Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #77208 next resume »»
CONTACT INFORMATION:
View contact information...

OBJECTIVE

To gain employment with a company where I can use and develop my experience and knowledge effectively.

EDUCATION

Istanbul Technical University, TURKEY,
Bachelor of Science in Petroleum and Natural Gas Engineering, June 2002

Final Resource Project; Determined and interpreted complex lithologies at Batman Field, TURKEY with various techniques by using porosity and resistivity logs.

PROFESSIONAL EXPERIENCE

Drilling Supervisor – EniRepSa Gas Ltd. (ENI – REPSOL – SAUDI ARAMCO JV.), AL KHOBAR, KINGDOM OF SAUDI ARABIA (June 2008 – Present)

Supervise all drilling, completion and well testing operation at Block-C Area (Wutayd&Murayt) fields with Saipem IDECO 3000 electric drive rig. Worked in 2 deep vertical exploration, high pressure and high temperature gas wells as deep as 17,000 feet with heavy mud weights as high as 1.7 sg in H2S concentrations of 100 ppm. Experienced DST, TCP perforations, well testing, coil tubing opeartions, hydraulic acid frac, running tie-back liner.

Night Drilling Supervisor / Well Site Drilling Engineer – SPD -PETROFAC& DUBAI PETROLEUM, FATAH, RASHID, FALAH FIELDS OFFSHORE IPM PROJECT, GULF OF ARABIA, DUBAI, UAE. (April 2007 – June 2008)

Supported Day Drilling Supervisor in the planning, implementation and execution of all drilling and completion operations on Nobel Roy Rhodes Jack up rig at Fatah, Rashid and Falah fields. Performed operations as per the HSE regulations and assisted the HSE supervisors to ensure that safe systems are put into place for all work area. Participated and encourage crew for STOP card system. Ensured all data collected is accurate and reported and distributed correctly in a timely manner. Created reports for base (daily, monthly, EOWR, lessons learned, cost tracking, time tracking etc.) Report all wellsite activities and events.
Experienced in horizontal drilling, sidetrack, downhole motor applications, MWD/LWD/PWD, running liner, coil tubing - stimulation operations. Major problems encountered that complete circulation loss, liner and pipe sticking in reactive shales, hole cleaning problems (pack off, cavings) in deviated wells ( more than 900 angle), recovering old completion string (scaled up string, NORM detection etc..).

Drilling & Workover Supervisor – NOBEL OIL LTD. GUNESHLI FIELD, OFFSHORE FISHING & SIDETRACKING PROJECT, BAKU, CASPIAN SEA, AZEBAIJAN.
(January 2007 – April 2007)

Supervise operations including many fishing and completion activities on SOCAR Guneshli Field deviated wells. Responsible for all washover, casing cutting, milling, squeeze cementing, back off operations and fishing by using both internal and external catch tools.

Well Site Drilling Engineer/Drilling Supervisor – PETPRIME INTERNATIONAL & OIL SEARCH LIMITED JV, PULKHANA & BINA BAWI FIELD PROJECT, IRAQ (March 2006 – January 2007)

Supervised operations including all drilling and completion activities on Romfor Rig # 22 at Pulkhana and Bina bawi field. Responsible for full engineering analysis of rig site data and preparing regular well reports at Pulkhana and Bina bawi Field that have exploration and as deep as 10500 ft vertical oil wells.
Major problems encountered that complete loss at limestone and dolomite fractures and high pressure oil kick.

Night Drilling Supervisor/Drilling Engineer – CALIK OIL&GAS, TURKMENISTAN PROJECT WITH PARKER DRILLING COMPANY, TURKMENISTAN (Jan 2005-March 2006)

Supervised operations including all drilling and completion activities on Parker
Drilling Company rigs (EMSCO Electric drive kelly and top drive Rigs) at Akpatlawuk (Nebitdag) and Yoloten field (Mary) that has deep and high pressure gas and oil wells In Turkmenistan.

Responsibilities undertaken:

* Carrying out full engineering analysis of rig site data and preparing regular well reports.
* Select drill bits, perform drill off tests,
* Make drilling optimization,
* Supervise preparation and conditioning of spud and/or lignosulfonate mud when no mud engineer is assigned to the well,
* Supervise conventional coring,
* Supervise basic fishing operations,
* Prepare casing tally and supervise while running casing,
* Supervise cementing operations,
* Supervise selecting, installing and testing of well head equipment,
* Supervise well control operations when necessary,
* Manage logistics on wellsite (both personnel and equipment)
* Coordinate and work together with the service companies.
* Perform safe and efficient drilling operations.

