Misco Jobs	|  Go to Job Seeker's Center »»   |
	«« previous resume Resume #77171 next resume »» CONTACT INFORMATION: View contact information... ACADEMIC QUALIFICATIONS AND APPROVALS: AINDT Accreditation Level 2 (EN 473) Certificate For ultrasonic testing, Date Of Issue: 01-04-04; Registration No: 2208 Internal Phased Array training carried out by Quadsonics 120 hours Radiation Safety Licences held for: Radioactive Substances Irradiating Apparatus In,QLD as Radiation Safety Officer Accreditation Certificate: (Licence No: 805739-5556713A) QLD Health Department Assessing Industrial Radiography Equipment for Compliance with the Standards Central QLD University: Radiation Safety Course Dangerous Goods Course: (Certificate No: -2000923) CASA Approval: SERDG 33/00 (Course Class 7) ASNT Level 2 Ultrasonics CW Pope ASNT Level 3 Radiography, Magnetic Particle and Dye Penetrant CW Pope 2006- 2008 Quadsonics Pty Ltd Position held: AIS Technician / Supervisor Carried out and managed advanced inspection activities throughout Australia, Asia. Thailand and Kazakhstan. The following covers experience over this period: * Phased Array inspection of new pipework to ASME code case 2235.9 * Phased Array inspection of new pipewelds to AS4041 iun the power industry * Phased Array inspection of welds to AS4037 in the vessel fabrication industry * Phased Array of in service weldments in refineries and power stations * Inspection of new boiler tube welds using Phased Array technology * ToFD and PA combination inspection in refineries, tank farms and power stations * Training new technicians in the use of Phased Array and ToFD * Phased Array inspection of welds to AS4037 on stage 2 of the the Comalco Alumina refinery project for Bechtel 9 months (in excess of 3000 welds tested) 2006- BHP Billiton Position held: NDT Technician Duties:- Contracted to carry out inspections of pressure parts and components. 2006- Intico (Darwin NT) Position held: NDT Technician/ Consultant Duties:- Contracted to Intico to audit systems and train technicians. 2006- Diamond off Shore (Karatha WA) Position held: NDT Technician Duties:- Contracted to Diamond to carry out inspections of pressure parts and drill rig components aboard the Ocean Bounty drill rig. 2006- CS Energy Position held: NDT Coordinator/Technician Duties:- Sub contracted to CS Energy to provide NDT and QA services during power plant shutdowns 2006- NSS (Neftesroi Service LTD) Position held: Project Manager Duties:- Employed by Neftesroi Service LTD/ PFD in Asia to co-ordinate the initial setup for Nucleonic sources and devices for plant use. 2005- CHEVRON OIL Position held: Ultrasonic Technician/TOFD Technician Duties:- Employed by Parsons Fluor Daniels of Asia in Kazakhstan to carry out ultrasonic inspection of 20mm to 62mm butt welds on the Sour Injection Gas plant. 2004 STORK – COOPERHEAT Position held: Area Supervisor Duties:- Employed by Stork- Cooperheat of Australia Pty Ltd in Gladstone Queensland to operate a small regional NDT branch. Some of the projects completed during this time are: * ToFD of in service pressure vessel welds at various sites throughout Australia * Elgas Victoria – critical defect sizing utilising the ToFD technique and visual inspection of tanks * NAP upgrade for Orica in Gladstone involving Radiography, ultrasonics and surface methods * Site coordinator for CS Energy power plant shutdowns. 2002 STORK - COOPERHEAT -2004 Position held: ToFD Operator Duties:- Employed by Stork- Cooperheat of Australia Pty Ltd to carry out Time of Flight / Automated Ultrasonics on the Comalco refinery project Duties included ToFD inspection of pipe welds to ASME code case 2235. Sizes inspected ranged from 150mm diameter 10.97mm wall thickness up to 500mm diameter 26.19mm wall thickness. I inspected in excess of 2500 butt welds utilizing the ToFD technique combined with Pulse Echo. The system utilized was Technology design eight channel coupled to a magman 8 scanner. Manual ultrasonic inspection of close out welds and longitudinal seam weld in fittings as well as surface methods was also completed as part of my workload on this project. I also fulfilled a role of QA/QC for the client. 1998 - 2002 CCI POPE Position held: Technician/Manager Duties:- Employed by CCI - Pope Commenced employment with CCi Pope as a senior technician where I completed Popes in House ASNT certification program gaining L3 in RT,MTand PT and L2 in UT. L1 ToFD course was also completed during this training. Projects completed during this time included the following: * ToFD inspection of 100% of all welds to API 650 for CBI's Orica import terminal tank project. This included a proficiency qualification conducted by CBI QA from the USA and resulted in a total of 5000 Metres of weld of thickness ranges 14mm-60mm. * Moura mine pressure vessel inspections * Orica - pressure vessel inspections under the guidance of Russell Lumb services Australia * Millmerran power station construction * Callide "C" power station construction * Corrosion mapping using the TD scan equipment on ship ballast lines * Project manager