Resume - I am a chemical engineer having 17 years of work experience in India and Bahrain...

Misco Jobs

Resume #74938

CONTACT INFORMATION:
View contact information...

Work place: Oil Refinery

: 1991 to 2005 Dec at BPCL (Bharat Petroleum
Corporation Limited, Mumbai, India)

: 2006 January Onwards at BAPCO (Bahrain
Petroleum Company, BAHRAIN).

Achievement: DEVELOPMENT OF SOUR NAPHTHA TREATMENT PROCESS AND DESIGN OF THE PLANT.(PATENT APPROVED BY GOVERNMENT OF INDIA)

Work skills and experience:

1991-1997(6 years) BHARAT PETROLEUM CORPORATION LIMITED, MUMBAI, INDIA

Position: shift supervisor & Senior Shift supervisor of Fluidized Catalytic Cracking & Gas concentration Complex Operations.

FCCU Complex comprises of Reaction Section, Gas Compression, Gas concentration, Gasoline Treatment, LPG treatment, Refinery Gas Treatment with Amine, Amine regeneration unit, sour water stripping unit & sulphur recovery units.

Responsibilities:

1. Smooth and safe DCS operation of all the units.
2. Guidance to the DCS operators during plant emergencies/up sets/start ups/shut downs.
3. Trouble shooting the problems.
4. Ensuring the quality of Amine solvent and caustic.
5. Adherence to safety, health and environment standards.
6. Identification of the training needs of the shift crew.
7. On job training of the shift crew.
8. Handling of the emergencies and carrying out the safe start up/shut downs.
9. Participation in MOC and Hazop Meetings.
10. Procedures preparation.
10. Adherence to safe turnaround management.
11. Meeting the production targets of LPG and other products.
12. Control of overtime and ensuring the adherence of operators to the company policies.
13. Good knowledge of DCS operations during startup/shut down and emergencies (HONEY WELL.YOKOGAWA).

1998-2002(4 years) BHARAT PETROLEUM CORPORATION LIMITED, MUMBAI, INDIA

Position: Deputy Manager Commissioning/ and PROCESS of Diesel Hydro treating complex

Diesel Hydro treating complex: It consists of Hydrogen Plant, Diesel treater, Sour gas treatment, amine regeneration unit, Sour water treatment and Sulphur recovery units. Sulphur handling facilities (SANDVIK ROTOFORMER PELLETISER)

Sulphur recovery unit is MCRC Process (maximum CLAUS RECOVERY CONCEPT)

Responsibilities:
1. Incident free commissioning.
2. PFD Checking
3. P&ID Review & Check.
4. Equipment inspection and commissioning procedures review.
5. Selection of operators.
6. Training of operators.
7. Stabilization of the complex.
8. Performance test run of the two stage hydro cracker and sulphur,amine treatment plants.
9. Performance monitoring of the unit.
10. Data collection and coordination with the licensor.
11. Trouble shooting of the problems.
12. Performance guarantee test run with the licensor.
8. Plant monitoring and troubleshooting.
9. MOC Preparation.
10. Participation in Hazop.

2003-2005(2 years) BHARAT PETROLEUM CORPORATION LIMITED, MUMBAI, INDIA

Position: Manager commissioning and process technology of Hydro cracker and LBOP complex and process technology

Hydro cracker Complex consists of hydrogen, two stage hydro cracker,LBOP, gas recovery, gas treatment, LPG treatment, amine regeneration, two sour water strippers and two Sulphur Recovery units.

Responsibilities:
Responsibilities:
1. Incident free commissioning.
2. Equipment inspection and commissioning procedures review along with process licensor CHEVRON.
3. PFD Checking.
4. P&ID Checking
5. Catalyst loading.
6. Presulphiding supervision.
7. Normal operation of the complex.
8. Performance monitoring and trouble shooting.
9. operator recruitment and training.

2006 onwards

Position: OPERATIONS ENGINEER LSDP Complex at BAHRAIN PETROLEUM COMPANY.

