Resume - 12 plus years experience in the operation of various Hydrocarbon processing unit...

Misco Jobs

Resume #77105

CONTACT INFORMATION:
View contact information...

l Lead/Snr. Production Operations Engineer.
(Sunlink Petroleum Nigeria Limited, Partnership with SNEPCO (SHELL) on OPL238 Offshore Nigeria) Feb. 2007 – till date.
-OR&A lead, project Technical team member, responsible for operations readiness deliverables during the development project phase and ensure properly planning for all aspects of operations.
- Manage and lead operations team, deliver operational objectives, responsible for day-to-day operations and to ensure compliance with statutory regulations and company procedures.
-To ensure a flawless start-up operation readiness review and pre-start-up audit are required to confirm the state of operations readiness.
-Ensure timely completion of a project and to maximize facility uptime post start-up.
-Develop the SWOT (strength, weakness, opportunity, and treat) of the project.
-Develop operations assessment and review FDP with team.
-Develop operating philosophy of the project.
-Coordinate recruitment and training of operating personnel.
-Oversee the operating of the field lifetime, as the major operator of the field.
l Production /Operations Superintendent. (Company representative)
(Express Petroleum & Gas Company Limited, (Trinity FPSO) Feb. 2006 – Fed. 2007)
-Direct/control daily production activities of three-phase separation process, gas/water injection system, chemical treatment, gas dehydration in a safe manner.
-Ensure properly treatment of produce water to specification before disposing to approve destination.
-Review daily production/well test and advice as required.
-Monitory & surveillance of production data, optimization of wells and surface process facilities.
-Understanding of production operations, including: process shutdown logic and effects, methods and consequences of isolation and depressurization, hazards associated with pipelines, simultaneous operations and marine operations.
-Understanding of the effects of environmental conditions, and the potential effects of combined operations and of external operations: diving, supply vessels.
-Carry our production engineering needs such as wells, facilities and pipelines analysis, well performance analysis, artificial lift needs, reservoir surveillance, candidate recognition and completion engineering.
-Thorough understanding of the FPSO emergency response organization and plans; Escape, Evaluation and Rescue methods, including helicopter and standby vessel operation.
l ASST. PRODUCTION/OPERATIONS SUPERVISOR.
(Prosafe Production Pte Ltd. (A BO FPSO) (JAN, 2004 – FEB. 2006)
-Co –ordinate and control all production and production operators in safe operation of the production system: process system, water/gas injection system, and dehydration system and reservoir management to achieved good production operational practices.
-Checking the daily deferment report to ensure that all events and activities are been reported l -snr. production operator
(prosafe production services pte ltd. (abo fpso production) april, 2002 – jan 2004)
-dcs knowledge, scada, plc, management of hydrocarbon and process control system.
-pre-commissioning/commissioning, initial start-up operation and mechanical installation with aid of pi&d's/ process flow scheme design.
-in- depth knowlegde in operations of topsides equipment such as process plant module, gas injection system, water injection system, chemical injection system, metering skid, glycol dehydration/regeneration system and reservoir management controls.
-experience in laboratory analysis of crude product, such as api, crude density, bs&w and reid vapour pressure (rvp).
-production system optimization and reservoir surveillance.
-knowledge of well test / test report inventory.
l hydrotest engineer and piping engineer.
(daewoo nig. ltd. abam base okrika, port harcourt. jan. 2000–april 2002)
- construction/ pipe laying.
-hydrotesting routine job planing, general checking of pipeline section.
-general co-ordinator of epc of agg project (spdc contract).
-general supervision of n-lng phase 3 gas supply project (agip).
-cleaning, frushing, gauging, water filling, pressurisation, temperature stabilisation.
-strength test, leakage test, depressurisation, dewatering, drying.
-hydrogen purging, vaccum drying, de-oiling.
-running of caliper and intelligent pig.
-pre-commissioning and commissioning activities l field engineer/ maintenance.
(global offshore drilling company, km 14 aba expressway port harcourt. july 1998 – dec.1999)
-hydrotest pipeline/drill pipe for strength and leakage.
-standby rotary to make pipe for hang off.
-standby for instructions from driller.
-mixing of drilling fluids, such as baritye, bentonite, lemons and industrial salts.
-checking mud quality, such as density and viscosity.