oil-shale project Gladstone I further progressed to management and spent a year and a half as branch manager in Gladstone 1992-1998 Queensland Alumina Position held: Quality Control Inspector Duties:- Responsible for incoming goods control and all aspects of NDT including ultrasonics and surface method inspection of pipe welds, vessels and tankage 1982 - 1992 EVANS DEAKIN ENGINEERS Position held: NDT Technician Duties:- All aspects of NDT including weld inspection utilizing Radiography and Ultrasonics, Thickness testing and surface methods on Pipes, Vessels, Tanks and Structural fabrications. View contact information... «« previous resume next resume »» Search Results (Resumes 1351 to 1400 of 10924) Go to Search Parameters... Brief Description Over 14 years work experience in various fields i.e. IT/MIS/Help Desk, Storekeeping, Banking and Finance, Clerical and Production Finance Manager, Qualified Accountant 20 years Experience in the Acquisition of Oil and Gas Leases, Title Examination, Title Curative and Management of Small, Medium or Large Scale Projects within the Rocky Mountain Region Level 2 UT EN473, RSO, Previous Level III PT,MT,RT. Advanced inspection in Phased Array and TOFD - Good computer skills I am seeking a long term employment contract within a company as Rigger. Experienced Coal Geologist and Oil & Gas Development Geologist, results-oriented, very strong mappiing, modelling, drilling program design and oversight. civil/structural engineer/manager Petroleum geologist, and specialized in a diversified spectrum of upstream petroleum activities. He also has a long and excellent employment record in both petroleum business and management. Master Mariner with experience of LPG/C and LNG/C B.Sc. in Geology, M. Sc. Geophysics Working as Co-coordinator & D. Geophysical Manager Petroleum/Oil/Gas - Economics and Technical Management - Chem Eng - 30 yrs exp. 19 years Project/Turnaround Planning, 2 years in EP Maintenance Planning experience in O&G offshore & onshore; at senior capacity. Well versed in Planning software e.g. MS Project, Artemis & working knowledge of Primevera. Excellent in MS Office tools & MS Access. I have worked in the Oilfield for over 16 years. Where by I have gained valuable experience in all down hole tool applications as quoted below. I have managed bases in different countries, and trained people from all walks of life. I enjoy my profession. Chemical Engineer with Professional skills in Sea Water Desalination, Drink Water Production, Waste Water Treatment, Steam Production, Nitrogen Gas Production, Sulphuric Acid Production, Electrolysis – NaOH, Cl2, HCl Production Skill gained over eighteen (18) years of experience on all aspects of Rotating Machinery and static equipment for onshore and offshore applications including specification and selection, contract technical evaluation, execution of modification and minor changes, design approval, witness testing, ins Treasury professional with 20 years experience working for three Fortune 500 companies. Position leading to a career in Environmental Management/Planning with an International Oil Company or a recognized International Consulting Firm. 30 years of professional experience. Having experience in seismic data acquisition and processing including velocity analysis, de-convolution,wavelet processing, migration velocity smoothing, VSP, Well logs, strong knowledge in computers and Seismic Unix processing. M. Sc (Exploration Geophysics). SUMMARY Exploration and appraisal geosciences professional with extensive background in domestic and international prospect evaluation and reservoir characterization. An accomplished, resourceful, and versatile oil finder with strong communication and interpersonal skills. A western educated finance professional with 23 years of accounting, strategic cost analysis, corporate finance, listing, valuations, banking, project finance and execution, supply chain, restructuring, turnaround, strategy, business development and board experience with world class multinationals. More than 20 years as a Petroleum/Reservoir Engineer in Exploration and Production Company with heavy emphasis on reservoir management: India (Oil and Natural Gas Corporation Ltd.), Kuwait (Kuwait Oil Company), Abu Dhabi (Zakum Development Company) and Oman (PDO-Shell). An Oil and Gas Professional with expertise in International Operations Management, Assessment of Technical Data, and Long-term Business/Budget Planning. Managed international operations, PSC and construction contract negotiations, liaise with foreign governments and, field exploration/development. HAVING 23+ YEARS OF SERVICE ,INCLUDES 20YEARS IN INDIAN AIR FORCE AND PRESENTLY ENGAGED WITH PRIMUSTELECOMMUNICATION INDIA LTD Business Analyst Technical Writer Project Manager Programme Director Take advantage of 30 years corporate experience. I can train your junior staff to become very proficient with Paradigm's GEOLOG 6 software. My specialty is reservoir characterization, with emphasis on probabilistic log interpretation using GEOLOG's Multimin program. Worldwide