Resume - Quality control, Inspection, Installation/erection of pipes and piping component...

Misco Jobs

Resume #77006

CONTACT INFORMATION:
View contact information...

INSTITUTIONS / DEGREES OBTAINED WITH DATES:
AMBROSE ALLI UNIVERSITY (AAU) EKPOMA, EDO STATE, NIGERIA
B.ENG. (Hons) Mechanical Engineering (2ND CLASS {Hons} LOWER DIVISION) 1999
FEDERAL SCHOOL OF ART & SCIENCES, LAGOS NIGERIA
WEST AFRICAN EXAMINATION COUNCIL (W.A.EC). 1989

WORK EXPERIENCE
COMPANY: ETCO NIGERIA LIMITED BONNY ISLAND JAN.2006-TILL DATE
PROJECT: NIGERIAN LNG SIX PROJECT BONNY ISLAND
SCOPE OF WORK:
Installation of Ventilation and Air Conditioning (HVAC), Electrical Installations and Plumbing works in Substations
(SS) 6, 34, 35, 36, 37 and Field Auxiliary Rooms (FARs) 17, 18, 19.
Installation of air conditioners and general plumbing systems for wastes, fire fighting and water supply lines in
Nigeria LNG shutdown canteen, MSC workshop, MES (Mobile equipment store) and NCY (New Construction yard).
Including fan-coil units, duct works.
POSITION: QA/QC INSPECTOR (MECHANICAL)
Job Responsibilities:
Perform quality inspection activities on mechanical equipment, materials and packaged units on arrival at site and before installation, in accordance with Project Quality Plan and material specifications.
Inspection of HVAC tubing and general pipe installation.
Perform witness inspections and monitor setting, leveling and completion of packaged units.
Prepare Test packages for the pressure, hydro and gravity testing of Refrigerant, sanitary and water drinking lines. Inspect all ventilation installation such as ducts, gas tight dampers, blast proof valves, back draft dampers and various other accessories including completion/functional checks.

Inspect all plumbing works as regards to drainage, water supply and roof rainwater down pipes (both above ground and underground)
Log in for and Witness field tests and inspections according to ITP (Inspections and Tests Plan) and QCP (Quality control Procedures).
Co-ordinate all tests and assist the project manager in supervisory roles.
Give all quality reports and updates to the Quality Control manager.
Carry out tests on the split-units such as air flow test, fan and motor speed and make proper setting of the low and high pressure sensors and temperature settings.
Take part in on-site quality management audit
Inspect and record all measuring instruments; ascertaining their validity with the calibration certificates.
Inspect and co-ordinate the disinfection (sterisation) and flushing of portable water supply lines.
Take active part in the commissioning of all the HVAC units with the vendor.
Carry out Inspection with the Client and sign off documents.
Witness functionality and acceptance tests and perform final quality check prior to acceptance of equipment and materials as appropriate.
Witness and carry out noise level test, temperature and humidity tests
Prepare AS BUILT drawings for all mechanical and HVAC installation making sure that all documents were fully submitted to the client.
Prepare/collate data for final hand over to the client.
Clearing of punch items.
Represent ETCO as warranty Engineer for the HVAC units in SS34, 35, 36, 37 FAR17, 18 and FAR19 respectively.
COMPANY– HYUNDAI HEAVY INDUSTRIES (HHI) BONNY ISLAND May 2005- JAN 2006
PROJECT: SPDC (BONNY TERMINAL INTEGRATED PROJECT {BTIP}) TANK FARM
POSITION: Field Engineer (Piping)
Job Responsibilities:
Scheduling of work, supervising and overseeing work progress.
Help in coordinating various teams and assigning work to each foreman.
Collate data.
Take active part in general commissioning processes in the installation and Re-instatement of pipe spools, valves, gaskets, and various other fittings.
Carry out on-line inspection of lines to make sure that permanent gaskets were used where they ought to as well as making sure that bolts and nuts were coated with anti- rust materials (molycoat).
Hold daily meeting with mechanical fitters and other members of the crew.

