Resume - Field service engineer for gas turbines and generators. Controls and electrical ...

Misco Jobs

Resume #74498

CONTACT INFORMATION:
View contact information...

EDUCATION
Aristotle University of Thessaloniki (Greece)
Electrical and Computer (Electronic) Engineer, March 2002

PROFESSIONAL TRAINING
-PROJECT MANAGEMENT, Manage your project successfully. PMBOK3 analysis: Step review of projects while identifying essential points affecting your project.
-SIX SIGMA (6ó), Training on the quality standards while using Six Sigma as a tool to improve business.
-MANAGING SAFELY, Certified training program by the Institution of Occupational Safety Health (UK), March 2004.
-Southgate Com. & INTRACOM. Two weeks training over Networks, Voice over IP, Backbone Networks and Cisco Routers, May 2000.

PROFESSIONAL EXPERIENCE
General Electric International Inc.: Jan 2006 to Present
Field Services - Controls Engineer
Field Services – Electrical Engineer
-SPEEDTRONIC Mark V,Ve,VI,VIe Controls Engineer for GE Gas Turbines and Generators.
Excitation and starting systems for generator and motors, EX2100-LS2100
-Post sales customer support. Providing support to customer and minimizing unavailability time of their plants.
-Multi plant support across Greece and Cyprus. Emergency and planned work schedule and supervise.
-Maintaining high customer relation and ensure their satisfaction for the efficiency of acquired equipment.
-Technical advice during commissioning new gas turbines and generator installations.
-Organizing and supporting onsite maintenance activities.
-Perform major system upgrades/retrofits (DLN2.6, MKVe).
-Assist and lead new engineers across the field. Support and advise them on regular issues/problems faced.

VATECH Hydro GmbH&Co: Jan 2005 to Jan 2006
Commissioning Permit to Work Administrator
-Thessaloniki CCPP 390MW. Followed up commissioning works in cooperation with commissioning managers. Secured the correct execution and implementation of the permit to work system.

Management Force: January 2004 to Jan 2006
Safety Practitioner and Consultant
Site HSE coordinator VATECH Thessaloniki CCPP 390MW.
-Managed and coordinated all HSE issues on plant with no fatalities and below target incident rate. Organized security system and established security check procedures.
-Planned, organized, and executed site tasks for secondary subcontractors ahead of schedule while achieving better results than expected.
-Supervised a team of workers for secondary works. Organized and prepared schedule for weekly programs.
-Improved organizational skills.
-Supervised the construction of Mediterranean Cosmos Shopping Center, Thessaloniki. Established safety awareness to subcontractors and improved security system. Implemented procedures for material and personnel control and relocated site facilities.
-Prepared risk assessments for the public buildings of Serres Municipality within the Project Risk Assessment Team. Redesigned and recommended electrical network improvements in order to comply with safety regulations.

Military service in communication troops: Feb 2003 – Nov 2003
Military officer in telecommunication systems
-Responsible for ERMHS telecommunication systems. Assisted camp commander in preparing maintenance procedures.
-Operated and maintained computer network for internal communications.
-Prepared training programs for new officers.
-Trained and supervised soldiers' team.

Karidakis S. Constructions: Apr 2002 – Dec 2002
Site engineer
-Supervised total construction works of private buildings.
-Planned work sequence while executing ahead of schedule.

Southgate Communications Hellas Co.: Sept 1999 – Mar 2002
Network maintenance engineer
-Supported Thessaloniki and Larissa base station installations.
-Conducted network maintenance while maintaining strong customer relations.
-Supported customers with technical troubleshooting and solution implementation.

Hellenic Petroleum Refineries: Summer 1999&1998.
Electrical Engineer
-/Polyvinyl Chloride plant.
-Regulated and repaired electronic devices and electrical engines.
-Implemented user's manual composition for the regulation, conservation and operation of content analyzer.
-/Ammonia plant.
-Electronic instruments and machinery regulation and preservation.
-Implemented user's manual composition for the regulation and placement of electro-pneumatic switches.

