Resume - A chemical process engineer with 12 years experience in oil refining and petroch...

Misco Jobs

Resume #7647

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS:

* Extensive experience working as a process engineer for 12 years
* Demonstrated ability to adapt and implement technological changes
* Proven knowledge with Total Quality Management (ISO9002), Energy Conservation, Environmental Management (ISO14001) and PHA Techniques (HAZOP)
* Proven problem solving abilities, including root case analysis of operational problems
* Excellent knowledge of industry standards, specifications and regulations (API, ASME, BS, TEMA, OSHA)
* Proficient in PRO2, Power Point, Hextran, Pipe Phase, Hysis, CAD, Word, Excel
* Excellent team player in a multidisciplinary environment

OBJECTIVE: To apply for a challenging position in process engineering field

EXPERIENCE:
Responsible for various duty in process engineering including design, commissioning, monitoring, optimizing, troubleshooting, revamping, executing performance/capacity test runs, managing / executing projects and preparing process flow diagrams (PFD) / process & instrument diagrams (P&ID) under environmental regulation and industry standards

* Process Engineer 03 2004 –Present
Petro-Ex Canada Co, Richmond Hill, Ontario
* Prepared proposal for fuel conversion to save $1000,000 per year in an oil refinery
* Prepared proposal for energy conservation to reduce 10 % energy consumption
* Estimated the cost of the fuel conversion project
* Designed fuel gas pipeline and network and developed P&ID
* Redesigned Crude feed pump and perheat exchangers with simulation software
* Redesigned Fired heaters to reduce flame impingement, tube skin temperature and excess air
* Revised mass and energy balance for an oil refinery
* Lectured the furnace operation for process engineers including furnace and burner specification, revamp, optimization and energy conservation

* Tutor of Applied Mathematics 02 2003 –03 2004
The Pathways to Education Program, Taie International Institute, Toronto, Ontario

* Process Engineer 08 2002 – 01 2003 Canadian Petroleum Processing & Equipment Co, Mississauga, Ontario
* Designed metering/regulating natural gas station
* Designed filter separator bank
* Designed piping, safety valves and control valves
* Senior Process Engineer 01 1999 -06 2002
National Iranian Oil Co. Esfahan Oil Refining Co., Iran
* Determined need for, designed and managed a project to convert the refinery from fuel oil to natural gas consumption
* Revised and revamped fuel gas network in an oil refinery to increase fuel gas consumption from 20000 Nm3/hr to 200000 Nm3/hr with PRO2 and Pipe Phase software
* Achieved 88% reduction in fuel oil consumption and SOx emission with heater and boiler optimizing and fuel converting and saved $120,000,000 per year
* Defined and executed environmental protection projects and ISO-14001 programs and achieved 30% reduction in waste and flaring and saved $ 50,000,000 per year
* Programmed the oil refinery fuel consumption / waste calculation with Excel software
* Revamped fired heaters to increase capacity by changing burners and purchasing high duty, low excess air, low NOx and COx, low noise, and low flame height burners

* Senior Process Engineer 03 1995 -01 1999
National Iranian Oil Co. Bandar Imam Petrochemical Co., Iran
* Commissioned and de-bottlenecked Synthetic Rubber plant
* Calculated new recipe for synthetic rubber
* Designed C4 raffinate (a by product) purification system to achieve 80% reduction in impurity and saved $ 1,200,000 per year
* Produced extended oil for synthetic rubber production and saved $600,000 per year
* Designed latex tanks, vacuum evaporation vessel and wastewater systems
* Selected flux oil as effective, safe and environmentally friendly polymer solvent

* Process Engineer 03 1991 -03 1995
National Iranian Oil Co. Esfahan Oil Refining Co., Iran
* Simulated and revamped Atmospheric / Vacuum Distillation Towers with PR2 software
* Performed modification on de-cocking system and inert gas production system
* Increased Lube Oil plant capacity from 10,000 to 14,000 barrels per day with executing several test runs and revamping
* Optimized Crude Oil and Lube Oil plants and calculated material and heat balance