LSDP Complex consists of Bahrain Gas (KHUFF) treatment, hydrogen plant, two stage hydro cracker plant, sour gas treatment, Amine Regeneration, sour water treatment and Sulphur Recovery Units with TGTU (tail gas treatment).

Responsibilities:

1. Precommissioning/commissioning of the Hydro cracker unit.
2. Procedures preparing for startup/emergencies/shut downs.
3. Guidance to the DCS control operators during plant upsets emergencies/start ups and shut downs.
4. Meeting the product specifications.
5. Operator training.
6. Adherence to SHE standards

Training:

PRODUCTION MANAGEMENT COURSE AT OSAKA, JAPAN
HYDROCRACKER TRAINING BY CHEVRON

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 851 to 900 of 10816)

Go to Search Parameters...

Brief Description

Having 15 years of experience as as Design Draughtsman / Autocad Engineer in Oil & Gas, Petrochemical & Manufacturing industries.

QA/QC Manager Welding Engineer Offshore and Onshore

Drilling Excelence Manager for BP Trinidad & Tobago. 10 Years experience in BP as DE/SDE/Org. Capability Manager & Drilling Excellence Manager. 9 Years in Service Company with experience as De/project Manager/Proposal Manager & QHSE Manager.

Project/Engineering Manager, 24 yrs Experience in Oil & Gas (Indian Oil Corporation Ltd.) for Development of Terminals & Gas Stations. Projects involve conceptualizing, engineering, budgeting, estimation, tendering, procurement, fabrication, installation, testing, pre-commissioning and commissioning

Piping stress analysis, finite element analysis using ANSYS, Mechanical design, etc.

Experienced Country Manager, skilled in change and open to multicultural environment.

Design skills in steel and concrete of petro chem and power plants.

Production Engineer resume

I working for Schlumberger Achievement as Crew Chief Wireline Operator. I perform jobs in location. Working in a Team is one of my compliances, most jobs in Cased Hole and Open Hole, and report to Field Engineer

Coatings & Corrosion Engineer "NACE"

I am 44years old and right now I am still working at PT Pec-Tech Indonesia (RGMI Group), current position as “Senior Process Engineer”. Business line of this company is Engineering/EPC As you can see from my enclosed curriculum vitae; I have long and wide experiences (± 19 years) in Operation Pro

Licensed professional engineer with over twenty-seven years of structural design and deliverables production experience for Industrial, Commercial, Residential, Oil and Gas, and Transportation projects

Upstream and mid-stream experience(27 years) plus underground waste water injection

earned master of science at the University of Oklahoma in the subject of rock mechanics. He has been a professor of production, drilling, completion and stimulation for more than 14 years, and he had earned more than 12 years of field experience.

Ph. D. level Materials Scientist looking for a position in research and development of new materials and novel processes for fuel cell, or hydrogen related industry to apply my broad materials working knowledge, materials characterization expertise, equipment design, and patents development skills.

I am experienced in reservoir simulation and numerical modelling, foamy heavy oil flow, well testing analysis, production forecast, horizontal and multilateral wells, thermal recovery, water flooding, PVT sampling and analysis.

I have a PhD in Logistics Management and over 20 years work experience in shipping, logistics, supply chain management, airfreight, sea freight, container marketing & operations, port development & expansion, ship and air chartering, project cargo handling, freight forwarding, etc.

Skilled, knowledgeable, and experienced in organizational assessment, strategic planning, business process reengineering, organization design, and change management in oil and gas related operations including production SBU's, upstream and downstream R&D, MIS, and Finance

I have outstanding experience in the design of high-pressure gas transmission line and its associated facilities in valve stations and also a fuel gas supply line plus governor station to 1800 MW combined cycle power plant in South Korea.

A Procurement/Logistics/Admin Manager of 25 years experience in the O & G industry particularly with FPSO's. Has contracted in Thailand/Singapore/Malaysia/Nigeria/Libya/UAE/Qatar/Scandinavia/Europe.

 Over 21 years of experience in the Petroleum exploration Industry.  Have broad experience in the area of drilling and completion fluid design and formulation in on shore as well as off shore wells.