Worked in more than 10 deep vertical, exploration and development, high pressure and high temperature oil and gas wells as deep as 12,000 feet with heavy mud weights as high as 2.2 sg in H2S concentrations of 10 ppm. Major problems encountered were differential sticking, lost circulation and well kick. Experienced in top drive drilling, drilling and coring in salt doms, running liner and drilling with oil base mud, under-reaming operations, setting Ez-drill packer, squeeze cementing, injection tests and perforations by using TCP and through tubing techniques.

Assistant Rig Manager - ARAR PETROL GAS AUPAS, TURKEY, INDEPENDENT DRILLING, EXPLORATION, SERVICE COMPANY WITH N.V. TURKSE PERENCO AND AMITY OIL, TURKEY, (Aug 2002 – Jan 2005)
This work includes all phases of drilling, sidetracking, MWD, horizontal, well control, coring, fishing, directional drilling at Diyarbakýr & Thrace field development and exploration oil and gas wells. Worked in more than 12 oil and gas wells as a contractor of Perenco and Amity Oil Company with IDECO Rambler H-44 diesel drive mobile rig.

Witness cutting and recovering casing from a dry well and sidetracking, MWD operations. Experienced stuck pipe and cutting transport problems in highly deviated well bores and two stage cementing operations. Supervised many basic fishing and coring operations
LANGUAGES SKILLS
English Excellent at writing and reading; good command of spoken.
Russian Beginner Level
Azerbaijani Intermediate Level

COMPUTER LITERACY

Highly experienced in MS Windows applications; Word, Excel, Power Point. Active user of professional engineering softwares in drilling engineering ( Peleton WellView);

Peleton WellView is a database for drilling services. Creates reports such as daily drilling reports, casing and cementing, bit & BHA records etc…

COURSES & CERTIFICATES

* Well Control Courses (IWCF), TPAO Ankara, TURKEY (Valid until Nov 2010)
* LPG Technologies and Applications, AYGAZ, Istanbul, TURKEY (April 2002)
* H2S and Fire Emergency Procedures, SUNBELT, Mary, TURKMENISTAN
* Offshore Survival, Gulf Technical and Safety Training Centre, Abu Dhabi, UAE ( Valid until May 2010)
* Fire Fighting Course, Gulf Technical and Safety Training Centre Abu Dhabi, UAE (Valid until May 2010)
* Offshore Safety Orientation, Dubai Petroleum Office, Dubai, UAE (May 2007)
* Member of Society of Petroleum Engineers