EDUCATION
* Bachelor of Science Degree in Chemical Engineering 1990
Tehran University
(Note: Degree is recognised in Canada by World Education Services)

* International Certificate in Environmental Protection 2000
Institute of Urban Construction and Environmental Protection, sponsored by the United Nations
TRAINING COURSES 1991-2004
* Control Valves
* Pumps and Turbines
* Fired Heaters
* Quality Auditor Course for ISO-9002
* Management Training Course
* Supervision Skills
* HAZOP and What If in OHSAS 18001
* Environmental Protection System ISO-14001
* Dynamic Process Simulation (Pro 2) Software
* Cooperation Management and Proposals System
* Energy Management-Fuel and Wastes
* Safety System and Occupational Health
* Hextran and Pinch Technology Network
* Processes Interrelation of Refining Units

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5151 to 5200 of 10816)

Go to Search Parameters...

Brief Description

Bachelor in Chemical Engineering (Co-op option) (University of Ottawa, Canada) Hard worker, enthousiastic.

Major Course Work: Process Heat Transfer, Chemical Engineering Plant Design I, II, and III, Kinetics and Reactor Design, Process Dynamics and Control, Mass Transfer, Unit Operations, and Chemical Economics and Design

Exp.Mechanical & construction manager in Oil & gas , more that 26 years of work with big oil companies.High educated with MSc in Mechanical and offshore engineering from Robert gordon Uni /Uk.

7.5+ years of Control System Enineering experience with Global Control System leaders(INVENSYS-TRICONEX IPS/FGS,YOKOGAWA Prosafe ,CS3000,HIMA-IPS,EMERSON-DELTA V Systems)

As a Instrument supervisor to lead the work crew and holding the responsibility to complete the job with standard ¡§HSE¡¨ practices as per the strict ¡¥Shell¡¦ safety norms of Petroleum Development of Oman. And also involved in Installation, calibration, loop checking, Pre commissioning, etc..

Cementing Engineer

holding 3 yrs diploma in hotel management and catering technology with more than 8 yrs exp. in catering field

Working in QA/QC

Currently working in the North Sea as a Slickline Supervisor on an Ad-Hoc basis.

PDS &piping drafter

B.Tech Chem engg + MBA (marketing) with 10+ years in Project Management in O&G / Petrochemical Projects

QUALIFICATIONS : M.Sc. (Geology), Skill : Geologist, Mudlogger, Geotechnical Engineer

Good knowledge of Environmental Impact Assessment (EIA), HAZOP, Risk Assessment, Safety Audit, Environmental Audit, & Various Safety Techniques Like; International Safety Rating System (ISRS)-By DNV, Process Safety Management (PSM) etc.

Graduated Mechanical Engineer,Certified Caterpillar Engineer, Experience as a Field Engineer in the Gas & oil, Marine,Mining Industry

13 years of Experience in DCS System, PLC & ESD system as well as field instrumentation.

Ph.D. in materials science and engineering, four year experience in teaching, five year experience in working in various industries. Fields of specialty; corrosion, coating, materials selection

Geophysicist. Current area - Exploration Seismology. Strong experience in Geophysical Data Processing, Theory of Polarization Anomalies, Numerical Modeling.

* Over 11 years of experience in areas of Process Automation Engineering & Instrumentation.* Hands-on experience in Automation Engineering, estimation, design, installation & maintenance of equipments in India & Abroad.Expertise in advanced PLC, systems & providing technical support on Instruments.

adaptability, flexibility, coputer knowledge

DEsign Engg., PLC, SCADA, I&C work Experience

Skills include Petroleum Engineering,reservoir Engineering,Petroelum Geoscience,Geochemist,Mud Logging

I have recently completed M. Sc. in Petroleum Technology, from University of Karachi.

