Resume - 32 years of international and domestic deep water, jack-up barge and land rigs,i...

Misco Jobs

Resume #744

CONTACT INFORMATION:
View contact information...

Pioneer Natural Resources: November 1996-January2002
Operations Supervisor
Employee of PNR with experience in air drilling, underbalance wells, directional and horizontal wells offshore and land. Deep water projects in water depths up to 7000'.

Self-Employee: August 1989-November 1996

Drilling and Completion Consultant
Worked for Mobil Oil Co. in the GOM WITHS WELLS UP TO 26000'depth and H2S wells Mobile Bay. Worked for Force Energy in GOM in drilling and side tracking abandon wells. Worked for Swift Energy on land in drilling. Overseas for Hamad Al Hamad & Partners in Kuwait, managed two land rigs in drilling and completion, and meet weekly with KOC to discuss necessary well programs.

Magnum Marine Corp: December 1982-August 1989
Toolpusher/Drilling Superintendent/Drilling Manager
Employee working in Egypt and China as toolpusher, promoted to drilling superintendent and responsible for three offshore jack-up rigs, promoted to drilling manager and managed all phases of operations for drilling and completion for two slant-hole rigs offshore and managed office staff and meet daily with the Preuvian Operators to discuss necessary well programs.

Self-Employee: June 1981-December 1982
Drilling and Completion Consultant
Worked for McCormick Oil Co. on land and inland barge, was responsible for writing procedures and locating rigs and contacting vendors. Worked offshore for Murphy Oil Co. in drilling on jack-up rigs.

Cities Service Oil Co: June 1978- June 1981
Drillinf Foreman
Employee working offshore GOM in drilling and completion, on jack-up, platform rigs and drilling storage wells on land.

Odeco: January 1969-June 1978
Driller
This is were my experience began, started out as a roustabout and worked my way to driller in three years, working offshore on jack-up rigs.

Schools Attented:
Preston Mooore Drilling Practices
Microbar Drilling Fluids
Clean Gulf Associates
Baker Marine Jacking
Well Control- Surface-Subsea (expires March 25,2003)

Education:
High School

U.S.Passport: No:201278612
Issued Sept.13,1999 Expiration: Sept12.2009

References will be provided on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4501 to 4550 of 9906)

Go to Search Parameters...

Brief Description

21 Yr Exp Power Electronics - Electrical Engineer, Large Variable Speed Drives & Motors, Automation

22 years experience of which 12 years with in the oil sector where I had to Implement systems, overseeing accounting and carrying internal auditing missions, Significant experience in start up process, J.V. management, Fluent in English, French and Arabic.

Road & Air transport, HSE Coordinator, Driving Assessor, Crisis Management, Emergency Response, Audits, Inspections, Reporting, database Administrator

Seasoned Drilling Sup't - Onshore - with 15 years experience as a Drilling Sup't. 20 years of international experience. 18 years in the Middle East. A logical and systematic problem solver. A cooperative and friendly colleague. English is my mother tongue, but also moderately fluent in French.

Electronic Engineer

Entry level Process Engineer,BS and MS Chemical Engineer

I work and live currently in Canada, Work as a Well Testing Supervisor, Willing to relocate and work anywhere in the world, I am single, Willing to negotiate a wage or salary. Experience in high pressure low temp sour service high stage equipment. Thank you for your interest in my resume,

Master Degree Pipeline Engineering

Seeking a position with a company that has growth potential both individually and team wise with a vision for the future, as well as, the ability to utilize Managerial/Supervisory skills to help maximize Company Growth/Productivity.

A full time opportunity as an Aerospace Engineer to utilize my extensive skills in Management, Design, Manufacturing, CAD/CAE/CAM tools and Computer Programming.

BSc.(Engineering) and PGD (Engineering) in Petroleum Engineering - 2 Year experience and hand in Reservoir Simulations

11 years covered in Oil and Gas Plants Instructed as an Instrument technician with theoretical knowledge and practicing on equipments for measurement and control systems from electrical to pneumatic or hydraulic circuits. Worked for big companies: AGIP & SONATRACH (from commissioning to start up)

FEA ANALYSIS, HYDRAULICS DESIGN, MECHANISM DESIGN, MEDICAL DEVICE DESIGN

I have valid IWCF Well Control, Sea Survival Certificate, Fire Fighting, and H2S. I am self-motivated and willing to work hard, pro active, have a good interpersonal communication skill, good leader ship and I can work individually or in team

HSE Engineer-a good educated, skilled and experienced individual on construction, fire protection and safety operations aspects, attained from exposure in different industry, hard working individually and in team, friendly and outgoing, self-motivated and well- organized

Foreman on Oil Jobs

I have been employed by Drilling & Workover organization in Saudi Aramco as a contractor of a service company from July, 1997. As a Materials Coordinator/Expeditor and Project Coordinator include my responsibilities assisting material Advisors at Material Acquisition and Forecasting Unit; coordinat

Pre-commissioning Engineer

Graduate engineer with specialization in metallurgical engineering and professional experience as welding engineer in the fabrication field for the past 10+ years. CEng MIOMMM MWeldI, ASQ-CQE, API 510 pressure vessel inpsector, CSWIP Senior Inspector

03 years Diploma of Associate Engineer in Electronics Technology. + 02 Years Apprenticeship in Electrical Technology from POFs IT Wah Cantt. + High School Certificate (Science Group)1st Division - Total 08 years Professional Experience

