Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #74092 next resume »»
CONTACT INFORMATION:
View contact information...

Position Applied: SR.PRODUCTION / PROCESS OPERATOR

Nationality: INDIAN

Date of birth: 20/06/1972

Qualification: B.E, (Mechanical Engineering),
April 1994, University of Madras.
Diploma in Computer Applications.

Languages Known: English, Arabic,Tamil, Hindi & Malayalam

Experience: 14 Years in Oil / Gas fields.
8 years in abroad.

COMPANY POSITION PERIOD
HAROUGE OIL OPERATIONS, AMAL. DESERT BASED, TRIPOLI-LIBYA, M/S CRADDOCK ENGINEERING ¡V UK. SR.PRODUCTION / PROCESS OPERATOR AUGUST 2007 TO JUNE 2008
ZAKUM DEVELOPMENT COMPANY (ZADCO), ABUDHABI OFF-SHORE, M/S GOLDEN STANDRD TRD U.A.E SR.PRODUCTION OPERATOR AUGUST 2000 TO AUGUST 2007
OIL & NATURAL GAS CORPORATION LTD (ONGC), ON-SHORE & OFF-SHORE, INDIA.
PRODUCTION OPERATOR
JUNE 1994 TO AUGUST 2000

DETAILED CURRIULUM VITAE OF G.PARTHIPAN
Summary of Experience:-

Oil and Gas Gathering Stations Gas Chilling Unit (Propane) / LPG Unit
Off-shore well head & production Platforms Work Over / Well Completion / Well Test
Control panel operation Well head Gas Lift Operation ¡V Desert Based
Crude oil Stabilization Unit Central Production & Tank Farm
Gas Dehydration Unit (Glycol) Water Treatment & Injection Plant

JOB DESCRIPTION

Oil and gas Gathering Stations (DCS):
Operation & control of Wells, Oil Manifolds, Gas manifolds, Surge Tanks, Separators (Two/Three Phase), Test Separators, Dehydration Tanks, Water disposal Pumps, Crude Transfer Pumps, Chemical injection, Gas/Oil line pigging operations, Well Testing & Daniel orifice plate changing, etc. Glycol Contactors, Glycol Regeneration unit, Routine sampling of oil, gas, Glycol, Condensate. Isolation & De-Isolation of equipments. Gas testing, trouble shooting and Reporting.

Central Production Facility and Tank Farm:
Receiving crude from different Gathering Stations, Dehydration unit, Desalination Tank, Produced Water Tank, Skimmer Tank, Storage Tank Operation, Emulsion Treatment by Electrostatic Heater-Treater, Demulsifier injection pumps, injection rate Calculations Desalting crude through electric desalters, Crude transfer pump LACT unit, PIG launching & receiving, Preparation of production reports, DCS and SCADA Operations.

Control Panel Operation:
Conversant in handling of all types control panels, Central control panel, Local control panels, Pneumatic control panels, valve mounted control panels, Various types of valves PCV,LCV,FCV,TCV, Hydraulic valves & Hydraulic units, fisher controllers, Gas detectors, U.V. detectors, Foxboro and Honeywell instrument panels and DCS systems.

Crude Stabilization Unit (CSU):
Three phase horizontal separators. Designed to remove light hydrocarbons and water from the incoming well fluid from oil wells and to produce stabilized crude oil. Equipments: High pressure separator, Medium pressure separator, Low pressure separator, Zero pressure vessel.

Heater Treater & Pre-Heaters:
To separate deeply associated water particles in the crude oil by heating. Heater treater is a horizontal compartmental vessel which uses vessel gas as a fuel gas.

Off Gas Compressors (OGC):
This unit is designed to compress low pressure gas from the crude stabilization unit L.P. separator. Compressor type: 3 stage centrifugal compressor. Demag ¡V Germany.

Gas Dehydration Unit:
Maintain the level and pressure of the Contactor, Coalescer, Separator & Flash tank-Maintain the re-boiler temperature ¡V operation of Glycol circulation pump ¡V HP separator and OFF-Gas compressor together feeds gas to Dehydration unit ¡V Operation of re-boilers Glycol Contactor, Lean & Rich Glycol heat exchanger, Flash & Surge tanks operation and reflux condenser, Stripping Gas flow rate. Chemical injection such as Demulsifier, Methanol, Corrosion Inhibitor, scale Inhibitor.

Gas Chilling Unit (Propane):
Operations of propane Compressor, propane Chiller, Gas-Gas Exchangers, Propane Accumulator, Propane Economiser, Propane Coolers, Low Temp.Separator, Hot Gas Utiliser, Joule's Thompson Valve Operation, Methanol Injection & Calculation, Flash Separators, NGL Unit, NGL storage Tank.

