Resume - Project / Commissioning Manager (Bachelors Degree / Professional Registrations)

Misco Jobs

Resume #77218

CONTACT INFORMATION:
View contact information...

EDUCATION

Higher: 1966-68 Constantine College, Middlesbrough / West Middlesbrough College of FE
Technical: 1971-72 1. Cleveland Technical College
2. Longlands Technical College
Degree: 1972-74 B. Sc., (Hons.) Chemical Engineering: Newcastle University

Languages: English – Mother tongue / French – Good working knowledge
Computers: Fully computer literate: all applications in Microsoft Office Pro Suite

Memberships:
Union Internationale des Ingénieurs Professionnels IngPEur 1010
Society of Professional Engineers PEng. A8869
Institution of Diagnostic Engineers 9426
Energy Institute (Institute of Petroleum) 11220
Chartered Management Institute 434566
Institute of Risk Management M83
Society of Petroleum Engineers (AIME) 0908472
American Institute of Chemical Engineers 0090022101
Association Française des Techniciens du Pétrole 36026
Société Nationale des Ingénieurs Professionnels de France 02004

KEY SKILLS SUMMARY

- Licensed Chemical Engineer in Europe with U.I.D.I.P. Registration No.1010 (Designation IngPEur.).
- Holder of Licence d'Ingenieur Professionnel (Chimie) in France (No. 2146).
- Registered Professional Engineer in UK with Registration No. A / 8869 (Designation PEng.).
- Bachelor of Science (Honours) Degree in Chemical Engineering, Newcastle University, July 1974.
- Worldwide experience in Construction and Project Engineering Management of major oil and gas projects: UK, Europe and Norway, North and West Africa, Middle Eastern Gulf region (Qatar, UAE, KSA, Iran), Indonesia, Philippines.
- GTL (Gas-To-Liquids) plants, LNG / LPG plants / terminals / tank farms, refineries, oil and gas processing units, olefins units (LDPE / HDPE / ethylene / 1-hexene plants), CO / CO2 plants, water injection / HP gas injection systems. Utilities / offsites systems, power generation and boiler systems, gas turbines / generators. Offshore topsides / FPSOs.
- Construction / CDM, SIMOPs, interface management, mechanical completion, pre-commissioning, commissioning, start-up and handover (TOSTR, WinPCS), performance guarantee and operational test runs, plant operations, OJT and classroom training, document management and control, Management of Change, FSI / Flawless Start-Up Initiative.
- Preparation of bid packages. Business development in UK, Europe, and the UAE.
- Experienced Technical Author: Operating & Maintenance Manuals, Commissioning / Start-Up Procedures & Instructions, Process Safety & Loss Prevention, HAZOPs / QRA Studies. Qualified (by BSi examination) ISO 9001 Internal Auditor. Environmental Assessments prepared to specifications of World Bank Operational Directive 4.01.
- Member of various SPE TIGs: HSE, Offshore Operations, Gas Technology, Production Systems & Facilities.
- Listed in the UK Energy Institute online Consultants List.
- European Representative to the American Petroleum Institute (API) 1997 – 1998 (for Bechtel).
- Professional / Personal References available.
- Profiled by American Institute of Chemical Engineers for CEP magazine September 2002.

1998 – 2008: YORKSHIRE ENGINEERING SYSTEMS, NORTHALLERTON, UNITED KINGDOM (see below)

Assignment List below (UK / Europe, North Africa, India, and Middle East) including URL links to internet references:

- 2008: Commissioning Manager / FSI Coordinator: Simon Carves Ltd (Punj Lloyd Group) in UK. Working on three separate EPC new-build 300 kta Low Density PolyEthylene (LDPE) projects (1) Management of Pre-Commissioning / Handover / Flawless – FSI / Plant Readiness Programme activities at the Polyolefins Complex in Al-Jubail, Saudi Arabia for Saudi Kayan – SABIC (2) Preparation of Operational and Testing Procedures for the Bandar Imam facility in Iran for Amir Kabir Petroleum Company (3) Preparation of an Operating Manual for the PTT PE facility in Thailand. Links below:
http://www.simoncarves.com/admin/spaw2/uploads/files/4025C%20Saudi%20Kayan%20Press%20Release%20r4.pdf http://www.processengineering.co.uk/Articles/297172/Simon+Carves+nets+Thai+LDPE+project.htm http://www.nipc.net/npcnews/news63-64/projects.htm

