilling and production teams.
* Advisor for daily UBD operations on and off site.
* Monitor UBD trends and make recommendations to the DCM as necessary.
* Validate the data sent to the Reservoir engineer in Sana'a.
* Assist in trouble shooting UBD circulating system and/or data acquisition problems.
* Liaison with DCM, FSI and Logistics for planning operations and for potential conflicts in operations (e.g. permit to work).
* Assist DCM w/ preparation and peer review of written work instructions.
* Attend operational and safety meetings.
* Ensure all personnel are informed of on-going operations and or any changes (1 to 1 comms if required).
* Conduct quality control checks of UBD data.
* Constant liaison with Service Providers to pre-empt potential problems with equipment and or plan service required off critical path.
* Custodian of the P&ID Management of Change document.
* assisting with implementation of an optimization plan to; improve technical performance and overall project cost.
Oct 06 – Sept 07 Coil Tubing Underbalanced Drilling, Project Manager
Margham Dubai Establishment, Dubai Emirate, UAE
* manage and promote safety program, safety promotion and compliance
* manage daily CTUBD operations for 18 gas well redevelopment campaign
* conduct engineer, CTUBD well design
* prepare well specific CTUBD program
* conduct P10, P50 & P90 AFE costing analysis for UBD
* manage daily, per well and project cost control
* manage daily operations and logistics
Sept 05 – Sept 06 Underbalanced Drilling, Project Manager
TOTAL E&P Yemen, Republic of Yemen
* write UBD operational and contingency procedures
* facilitate tender evaluation process
* conduct HAZOP & HAZID on UBD, design criteria, equipment and operations in preparation for execution of UBD ops
* prepare and present UBD training program
* prepare UBD Program
* manage project start-up (mobilization of UBD equipment)
* prepare commissioning and familiarization documentation
* completed 2 well, new drill UBD project from conceptual design to execution including on site Engineering and Supervision
August 03 – July 05 Senior Underbalanced Drilling, Project Engineer
Margham Dubai Establishment, Dubai Emirate, UAE
* conduct technical UBD feasibility study for re-entry and new drill prospects in the Margham field
* conduct P10, P50 & P90 costing analysis for UBD
* engineer, UBD well design
* prepare "Scope of Work" documentation for UBD Tender
* write UBD procedures relative to scope of work and well design
* prepare UBD equipment specification documentation
* facilitate tender process
* conduct HAZOP & HAZID on UBD, design criteria, equipment and operations in preparation for execution of UBD ops
* manage project start-up (mobilization of UBD equipment)
* prepare commissioning and familiarization documentation
* completed 2 well, new drill UBD project from conceptual design to execution including on site Engineering and Supervision
April 00 – April 03 Senior Underbalanced Drilling Engineer/Supervisor
Shell Expro, Southern Sector North Sea, UK
* contract to Shell Expro for underbalanced drilling supervision offshore aboard the Sante Fe – Britannia, Monarch and Endurer
* accountable for safety and performance during UBD operations
* provide technical and mechanical engineering support to all aspects of underbalanced drilling operations: HS&E management, UBD surface and subsurface operations, UBD tripping and snubbing, UBD well control
* manage operational procedure changes, lateral learnings and daily written work instructions
* orientate and train new crew member
* liaison daily drilling operations w/ Shell Expro base in Lowestoft
* underbalanced drilling supervisor, 3 well project for Occidental of Oman
* GIT advisor for PDO, UBD projects in Oman
1998-April 00 Senior Underbalanced Drilling Engineer/Supervisor
Tesco Drilling Technology, Calgary, Alberta
* Engineering team leader for YPF/Repsol underbalanced drilling project in Western Argentina. Design and execution.
* project manager for UBD operations at Pluspetrol's, Ramos 1003 location in Northern Argentina. Design and execution.
* Engineering team leader for Latin America, orientate and train rig crews in underbalanced drilling procedures.
* optimizing underbalanced drilling operations through reservoir modeling with Neotec multiphase flow software
* planning of horizontal, vertical and reentry wells in a variety of lithologies
* writing feasibility studies and underbalanced drilling programs
* on-site technical supervision of underbalanced wells
* interpretation of well site data
* composing post well analysis
* evaluation of equipment bids for customer
* researching technical data for paper submissions
* formulation of programs for casing and drill string design, equivalent flow rates, air drilling volumetric requirements and snubbing operations
* assist in development of software pertinent to underbalanced drilling
1995-1998 Senior Production Supervisor
Novus West Petroleum Pty Ltd.
Perth, WA
* Supervise personnel for operation/maintenance of all gas lift and production operations (Airlie Island Offshore Oil Project)
1993-1995 Production Supervisor
Apache Oil and Gas
Perth, WA
* Supervised personnel for operation/maintenance of monopod offshore production facilities (Harriet Oil and Gas Field)
PROFESSIONAL DEVELOPMENT
2007 Certificate – IWCF #S43856 / AD 341 / 0459
IPC, Abu Dhabi, U.A.E.
2007 Certificate – HUET
Abu Dhabi, U.A.E.
2002 Certificate – GSF, Safety Focus I
Norwich, Britain UK
2002 Certificate – Advanced Safety Leadership
Norwich, Britain UK
2002 Certificate – PDO HSE & H2S Introduction
Muscat, Oman
2001 Certificate – H2S Rescue
Petroleum Industry Training
Calgary, AB Canada
2000 Certificate – Basic Offshore Safety
Petans Limited, The Training Centre
Norwich, East Anglia UK
2000 Certificate – Skiff Project, Underbalanced Drilling
Familiarization Course
* The case for Underbalanced Drilling
* HSE Management Issues
* Underbalanced Drilling Operations
* Underbalanced Tripping and Snubbing
* Underbalanced Well Control
Shell Base, Lowestoft East Anglia, UK
1999 Certificate – High Speed and Defensive Driving
Alberta Motor Association
Calgary, AB Canada
1998 Certificate - Modern Safety Management
DNV (Det Norske Veritas)
Perth, WA
1996 Certificate – Breathing Apparatus and Firefighting Course
RCS Emergency Safety Training Pty Ltd.
Fremantle, WA
1996 License – Restricted Radio Operator License
Department of Transport/Maritime Division
Perth, WA
1996 Certificate – Equipment operations/National Plan to combat pollution of the sea by oil
Department of Transport/Maritime Division
Fremantle, WA
1996 Certificate – Natural Gas engine operation and maintenance
Oceanic Compression Services
Vicksburg Platform, WA
1996 Certificate – Senior First Aid
St. John Ambulance
Perth, WA
1996 Certificate – Helicopter underwater escape training and basic sea survival
Industry for Accident Prevention (IFAP)
Perth, WA
1995 Certificate – Train the Trainer
Technical Operation Training School (T.O.T.S.)
Perth, WA
1994 Certificate – Class B Gas Fitter
Canadian Gas Association
Victoria, British Columbia, Canada
1995 Certificate – Sonolog, Dynamometer Course
Expertest Pty Ltd.
Cooper Basin, SA
D.O.B. 27 March 1961
D.L.# Alberta 57829-574, Dubai 739087
Citizenship Canadian/Right to Abode in the UK/Portuguese resident