Condensate Fractionation Unit (LPG recovery unit):
This unit produces 165TPD LPG & 52.7 TPD natural gasoline (NGL) by processing total 302 TPD consisting of condensate receiving system. Surge drum, Filtration, light end fractionation, LPG column, residue gas compressor, Expander compressor, H2S wash tower, lean gas compressor, feed gas chiller, dryer.

Water treatment and water Injection Plant (DCS):
Operation and Control of Still well, Lift pumps, Hydro cyclones, Pre strainers, Coarse strainers. Maintaining efficiency of Dual media and Multi media filters, Sand filters, Filters backwash sequence, Filtered water storage tank(75000 bbls), Feed pump, Extract pump.Deaerator towers where removal of oxygen to 5 ppb by 1). Mechanical method using Vacuum pumps which consist of two stages. Where first stage vacuum is less than 50mmHg and second stage vacuum pressure is less than 20mmHg which is achieved by Ejector. 2) Chemical method using chemical oxygen scavenger at 10ppm, injected in carrier water line and distributed over cross-section of the vessel by header and laterals type distributors.Water injection at 3000 PSI by high pressure multistage centrifugal WEIR pumps(ten stages) 660m3/hr, driven by GEC ALSTHOM motor at 3.5 MW. Gas engine driven Reciprocating plunger multistage pumps(Wilson Snyder and Ingersolrand pumps). Well head operations like collecting well data, Orifice, choke changing etc.. Plant capacity is around 500000 bbls/day.

Tank Farm:
Ullaging, sampling, temperature measurement, line up the system for loading or discharging, line up for internal cargo transfer, cleaning the shore tanks from dirty to clean. Refinery feeding tanks & receiving products from refinery. Visual inspection for any line up and after starting the operation for may be leakages. Operation of cargo transfer pumps. Handing cargo - crude, naphtha, gas oil, fuel oil, monitor the pump initial operation for seal leaks, bearing temperature, lub oil level. Operation of caterpillar diesel generator's. Capacity I MW. Handling diesel engine fire pumps. Gas oil truck filing station operation. Handling WEMCO unit. Handling foam pumps and fire systems. House keeping in tank farm area.

Off-Shore Production Platforms:
Well experienced in offshore, well head & production Platforms, Well completion, Start-up and Shutdown procedures, Control Room Operations, Emergency Procedures, Water injections, Gas Compression, Oil Shipment, Chemical Injection- handling multi stage Shipping pumps- Gas Compressors, three phase Separators, Well testing, Flow Choke adjustments, Daniel orifice plate changing in live line, K.O drum, Closed and Open drain vessels ¡V Oil and Water injection Manifolds- 24" Pig receiving & Launching operations in Oil, Gas & water inj. Lines. handling Diesel and Electric fire water pumps, Jockey pumps, Chlorination units, Sewage units, Emergency diesel generators, Deluge & Sprinkler systems, Hypochloro units and Halon systems, Chemical dosing pumps, dosing rate checks, oil and gas sampling, all isolation and deisolation procedures, water flushing, & Nitrogen purging. Production: Oil 2,10,000 bbls/ day, Gas 42mmscf/ day

Well head Operation:
Well opening & Closing Operations, well Testing flow flushing jobs, PIG launching & receiving inspection of pipelines for leakage and puncture. Isolation & hand over wells services for perforation, Tubing clearance, SSV & SSSV operations, Well head Panel (Baker)Operations, Flow line Choke changing, Safety valve Testing, Master valves, Annulus Valve, wing Valve and Crown Valve Operation.
Work over & Well completion:
Installation of different types of X-Mas Trees namely Breda, Cameron, FMC, IKS-NKM, BHEL, Vetco Grey etc including injection of Plastic Packing, running control line for Single and Dual completion, function and pressure testing of X-Mas Tree and SCSSV, conversant with Hydraulic Shutdown Panels and Single Well Control Panels, using in Production and well completion/Work over. Installation and removal of BPV and DCV under pressure. Preparation and pressure testing of Well Completion sub-assemblies as per program of Well Services. Well conversant with Halliburton ¡V OTIS, Baker and Camco Down hole equipment's viz. Expansion Joint, retrievable Hydraulic set Single and Dual Packers, Permanent Packer Seal Assembly, Tubing Retrievable SCSSV, Retrievable SCSSV, Landing Nipple type X, XN, F, R, Safety Valve Nipple type RQ, S, BA, Flow Coupling Gas Lift Single and Dual pocket Mandrel, Tubing Hanger, Swivel Sub, Blast Joint, Glass Disc sub various type Wire Line Re-entry guide and Side Slide Door. Servicing and testing of Single and Dual X-Mas Trees.