- 2006/08: FSI (Flawless Start-Up Initiative) Coordinator – Europe: M W Kellogg Ltd in UK / Europe. Coordination of FSI Team for the Pearl GTL (Gas-To-Liquids) Project on US$15bn development of GTL process plant / utilities for Qatar Shell at Ras Laffan, Qatar. Responsible for liaison with European engineering sub-contractors (Linde, Saipem, Honeywell, CB&I, Page-Europa) for roll-out and implementation of FSI. http://www.shell-me.com/english/oct04/profiles3.htm

- 2005: Commissioning Manager: Snamprogetti Ltd. Commissioning of Phase 1 of Mobin Utilities Complex on site at Bandar Assaluyeh, Iran. US$4.6bn project for utilities plants including: combined heat & power plant (oil/gas turbine-generators with heat recovery steam generators), seawater intake & cooling water distribution network, desalination / potable water plant, waste water treatment plant, waste incineration unit, O2 / N2 air separation and compressed air plant, supplying the new olefins, aromatics, methanol, C2 recovery, and ammonia / urea complexes in Assaluyeh Industrial Area. http://www.iraninternationalmagazine.com/Issue_35-sp/text/petrochemical%20industry.htm

- 2004/05: Project Commissioning Manager: Grain LNG Ltd. Construction, commissioning / SIMOPs of LNG Import Terminal in Kent, UK. £150M conversion of existing National Grid–Transco peak-shave plant to a terminal handling LNG tankers of 70,000m³ – 205,000m³ capacity. Construction of four 50,000m³ LNG storage tanks, with a new jetty and two 4.7 km pipelines (36″ / 14″), electric-drive cryogenic suction reciprocating compressors to handle 73 tonnes / hr boil-off gas during ship unloading. Terminal opened July 2005 with arrival of "Berge Arzew" 138,000m³ LNG carrier from Algeria. http://www.nationalgrid.com/uk/GrainLNG/MediaInfo/PressReleases/lngoperational.htm

- 2003/04: Project Commissioning Lead: Tractebel Gas Engineering. Based in Brussels, Belgium for construction and commissioning planning phases of Snøhvit / Hammerfest LNG / LPG Tank Terminal Project for Statoil on Melkøya island in northern Norway. Construction of two 120,000m³ LNG tanks, a single 45,000m³ LPG tank, plus a single 75,000m³ condensate / light oil storage tank. http://www.hydrocarbons-technology.com/projects/snohvit

- 2003: Project / Commissioning Manager: Entrepose Contracting SA, Paris, France on 3-month site assignment for commissioning / SIMOPs of oil / gas production and water injection systems at Menzel Lejmat Block (MLN Field) 405a site, Berkine Basin, Sahara Desert, Algeria (Burlington Resources). http://www.mbendi.co.za/indy/oilg/ogus/af/al/p0005.htm

- 2003: Project Engineer: SaiBOS Services. Based in Guyancourt, Paris, France, and working with Bid Team on preparation of Technical Bid Proposal Packages for Block 17 Rosa-Lirio Project offshore Angola on behalf of clients TotalFinaElf. http://www.ogj.com/articles/save_screen.cfm?ARTICLE_ID=42734

- 2001/03: Commissioning & Start-Up Manager: Phillips Petroleum. On site at the Qatar Chemical Company (Q-Chem) integrated Olefins Complex, Messaieed, State of Qatar. EPCC Project US$1.2bn for engineering, construction, commissioning, start-up and plant performance runs. Products: 500 kta Ethylene, Linear Polyethylene from two 462 kta trains and 47 kta of 1-Hexene from ethane-rich gas feedstock. http://www.qchem.com.qa/internet/company_overview.asp

- 2000/01: Project Engineer: TotalFinaElf S.A. Based in Paris office on the Total South Pars Project, Assaluyeh, Iran. US$2bn project. New onshore gas plant / two offshore wellhead platforms for Phases 2 & 3 of the South Pars field. Preparation of Operating, Maintenance, Inspection, and Logistics Policy Documents, Plant / Platform Operating Procedures (POPs). http://www.total.com/en/press/press_releases/pr_2002/020311_Iran_s_Offshore_1251.htm

- 1999: Commissioning Manager: Preussag Noell Group / Whessoe LGA for start-up / SIMOPs of new 26,000m³ LPG storage tank and Cryogenic Unit on site at Reliance Petroleum Refinery in Jamnagar, Gujarat, India. Tankage and export of commercial LPG to ship-loading facilities and Marine Tank Farm. http://www.whessoe.co.uk (follow link to LPG Projects)