Pipe rack design, routing of pipes on rack, Preparation of Tank farm Layout in detail and piping layout for the same from the process point of view. Preparation of detailed piping layout, Equipment layout, General Arrangement drawings, Isometric checking.Isometric drawing preparation

I have been working construction in the Petroleum/Oil/Gas field for the past three years. I have done turnarounds and capital work.

Cogeneration, gas engines

• Results-driven, logical and methodical approach to achieving tasks and objectives

Wide experiences in Occupational Health, Safety and Environment, advisor to the employer on the measures taken in the interest of the safety and Health of persons employed in the place of work. Inspect the place of work to determine whether any machinery, plant equipment substance.

2.6 year of experience in Detailed Engineering work of the refinery units helped me understand the profile and the responsibilities of a mechanical engineer (Static) and to realize how important this field is to the oil refining business and I have learned how important it is to be flexible.

Highly personable Drilling Fluids Engineer with over three years of experience in laboratory work, project supervision, logistic services both air and land logistics and mud engineering.• Proficient with Microsoft Office System (including Microsoft Word, Microsoft Excel, Microsoft PowerPoint®, Micro

Project Planning & Control Engineer / Scheduler / Earned Value System Designing and Development/Primavera Group Software Developer/I have been working in Engineering and Construction phases of EPC oil, gas and petrochemical projects/PMP (Project Management Professional)/Project Planning & Control

I am a certified lead auditor in ISO ¡V 9001, OHSAS 18001, ISO 14001 standards.

Monitor daily well progress; provide verbal and written technical input as required to well operations/production department, Prepare well supplemental programs and specifications.

opweration, commissioning,refinery, LNG unloading, termonal operation, plant operator, refinery operator,

Title research and Ownership Reports, Deed Plotting and Runsheet Preparation

Long experienced man, good language skills, oil field experiences and certified as a radio officer, ready to work in the worldwide.

SAP HR Implementation, Recruitment, Training, Compensation Management, employee Relation, Performance management

A chemical process engineer with 12 years experience in oil refining and petrochemical industries

Has served as Supervisor (Mechanical) during shutdown in KNPC, Kuwait and FERTIL, Abu Dhabi. Has experience in the maintenance of Rotary Machinery like pumps, compressors, turbines, etc. and stationery equipments like heat exchangers, columns, vessels and piping. Has computer knowledge.

Skilled in all planning shutdown, shutdown supervision, servicing, modifications design and total project cost control, mainly in power stations and refineries

Pipeline, Pipe Stress, Piping or MEchanical Engineer

Process Design & Review , Review P & ID’s , Computer Programs (Excel, Word, PowerPoint), Training The Junior Process Engineers & Process Technicians

A professional electrical engineer; more than eight years of active experience in electricity sector of Pakistan in controls, protection, SCADA. BSc Elect. Engg.; MSc Controls; MBA. Has also worked in Northern Electric plc, UK. Technically competent; has ability for business and financial analysis.

OBJECTIVE A challenging position in managerial level QUALIFICATION FOR THE JOB Good education and fully experienced with engineering and management duties,, have initiative and willing to accept engineering responsibilities.

: PROJECT ENGINEER //SENIOR ENGINEER /ELECTRICAL -- ENGG./(DESIGNS)/PROC./CONSTRUCTION/SUPN./O & M OIL/GAS/PETROCHEMICAL INDUSTRIES ETC.

12 yrs exp in Chemical Industry . strong academic background B.E. Chem +ICWA+LLB+MM (AIM, Philippines) seeking for a suitable opening

cnc turn mill machinist setter

JR. PDS DESIGNER PIPING WORKING FOR WELLCOMPANY IN MUMBAI ON PDS FOR PIPING. GOOD EXPERIANCE OF PIPING.REFER DETAIL BIODATA.

This is the Drafts man C.V for Zueitina Oil Company, Libia.

Please see attached cv regarding your procurement requirements

PROCESS ENGINEERING OF OIL AND GAS PROJECTS

First Prev 101 102 103 [ 104 ] 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out