Resume - Bachlor degree(b-tech) in chemical technology, having the experience of oil refi...

Misco Jobs

Resume #74205

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
* Bachelor of Technology (B-TECH) in Chemical Technology with 1st division.
* Diploma of Associate Engineer in Chemical Technology with 1st division.
* Matriculation in Science with 1st division.
-----------

OBJECTIVE:
------------
1.To establish a career in a well-reputed organization that will make good use of my abilities.
2.To work in challenging environment and be a part of challenging projects.
3.To work with Oil Refineries, Oil & Gas Exploration, Gas treatment, Oil storage tank area, transportation of Oil through pipe lines.

WORK EXPERIENCE:
------------
Total experience: 11 Years.
Having the Experience of Pre-commissioning, commissioning, startup, shutdown of Fertilizer, Refinery and all kinds of oil storage tanks like EXTERNAL FLOATING ROOF, INTERNAL FLOATING ROOF, CONICAL ROOF, DOME ROOF, DOUBLE DOME ROOF, SPHERICAL TYPE, TANKS WITH FLOATING LOWERING LINE, and TANKS WITH NITROGEN BLANKETING, MAINTANCE OF TANKS and also Working experience as a Field operator, Gantry Supervisor, PLC, SCADA, DCS Panel Operator in Oil Movement and fertilizer plant at DAP/UREA complex.

CONTROL SYSTEM WORKING EXPERIENCE
I have been working with following system:
* DCS-FOXBORO/INVENSIS to operate the tank farm activity in TAKREER.
* DCS-UCOS (USER CONFIGURABLE OPEN SYSTEM) of ADNOC Takreer.
* DCS (YOKOGAWA CENTUM CS OF JAPAN) to operate oil movement and blending activities in Pak-Arab Oil Refinery.
* SCADA (Supervisory Control and Data Acquisition).
* PLC (PROGRAMMABLE LOGIC CONTROL).
* ESD (EMERGENCY SHUT DOWN) system of triconex.
* TGS (TANK GAUGING SYSTEM) of Sakura Japan.
* TLAS (TRUCK LOADING AUTOMATION SYSTEM) of Fisher Rosemont.
* FAS (financial Accounting System) make by Fisher Rosemont for oil accounting.
* Fuel Manager made by YOKOGAWA.
* OMIS (Oil Movement Information System).
* MAXIMO 4i (Computerized Management System).

1: July.2007 to date ABU-DHABI OIL REFINING CO.TAKREER.

Currently employed with ABU-DHABI OIL REFINING CO. (TAKREER) having the refining capacity as 85,000 BPSD and working as a Control Room Operator in Oil Movement section having 68 storage tanks facilities for all products. And also participating in Pre-commissioning, commissioning, Loop testing, Logic testing philosophy test with the project team of "M/S DODSAL and NAMA MOTT MACDONALD" Engineering in new expansion tank farm project for storage the Gasoline RON-95, 91, Gas oil and JP-1.

2:Nov.1998 to July 2007 PAK-ARAB REFINERY CO (PARCO).

Worked with PAK-ARAB OIL REFINERY CO (PARCO) state of the art of technology 1, 00,000BPSD Mid Country Refinery as a Sr.Control Room Operator in Oil Movement (Tank Farm) area having the storage tanks facilities as 52 Equipped with DCS Centum CS YOKOGAWA.

JOB DESCRIPTION IN OIL MOVEMENT (TANK FORM) AREA.

I have taken part in Pre-commissioning, commissioning and start up activities of the area with the project team of Marubeni Corporation of Japan and Japan Gasolene Corporation in Parco and with DODSAL and NAMA MOTT MACDONALD Engineering in Takreer.

* Crude oil receiving through pipeline (864 km long from Karachi to site Mehmood kot) crude oil storage and feeding to crude distillation unit.
* LPG handling receiving and feeding to fuel gas system.
* LPG truck loading, transferring handling through pipeline.
* Intermediate storage (Light Naphtha, Heavy Naphtha, VGO, Reformat and Stab.Naptha)
* Supervision of "petroleum products blending" such as MOGAS, HOBC, HSD, LDO, jet A-1, and Fuel Oil as a "Blending Operator"
* Participation as a representative of PARCO with different companies dealing in Aviation Fuels such as DESC, PSO, SPL, and PIA & AIR TOTAL in order to check the quality of aviation fuels.
* Supervision of Gantry operation in truck loading area as a "Gantry Supervisor"
* Developing standards operating procedure "SOPs" in order to make the oil movement & Gantry operations safer and easier.
* Preparation of petroleum products inventory as well as the production and dispatch of the petroleum products either through pipeline operation or through gantry operation.
* Preparation of feasibility reports for modification of jobs of oil movement department.
* Finished products transfer for truck loading and also performed other activities like tanks switchover operation, inter-tank transfer and re-injection system.
* Sampling and gauging of finish and intermediate products.