- 1999: Commissioning Manager: Snamprogetti on Ruwais Refinery Expansion Project on site in UAE. US$500M EPC contract for Abu Dhabi National Oil Co. (ADNOC) to upgrade existing refinery hydrocracker / hydroskimmer facilities with new 2-train 140,000 bpd condensate processing unit. Set-up of Permit To Work (PTW) system. Resolving interface issues between client and construction teams. http://www.hydrocarbons-technology.com/projects/ruwais

- 1998/99: Senior Commissioning Engineer / Deputy Commissioning Manager: BOC Process Plants, Guildford, UK on site at the Hickson + Welch plant in Castleford. Construction, commissioning, and start-up / SIMOPs of new 100 kg / hr carbon monoxide separation plant. Work included preparation of OJT / classroom training exercises for H+W operations and engineering personnel. www.icis.com/Articles/1996/01/10/3945/h38w-and-boc-to-build-new-plant.html

1997 – 1998: BECHTEL INTERNATIONAL, SAN FRANCISCO, USA

- 1998: Start-Up Optimisation Manager on site at Tengiz in west Kazakhstan. KTL-2.3 (Train 5) Expansion Project for client Chevron-Tengizchevroil (TCO). Sour crude oil and gas processing plant. Responsible for establishing guidelines and schedules for Construction Handover, Mechanical Completion, Pre-Commissioning / SIMOPs Plans, Commissioning Strategies, Start-Up Coordination, Interface Planning: http://www.hydrocarbons-technology.com/projects/tengiz

- 1997: Project Completions Manager working on GL1.Z Renovation Project on site at the Sonatrach LNG plant, Arzew, Algeria. Management of Engineering Group (multi-national multi-discipline Integrated Team Task Force) for close-out / QA / client-contractor interface issue resolution on a major LNG plant revamp. Staff Manager on one year foreign assignment. http://www.accessmylibrary.com/coms2/summary_0286-10618456_ITM

1990 – 1996: TECHNICAL AUTHORSHIP + GRAPHICS LIMITED, MIDDLESBROUGH, UNITED KINGDOM

- 1996: Regional Manager: Sigma Enterprises, Abu Dhabi, UAE. Set up new Oil, Gas, and Maritime (OG+M) Divisional office from a green-field site. Initial OG+M business development with clients including local oil and gas operating companies, ADNOC, ADCO, ADMA, GASCO, and ADGAS. Preparation of Bid Proposals.

- 1996: Senior Process Engineer: MiTECH International seconded to BP. Pilot Trial Study of installed Condition Monitoring System (CMS) at Sullom Voe Terminal, Shetlands. Advised BP on staff training requirements for CMS and associated activities including conducting an Equipment Criticality Review to establish Condition Based Maintenance (CBM) and Reliability Centred Maintenance (RCM) requirements. Prepared Final Report for BP Board of Directors.

- 1995: Senior Process Engineer / Technical Author: Ralph M Parsons (London) seconded from the Gordon Gill Company (Brussels). Process philosophies, commissioning procedures, operating manuals, HAZOPs, EDMS documentation for new LNG project on Teesside, UK – Amoco CATS (Central Area Transmission System) Terminal.

- 1994: Senior Commissioning Engineer: Brown & Root, Aberdeen. Shell Central Projects Group for Gannet, Auk, Fulmar and Kittiwake platforms. Operating Studies, Commissioning TestPacks, HAZOPs / Safety Case work, POPMs. Estimating / preparing CTRs for Change Proposals. Commissioning input to Bid Packages.

- 1993: Senior Mechanical Engineer: DNV / Elf Norge, Stavanger, Norway. Mechanical Completion and Commissioning Procedures for Frigg Area Development / Frøy Integration Projects TCP2 platform.

- 1993: Senior Mechanical Engineer: Statoil / HMV in Risøy Island Office, Haugesund, Norway. Producing piping TestPacks for 16/11S offshore gas platform extensions as part of Europipe Development Project.

- 1992: Senior Project Engineer: Genesis Engineering, Rotterdam, Netherlands. Operating Procedures / Process Philosophy for Lasmo J6A North Sea platform. Study for Sub-Mudline Protection Silos for Volker Stevin Offshore.

- 1992: Project Operations Engineer: Zeetech Engineering, Zoetermeer, Netherlands. Preparation of Process Operating Manuals for NOGAT pipeline, L2, L5, F15, F3, and L15 platforms for Shell-NAM and Elf Petroland.

