Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #7430 next resume »»
CONTACT INFORMATION:
View contact information...

RESUME

Date of Birth: 15.06.1972
Nationality: Indian
Marital Status: Married

Languages Known: English, Tamil, Malayalam and Hindi
Professional Qualification: B.E. (Electrical & Electronics), 1St Class, ( 1994 ), Annamalai University, Chidhambaram, Tamilnadu, India
In-plant Training: Thermal Power Station-II (7x210MW), Neyveli Lignite Corporation Limited, Neyveli.
Computer knowledge: MS-Office, Prema Vera, MS Project, Basic, Forton, Cobal & C.
Work Experience:
10 Years in Electrical, Instrumentation & Cathodic Protection. Specially in Erection, testing, calibration of instruments, loop checking, sequence checking, pre-commissioning, Commissioning, Design verification, QA/QC, Project management, Billing and handing over of various projects like EHV Sub-Stations, Transmission Lines, Oil & Gas Industries, Power & Desalination Plant, Cathodic Protection of Oil / Gas well casings with flow lines & sea water pumping station as site engineer, Project Engineer & Project Management Consultant.
UAE Driving Licence No, Type & Validity: 394853/T, Light Vehicle, From 01/08/2004 to 31/07/2014

DETAILED WORK EXPERIENCE

September 2003 to till date: VECO Engineering, Abu Dhabi, UAE.

Position: Project Management Consultant ( Electrical & Instrumentation ) - PMC Team Member in a seven member team
Project Value: 57 Million USD
Job Responsibilities:
Permit to Work ( PTW ): Completed PTW course arranged by ADCO. Working as job originator for issuing/closing permit to work (PTW).

Design verification as per contract specification, Quality procedure/Inspection test plan evaluation / preparation comments & implementing, Verification for cable trench route/anode ground bed location, Inspection as per ITP, issuing & closing CAR, Quality control & Quality assurance in accordance with ISO: 9001 Quality system, schedule Implementation, Progress monitoring, Internal Electrical/Instrumentation Auditing ( Preparation of punch list & punch out after completion ) & Preparation of progress/technical reports/correspondences with contractor and client for Erection, Testing, pre-Commissioning, Commissioning, including handing over for Cathodic Protection of 1311 Oil & Gas wells with connected flow lines using Solar Panels & battery bank, Transformer rectifiers at ASAB, SHAH, SHAGIL, HABSHAN & BU-HASA Oil fields of Abu Dhabi Oil company for onshore operations ( ADCO ) in Abu Dhabi.

June 2003 to August 2003: Galfar Engineering & Contacting Co.L.L.C, Oman.
Position: Electrical & Instrumentation Engineer

Job Responsibilities:

Erection as per P&I/hook up drawings, Testing, pre-Commissioning, Quality control & Quality assurance in accordance with ISO: 9001 Quality system including Project Planning, Scheduling, Implementation, Inspection, Internal Instrumentation Auditing ( Preparation of punch list & punch out after completion ) & Preparation of progress/technical reports for 29 Bore well network with 3 ground reservoir, 2 pumping station, 12 elevated tanks Ash" Sharqiyah Sands Main Water Supply Project for drinking water distribution system at Al-kamil area in sultanate of Oman using PLC/SCADA system interconnected by 140 km FOC Cable.
Independently supervised the cable laying, straight through / end splicing, checking of FOC cables using OTDR & power meter & installation, termination, checking of float/ultrasonic/conductive level transmitters, flow transmitters, pressure transmitters, motor operated valves, PLC panels, SCADA panels & networking for SCADA.

Courses completed:
* CEP ( Competent Electrical Person ) Course
* HSE Induction
* H2S Awareness and Escape
* Permit to Work System (Signatories Course)
* Job Hazard Analysis
* Basic Fire Extinguisher
* Enhanced Site Supervision ( ESSW)
* Supervisory Safety
* Incident Investigation and Reporting
* STOP … for Safety
* H2S, O2, Hydro Carbon Gas Testing
* Refresher course on Quality Control / Quality Assurance in accordance with ISO: 9001.
March 2002 to May 2003: Hitachi Zosen Corporation, Oman.
Job Value: 175 Million USD
Position: Electrical & Instrumentation Engineer