Senior reservoir engineer: 30+ yrs experience in N. America, S. America, and Europe. Denver-based. Available for contract work, long-term or short-term. Fluent in English and Spanish.

Drilling Specialist for 35 years. Postings have included Worldwide Drilling Manager, In-Country Drilling manager, Drilling Engineer, On-Site Drilling Supervisor and Drilling Consultant. Skilled in foreign start-up operations and training of Nationals.

A versatile and Innovative Chartered Accountant of Nine Years post Qualification experience and Eighteen years on the Job Practical Experience

Over 22 years’ professional experience in Conceptual, FEED, Detailed engineering and project management in Oil & Gas, Refinery, Petrochemical and Chemical projects.

Over 12 years (over 4 Years in Gulf Countries) in pre-commissioning and commissioning, start up, daily plant operation and shutdown activities for large oil and gas, refinery and petrochemical plants.

Project Engineer with Australian education, canadian experience and with very good project management skills.

Pipeline, Facilities and Project Engineer.

12 years experience in Warehousing and Logistics operations from in-bound to out-bound w/ purchasing function

More than 18 years of design experience in oil and gas production, gas processing, LNG Production, and projects of refinery, petrochemical and chemical industries. Specific experience in front end and detail engineering, process engineering/flow schemes development, process data sheet preparations

Good working experience on Instrument and control system

Senior Mechanical Piping / Stress / Equipment Engineer BS in Mechancial Engineering USA National

8yrs of working experience in the field of HVAC & Duct Manufacturing. M.S. from KFUPM. B.E. (Mechanical). Areas of Interest Heating, Ventilation and Air-Conditioning. Indoor Air Quality. Facilities Management (Inventory, Space, Maintenance,

QA/QC Enginner

PMO, Planning, Project manager, Program Director

Reliability, Maintenance, Planning and Material Engineer- Mechanical

More than 15+ years experience in process operation

Telecom field technicians Customer end

Procurement, Contracting, Logistics and Inventory management

Principal Engineer with 20 years Umbilical, Flowline and Riser Experience Design, development and installation of flexible Flowlines, risers, umbilical and oil offloading lines and associated ancillaries. Including dynamic, structural and on bottom analysis.

Electrical Maintenance in Petrochemical Industry

Extensive and diversified experience in the field of Onshore & Offshore Oil &Gas, Petrochemical, Refinery, Chemical Plants for FEED, BASIC Design & Detail Engineering for various types of Static Equipments viz. Pressure Vessels, Columns (CS & CLAD), Towers, Reactors, Heat exchangers, steel structure

I´m Chief OFFicer wiyh tanker experience and Other Ships like Tug Boat, whit 7 years at sea, 10 yeras in oil and marine industry, Ship Yards, Port Operations, Manager in Logistics Deparment, Sipply Chain, Desk and Administrative work.

Mechanical senior technician,• Carry out maintenance work independently in the repair, overhaul, troubleshooting, alignment of rotating equipment like (pumps, compressors, fans …), spares requirement…

Dear Sir. I would like to forward my resume with this letter to yourself in the hope to find an entry level position in your respected company like a electro engineer... My main skills are hard working; take good care of my job & keen to progress.

I am a chemical engineer having 17 years of work experience in India and Bahrain at various management levels in process engineering and operations, troubleshooting of of Fluidized catalytic cracking, gas compression, concentration units, and hydro processing units, gas treatment & sulphur recovery

QA/QC Instrumentation Engineer / Inspector - 17 years experience in Oil & Gas (16+ years in Middle East with Saudi Aramco, PDO, KNPC, ADNOC & RAS LAFFAN), Certified Lead Auditor, GCC & International Driving License, Well versant with Codes & Standards

Managemen and Multidiscipline Engineerign Coordination of Oil & Gas Industry |FEED and Detail Engineering Projects.

unigraphics designer drafter

I am a Senior DCS/Instrument engineer with 19 years of experience in Project engineering, Construction, Commissioning and Maintenance support of Oil/Gas & Petro chemical industries.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [ 18 ] 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out