Production / Process Operations in Desert Based Field:
Operation of Natural Flow Wells, ESP (REDA) Wells & Gas Lift Wells, Collecting Production Data ¡V Tank Gauge, Meter Reading, Pump Rate, Gas Discharge PSI, Chart Reading, Heater Temperature and Number of compressor running & suction pressure reading. Daily Checking Liquid Recovery Units ¡V High & Low Pressure Sphere. Handling of Chemical Pumps ¡V Methanol / Wax Inhibitor / Water Pumps in Well Heads. Daily draining of Gas Lift Line Accumulators and Gas Lift Loop Line Accumulators and maintain the Gas Lift Gas rate. Operation & control of Wells Oil Manifolds, Separators (Three Phase), Test Separators, Dehydration Tanks, Water disposal Pumps, Crude Transfer Pumps, Chemical injection, Gas/Oil line pigging operations.

RESPONSIBILITIES:
„« Make regular checks of well heads, Separator, Instrument Air Kit and all measuring units to ensure that they are functioning properly as per the standard operating procedures.
„« Report all instrument and equipment defects and leaks immediately to my senior engineer and take necessary action.
„« To take reading from the Separator, well head, Gas injection line, Main line and water injection line.
„« In well testing each and every hour a variety of readings such as oil and gas flow, temperature and pressure and record unusual occurrence then reporting at my senior engineer.
„« Start, check stop diesel generator and pumps according to the instructions.
„« Open or close the water injection destruction and gas lift manifolds on the satellite which process platform to the well head platform.
„« Assist in isolating ¡V draining, Purging and handling over equipments for maintenance on inspection and check the equipments for correct operating when the maintenance job is completed.
„« Make the routine weekly run test of equipments like emergency diesel generator, diesel and electrical fire pumps.
„« With the guidance of senior engineer, Launching pigs into pipe line 8 and receiving pigs from pipe lines and check it for damages.
„« Unload chemicals into tanks for injection start and adjust the flow rate of chemical injections pumps as required.
„« Check the water, oil interface level in Sump Tanks and operate their pumps locally when they required.
„« Collect oil, Gas and Water Samples.
„« Initiate and lead fire fighting or other emergency action in my area until it is taken over by a higher authority.
„« Maintain good house keeping and ensure the platform is kept clean and tidy.

Safety Equipments Operations:
Familiar with handling of safety equipments H2S monitor hydrocarbon explosive gas Detection system, Fire detection System, UV detector, Smoke Detector, Gas detector, Deluge & Sprinkler System, Halon system, Handling Jockey pumps, Electrical & Diesel fire water pumps, Work permits, Hot work permit, Cold work permit, Vessel entry, Handling fire extinguishers like DCP, Foam type and Co2.

Safety Courses Attended:
* Survival at sea.
* Coxswain Course.
* HSE Induction / Orientation.
* First Aid course.
* Firefighting courses.
* H2S courses.