- 1991: Commissioning Engineer / Technical Author: John Brown Engineers & Constructors (Europe), Zoetermeer, Netherlands. Commissioning Manual for Elf Petroland F15A platform topsides and Project Commissioning Study for John Brown bid package for Shell-NAM AWG1-C compressor platform project.

- 1990: Project Engineer / Technical Author: Total Oil Marine, Aberdeen, UK. Revision of Operating Procedures and Operating Manuals for Alwyn North "A" and "B" offshore platforms in UK North Sea.

Petrojam, Kingston, Jamaica
COMMISSIONING MANAGER

1988 – 1989: Commissioning Manger at Petrojam Refinery with team of 9 national engineers for start-up of a 41.8m US gallons per year dehydration plant to convert ethanol feedstock (hydrous alcohol) to fuel ethanol (anhydrous alcohol) for US market.

Compagnie Françaises des Pétroles (TOTAL), Paris, France
AGENT MAITRISE ET TECHNICIEN

1982 – 1988: Initially based in Paris and then assigned to Zakum Development Company (ZADCO), Abu Dhabi, UAE. Senior Offshore Commissioning Engineer running team of technical writers / draughtsmen to produce Operating Manuals / P+IDs. Start-up of Upper Zakum Central Complex offshore platform, wellheads / satellite platforms, utilities / gas treatment plants.

Terminal Installations Inc., Marly, Switzerland (part of SBM, Monaco)
COMMISSIONING ENGINEER

1981: Construction, tow-out, hook-up, and start-up of SBM's first FPSO. Based at Keppel Shipyard / Dry-Dock in Singapore for conversion of former VLCC to FPSO. Tow-out to Cadlao offshore oilfield, Palawan Island, Philippines. Worked with McDermott Inc for hook-up to PLEM / SPM and later with Flopetrol to install permanent downhole monitoring systems. Prepared original Start-Up / Operating Instructions and set-up training courses for local operations staff.

Creole Production Services International, Houston, Texas
PLATFORM SUPERINTENDENT / OIM

1980 – 1981: Asabo GIP (gas injection platform) for Mobil Producing Nigeria. Offshore oil / gas production platform supplying onshore Quai Iboe Terminal. Operation of I-H Solar "Saturn" and "Centaur" gas turbine sets, Ingersoll-Rand V12 reciprocating gas injection compressors. Operation of remote unmanned satellite wellhead production platforms.

Abu Dhabi Petroleum Company (later ADCO), United Arab Emirates
FIELDS SUPERVISOR

1978 – 1980: Desert oil / gas fields with HP water injection facilities at Asab, Sahil and Shah oilfields. Commissioning of new upgrade to power generation systems with installation of 2 Rolls-Royce "Avon" units. Final position as Liaison Engineer between ADCO-GASCO companies on new NGL plant tie-in work to existing oil and gas production plant.

Arabian American Oil Company (ARAMCO), The Hague, Netherlands
SENIOR MECHANICAL ENGINEER

1977 – 1978: Working on Ghawar onshore oilfield; extensive network of high pressure gas lift and water injection and water treatment stations for oil reservoir pressure maintenance operations. Systems included; GEC Frame V gas turbines, Ingersoll-Rand compressor sets, Amine gas dehydration and treatment plant.

Union Oil of Indonesia (UNOCAL), Balikpapan, Indonesia
COMMISSIONING ENGINEER

1976 – 1977: Foreign assignment on Borneo Island, East Kalimantan; working with Fluor engineering / start-up team to pre-commission, commission and start-up new LEX (liquid extraction) plant at Santan Marine Terminal. York turbo-expander, I-H Solar gas turbines (Saturn and Centaur units). Prepared original drafts of "LEXOP" Operating Instructions.

Esso Standard Libya Inc., Tripoli, Libya
PRODUCTION SUPERVISOR

1974 – 1975: at LNG plant, Marsa-el-Brega; 2-train gas TD&F (treating, drying, and fractionation) units. Commissioning and start-up of additional steam-driven turbines.
1975 – 1976: transferred to Sahara desert location at Zelten; gas dehydration and compression station, pipeline and sphering operations, condensate recovery and injection units. OJT / classroom training of local operations personnel.