COMPANY: CHICAGO BRIDGES & IRON (CB & I) BONNY ISLAND. SEPT. 2004 - APR. 2005
PROJECT: CONSTRUCTION OF TRAIN 4 OF THE NIGERIAN LNG BONNY ISLAND.
POSITION: Piping Engineer (Field Engineer Area 4 & 5)
Job responsibilities:
Hold daily S.T.A.R.T meetings and ensure maximum participation and safety application at site.
Liaise with the area superintendent in organizing, supervising and overseeing work progress.
Carry out scheduling of work for each week and for each foreman in both area 4 and 5 of Nigerian LNG train 4.
Collate data and give daily report of work progress.
Evaluate works in field piping and supports installation.
Give instruction to fitters on proper ways of bolt-ups, flange face alignments and personally supervise the installation of thermo wells, control valves and various other instruments valves
Inspect and coordinate the installation of on-line valves (such as ball valves, gate valves, Relief valves, butterfly valves, control valves, globe valves, check valves, etc) with own team.
Inspect and coordinate the installation of pipe supports (such as cold/special supports, trunnions, spring hangers/hangers, slide plates, brackets etc) with own team.
Take all field reports and discrepancies for generation of field inspection reports (F.I.R), field modifications (F.MOD)
or construction technical query (CTQ) depending on the situation.
Run field check of punch lists and sign off same when completed.
Coordinate and take part in the Hydro testing of pipes.
Request for materials from the warehouse and lay down area when needed in the field.
Attend to fitters and help in interpreting critical drawings.
Report work progress and daily liaise with area superintendent.
COMPANY: JESVAL NIGERIA LIMITED BONNY ISLAND APR.2003 – SEPT. 2004
PROJECT: REMEDIATION WORKS (Environmental Protection Services)
IN SPDC TANK FARM, BONNY ISLAND TERMINAL.
POSITION: SAFETY OFFICER
Job Responsibilities:
Prepare and carry out daily safety briefing (PEP TALK)
Create awareness in health, safety and environment and maintain it by promotional activities.
Report all HSE incidents and near misses immediately
Ensure that items of personal protective equipment issued to the employees are properly maintained.
Ensure that waste management procedures are followed.
Provide topics for tool box talks and monitor participation by all workers.
Give safety orientations to newly inducted workers and prepare safety records.

COMPANY: ANTAFRICAN NIGERIA LTD LAGOS. AUG. 2001 – SEPT 2002
POSITION: Workshop Supervisor
Job Responsibilities:
Repair of refrigeration and Air Conditioners.
Organize and oversee work progress.
Maintenance and repair of compressors, centrifugal and reciprocating pumps.
Installation of central air conditioners.
COMPANY: KEWALRAM NIGERIA LTD; WORKSHOP ISOLO, LAGOS AUG. 1998 – DEC. 1998
POSITION: Industrial Trainee.
Job Scope:
Repair of diesel and fuel generators and engines
Servicing of injectors and carburetors
Repair and maintenance of Industrial Plants (Generators)
Collating data and reporting to the workshop manager daily work progress.
NATIONAL YOUTH SERVICE CORPS (N.Y.S.C) ARAMAKO, EKITI STATE JULY 2000- JULY 2001
RESEARCH WORK:
Design and Construction of a motorized mini maize shelling machine (A project submitted to the Department of Mechanical Engineering, Ambrose Alli University Ekpoma, Edo State Nigeria.)