Passport # Canadian BA342770 – Expires 28 November 2012

Marital Status Married – 2 Children

References available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4351 to 4400 of 9767)

Go to Search Parameters...

Brief Description

reservoir engineering petroleum engineering reservoir modeling simulation production profiles

Familiar in process control operation with Honeywell TDC-300DCS and Fox Pro. System.Can operate all plant auxillaries and utilities.Can do mechhanical trobleshooting/repair of all plant equipments.

Mastery in the use of Synthetic & various kinds of water based muds which I have worked with and used in various projects for the last Seven years. Mastery in the use of Fluids Reporting and Engineering systems.

QAQC Co-Ordinator

Pressure Vessel Design Engineer

SAP MM professional with a total experience of over 11 years and SAP MM experience of over 2 years in implementation and support

Well Site Drilling/ field & HSE Engineer

Inventory Management, Cataloguing, SAP, Functional, Standardisation, BOM

Pre-commissioning/ commissioning, completions management on sveral Oil & Gas facilities globally

DATTARAM Scholarship for highest aggregate marks in Geology during three years graduation.

20+years wide variety of experience willing to work anywhere

Skilled in Power Plant Operations and computer literate.

crane &heavy equipment operator,mechanic,welder & service manager

Over 17 years experience in the Oil & Gas industry as Contract Administrator.

I have more than 11 years experience in Design, Selection and Engineering of Mechanical Equipment and Packages in Oil and Gas Industries (Onshore & Offshore).

JOURNEYMAN MILLWRIGHT/FOREMAN 26 YEARS OF PROGRESSIVE EXPERIENCE AND DETAILED ORIENTED GOLD AND RED SEAL (V1984) JOURNEYMAN MILLWRIGHT/FOREMAN EXPERIENCED IN CONSTRUCTION AND PETROCHEMICAL PLAN ENVIRONMENTS

I have 27 + years experience in Oil/Gas/Power Generation & as On Job Trainer

I'm interesting for any Technician position , I have more than 14 year's experiences in all kind of electrical and electronic instruments Perform Preventive Maintenance and repair

A highly motivated and resourceful Engineer / Supervisor with experience in the Oil Industry with international companies in the construction and upstream sectors.