Telecommunication Company of Greece (OTE): Oct 1998 – June 1999
Electrical Engineer- Deputy Manager
-Prepared for the regeneration of OTE's buildings. Built elaborate database for the inventory of company holdings.
-Participated in the reorganization of the constructions department building. Focused on electrical and communication network update and redesign.

OTHER SKILLS
Proficiency Degree in English from Michigan University
Programming Languages: C, C++
Skillful with PC's, Windows OS, and programs such as Matlab, Photoshop, and Flash.

PROFESSIONAL AFFILIATIONS
Member of the Institute of Electrical and Electronics Engineers (IEEE)
Member of Greek Technical Chamber (T.E.E.)
Member of Association of Mechanical and Electrical Engineers of Northern Greece

ACTIVITIES AND INTERESTS
Willingness to travel abroad and experience new cultures.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2401 to 2450 of 9797)

Go to Search Parameters...

Brief Description

Seismic Analysis: AVO, spectral decomposition, Seismic Inversion, attribute analysis, Shallow Hazards Analysis, Geopressure.

Self motivated and experienced sales & marketing manager that always gets results

Over 30 year’s professional inspection experience in the petroleum refining, chemical process and electrical power generation industries. Extensive experience performing American Petroleum Institute 510 inspections on pressure vessels and American Welding Society Certified Welding Inspec

Quality Specialist experienced in Quality Management System, being aware of specific Inspection Techniques, including NDT Techniques and offering over 25 years experience in QA/QC environment acquired in Mettallurgy and Construction (Prestressed Concrete Cylinder Pipes and Oil&Gas Inst.)

30+ years petro=chemical/construction QA/QC experience

Integrity & RBI Inspection Engineer

I've been 18 years experience in Petrochemical and Oil&Gas and my position now is Operation Foreman for Petrodar Operating Company in Republic of Sudan in Oil & Gas company. My responsibilities are to manage the operation of crude oil production which is daily capacity 200,000bbl/day.

I am a B.Tech degree holder in Instrumentation passed out from Madras Institute Of Technology, Madras, India and I am having Sixteen years of experience in the field of Instrumentation in maintenance, construction, commissioning and design in petrochemical, refinery, power plants

IT specialist, professionally qualified in Management and Computers(M.B.A Information Systems, Masters degree in Computers, Bachelors degree in computers) with 9 years of proven hands-on technical and management experience.

Over 15 years of successful consultative sales experience in both the software application, enterprise level solution and service markets. Sales, sales management and business development positions held with a wide range of technology related and innovative solution based organizations.

MS in Civil and Mechanical Engineering, in Alaska, Russian and English language, experienced in Numerical Wave Modeling, Coastal Engineering, Hydrographic Survey, adaptable to changing projects and work schedules and have a proven ability to quickly train on different subjects.

•Engineering, Project Management, Construction Management, Cost Control & Sub-Contract Co-ordination •Oil & Gas, Petro-chem, Cross country Piping •Shutdowns/ Tie-ins •Equipment Installation/ maintenance and commissioning •Structural Fabn & Erecn •Manpower and Resources Planning

I have been working in the UAE since October 2001 as Mechanical Maintenance Supervisor/Commissioning Engineer in the Oil/Gas and Power Industry. Prior to that I held senior positions in the Military as Ship's Chief Engineer, Engine Room I/C, Instructor and In charge of training.

Myanmar/ Singapore PR, MSc in Manufacturing and BEngg in Electrical Power, Total 7 year experience in electrical power, able to do LV design, maintenance, service and commissioning for marine and offshore industry

Maintenance, verification and run in hole of Quarz electronic memory down hole gauges for data acquisition involving static pressure survey, Flowing gradient survey, flowing pressure survey, maximum efficiency rate survey, injectivity / fall off survey, interference test, build up test.

I am qualified mechanical/piping engineer, with extensive experience in pipe stress analysis, hands on experience both in design and field operation.

Oil and gas production operations Specialist with over fourteen years of onshore and offshore diversified and solid experience in many facets of production and oil storage and movements operations. My most recent experience was in the middle east

Project Management/ Project Superintendent- Electrical & Instrumentation abilities- Construction/ Mechanical Completion of Offshore Production Facilities. Commissioning assistance during construction phase. managing personnel up to 200 E & I field craft.