Job Responsibilities:
Erection as per P&I/hook up drawings, final onsite calibration of instruments, loop check for instruments, sequence testing, Testing/Commissioning, Quality Control & Quality Assurance in accordance with ISO: 9001 Quality system including Project Planning, Scheduling, Implementation, Inspection, Internal Electrical & Instrumentation Auditing ( Preparation of punch list & punch out after completion ), Preparation of progress/technical reports for AES 20 MGD Desalination plant in sultanate of Oman with electro chlorination plant, Seawater Screening/Pumping Station, Acid cleaning, Chemical Dosing ( Inhibitor), 3 no Evaporators & Remineralization plant with the following equipments With 90,000 Metres of electrical cables & 60,000 Metres of instrumentation cable laying /termination work.
* 9X1000 kva, 11kv/415v Transformers for Auxiliary power supply.
* 3X1500kva, 11kv/288v Transformers For Chlorination plant rectifier (Toshiba)
* 6 No's 11kv panels (ABB)
* 7 No's LV Distribution panels (Togami-Japan)
* 2 Set's of Battery charger/Battery bank/ups (Guttor)
* 16 no's 11kv motors (Ansaldo)
* 8 no of Cathodic Protection Panels with anodes & reference cell.
* 45 No's of small control panels (Togami)
* HVAC for 4no's SWGR Buildings (Blue star)
* Fire fighting & Fire alarm installation for the whole plant.
* 1 No Local Control Panels with PLC (Siemens) & AC Drives (ABB) for sea water bar/band screening system with pumps for drainage/feed water pumps to chlorination plant.
* 3 no Local control panel with siemens PLC for evaporator tube cleaning system.
* Five No DCS Panels (ABB) for sea water pumping station, 3 no evaporators & remineralization plant.
* Pressure, flow, temperature, level, & position transmitters, MOV, Analyzers.
* Airline & Impulse line work.
November-2000 to January- 2002: BALMER LAWRIE & Co. Ltd. (A GOVERNMENT OF INDIA ENTERPRISE)
Corporate Planning & Project Division, Kolkatta, India.

Position: Site Engineer ( Electrical & Instrumentation ) for Total responsibility Consultancy Service

Job Responsibilities:

Design verification as per contract specification, Quality control & Quality assurance in accordance with ISO: 9001 Quality system, Project Planning, Scheduling, Implementation, Inspection, Internal Electrical/instrumentation Auditing ( Preparation of punch list & punch out after completion ), Preparation of progress/technical reports, erection as per P&I/hook up drawings, final onsite calibration of instruments, loop checking, sequence testing, pre-commissioning, testing / commissioning and assistance to get the CEA, Pollution control board clearance & State electricity supply As Total Responsibility Basis Consultant for the following Indian Oil Corporation EPC Projects.
( Independently completed the electrical & Instrumentation works in the following projects )
* IOCL LPG Bottling plant project at Mannargudi, Tamilnadu, India.

* IOCL POL Depot project at Gulbarga, Karnataka, India.

* IOCL AFS station project at Trivendrum, Kerala, India.

December 1998 to October 2000

:

Bombay Suburban Electric Supply Ltd (Contracts Division), Chennai, India. ( BSES )

Position Site In charge (NLC Sites)

Responsibilities:

Independent Complete Supervision for Erection, Testing & Commissioning of EPC contract 110 KV double circuit over head transmission tower line work with single poles and double pole structures ( Re-routing of 33 KV head lines at Mines – I ) including shut down & re-routing, Quality control & Quality assurance, project Planning, Scheduling, Implementing, Progress Monitoring, progress reporting, billing/following payments from client, checking sub-contractor invoice & handing over to client at MINES – I, Neyveli Lignite Corporation Limited, Neyveli, Tamil Nadu, India. (A GOVERNMENT OF INDIA ENTERPRISE)
Total Co-ordination like tender submission, Technical / Commercial bid evaluation, planning and scheduling, manpower/material arrangements to execute the project, overall erection supervision, Testing & Commissioning and handing over the project as per the EPC contract terms and conditions at Neyveli Lignite Corporation Limited, Neyveli, Tamil Nadu, India. ( A GOVERNMENT OF INDIA ENTERPRISE )

* 230 KV one bay expansion in thermal power station – II switchyard.