View contact information...
«« previous resume next resume »»
Search Results (Resumes 7601 to 7650 of 10917)Go to Search Parameters...
Brief Description
• Excellent interpersonal skills • Excellent leadership abilities • Thorough individual with good analytical skills • MS Power Point presentation skills • 4 years experience spanning academia and industry
EXPERIENCED,WILLING TO EXPLORE AND GOOD TEAM PLAYER
B. Tech Applied Geophysics Second Class Upper Division Experience in seismic and well log interpretation, petrophysical calculation, volumetrics, Drawing of geologic cross-section. ·Drawing of Geologic cross-sections. Deep Operations Wellsite Geologist (MG Hulme Jr Rig)
Degrees in BSc(GEOLOGY) and BCom(FINANCE). Experience in E&P companies undertaking economic modelling, reservoir performance and completions, and development geology.
PRODUCTION/PROCESS/OPERATION ENGINEER
Bachelor of engineering degree in metallurgical and materials engineering (b.eng). grade: second class upper division.
Engineering background consisting of manufacturing, project organization, and design disciplines. Experience with factory and marine environments, office and fieldwork, and ability to interface with a variety of people.
A Chemical / Process Engineer
Over 5 years of experience in petroleum industry, including, but not limited to various aspects of management and monitoring of the oil fields, wide usage of environmental engineering, performing general overall supervision, conducting communication with vendors and consultants.
An engineering position with potential for professional growth and advancement.
Mechanical Field Engineer; 5 years experience; Industries: Construction, Oilfield Services & Transportation; Areas of Interest: R&D, Field Engineer, Project Management
Chemical/process engineer
Industrial Electrician / Instrumentation Technician / Infrared Thermographer
I am looking for a job as a wireline technician.
Seeking a long-term position in the field of Information Technology or Consulting where I can learn and grow in a fast paced and rewarding environment.
I worked in the oil industry in Venezuela for the last 5 years, facing constant challenges. I worked in Accounts Payable as a Finance Coordinator and in Procurement positions.
Working Experience with CADCENTERS PDMS and INTERGRAPHS PDS-3D in various aspects of Basic and Detail Engineering including Project Planning and Implementation right from Development of Plot Plan, Equipment Layout, Piping Layout, to Isometrics, Design Review and Material Take off.
I am now looking to apply my many skills in a pipe drafting position. And along with my drafting and field experience I am confident that my newly obtained skills in assisting fabrication coordination of this project will be of great use in the design phase of all future projects.
Landman 8 years, Texas & Oklahoma, Title, Leasing & Purchasing
I am Engineer, MBA, Speak 4 languages, Excellent Computer Knowledge, I have done several courses in the Petroleum Industry. I've worked in a Shell Petroleum Refinery in the Engineering Area, Inspection, Maintenance, and Projects. Also in Economy of the Refinery working on the MIS and KPIs.
Experienced Project Manager/Engineer
Stakeholders Mgt, Social Impact assesmment, Negotiation skill, Participatory devt Planning, Monitoring/Evaluation, Team Player (B.Sc. M.Sc, Ph.D)
I have 6 years experience in multidiscipline oil-gas companies with every stage of drilling , completion and workover operations as planning , supervision , technical services , logistic , maintenance.
I am presently employed as a Builders Labourer and my duties include scaffolding, and steel fixing. As a Self Employed Diver I undertook mooring installations and sea bed surveys. I have previously worked offshore as a Production Mechanic.
I am a Petroleum Engineer that possesses technical expertise in petroleum economics evaluation, and reservoir engineering analysis with some reserves booking experience. In addition, I am very eloquent with Microsoft's office software and all windows environments.
Cuban Petroleum Engineer looking for work.
x-steel modeller & detailer
Electrician/Electrical Engineer. Naval, weapans etc
I hold a valid clean, class 3 drivers license with an air brake (Q) endorsement. I am hardworking, dependable and i am willing to relocate if need be.
Bilingual in Spanish and English , Prior CPR, 1ST AID and EMT-BASIC Training , Prior military service. Forklift Operator experience and Overhead shop crane Operator experience . Strong team member player skills and good work ethic. Valid TWIC Card issued by US TSA that expires 22 APRIL 2014 .
Solid management experience in professional Procurement (purchasing, quality control and logistics)
Moniitoring and implementation of all related painting/coating/lining works involved in the construction packages managed under co project department.this also includes the major painting works associated with the major overhauling of crude oil storage tanks in oil and gas co under control environm
I am a chemical engineer with 15 year experienced in oil, gas processing and petrochemical plants (Polyethylene-LLDPE/HDPE/LDPE). Extensive experience in gas separation, purification, refrigeration, all type of compressors. Day to day activities of production plant and catalyst manufacturing.
I am an experienced professional with excellent communication and interpersonal skills, persuasive ability and sound understanding of business conceptsand issues related to Business Administration, Sales, Marketing and General Administration;
Electrical Technician/Cell Phone Technician
Experience, professionalism, skills, physically fit, able to work long hours in tough environment and stressful conditions, availability for traveling abroad.
Project Management
Electrical Engineer - Design and Estimation
Trouble-shooting of instrument like GC and HPLC analysis of raw, intermidiate and finish goods
Procurement, Supply Chain and Contracts Professional
Country/Sales Manager Africa
Passed diploma in first class with 64% of marks.
Seeking position as HSE/Training/Emergency Management for Petrochemicals or Refinery Operations
Building electrical assistant, Mechanical Engineering Technician Diploma
Oil and Gas Drilling Professional
Inspection of Oil & Gas, Refinery, Petrochemical plant and offshore field Static equipments, Welding, piping, pipelines, painting& coating and NDT.
I am a CAD user and most experience in designing sheet metals. I can use Autocad and Solidworks as a tool in designing. Some other softwares that I am familiar with are CATIA, Unigraphics and I-deas. I am also familiar with the use of Photoshop and Photomatix.
Demin plant chemist/operator
As a renewable energy engineer who mainly focuses on biomass energy, gaining any experiences from this field would be very important to me.
Transformational Human Resources Manager with strong business orientation and multi-site experience in a broad range of HR Generalist functions including recruiting, staffing, talent development, HRIS, organizational development, staff management, and many others.
First   Prev   151   152   [ 153 ]   154   155   156   157   158   159   160   161   162   163   164   165   166   167   168   169   170   171   172   173   174   175   176   177   178   179   180   181   182   183   184   185   186   187   188   189   190   191   192   193   194   195   196   197   198   199   200   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com