contracts considered. Electrical, Control Systems and Instrumentation Engineer: great international experience designing, installing, testing, calibrating, starting up, commissioning, maintaining and repairing industrial electrical, instrumentation and control systems, in the natural gas and others industries. Senior Engineer with Masters in Business Administration and possessing over twenty-two years of experience in Electrical/Instrument Maintenance and Project works in refining and petrochemical industries. QHSE Manager, EOD/UXO consultant, height safety specialist, International experience and dedicated professional. SAS and COBOL Programmer with DB2 and SQL experience OBJECTIVE Seeking a challenging position at senior management level in R&D and Manufacturing / Technical Services / Applications Development / Technology Strategy Planning./Project Implementation Offering MBA Leadership, insightful, analytical, and creative engineering leader successful in conceptualizing and implementing cost-effective solutions and leveraging key advantages in complex environments. Resourceful team builder and project manager adept at building and leading teams. Over 20 years of Oil and Gas experience using/supporting technical applications for oil companies & vendors (Landmark, Geoquest, and Paradigm). The past 8 years, my focus is on project management, building/leading application support team, workflows, database, data management and GIS solutions. PDMS Desgn,Draft, Isodraft and Catalogue Creation and MDS supports ELCTRICAL ENGINEERE Level 4 scheduling in oil&gas with Primavera Continuous scaffolding job for more than twenty (20) years in the field of construction, Petro. Chemical Plant and Oil & Gas Industry. I am a mathematics post graduate alongwith apprentice training in refiney technology. I have choosen refinery tech. as career. Approximately 17 years in Petroleum and Petrochemical industry working as a Plant Manager/superintendent/shift controller/ Supervisor / Operator including 13 year on ovseas. Electrical & Instrumentation Inspector - Broad experience in E&I installation in Fabrication of Offshore Production Platform, FPSO, D.P Cable Laying Vessel and Oil & Gas Refinery Plant. (Knowledgeable in industry standard recommended practice: NEC 500, IEC/NEC 505, API RP14C, 14F. Instrument engineer Barge Anchor Operator, Rigging, Scaffolding Foreman offshore, Crane driver 100t and Tower. To Carried out overhauling, repairing preventive, corrective breakdown, and shutdown mechanical maintenance, trouble shooting, condition monitoring, alignments, hydro testing, of rotating & static equipments, like pumps, compressors, fin fans blowers, heat exchangers, column, and using all type of I have worked more than 12 years in Oil & Gas, Refinery, Petrochemical industry as a field operator and DCS & SLPC control panel operation at off-shore & On-shore. 18 years experience in Gas- Petrochemical industries as sr. Technician, assistant shift supervisor, etc My strengths are my ability to take charge and work well within a team environment and in my experience in developing algorithms from concept phase to commercial implementation Read blue prints, electrical scymatics, troubleshooting and repairing electronic devices for the industrial sector and wireless communications equipment. Information Management, Data Management and CAD Systems Management Over than 9 year experience joint in Oil & Gas industrial. Specialize on inspection, testing and documentation for fabrication, installation structure and piping work for offshore Jacket structure and pile make up, process & living quarters offshore platform, FPSO piping process and floating system, I have experience in all phases of both electrical and petroulem experience. 20 years experience in the Instrument & Controls through to Information Management arena I am an experienced engineer with productive employment and education in the field of processing, supervision, commissioning, start-up operations, production and design. First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   [ 28 ]   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last Seach Parameters Change search parameters... INDUSTRIES: Petroleum/Oil/Gas; Change search parameters... Keywords: (e.g. mining engineer) Find results with: ANY of the words ALL of the words WITHOUT the words Save this search parameters... Post job with this search parameters... Frequently Asked Questions What's the most effective way to perform a search? Go to Advanced Search 1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results. 2. Enter one or two of the most important keywords. Click 'Search' and look through results. 3. To search within results add more keywords. How can I find resumes that contain specific exact phrase? To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD". More Frequenly Asked Questions...
Employer's Center » Employers Home » Feedback » Help » Post Jobs » Edit/Delete Jobs » Search Resumes » Resumes By Email » My Account » Log In » Log Out
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com