Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #76639 next resume »»
CONTACT INFORMATION:
View contact information...

OBJECTIVE
Chemical Process Engineer

HIGHLIGHTS OF QUALIFICATIONS

- Master of Science Degree in Chemical Engineering
- petroleum refining technology (Crude Oil Distillation, C5/C6 Isomerization, Alkylation, Naphtha Hydrotreating, Jet and Diesel Hydrotreating, Catalytic Naphtha Reforming, Fluid Catalytic Cracking, Hydrocracking, Steam Cracking)
- refinery production planning using linear programming model
- refinery process modeling and optimization
- knowledgeable in software such as: PIMS, Petro-SIM, PetroFine, RefSys, Hysys, CrudeManager, Spyro, OSI ProcessBook, OSI DataLink, Microsoft Office
- language skills: English, Polish, Hindi, Russian
- problem solving skills
- communication skills

SELECTED ACHIEVEMENTS

- Determined using PIMS model economic potentials of selected crude oils for PKN Plock refinery by calculating net operating margins which could be generated by processing them. The rest of the team working on this project supplied me with the assays of crude oils taken into consideration and converted results of simulations into the report and presentation for the management board. All this resulted in PKN Plock refinery starting to process two new brands of crude oil and in the improvement in its net operating margin. (Crude Oil Slate Diversification Project).

- Identified and rectified inaccuracies in several process models supplied to PKN by various external vendors. That enabled me and the other engineers to generate simulation results closer to reality and my superiors to make correct decisions based on sound premises.

- Conducted profitability studies of proposed improvements in a number of process units using refinery PIMS model. As a result most of the proposed improvements were found capable of generating a profit and implemented. (Optima Project)

- Generated crude distillation units cases, fluid catalytic cracking unit cases and hydrocracking unit cases to be made into PIMS submodel tables of the respective process units Upgraded PIMS model enabled the Planning Department to develop more accurate production plans and that allowed the company as a whole to improve its profit margin. (Plock Refinery PIMS Model Upgrade Project with AspenTech)

- Set up and calibrated models of crude distillation units, fluid catalytic cracking unit and hydrocracking unit using PetroFine. These process unit models were incorporated into a refinery-wide model which was used to verify feasibility of proposed improvements. (Profit Improvement Program with KBC Process Technology Ltd)

- Strong and effective communicative skills on many occasions allowed me to collect process data such as plant capacities, feed and product quality constraints, raw material consumption, product yields, utility consumption, chemicals and catalyst consumption and intermediate product stream dispositions required for modeling, profit improvement projects and refinery performance benchmarking in a timely and accurate manner.

CAREER SUMMARY

PKN ORLEN SA (www.orlen.pl ), Plock, Poland, 8 years
PKN ORLEN is one of Central Europe's largest refiners of crude oil. It operates 7 refineries. Their total deep processing capacity reaches 31.7 million tonnes per annum.

Chemical Engineer
- conducted feasibility, optimization and profitability studies using the refinery PIMS model
- maintained and upgraded the refinery PIMS model
- kept track of all changes made to the refinery PIMS model
- developed and kept up-to-date the documentation of the refinery PIMS model
- generated crude assay tables in PIMS format using Spyral Crude Manager and ATS
- generated delta-based process submodel tables in PIMS format using PetroSim
- set up and calibrated non-linear models of refinery processes using PetroFine, PetroSim, Spyro
- collected, surveyed and validated refinery product lab data
- monitored crude oil properties
- monitored operation of process units
- planned and coordinated test runs at process units
- created process unit flowsheets using OSI ProcessBook
- identified bottlenecks
- supported continuous improvement
- evaluated chemical process technology
- evaluated process modeling software
- coached less experienced colleagues

Krakow Pharmaceutical Company Polfa, 6 months

Shift Coordinator
- coordinated and supervised the work of a team of operators at the vitamin B production unit

EDUCATION

Master of Arts Degree, South Asian Studies, Jagiellonian University, Krakow, Poland
Master of Science Degree, Chemical Engineering, Krakow University of Technology, Poland

PROFESSIONAL DEVELOPMENT

Linear Programming in Refinery & Supply Planning (Shell Global Solutions)
Intermediate PIMS (AspenTech)
Essential HYSYS (Hyprotech/AspenTech)
PetroFine (KBC Process Technology)
Refinery Modeling using Aspen RefSys (AspenTech)
Petro-SIM trainings (KBC Process Technology): distillation columns, catalytic cracking, hydrocracking, catalytic naphtha reforming, LP vector generation
Spyro Introduction (Pyrotec)
CrudeManager (Spiral)