A Petroleum Engineer with an MBA degree & about 8 years of experience with major E & P operators. Reservoir engg, reservoir modeling, prod surveillance, well completion & economic evaluation. A team player with excellent communication skills with strong focus on HSE.

Within my 8 years career, I have acquired Project Management and Contract Administration experience in the Oil Industry. I have developed my abilities at articulating and realizing project and contract management strategies from predefined or self-conceived objectives.

OIL AND GAS OFFSHORE OPERATION and PRODUCTION SUPERIVISOR/SUPERINTENDENT

Mechanical Engineer with 17 years Exp in Oil&gas/Refinary & power Sector as Sr .Manager with Triune Projects Pvt Ltd, New Delhi Key Skills: Project Management, Construction Supervision & Management, Testing & commission, Maintenance Management

I am goal-oriented, able to focus on the task with proven reliability to get the job done. As a graduate from Merdeka University of Malang, majoring in Mechanical Engineering, I pursue my career in Mechanical Engineering field or general Management.

11 years Administration/user level experience in the field of 3D Plant design Systems (PDMS/PDS) catering to the industry of petrochemicals, Refineries with strong piping background. Presently working with Fluor Daniel India Pvt Ltd, Delhi as PDS Coordinator.

i have over 17 years experience with diesel and hydraulics mechanical and automotive installation and trouble shooting i am looking for a position where my experience would reduce downtime and improve production

8 years of drilling engineering experience. Drilling and workover engineer, junior drilling supervisor, well site drilling engineer, bits optimisation engineer. Bits, stuck pipe & well control contracts manager and cost management project engineer.

Health Safety Environmental Manager & Engineer. Safety Engineering Degree. Bilingual Spanish-English. Significant experience in the oil & Gas industry.ISO-14000 Certificate. PSM Process safety Management and QRA Quantitative Risk Assessment background HSE Auditor

Operations, Drilling and workover technical, 26 Years experience in oil and gas industry, experience work in the jungle and some off shore.

Geological/ Production Engineer Main interests include Drilling and Exploration

I enjoy tackling challenges that stretch ability and stimulate development as this offers me the opportunity to apply my analytical skills and release my untapped potentials.

UBD Advisor / Specialist

Experienced offshore and onshore crane operator

Skills in Safety management system, Emergency coordination and handling. Operation and maintenance of Fire & safety protection systems. Construction safety.

Cable pulling Transformer and panel Erection &Installation

I am a B.E mechanical engineer,having more than 3 years of working experience in oil & gas industry as a welding engineer.i am cswip 3.1 and ASNT level II in RT,MT,PT

Calculating hydrocarbon reserves, analyzing water flood performance evaluating economic viability. Calculating mud weights considering pore pressure and the fracture gradient of the rock. Planning and conducting fracturing and other stimulation operations. Implementing and monitoring safety

Auto-CAD,Microstation,MS Office, SPOOLGEN,Familiar with PDMS,CEASAR II ,Bachelor of engineering(Mechanical)

A diligent, personable and experienced Electrical Engineer with concentration in control engineering seeks a challenging position.

To attain a challenging and rewarding character in IT enabled sector.

I can work over time pressure. A fast learner.And willing to work overtime

A versatile, analytical and hardworking Material Controller and Marine Logistics individual; with a practical hands-on approach, always preserve to achieve the best results on time. Able to collect, analyse and solve information/problems, digest facts / figures and quickly grasp.

Procurement, Contracts

9 years Experienced, Well operation & testing, SRU H2S Removal & Crude Sweetening Plant, Oil Shipping and Storage, PLC DCS Panel Control.

Bachelors - Mechanical Engineeing Technology

Piping Designer PDS CAD

Career Objective:To be effective and efficient team member in Petroleum organizations, achieve Organizational and Individual goals. Completed M.Tech (Petroleum exploration) 1st year (1st&2ndsem) with 73%marks with specialization of Reservoir managements and Hydrocarbon Exploitation from June-2006 in

HSE Advisor with 10 years international QHSE work experience primarily within the oil and gas industry. Broad ranging experience was gained whilst working for various multinational companies in 10 countries across 6 continents.

Handle oil and gas processing plant as a operation my qualification is diploma in chemical technology

Objective: To work in a responsible and challenging position as a crane operator/deck foreman/crane inspector.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 [ 88 ] 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out