Extra curricular activities:
* Good player of Volley Ball, daily evening walk & Reading books.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 4101 to 4150 of 9785)Go to Search Parameters...
Brief Description
Petroleum Geologist 12yrs. Experience working in deepwater projects. Prospect Generation to Value. Landmark software, excel &power point. Good communication & presentation skills. Experience and success working with partners & governments. Good self starter and team player. Available ASAP.
12 years in the oil field, North Africa. Looking for position as Workover/Well services/completion/Well test Supervisor. Arabic/English speaker.
Instrumentation Engineer with over 12 years experience in Calibration, Installation, Loop Checking, Inspection, Commissioning and Maintenance of field instruments ,PLC and SCADA systems. Indian Citizen.
With more than 12 years in Petrochemical and Paper industry and in various positions and discipline.
Mechanical engineer with 12 years of experience inside the petroleum industry; specifically as Productivity and Production Optimization Engineer. Primary skills in well productivity, production technology and operations including well completions, well performance, stimulation and well testing
Highly motivated and intelligent, with sound commercial ability and well developed analytical skills. A proven self starter, creative and co operative team player with the drive and ability to work in challenging environments.
I am working in Power Plant from last 12 Years as a Instrument and Control Technician.
High Energy, trustworthy, successful, experienced, Senior Director of Credit, Collection, Accounts Receivable, Customer Service, AR Business System management, Operations and Administration looking to partner with talented, growth oriented company, on a temporary, contract or direct basis.
Strong Skills in Reservoir Monitoring & Surveillance coordination though team work integration for Gas & Water Secondary Recovery Projects. Reservoir definition & delineation through well data collection. Development Plans to assure production profiles requirements. Gas & Water Conformance.
To lead a team involved in the drilling activities of a growth oriented oil and gas servicing company.
Now working as Instrument Technician in Kursaniya Gas Plant (KGP) with Consolidated Contractors Company (CCC.WLL) in Kingdom of Saudi Arabia.
Plant Operator
Post graduate diploma in PIPING ENGINEERING AND TECHNOLOGY from Elixir institute of piping engineering and technology
Instumentation Engineer with 4 year of experiance in oil ,gas and power industry in EPC project.
Rover operator
Msc in industrial chemistry
At present I am working as a SAFETY OFFICER with an EPC contractor doing construction of double wall LNG tanks in Qatar .
Strong fundamentals and Design aspects of Mass transfer and Heat transfer operations & equipment involved in petroleum refining and Natural gas processing plants .Knowledge of HYSYS ,Hextran and HTRI softwares,for rating and design.
BTS EXPLIOTATION OF PETROLEUM .ALGERIAN OF PETROLEUM INSTITUTE.
GIS,Automated Mapping and Drafting; Mastering GIS principles and techniques
Bachelor of Petroleum Engineer Degree + Computer Office Programs + Autocad + work at drilling company as project engineer + Arabic & English languages + Driving License
Marine Maintenance Supervisor & Machinery Watchkeeper
Petroleum Engineer - 5 yrs -> Holding Bachelor of Science in Oil and Gas Engineering
Seeking assignments in Quality/Welding Inspection & Control for Piping, Pressure Vessel, Skid assembly, Pipeline, Plant Construction and project execution with a reputed organisation
About 5+ years’ extensive training and experience in Oil and Gas Refinery Environment on the field of Safety and Operations including LPG Facility.
I have gained five years of experience in the oil and gas industry with Woodside Energy Ltd in Australia, with expertise in subsea, completions, well services and production operations. I graduated with a Bachelor of Engineering (mechanical) with honours from the University of Tasmania in 2001.
INtools / SPI, Infomaker, control system, DCS, PLC, INtools Administration for Large Project.
Alexandru Ioan Cuza University of Iasi, Geology, specialty Geochemistry,
Fresher with M.Tech in Petroleum Technology and B.tech in Chemical Technology, willing to work in any part of the world.
Hydrograpic Surveyor
Operations and Engineering Manager with 19 years experience with an oil major. Work experience in Middle East, Azerbaijan and UK. Process engineering background with chartered status.
Piping Engineer with over 4 years of EPC Experience
B.Tech in Pertrochemical Technology having 4.5+yrs of experience strong knowledge in Hysis Both steady state and dynamics
Combined experience in design and construction
Chartered Safety and Health Practitioner (CMIOSH) working lately as High Risk HSE Consultant in the Oil and Gas Industry
B.E, (Mechanical Engineering),April 1994, University of Madras. Diploma in Computer Applications. 14 Years in Oil / Gas fields - SR.PRODUCTION OPERATOR
10 years of experience in oil and gas industry. Experience in mud logging and working on service rigs. Extensive experience in planning and executing well completions, drill stem tests(Open hole and cased hole), rig and rigless intervention; Artificial lift; budgeting, tendering and evaluation
Senior PDS and/or PDMS Structural Designer. Experience in all aspects of design; from conception of design (FEED), layout work to detail design in the Oil and Gas (onshore/ offshore), Refinery/Petrochemical plus Power Generation industries for EPC&M companies in Europe, Asia and Australia
Senior Cased Hole Wireline Engineer
Currently working with M.S. Al-Suwaidi Industrial Services Co. Ltd. as Project/Mechanical Engineer for the construction of HDPE Plant owned by Yanbu National Petrochemical Company, Yanbu Al-Bahr, Kingdom of Saudi Arabia
Chemcial Engineer With +12 Years experince
Have more than fifteen (15) years of professional associations with ENAR Petrotech Services (Private) Limited (EPSL) and gained experience in the Project Management and Detailed Engineering Design.
Deepwater Completion engineer
Production Technology, Completion Engineering, Well Testing, Nodal Analysis, Flow Modelling & Production Optimization
20 years Materials Controller / Coordinator
Sr. mechanical/construction engineer
Over fourteen years of experience in Detail / Design, Supervision and Drafting of plant layouts, piping systems for onshore oil and gas facilities, refineries, pipelines, power & sugar plants and industry utilities.
QC / WELDING INSPECTOR (STRUCTURAL)
Well Testing Engineer, DAS Engineer, Working as Well Testing Engineer with ¡§China National Logging Corporation¡¨.
With the use of Aspen HYSYS and Pipesys, I develop a steady-state pipeline model for gas/oil gathering systems (Onshore), identifying fluid characteristics and flow rates for production cases
First   Prev   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   78   79   80   81   82   [ 83 ]   84   85   86   87   88   89   90   91   92   93   94   95   96   97   98   99   100   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com