SKILLS & ABILITIES
Adapts easily to changes and able to work with minimal supervision.
A fast learner and able to work with people of diverse cultural background.
Good analytical, presentation and communication skills
Excellent team playing skills
Able to read and interpret P&ID and Isometric diagrams.
Conversant with ISO9000:2000, ISO9001:2000, ISO19011:2002
Deep working knowledge of EHS polices, responsibilities, risk assessment and job safety analysis
Verse in knowledge with general project rules and regulations.
Computer literate (Word, Excel, Power point, )
Certificate in HSE (Attended and completed HSE course level 3)
Valid driving license.
ON THE JOB TRAINING
HSE Induction Training (TSKJN)
HSE Induction Training (NLNG)
Waste Management training.
Permit To Work Training (PTW) Nigeria LNG
Commissioning Permit to Work Training TSKJN
Fire Awareness Training
AWARDS
Safety Crew of the Week CB&I/ TSKJN (NLNG) Nov. 2004
Safety Crew of the Week ETCO/TSKJN (NLNG) May 2006

REFEREES:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7651 to 7700 of 10917)

Go to Search Parameters...

Brief Description

I had completed M.Sc in Geology from Maharaja Sayajirao University of Baroda. I am working as a Processing Geophysicist in Asian Oilfield Services Ltd. from June 2008

Highly motivated professional, Multi skilled, with a broad range of hands on well site and design experience of both Coiled Tubing and Stimulation operations.

Dynamic Supervisor for Oil and Gas plus Engineering in the Pipe Fitting and Boiler making industry

2 year of Subsea pipeline design experience and 2 years of post-graduate Research & Development experience in Hydraulics, Costal and Maritime related area.

7 years of diversified experience in the field of Quality Management Systems. Summary : Looking for a better placement within the Oil and Gas Industries preferably in the field of Quality Management System and Document Control.

ABB Thailand 3 Year ABB Industry Singapore 3 year Raywins Engineering Solution 6 Month at present time

P G Advance Diploma in Industrial Safety + NEBOSH + B Sc [Chemistry] with 4 years of experience as an HSE Professional.

Degreed, certified and innovative IHR professional with 4 yrs generalist and 2 yrs training experience, multilingual and adaptable.

self motivated, graduate in mechanical engineering with certificate course of certified petroleum manager having 10 years hands on experience in petroleum terminal operation.

Health and Safety Engineer. Well qualified for the position of Health, Safety and Environmental Manager in the Oil and Gas Industry. Ten years of senior experience as a Health and Safety Engineer.

I am a proactive self starter/confident young result oriented Client/customer services Professional/Director with a privately owned company in nigeria with over 10 yrs of experiences in the field.

Degree in Mechanical Engineering / Mechatronics from Jordan university of science and technology. Main experience: installation of surface wellhead equipment. Previous experience: coiled tubing operations. Courses mainly in the oil & gas industry.

Techno-commercial back ground , working as senior inst. engr in a petrochemical plant in the capacity of deptt. head. Having a experience of around 7 years in steel,agro and petrochemical plant. B.E. (Instrumentation) + MBA(marketing)

Strong structural engineering knowledge, Energetic, Good analytical thinking, Self motivated, Hardworking, Dedicated person, Able to work under pressure.

Objective: It is my objective to become a contributing member of your company and further my knowledge and become a great asset to your company. I have experience with people and different countries and Cultures and plan on furthering my knowledge and skills with your company.

Process Engineer with 6 years professional engineering experience in offshore oil&gas industry on fixed & floating installations and gas terminals. Experience covers Conceptual and detailed design of equipment, debottlenecking studies, process simulation, plant modifications & Flow Assurance

Helicopter view, fast analysing, creative in finding solutions, mind setter for safety

LARGE AND STRATEGIC PROJECTS MANAGEMENT - BUSINESS AND OPERATIONS MANAGEMENT

Mechanical Engineer,masters in Engineering Design,CATIA V5,SOLIDWORKS

Qualification: Diploma In Civil Engineering(3Years), Over 11 years experience in Land surveying, the majority of which has been spent gaining experience of Surveying works using modern surveying equipments and Surveying software.

B-GAS LEVEL II PAINTING INSPECTOR.MORE THEN 15 YEAR EXPERIENCE IN INSPECTION FIELD.