3: FAUJI-JORDON FERILIZER DAP/UREA COMPLEX KARACHI

Total Duration: August 1997 to November 1998.
Working experience as an Apprentice Process Plant Operator at DAP (Di-Ammonium Phosphate) plant Designed by "Grand Proze Process of France" capacity 1350MT/D.
I have taken part in Pre-Commissioning & Commissioning startup and shutdown activities and performed duty at the following section:
* HGGS (Hot Gas Generation Section).
* DPRS (Double Pipe Reactors Section).
* GS (Granulation Section).
* RDS (Rotary Dryer Section).
* PDBE (Positive Discharge Bucket Elevator & Belt Conveyer Section).
* H2 So4 and H3 Po4 Handling.

KNOWLEDGE OF THE PROCESS EQUIPMENT.
I have the good knowledge of the following equipment
* Centrifugal pumps and Compressors.
* Positive displacement pumps and Compressors.
* Heat Exchanger.Distilation.
* Furnaces.
* Turbine.
* Absorber, Stripper, Column, Reactor.
* Steam Traps, Valves.

EDUCATION & CERTIFICATION:
------------
* Bachelor of Technology (B-TECH) in Chemical Technology with 1st division.
* Diploma of Associate Engineer in Chemical Technology with 1st division.
* Matriculation in Science with 1st division.
Technical Training:
* Two years Refinery Processing Training from "PETROMAN PAKISTAN".
.Basic Fire Fighting.
* Emergency Response Team.
* First Aid Team.
* Gas Testing & Use of Multi Gas Meter.
* Permits to work System.
* Reporting IRS (Incident Reporting Sheet).
* Use of SCABA (Self Containing Air Breathing Apparatus).
* Use of Proper PPEs (Personal Protection Equipments).

ADDITIONAL INFORMATION:
------------
* Date of Birth Nov19, 1976
* Marital Status Married
* Nationality Pakistani

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2151 to 2200 of 9783)

Go to Search Parameters...

Brief Description

Sr. Drilling & Completion Consultant

Instrument Designer/6 years of experience in Instrumentation Engineering & Construction Design

Installation, Wiring, Loop checking, Calibration commissioning of new electrical instrument and project

+12y of experience in the oil industry, especially onshore& offshore oil drilling service which has worked in the Senior Electrical engineer in more than two company to the position of Assistant Director of maintenance

Petrophysicist (Senior Geoscientist) with almost 7 years experience, Skills: Log Analysis and interpretation (Cased Hole/Open Hole) Integrated core and log data analysis, petrophysical moddeling, reserves evaluation, base knowledge of seismic interpretaion

marine, Industrial Journeyman Electrician

I have over 10 years experience out of which has solid 7 years of experience both as a Project Leader and a Team Leader and is has excellent understanding of project life cycle, quality systems, data migration, risk management, software testing, data modeling and developing specification

I M WORKING AS OPERATOR SINCE IN PETROCHEMICAL FIELD SINCE 15 YRS.

Firoz Khan, A NACE CP Level 2 , have had a great deal of corrosion / Cathodic Protection experience in Pipelines, Above/Under ground storage tanks, Jetty & Offshore Structure. Have done a lot of CP Surveys also.

Production/Development Geology, Exploration geology, Sedimentology, Sequence Stratigraphy, Geomodeling, Seimic interpretation, Reservoir Characterisation, Petrel.

I have M.Sc. in Mechanical Engineering and as a Piping Engineer I have 7 years experience both in design and construction phases of oil, gas and petrochemical projects led by International firms like TECHNIP and LINDE.

My career ambition is to be working for a firm that allows me to work with Electrical Power Generation, High Voltage/Low Voltage Power Supply Systems, Sub-stations, Distribution, Transmission Lines, Protection and Metering Scheme Design, Installation, Testing, Modification and Maintenance. Qualific

I have dedicated 14 years in the corrosion protection, corrosion monitoring, material selection and material upgradation in Oil and gas based industries. For the last two years I have been associated with the Inspection Management System and Risk Based Inspection programme being developed.

Expert in alignment, maintenence, troublrshooting, overhouling with nice computer knowledge

Fourteen years of experience in Estimation & Proposal preparation of Co - Generation Boilers, Refineries & Oil, Gas and Petrochemical Plants. Well versed in all aspects of Estimation and commercial terms & conditions of contract.

Excellent working knowledge in Piping stress analysis using caesar II

Instrument Engineer with MBA having 10 years Expeience in Refinery & Chemical Industries Project & Maintenance.