REFERENCES AVAILABLE UPON REQUEST

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1551 to 1600 of 10902)Go to Search Parameters...
Brief Description
I am a Chemical Engineer and have a master's in Heavy Crude Oil Refining. i also have a master's in Work Health and Safety. I have extensive experience in Oil Refineries in the Construction and Maintenance of new plants. i am willing to travel.
Extensive work in Gas, Liquid and C02 Measurement
Automotive Painter
SEASONED MAINTENANCE AND PROJECT MGMT. PROFESSIONAL
Senior Drilling Engineer
8 years' experience in petroleum refining; process modeling; profitability studies; production planning; LP (linear programming); PIMS; HYSYS; Petro-SIM; CrudeManager; Spyro; ProcessBook; DataLink; MS Office; M.Sc. in chemical engineering (specialized in petroleum processing)
I am a petroleum engr, US citizen, with 20+ years experience as Drilling Supervisor, on & offshore, in drlg, completion, workover, testing, in the US and many other countries. Familiar with deviated drlg, horizontal, drlg underbalance, H2S, wkg in remote locs. Fluent English & Spanish.
Workover & completion supervisor
Extended experience in Supply Chain Management process and strategies development, Service integration packages, negotiations, tender exercises, purchasing, logistics, Inventory control and Warehousing.Dynamism, efficiency, objectivity and perseverance
Over 20 years of experience in Plant Operations or Maintenance.
I have 9 years experience as Material -Procurement/ Expediting/Materials co-coordinator, the assignment which included handling of all aspects of Oil and Gas Industry related SAP-SCM/ Oracle 11i5.9 based EBS, EAM,CPL modules.
Instrumentation Engineer with 12 years experience of Instrumentation & control scope of project engineering and plant maintenance in Oil & gas,petrochemical and chemical industry.
Gas turbine component Design, GD&T, Performance, CFD, CFX, Fluent, LES.
A Senior Waste management/Environmental Protection Technician with a wide range of experience Documentation/Safety Permit issuance, Isolations Procedures, Operations & Maintenance of industries, Waste management plants. Able to work on own initiative and as part of a team. Proven leadership skills
NEBOSH, INDUSTRIAL SAFETY DIPLOMA
- Experience in managing a team at the work place.
A Design Specialist responsible for managing the setup, standards, training, design-team leadership, and coordination of Intelligent Data-centric CAD work within multiple offices and Engineering disciplines, both domestic and international. P&IDs, Piping, Smartplant, SPPID
Chemical engineer having more than 12 yrs. experience in petochemical in operation and design consultancy.Also having experience in precommissioning and commissionig of petrochemical plants.
Directional Drilling Supervisor with 18 years in Oil & Gas Industry
Ph.D. in Geophysics (2005), C++, Fortran developer, geomodeller, processor. 5 years of industrial experience, 10 years in academy - geophysics and applied mathematics.
15 years real estate experience with 7 years oil and gas experience.
Business owner, aerospace mechanical engineer, U.S. Navy military veteran.
More than 7 years experienced engineers with a PHD degree in technical construction can conduct strike-calculations and dimensioning of onshore marine constructions for oil and gas production. Skillfully use software like LS-DYNA, MARC, SESAM etc for the structural analysis.
Petroleum Engineer
Maintenance, Construction, commissioning for Refineries, FPSO, Offshore Platforms etc.
Preparation of companies to ISO 9001, 14001, API SPEC Q1, OHSAS 18001 or any other Management systems standard certification.
I was working at sea for 28 years, including 12 years as a Master. Though I have a quite large experience in the trading on tankers I would like to find the same position in offshore industry, such as FSO, AHTS, PSV w/ot DP.
Experienced Senior Drilling Supervisor • 29 years hands-on oil field experience, including cyberbased Jack-ups, semi-sub and platform rigs and all size land rigs.
I was directly responsible for all completing timely daily drilling and cost control reports required by the operator and regulatory agencies; ensuring equipment and materials meet project and regulatory requirements; ensuring project inventory requirements are met; enforcing company health, safety,
Msc in Safety, HND Safety tech. NEBOSH, ASP
I am a dedicated professional who understands the importance of retaining accounts. My ability to get the job done, including quickly and accurately diagnosing and troubleshooting technical problems, has solidified the loyalty of numerous clients. I assure you, these factors, as well as the skills i
I desire to maintain a safe and efficient work standard that will reach the client goals as well as keep moral at its highest between all service groups involved. I plan to do this through excellent communication skills and proffessionalism.
Have been a Project Manager/SCM for more than 10 years, also have been in charge of Permitting.
PDMS piping designer. PDMS modul design, draft, izodraft. Layout drawings and ISO sketch. Expeience in: piping design for power plants, Steam turbines, compressor plants, support design for chemical industry and refinery
I am actually working on behalf of ExxonMobil refinery in France as a system and network engineer. I have a good experience in control systems (PLC and DCs based systems) as well as in SCADA supervisory. You can find enclosed my CV with a brief description of my skills.
Accountant, Accounts, Finance, Financial
I am capable of all aspects of the oil field.
Over 8 years(1 Year in Kazakhstan) Professional Experience in Project Document Management, Administrative and Document Control of Engineering Procurement and Construction activities of Process Plants including Oil and Gas Installations (NGL and Sour Gas Facilities), Refineries and Petrochemicals. M
Worked as Material Engineer for Saudi Aramco Material Standardization Division for Equipment Spare Parts Cataloguing Project. Proficient in using SAP R/3, MACs, UNIX and ESP4.
Experienced derrick operator, floor hand, roustabout, and driller
Welding Engineer Specialist
23 years of experience in Oil & Gas production and maintenance for offshore and onshore facilities. Experience includes in monitoring Condensate Stabilization Unit, Crude Oil Processing, Gas Compressors and Gas Dehydration System.
EDUCATION : TECHNICAL SCONDARY SCHOOL 1977
Diploma of Engineer - geologist/hydrogeologist with some experience in micropaleontology.
Work ethic, sense of urgency, accountability and a multitude of diversified experience is what I have to offer.
Twenty four years experience in the safety sector of the oil and gas industry.
Wellhead, X'mas Tree, Valves, Operations
Worked in Gas Dehydration, Well head, Gas Swetling, Utility & Tank Form& LPG Plants
Hands on experience in Primavera Planner, V 5.0, V 6.0 (Planning and Controlling Projects)
28 YEARS OF EXPERIENCE IN ENGINEERING RELATED DESIGN AND CHECKING OF MAJOR PETROCHEMICAL, NUCLEAR, REFINERY, INDUSTRIAL AND COMMERCIAL FACILITIES UTILIZING AUTOCAD, MICROSTATION, PDS FRAMEWORKS, SMART PLANT REVIEW, TRIFORMA & BENTLEY NAVIGATOR,. WORKED ON A VARIETY OF DOMESTIC AND INTERNATIONAL PROJ
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   [ 32 ]   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com