* Supply & Erection of 2 no of 750 KVA diesel generators at thermal power station I expansion site.

* Supply & Erection of 11 KV outdoor kiosks and 11KV XLPE cable laying in thermal power station I expansion site.

June 1994 to November 1998: TECHSER Engineers. ( ESA Contractors & consultants, Chennai, India )

Position: Project Engineer

Job Responsibilities:

Independent Complete Supervision for Erection, testing & commissioning of following projects including Quality control & Quality assurance, project Planning, Scheduling, Implementing, Progress Monitoring, progress reporting, tendering for further projects, billing, following payments & handing over for the following Projects at Neyveli Lignite Corporation Limited, Neyveli, Tamil Nadu, India. ( A GOVERNMENT OF INDIA ENTERPRISE )

* 230/11kv, 6x30MVA Sub-Station in Mines-I

* 33/11 kv, 4x20MVA Sub-Station in Mines –I

* 33kv O.H Line (10km) in Mines-I

View contact information...
«« previous resume next resume »»
Search Results (Resumes 8801 to 8850 of 10847)Go to Search Parameters...
Brief Description
I am working with Engro Chemical Pakistan Ltd., since start of 1999, as a Chemical Plant Operator at Urea Unit, and wish to join else where in the world.
branch=EEE fresher location=anywhere
Seeking possible internship/future employment
Recently graduated Petroleum Engineer from the University of MO-Rolla, seeking full time employment in the United States.
I have my IWCF DRILLER CERTIFICATE valid up to 2003. I am very much interested in joining the challenging offshore/onshore industry as an entry-level person.
I have completed Bachelor of Sciences in Mining Engineering. I want to start my career in Oil and Gas field. I am enclosing my CV. Subjects which I have studied in four years program are mentioned in CV. If you have any challenging job or post of trainee or apprentice, please do call.
Petroleum Geologist who has graduated in 1993 from Gadjah Mada University, Indonesia. Still reading several books about drilling, subsurface pressure and seismic stratigraphy until now. I learned Landmark's softwares like Seisworks and Stratsworks.
More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.
Mechanical Engineer, Project Engineer and Project Management Services
Safety, Environment, Industrial Hygiene, Loss Prevention, Security Program Management
I’m a good communicator who is able to work in a team and can handle pressure. . I am also willing to relocate, work over-time, after hours or/and be on stand-by if and when necessary.
Am instrumentation Engineer with 1 yr Exp in UAE.I am interested in service engineering or Operation side job
Inspection of piping.pipelines,offshore structures,welders qualification,pqr,internal audits,quality plans review,test packs review.
Project Management, Senior Mechanical Engineer, Mechanical & Piping Supervisor, Design Engineer
10 Years in Electrical, Instrumentation & Cathodic Protection. Specially in Erection, testing, calibration of instruments, loop checking, sequence checking, pre-commissioning, Commissioning, Design verification, QA/QC, Project management, Billing and handing over of various projects like EHV Sub-St
Exploration Geologist
An experienced engineering manager, project manager, and program manager with Department and Division operations experience at engineering and construction, and consulting firms. Experience in multi-disciplinary infrastructure projects and environmental remediation.
Planning Engineer, BS Industrial Technology, SAP PM Module Expert, Primavera P3/3e Hands on Experience.
HSE Specialist
Proficient with Leica RTK GPS, Total Stations & survey specific computer programs; Microsurvey, Autodesk Land Desktop, Leica Geo Office & Excel. Experienced pipe line & fibre optic locator.
Safety Officer/Adviser. Cert IV OHS level, Cert IV Training & Assesment. Qld WHSO accredited. 5 years experience - resource, retail industries. Hands on proactive professional to facilitate Safety /Environmental/Risk Management plans/systems to Australian Standards.
Free! Worked as a roughneck for Nabors Drilling USA and had the opporunity to go Directional for Baker Hughes INTEQ where I had been employed as a DD IV until just recently. Was laid off due to lack of work and would really like to get back to work ASAP. I am very responsible and hard working.
Lead Mechanical Piping Engineer Gas and Power Plant site office testpack hydrotest pipe support punch list
Six years of experience in execution of maritime jobs like Construction of Rubble mound breakwater (for Naval Base & LNG Project ) Jetty ( Ethylene Terminal & LNG project) and Berths ( for LNG loading )