Imperial Chemical Industries (ICI), Wilton Site, Teesside, UK
SHIFT ENGINEER

1969 – 1974: Combined industry and laboratory work with college / university studies (sponsored by ICI) in Chemical and Process Engineering; practical work on sites including adipic acid, nylon 6:6 salt, methanol, ethylene, polypropylene units.

DETAILED PROFESSIONAL MEMBERSHIPS LIST (at December 2008)

Europe Union Internationale des Ingénieurs Professionnels IngPEur / 1010 PE Licence 12 / 97

UK Society of Professional Engineers PEng / A8869 Member 07 / 96

UK Institution of Diagnostic Engineers FIDiagE / 9426 Fellow 11 / 94

UK Energy Institute MEI / 11220 Member 02 / 94

UK Chartered Management Institute MCMI / 434566 Member 06 / 95

UK Institute of Risk Management MIRM / M83 Member 05 / 94

USA Society of Petroleum Engineers (AIME) SPE / 090847-2 Member 03 / 83

USA American Institute of Chemical Engineers SMAIChE / 0090022101 Senior Member 04 / 95

France Association Française des Techniciens du Pétrole MAFTTP / 36026 Membre 03 / 87

France Société Nationale des Ingénieurs Professionnels de France 2146 Membre Associe 01 / 01

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 451 to 500 of 10903)

Go to Search Parameters...

Brief Description

Reservoir Geologist  To perform characterization Reservoir integrated Studies and reservoir Modeling. Generation and evaluation Geological Prospects and development opportunities. Elaborate Exploitation Plans. Planning (targets) and monitor of Special Wells. Volumetric reserve estimations.

Seeking senior level assignments in Plant Operations, Project Management, Operations & Maintenance and Installation & Commissioning with a reputed organization.

Primavera, MS Project, MS Office, EVMS, Planning

Versatile technology professional with expertise as a Senior Reservoir Engineer and Operations Business Manager. Resourceful problem solver who performs well under pressure. Outstanding leadership, organizational, and communication skills. Granted Top Secret Security Clearance. Analytical.

More than 13 years of multi-international reservoir engineering experiences in gas and oil developments from sandstone and carbonate in land fields and offshore,including different stages of appraisal and development planning & management, well test, reservoir characterization & simulation, economic

SmartPlant 3D/P&ID Application support

I wish to apply for suitable position in the highly motivated & challenging environment. I am having 21 year of experience in different fields of Gas, Petroleum and Chemical industries. Also involved actively involved as an engineering material coordinator. I am having experience in identifying

More than 20 years experienced in project design services which involved mechanical and piping design preparation of conceptual design packages and detailed design packages, specification of pipes, fittings, valves and other specialties. Developed specifications for pumps, steam turbines, tanks, pre

Working as a field operator now. Worked as a pre-commissioning, commisiioning operator and as a chemist also.Pre-commissioning, commissioning activities, start up and shut down activities also.

Project / Commissioning Manager (Bachelors Degree / Professional Registrations)

Have more than thirteen years of experiance in log interpretation

A total of 15 years of professional work experience, (9) years in the Gulf region, of which seven years Were in the oil/gas, petrochemical, power/desalination plant and building construction projects. A Computer literate and proficient in oral and writing English communication skills.

Senior Financial Analyst with a background in IT and Finance. I have experience in JDE world, JDE one world and SAP System Accounting software. I have enhanced my knowledge in SAP, being involved with the system conversion from JDE to SAP at UFA from July 2006 to August 2008.

Experienced exploration/wellsite geologist

Geophysicist position in a oil-field services company. I have more than 18 years of seismic data processing and data management experiences.

Welding Inspector, CSWIP 3.2, ASNT-II Certified, 18 Years working experience in Oil and Gas Industries in various countries.

Has 20 Years Expeierence in various aspect of Control and Automation and last 7 years in Middle East with ABB /Invensys. Has done large projects and several latest DCS/ESD systems such as Triconex,ABB infi90 , Foxboro I/A , Honeywell TDC3000 etc

I am qualified Degree chemical Engineer from the reputed Maharaja Sayaji Rao Uni, Vadodara

I’ve total of Eighteen (18) years experience in the area of Pipeline design and Piping design for oil & gas and petrochemical projects.

Over 30 years and broad range of experience in oil and gas exploration. Bachelor degree Geophysics/ Geology and MSc degree in Geophysics. Worked in most aspects of exploration, such as seismic survey planning, acquisition, data processing, interpretation, AVO, seismic attributesand seismic inversion

M. Sc. & B. Sc. in Computer Science, USA. Detailed knowledge and practical experiences in general maangement, performance management, Balanced Scorecard, and project Management. Having solid background in IT and business communication.