Electrical operation and maintenance

Experienced, geotechnical engineer / exploration geophysicist

HR Generalist possessing 5.5 years of exp in handling Recruitment,Performance Appraisal,Training & Development,Compensation and Benefits,Statutories for various industries like IT,Engineering & Manufacturing,Oil and Gas,Pipe Engineering Project.

I have passed through the whole production system, as production tehnologist and production supervisor

Level Five Ticketed Jouneyman Well Test Supervisor

Field service engineer for gas turbines and generators. Controls and electrical studies background. Working experience on several fields (construction, refinery, maitenance and operation)

Document controller with a total experience of more than 6 years. More than 3 years of experience in documentation using SAP EDMS in a Petrochemical company in Saudi Arabia.

Competent Project Controls specialist with Estimating, Claims Management and Risk Management skills. Experience spans 35 years in industries including Nuclear, Fossil and Hydroelectrioc power, Oil and Gas, Refinery and LNG plants. Multi-discipline estimating skills at all levels from FEL onwards.

Instrumentation & Control Systems Engineer: Honeywell TPS and ABB Infi-90 Open DCS(Distributed Control Systems), Triconex and ICS Triplex TMR PLC(Programmable Logic Controller) and Process Control Instrumentation.

Project handling and management as piping engineer

HSE / SAFETY SPECIALIST

Structural engineering, Specialised design engineer in oil & gas, industrial, commercial & residential structures, Holds a Postgraduate Degree in Civil Engineering with Specialisation on Structural Engineering

My skills are Electrical, Hydraulics and Pneumatics.

i am a geologist with 9 years experince, i have an experice with some geological softwares like Gravitas, powerlog, winlog, CPS3, stratlog and OFM, i did a supervision for mulogging, wireline and LWD jobs,

Reservoir Engineering/Simulation, Software development, Problem Resolution, Customer Service

CSWIP 3.1 Welding Inspector & International Welding Engineer

Worked for a leading group of manufacturing companies in kuwait as store incharge, imports purchase officer, iso 9001 internal auditor for differenct periods of time. Presently working as Quality Inspector in Inward section for ADGAS LNG manufacturing company in offshore Abu Dhabi

Procurement of All Electrical & Instrumentation Items

22 years of overall experience in Oil & Gas Industry in Operations, Project Management, Subsea Works, Facility Engineering, etc.

Geologist/Hydrogeologist, 18 years experience, environmental, sedimentary and glacial bedrock and soil deposits, 3-dimensional characterization of fracture zones in bedrock, LNAPL and DNAPL migration pathway analysis.

good experience in mechanical oil and gas equipement

9 and half Years of working experience in Petrochemical Refinery and Oil & Gas Production / Processing Plant's Instrumentation field (Reliance petroleum Ltd. India, Petroleum Development Oman (Shell-Oman govt joint organization), and Ras Gas-Qatar) as Maintenance Foreman/Technician-Analyzers.

Chemical Engineer with 10 years experience working with Reliance Industries Ltd

Skills -operator rotary, derikk,mecanic pump hidraulic fluid,electrical -electronic

A highly qualified and skilled Reservoir Engineer with over 7+ years of Domestic and International experience for the long-term management, development and optimization of large, mature fields and associated satellites.Expertise in Production/Petroleum and Reservoir Engineering particularly (expe

Extensive Work Experience

34 Years of Inland and Offshore Inspection and Project Co-Odination

Fourteen years experience in E&P oil industry. Good knowledge in drilling and production engineering. Extensive experience in well engineering operations in Completion, clean-up, DST, Stimulation, Coil-tubing, Logging, Well survey etc. Good skill in planning, organizing, communicating, interpersonal

An experienced Offshore Procurement Lead

14+ years of experiance in Engineering,Design Engineering specialising in Instrumentation field.

Process Instrument & Control and Analytical Insrument Specialist

I have over 20 years experience in all aspects of electrical work i.e. construction, testing and inspection and commissioning at home and abroad, both onshore and offshore.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 [ 49 ] 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out