l surface/sub-surface production engineer/programming.
(production/tech. department (pt)), spdc-port harcourt. sept. 1997 – 1998).
-reservoir surveillance.
-programming wells for routine and thru. tubing jobs: -
l swabbing jobs nitrogen lifting.
l re-perforation, re-completion, bhp survey.
l wax cutting and acid stimulation.
-validating conduit oil production test and plotting into graph.
-recording and filling of sub-surface well job reports.
-keying conduit test and pressure values from chart into epproms.
-recording daily report of gross production into epproms.
l process maintenance engineer trainee
(process department. spdc port harcourt, july 1997 – sept.1997)
-in charge of spot exercise, surface optimization.
-site visit to ensured proper running of flow station using process flow scheme.
-identify/define bottlenecks in the system.
l industrial attachment: as wellsite engr trainee.
(well engineering deprtment. feb. 1994 – july 1995)
-check the quality of mud, calculation of density, viscosity and mud tank level.
-keeping record of workover job, drilling tools at site.
-check the proper running in of drill pipe, drill collar and tubing.
-daily morning report to office. and workover operation job.
l research project: risk analysis theory in fishing operation.

local government area: isoko north (owhelogbo).
place of birth: abigi, ogun state.
cumputer knowledge: microsoft words, excel, power point, ms dos.word perfect.
hobbies: swimming, reading and travelling.
REFERENCES:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1851 to 1900 of 10917)

Go to Search Parameters...

Brief Description

My skills as a drilling foreman are Drilling, Work Over, Completion and Safety. I have 40 years of oilfield experience. I have an up to date Well Control Certification.

Pipeline & facility supervision

Looking for and Field Operating Position / Production Coordinator, Can also Well Service

Repair, maintenance and troubleshooting onshore and offshore units (ONCC, OLU), Generators, Compressors (WAC-SS22, WAC-QB), Hydraulic units (EHPS, DAPS, OSU,OSLC), HVAC. Hook – up, setup and installation offshore & onshore equipments Corresponding with Customers and Suppliers I have

I am someone who is highly motivated and organized. I have over 20 years in the construction industry, including work in Western Canada and time in Angola as a Construction manager, where my duties were tto evaluate and implement new processes to achieve cost certainties in an exploration environmen

I have extensive supervision and management experience (including QA/QC) on contracts valued from £30 million to £3 billion in the fields of Oil & Gas related work, military airfields, Power plant construction, water provision and dam construction in the Middle East, Africa and the Caribbean.

Reservoir or Production Engineer

Social Responsibility Specialist

Mechanical Engineer, with +30 yrs experience in Quality Assurance Management and Engineering Management, executed more than 10 projects in Fertilizer, Refinery and Petrochemical industry

Petroleum engineer with 20+ years of diverse experience. 4 years of multi cultural supervisory experience in North Africa. References available on request.

Process design for some of the largest Oil and Gas production systems (offshore/onshore) and pipelines (including Jamnagar Loni LPG) in India have been done directly by me in Engineers India (EIL) or withands on supervision (complete Process Design responsibility from concept to comm. of project).

I am writing to your goodselves wishing a reply to my present request. I would like to apply for the post of Production Operator or any other Board man . I enclose my resume with the name of referees.

Piping Designer

Petroleum Engineer with various and quantifiable exposure in production and reservoir engineering roles. Been involved in both onshore and offshore work environment, mature and new field development, heavy/light oil and gas wells.

Power plant project, O&M professional

Have surveyor, title abstractor, draftsman, networking and landman experience.