Expertise in gas sweetening, gas compression, gasification process, and U&O facilities.

Over 16 years experience as Electrical Engineer

I have been a Process Engineer for 16 years. My experience includes process design of oil, gas and petrochemical plants and steam and power generation units, expertise in conceptual design, basic design, FEED and detailed engineering, experienced also in optimization and troubleshooting projects.

Over 20 years experience in chemical, petrochemical and oil&gas industry.

B.Sc. Chemistry degree and having 25 years experience in petrochemicals and refinery in process department

Presently working as Sr APC & Opt Engineer in Qatar Petroleum Refinery. A total of 20 years experience in Petroleum Refinery industry (8 years in APC & Opt, 5 years in Technical Services and 7 years in Operations).

I have extensive experience in Oil&Gas industry and EPC, I have extensive experiencey in Rotating Equipments Design and I worked in a refinery in Egypt as the Head of the Rotating equipments for 14 years.

Having achieved many goals in my long career how MECHANICAL ENGINEER, I am interested in continuing my professional horizons by working as a FLEXURAL STRESS AND MECHANICAL PIPING DESIGN AND LEADING MECHANICAL ENGINEERING PROJECT for your respectable company.

To support and promote a positive safety culture.

Procurement/Purchase/Buyer Experience in SAP R/3

To provide technical expertise of piping, mechanical engineering for Oil & Gas, Petrochemical, Power plant. Support to projects management, Supply division and projects controls through all phases of major and minor projects

Process Design Engineer with experience o fEPC contracts in Saudi Arabia. I also have expereince in operating plants, providing plant support. I am currently working as Technical Manager of 20 process engineers, doing small projects execution for Sasol Infrachem Utilities.

Seismic interpreter and reservoir geophyscist with experience in reservoir modeling, geostatistics and rock physics

An experienced Control & Instrumentation Engineer with extensive achievements in leading, designing, executing, and organizing project activities for process industries, e.g. oil/gas refineries, chemical/petrochemical complexes, Power plants, steel and copper industries.

Contract management Specialist

Accomplished PLC, HMI, automation, programmable controls specialist

A Production Engineer with over 25 years of oil and gas field experience in domestic and international operations. Solid record in building project teams in multidiscipline and multilingual work groups. Strengths include planning, organization, and communication.

15 years of experience in PDP/FEED/Detailed Engineering and Construction support in Petrochemical/Chemical industry. Extensive experience with Pressure Vessels (ASME Boiler and Pressure Vessel Code: Sec. VIII, Div. 1/2), Piping (B31.1/31.3), Above Ground Storage Tanks (API 620/API 650)

Chemical process/project engineer, small projects manager

operation manager

I have a wide variety of experience in the field of heavy equipment management (maintenance, operations & repairs) in construction, petrochemicals, transportation, logistics and other related field.

Biofuel / biodiesel technologist ( oil & fat technology)

Exploration, Operations, Management, Biostratigraphy, Sequence stratigraphy, Sedimentology, Basin Analysis, Clastic, Carbonate, Seismic, Geochemical, Geophysical

Job Responsibility: Quality Control laboratory which involves in testing of crude oil, produced water, produced gas, potable water & Scales using ASTM, API, APHA methods. Injection Water Quality checks for Particle count (Coulter Counter), Dissolved oxygen (Orbisphere meter), Free Chlorine, Corrosi

SENIOR E & I ENGINEER (EPC Project Management - Construction & Commissioning / QS / Contracts Administration / Procurements / Recruitment ¡V field of Electrical & Instrumentation, partly Mechanical & Civil)

Over 15 years working experience in private sectors and International Organization as Executive Secretary to expatriates, Human Resources Officer, Procurement Officer, Interpreter/Translator and Project Assistant.

I have fourteen (14) years post qualification experience: with about ten (10) years experience working on International Projects (in the Oil and Gas/Energy industry), working as a Management Consultant providing high-end business value consulting services and solutions.

Lokking for a Inspector Job

MS degrees in Management and IT, a member of Canadian Council of Information Technology Professional (CCITP) , more than 10 years of experience working as SME-EPM,Head of IS, MIS Specialist, in-depth knowledge of Project Management, BPR, Quality Management with good problem solving and people skills

First 1 2 3 4 5 6 7 8 9 [ 10 ] 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out