2D and 3D cad applications - upstream and downstream experience

12 Years experience in civil engineering, design, procurement, construction & supervising of particular relevance to the project are as follows :

10 Year Experience, 5 years Implementing SAP FI/CO and BW / BI / Netweaver Solutions for Banking, Manufacturing, Sea port industry, Maintaining SAP BW Solution for Oil and Gas Industry

Heavy Equipment Operator to include Mobil Cranes, Crawler Cranes, Overhead Cranes, Forklifts, and Tractor/Trailer

Quality control, Inspection, Installation/erection of pipes and piping components, HVAc, HSE, Computer literate

DCS and instruments el.engineer.International experience.Experience in Chemical,mainly in Pulp and Paper (equipment-similar to used in Oil&Gas,Cement,Fertilizers,etc)Industry

My skill set includes Embedded systems,RTOS,vxworks,microcontrollers,embedded linux,device driver development(Block and Non Block),I2C,SPI,En50221,IEC,CAN,SAE J1939,Modbus,Canalyser,CAPLE scripts,embedded linux(2.6 kernel),MicroC OS,windows mobile os(WM6.1)

I have extensive experience in coal analysis, material distribution systems, combustion systems, power generation and all associated chemical processes

Mechanical Engineer with expereince in AutoCAD 2000, Piping, Welding, Installation and Erection Works, Production Plainning, Supervision

6 years experiance in Air seapration Plant

Mapping Specialist

B.Tech in Electronics & Instrumentation, working on under water hydrographic equipments

Looking for a MWD career

Skills: Tally, Daceasy, ATG (KSA), Digitek (KSA), Windows / MS Office & Tools etc.

Management skills & can drive a forklift

Handling of Benzene,O-xylene,Ethylene,Panel operation (SCADA),Jetty operation and ship Unloading

Scheduler, Primavera P3E & Expedition

Land surveying relating to boundaries, design, construction, and mapping.

Jouryneyman Millwright - Alignment Specialist - Lazer, Reverse and Rim& Face. I have installed and rebuilt steam and gas turbines, crushers,conveyors, ball and sag mills, tower mills, pumps, compressors, blowers.

I am a BS Mechanical Engineer who had served primarily as a Senior Fire Protection-Applications and Design Engineer for around 17 years plus and 5 years as an Occupational, Health and Safety practitioner in a petrochemical industry with a primary function as Fire Safety Engineer. My specialty profe

Business planning, estimating, planning and scheduling, cost control and reporting, contract management, earned value, productivity monitoring, claims disputes and resolution, lean construction, high level presentations, multi tasking, meeting deadlines, and creating win-win situations.

Diploma in Chemical Technology working with BJ process and pipe line services as an operator having precommissioning and commissioning exp

Documents Controllers / Project Administrator

I have completd my Master's Degree in june 2005, previously I had B.com Degre, I am fully knowledged about the administrative techniques

Computers, customer/technical support, java, php, internet, web-design

A metallurgy n materials engineer with 3.5 years of experience in the field of Metallurgy, QA, Heat Treatment and Inspection & Testing. Worked with various international standards viz. ASTM, ASME, NACE, EN ISO and DIN, also well versed with customer specific standards like Aramco, Shell MESC etc.

Testing, Maintenance and Troubleshoot of Electrical,I.T.I in an Electrician

I have sound knowledge and hands-on experience in Pipe Inspection and Standard gauging practices. OCTG's, pup-joints, couplings, cross-overs and making-up of connection ends is my specialty. I will always deliver anytime and anywhere i am called upon and always keep abreast with latest technologies.

20 years of experience (Eight year in Gulf) in varied discipline of Engineering i.e. Quality Control and Assurance, Inspection and Expediting, Piping Specification, Material Handling equipments & system specification, Shutdown maintenance Inspection, Construction Site Inspection(Piping,PV)

First Prev 151 152 153 [ 154 ] 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out