Stractural/ Mechanical Engineering

I am a Chemical engineering graduate with Diploma In Industrial Safety and having 15 yrs. experience in Refinery, Petrochemicals, Oil and Gas plants with SHELL- PDO OMAN LLC,Reliance Petroleum Ltd , Enron in Off Shore Power division for LNG regassification unit, Cairns Energy India pty ltd for Laxmi

worked in oilfield since 1975 on the rig as Roustabout to Senior Toolpusher and OIM, in the office as Drilling Superintendent and Operations manager

I am a Diploma holder in Electrical Engineering. I worked 8 years in Indian Engineering Companies as Engineer. Later i started my career in Oil and Gas Industry. I am capable of serving the position as Electrical Maintenance Supervisor / Foreman. Now i am working in Sudan.

Purchase and logistic Management with +14 Years Experience

Dy. Manager- Operation, Panel Operation,Pre-commissioning & commissioning Exp.

Self-motivated and experienced Supply Chain professional. Possesses over 28 years of knowledge in materials, logistics and shipping Has well proven team leading and organisational skills which have been proven in a dynamic and challenging supply chain environment

Having Over 10 years of experience in Documentation in Oil & Gas Industry using EDMS

A keen analyst with 11 years of experience in QMS Implementation, Testing & Inspection, Inspection Co-ordination, Welding Operations, Audits etc.

NDE Project Manager, III Ultrasonics ASNT/ACCP/EN473, Phased Array, TOFD, API 510 (lapsed), CWI (lapsed)

Results-oriented Petroleum Engineer with 17 years experience in the International Oil Industry with an in-depth technical appreciation of production practices.

Canadian Citizenship, twenty-year work experience in the oil/gas and mining industry with very strong skills in geology and geophysics, reservoir management, Development and Production and production engineering. Very proficient in computer software applications for resources estimation, project eva

Piping &pressure vessel design

Core business is scaffolding; Consulting, controlling, supports, execution business. in Oil & Gas industry and construction industry

I am M.Tech and got 13 years of experience in the field of process automation & controls

Mechanical Field Service Technician

Graduate with 6 months Fire Fighting Training from Japan, four years experience as Fire Chief of Lahore Metropolitan Fire Brigade, Eight years experience as Fire Prevention Officer [District Civil Defence Officer]

Coil Tubing Supervisor. An extensive Knowledge of onshore, Desert, swamp and offshore Well service techniques have been gained on a variety of completions, including Oil & Gas producers, water & gas injectors and Deep-Sea wells which are outlined as follows.

Extensive experience processing marine and land seismic data. Familiar with data worldwide including Geometry QC, Refraction Statics Solution, Tidal Statics, Velocity Analysis, Multiple Attenuation, DMO, Coherence Filters and Migration.

Master Mariner

Petroleum engineer speciality drilling, 44 years old, 14 years middle east experience at SHELL standards, tollpusher, rig manger, drilling superintendent experience, drilling, completion, workover, fishing experience

I am interested to fulfill one of the geologist position in your company, here in I apply for that slot. I have been working on the several oil companies for more than 15 year experiences to look at some hydrocarbon basin studies throughout Indonesia

I am currently seeking a new assignment as my present project with Shell Houston on the construction /Integration/commissioning of topsides for the FPSO BONGA has recently come to an end in Nigeria. I was the QA Lead supporting and auditing on/offshore construction activities and based in Lagos.

Diverse experience as a petroleum, mechanical and environmental engineer. Areas of specialized knowledge extend from personal management, completion, operations and production engineering to project engineering and project management.

Instrument Electrical. Real polyvalent-Electronics: Fire detection/gas detection/communication system and hydraulic systems(crane, wellhead control)

14 year-experience(6 years in Arabic World) in Oil&Gas and Petrochemical Industries as C&I Engineer(Technician).Involved in design, construction, commissioning, startup, shutdown and maintenance of some plants.I worked with great companies – ANSALDO, BROWN & ROOT, SHELL, LUKOIL.

Leading team of process engineers for oil and gas process engineering work (Conceptual, FEED, Basic and Detail, etc)

5 Years of Digital DCS Control systems erection ,testing and commissioning experience.

NACE certified corrosion technologist with over 25 years experience in all aspects of the Corrosion Protection field. Extensive field experience. Willing to travel. Interested in contract work.

M.Sc Petroleum Engineering, 28 years experience as Drilling Fluids/Mud Engineer and Reservoir Engineer

Bachlor degree(b-tech) in chemical technology, having the experience of oil refinery,oil movenent(tank farm),multi product pipe line operation and fertilizer urea plant.

Presently I am working Bunduq oil company at offshore Abudhabi as a techanicianmechaical

Geoscientist with over Six (06) years of professional geological & geophysical experience. Team player with excellent technical, demonstration, project management and interpersonal skills, and dedication to industry working environment.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 [ 44 ] 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out