Static equipment like vessel, tank and heat exchanger

BS Ceramic and Cement Technology, my experience is working in the field of Refractories and insulation, i have about 12 years field experience.

12 plus years experience in the operation of various Hydrocarbon processing units located offshore (production platforms, and FPSO) and EPC company. My current position is that of Snr. Production Operations Lead with Sunlink Petroleum

corrosion and cathodic protection

Electrical Engineer with sea /offshore experience, familiar with automation, DP courses,PLC control,

Planning, executing & managing large projects involving implementation of Information & Communication Technology systems.

For the past 8 years, I have been working with Abu Dhabi Gas Liquefaction Co Ltd (ADGAS). I am well versed in all the LNG Sales Contracts like Heads of Agreement, Term Sheet, Gas Sales Purchase Agreement, Confidentiality Agreements, Sales and Purchase Agreement for both FOB and Ex-Ship sales.

Ph.D in Safety Engineering, looking simililar job either consultant, or mining, mechanical engineer or any safety related job

18 years experience the Business, Commercial and Supply Chain Strategy and New Business Development for a large range of organisations and business types. Experience in oil & gas and manufacturing (Head of Business Services Brunei Shell).

See resume body

Planning / Scheduling, Project engineering, Subcontracts administration, Primavera, Open Plan,MS Office,Pipeline design/construction/replacement

Objective: I would like to pursue a challenging position in the oil and gas industry working as a development geologist developing oil and gas fields along the Texas Gulf Coast.

Maint Planning, Materials management, warehouse, plant maint, turnaround, project

I am a Mechanical Engineer from Madras University in the year 1981. I have over 18 years of Offshore oil fields experience in production Operations of oil & gas and water injection.

Ph.D in Geophysics, over 12 years industry experience in offshore and onshore seismic 2D/3D data analysis, processing and interpretation

Reservoir/Geoscience Technician

Completion/Workover Supervisor

Oil and gas production, well testing, gas lift wells performance, Gas lifting optimization and automation, Gas sweetening efficiency, improve chemical injection to better water separation and minimize the consumables, giving training of local operators and engineers. Operation and production techno

I am a Chemical Engineer having 10 yrs of valuable experience in various areas of petroleum refining including unit operation, Revamp jobs, Process engineering, Process Modification, PFD/P&ID review, HAZOP study, Safety review, troubleshooting, Advance Process Control, Simulation Studies

Project Controls/Cost Engineering/Analyst

Mechanical Supervisor/technician

Mechanical Commissioning/Start-Up &Generation advisor engineer

Piping supervisor/ Project Manager

An Electrical Engineer having 10+ years of experience in Petroleum & Petrochemical Plants

10 yrs in fuels, postions held operator, supervisor, special projects, op's manager in USA, Iraq & Afghanistan

Experienced in land operations on small and large rigs. Team player. Works well in simultaneous operations to maximize results for the client. Speaks Spanish as well as mother language of English.

I have spent almost of my ten years experience in Petroleum Company that will give me deep knowledge to support my ability. My educational and computer literation background as described below will also support me to do my work.

DCS, PLC, Automation Specialist

A competent Fire Expert, with an extensive Fire & Safety background, and knowledge in corporate guidelines. A proven professional and Technical Communicator with expertise in Loss Prevention, Safety & Fire Protection support, safe work practices, fire systems and design reviews. He has been accounta

Free! Senior marine officer with extensive experience in the offshore oil & gas industry,Currently shorebased marine regional manager

Instrumentation ICSS commissioning specialist

I am a career driven individual with desire and ambition to succeed, grow and develop with a dynamic and professional company like yours, one that can afford good prospects coupled with challenge for professional achievement and satisfaction.

Sr. Designer with Autocad,Microstation, PDMS,AutoPlant, SmartPlant

DCS Operator with more than 15 years Experience

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 [ 38 ] 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out