Production Manager, Process Engineer, Project Engineer, Metallurgist
Ten years experience in design, construction, water, wastewater treatment plants, buildings, roads, Certified in Occupational Health and Safety Canada, AutoCAD, B.E. Civil, and ME Environmental (Public Health) Engineering, Valid Ontario class G drivers license, Water Treatment Plant, Water Distri
-Installation the Network’s and maintenance,Interface Between systems, Corrective and Preventive Actions of Hardware and Software, Adviser in applications Maquila Systems, Customer service Maquila’s Systems. wireless communications, two way Radios,
i'm 26years old, i hold a B.ENG Degree in Petroleum Engineering from university Portharcourt, with 2 years in petroleum production operation with shell petroleum. Beside my experience i need a company who can employ me IN ANY kind of petroleum engineering JOB.
Dynamic leader and team builder, consistently motivating others toward success.
Seeking an analyst position. Highly innovative graduated offering more than 2 years in business and credit analyst experience and a proven ability to go beyond expectations. Willing to travel and relocate
Five years increasing responsibility and leadership in Power Plant, Analytical Chemistry, Mechanical Operations and Maintenance. Expert in the fields of Water Sampling , Maintenance Planning, and Record Audits
I would like to introduce my self as young ,enthusiastic Mechanical Engineer working currently with M/s Hasan Juma Backet Trdg. & Contg. LLC Oman for last two years in Water & Waste Water field. I can assure you if given a chance i can come up to the expectations of my seniors.
Marine Engineer with an experience of around 5 years at sea, looking for an opening in the oil fields.
please see below
More than 4 years experience in Oil & Gas Refinery in Construction to Start-up Worked in 3 different projects with International Companies. Installation of equipment, Precommisioning & Commisioning system
Would Like To Work In O&G Organization Where In I Can Leverage My Knowledge And Thereby Add Value To The Company. Would like to work on Onshore rigs.
ROV Pilot Training, BOSIET, HUET. Offshore Medicals, STCW 95
diploma im mechanical engineering,able to handle all kinds of equipment s
Graduate in Civil Engineering and Post Graduate in Information technology. Having over 10 years of experience in Marine Civil Construction projects internationally.
Machinist,C.N.C. / Manual 20+yrs. experience
Chemical Engineer, Project and Quality-Security-Environmental Management
34 years in instrumentation industry.
Goal-driven & result-oriented Oil and Gas Engineer with a strong mechanical, pipeline, facilities & project engineering background and over five years experience in the E&P industry.
Hardworking, Dedicated, trustworthy and have the ability to work with others. Acquired Bsc in Mechanical Engineering. Reliable, Honest, responsible, work well independently and on a team. Prepared to do extra work and can work during emergencies. Single with an excellent health. I enjoy interact
11 years experience in the field of surveying and believe that my background and experience would make me a valuable asset to any organization that is looking for a hard working, trustworthy, and professional field surveyor
Heavy equipment operator,heavy mechanic,pre-employment floorhand(roughneck) training
AutoCad,Ms-Office
Qualified Geologist (Hons Applied Science) 10 years exploration experience in Soft and Hard rock Geology,( Gold and base metals) (Victoria Western Australia and Queensland experence. Also hold a Masters in Commerce Uni of NSW. Looking for a position in China as wife is from Beijing.
I am a skilled secretary, help director with the routine works, responsible for providing secretarial and administrative support to all divisions, Project , Proposal and Procurement , Finance, Sales and HSE, manage company filling system, prepare and compiling bid administrative documents
Education: Diploma in Electronics Instrumentation & Control Engg. (63%) Skills: System & DCS Engineering, configuration of Simple and Complex loops and Generation of Graphics, Logics development. Attending FAT (Factory Acceptance Test)
First   Prev   151   152   153   154   155   156   157   158   159   160   161   162   163   164   165   166   167   168   169   170   171   172   173   174   175   176   [ 177 ]   178   179   180   181   182   183   184   185   186   187   188   189   190   191   192   193   194   195   196   197   198   199   200   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com