Proficiency in Process simulation on HYSYS. Proficiency in Gas pipeline simulation with TGnet, TLnet. Proficiency in application software such as MS-Office, MS-Access. Basic Exposure of HTFS.

i have B. ENG in Chemical Engineering with Second Class, Proficient in the use of Microsoft applications: word, Excel, and Core draw, MySQL, Oracle, and others. CAREER OBJECTIVE:To work assiduously towards the accomplishment of a challenging and reputable organization thereby attaining a higher lev

Am M.H.Abdul Mujeeb, Bachelor of engineering holder working as a Mechanical(Field) Engineer in Anabeeb Arabian Pipeline and Services Co Ltd,Al-Jubail,KSA.My responsibilities are to handle Heatexchangers,Vessels,Coloumns and also Reformer.And also to prepare doucumentation for the projects.

application for the post of safety engineer/ safety officer having an experience of 6 years and 7 months of which 2years and 7 months in kuwait approved as a safety officer from koc kuwait and approved as a safety supervisor from knpc kuwait

I am post graduated from I.I.T roorkee and have 3 yr experience in oil and gas consultancy(offshore) after post graduation. I have sound knowledge of SACS, STAAD softwares

Lead Quality Engineer / Inspection Engineer / Welding Engineer

In–depth knowledge of theoretical principles of logistics, practical skills in materials management, supply chain management, control over transportation, storing & distribution of goods. Knowledge of basics and principles of operational planning. Experience in tutoring & supervision of small group

I am a Chemistry graduate having fifteen years experience from petorchemical and ammonia plants. At present I am working as a shift chemist in Saudi International Petrochemical Company. Previously I was worked in Madras Fertilizers Ltd as Senior Lab Analyst. Kindly consider my resume.

Overall In-Charge for all Catering Operations at the Installation, Cost & Waste Control, Menu Planning, General Housekeeping for in and out of Accommodation and living Quarters, Providing Laundry Services, Practice of Safe & Environment Garbage Disposal, Mobilizations of crew and job rotation, etc.

Logistics 10+ years experience including: Commercial (Mining) project logistics; Humanitarian aid ; and, Military. Transportation & Distribution management; Warehousing; Purchasing. Fluent in both English and French; and computer literate.

Experienced in analytical techniques in hydrology/hydrogeology. Expert in modeling of ground/surface water using a variety of software. Skilled at managing moderate teams through planning, execution and report writing. Excellent written and verbal communication skills.

Engineer PhD + 8 years experience in fluid flow and flow assurance including research and development with paraffin deposition problems. Extensive experience with modeling and analysis of multiphase flow problems.

I have over ten years in the production field and consider myself a specialist. People skills, technical skills, office skills, and supervisory skills all of which have come about through seasoned experience. What I offer your company is QUALITY!!

Sr. instrumentation engineer with 11yrs of exp in the commissioning, startup and maintenance of petrochemicals and refinery.

I am a 39 year old South African Male seeking employment in the Petrolium/Oil/Gas Field. I am a qualified Fitter & Turner with relevant experience.

8 years of experience in Project planning & Control Management, including Construction engineering, Engineering & Procurement management, Costing & budgeting, Project financial analysis, Subcontracting, billing and progress analysis. Primavera Package for Project Scheduling.

To obtain a position in the offshore oil & gas drilling industry which best utilizes my extensive mechanical skills and background while providing for career advancement. Currently residing in Fort Collins, CO, and in process of relocating to the Houston, TX, metropolitan area.

9 yrs experience in process engineering for Refinery, Natural Gas, Petrochemicals areas, worked on FED,DD projects; de-bottlenecking studies & residual engineering work. techniques of hazard analysis & HAZOP studies. used process simulation software ChemCAD 3.0, HYSIS,PipeSim & Pipephase

Working on campus at Texas A&M University–Kingsville has provided me with a variety of skills and talents. I also have an extensive knowledge of a variety of computer applications. I am always interested and open to further training & I am willing to relocate.

QC Geophysicist for 2D Seismic Reflection data acquisition. Geophysicist for data acquisition processing & interpretation of Seismic Refraction. Resistivity data acquisition processing and interpretation for water investigation Familiar with computer packages

Registered Occupational Emergency Nurse . 30 Years experience in Industrial Mining and Oil Industry Nursing. At present working as an Oil Rig Medic Nurse In Angola. Also Trained as Diagnostic Radiographer and Gold medal, Instructor in First Aid, Resuscitation and Medevac.

I AM EXPERIENCED ELEVEN YEARS IN OIL AND GAS, SR.PRODUCTION OPERATOR ONSHORE AS WELL AS OFFSHORE IN MULTI NATIONAL COMPANIES. I AM LOOKING FOR A BETTER APPORTUNITY,PRIOR FOR ME JOBS POSTING 28/28.

Extensive experience in the sales and marketing of crude oil and finished products. Worked for 4 years for an energy trading company in the USA, Votex Investments, Inc. Educational background includes a MSc in International Business from the London School of Economics.

Included in body & contact information.

hydraulic technician/fitter

32 years of international and domestic deep water, jack-up barge and land rigs,in drilling, completion and workover in field operations.

23 years of experience as a supervisor in drilling, completion and workovers on and offshore.

COMPUTER GEOLOGIST Databases, GIS & 3D Modelling Project & Quality Management

I am a female Geologist. I obtained my Msc from Oxford Brookes University, and am computer literate.

Petroleum Engineer with MBA in Finance (University of Houston). Willing to be relocated to Colombia (South America). Native Spanish Speaker.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 [ 91 ] 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out