Resume - Am instrumentation Engineer with 1 yr Exp in UAE.I am interested in service engi...

Misco Jobs

Resume #77423

CONTACT INFORMATION:
View contact information...

Personal Data

Date of Birth: 23-10-1985
Age: 24
Sex: Male
Nationality: Indian
Marital Status: Single

Holder of valid UAE (GCC), Indian Driving License.

Holder of Valid Indian Passport ¡V valid till 2014.

Fluent Languages

English, Hindi and Malayalam
Language Comfortable

Tamil
AMBU THOMAS
PROFESSIONAL QUALIFICATION:(INSTRUMENTATION ENGINEER)
„« B-Tech in Electronics and Instrumentation (Instrumentation Engineering) from Federal Institute of Science And Technology (FISAT), Mahatma Gandhi University,Kerala,INDIA (June 2007).
„« Distributed Control System (DCS) and Programmable Logic Controllers (PLC) Certified training from YOKOGAWA India Ltd.
PRESENT STATUS & EXPERIENCE( 1 Year ):
„« Working as a Junior Engineer at Abu Dhabi Oilfield Services (ADOS)-Abu Dhabi, UAE in FARRIS Safety Relief Valve, FISHER Control Valves, Spares & Regulators division.
„« Worked as a Trainee Instrumentation Engineer at Fertilizers And Chemicals Travancore Ltd.(FACT) Kerala-INDIA, during Shut Down period in Petrochemical Division.
NATURE OF WORK:
Working as a Junior Engineer, my responsibilities are
„« Sizing Calculation & Selection of Relief valves, Control valves & Regulators.
„« Provide technical guidance, Clarification for technical quires, advice design changes for construction, commissioning, operation, review of P&ID, engineering for oil & gas production and EPC facilities.
„« Preparation of Data Sheet as per specification and Standards for Valves, Detailed instrument design on valves, Bill of material, GA Drawings, Recommended Spare parts list, ITP (QA/QC) and various check lists.
„« To carry out inspection at various stages of FAT. These stage include various functional test, Pop test, Hydro test, Seat leak test. etc.
„« Preparation of Technical & Commercial bid for evaluation.
„« Knowledge in international standards & recommended practice used in Oil & Gas industry.
„« Knowledge in DCS, PLC, P&ID diagram, Instrument diagram, Trouble shooting of control valve.

Worked as Trainee Instrumentation Engineer for a period of 6 months in FACT (Petro Chemical Division) during Shutdown Period.
* Responsible for all control and Instrument System Maintenance activities like troubleshooting, calibration testing and effective utilization of material in day to day preventive Maintenance and shutdown Maintenance etc for ensuring continuous reliable and efficient operation of all control and instrument system in the plant. Scheduling and execution of daily and monthly plant calibration and inspection of different instruments.

Achievements
„X Best performance in ADOS.
„X Won prizes in district level.
„X Best Football player in the year 2002.
„X Member of football team in school and college.
„X Representative in School and College.

Hobbies

„X Riding
„X Music listening
„X People Networking

EDUCATIONAL QUALIFICATION:
* Bachelor Degree in Electronics & Instrumentation Engineering (2003-2007) from Federal institute of science & Technology affiliated by Mahatma Gandhi University with 66%.
* Intermediate (Plus 2) in science from Nava Nirman Public School (CBSE) with 64%.
* SSLC (10th) from Mary Matha School (State Board) with 74%.
OBJECTIVE:
To be associated with a progressive organization that gives scope to learn and constantly improve my knowledge and skills, and to be the part of a team that dynamically works towards the growth of the organization
PROFILE:
„« Enough energy & poise to carry large work load consistently.
„« Good inter personal communication skills.
„« Comprehensive problem solving abilities.
„« Ability to adapt to changes.
COMPUTER LITERACY:
„« Working knowledge in
* Windows 98, Windows XP
* MS Office and other related software
* Programming in C,C++
TECHNICAL TOOLS:
„« Lab view
„« Matlab
„« DCS(CENTUM 3000/1000)
„« PLC

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8801 to 8850 of 10849)

Go to Search Parameters...

Brief Description

I am looking for an entry level job in the oil and gas industry. I will graduate with a B.S. in Geology from Kansas State University in May, and will be ready for employment at the end of June.

I am working as a Member of a petrochemicals company of much repute at Haldia, India for the last 4 years. Prior to that I had been working with Coates India Ltd, a chemical company based at Calcutta. I have total 6years experience in the field altogether.

I am working with Engro Chemical Pakistan Ltd., since start of 1999, as a Chemical Plant Operator at Urea Unit, and wish to join else where in the world.

branch=EEE fresher location=anywhere

Seeking possible internship/future employment

Recently graduated Petroleum Engineer from the University of MO-Rolla, seeking full time employment in the United States.

I have my IWCF DRILLER CERTIFICATE valid up to 2003. I am very much interested in joining the challenging offshore/onshore industry as an entry-level person.

I have completed Bachelor of Sciences in Mining Engineering. I want to start my career in Oil and Gas field. I am enclosing my CV. Subjects which I have studied in four years program are mentioned in CV. If you have any challenging job or post of trainee or apprentice, please do call.

Petroleum Geologist who has graduated in 1993 from Gadjah Mada University, Indonesia. Still reading several books about drilling, subsurface pressure and seismic stratigraphy until now. I learned Landmark's softwares like Seisworks and Stratsworks.

More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.

Mechanical Engineer, Project Engineer and Project Management Services

Safety, Environment, Industrial Hygiene, Loss Prevention, Security Program Management

I’m a good communicator who is able to work in a team and can handle pressure. . I am also willing to relocate, work over-time, after hours or/and be on stand-by if and when necessary.

Am instrumentation Engineer with 1 yr Exp in UAE.I am interested in service engineering or Operation side job

Inspection of piping.pipelines,offshore structures,welders qualification,pqr,internal audits,quality plans review,test packs review.

Project Management, Senior Mechanical Engineer, Mechanical & Piping Supervisor, Design Engineer

10 Years in Electrical, Instrumentation & Cathodic Protection. Specially in Erection, testing, calibration of instruments, loop checking, sequence checking, pre-commissioning, Commissioning, Design verification, QA/QC, Project management, Billing and handing over of various projects like EHV Sub-St

Exploration Geologist

An experienced engineering manager, project manager, and program manager with Department and Division operations experience at engineering and construction, and consulting firms. Experience in multi-disciplinary infrastructure projects and environmental remediation.

Planning Engineer, BS Industrial Technology, SAP PM Module Expert, Primavera P3/3e Hands on Experience.

HSE Specialist

Proficient with Leica RTK GPS, Total Stations & survey specific computer programs; Microsurvey, Autodesk Land Desktop, Leica Geo Office & Excel. Experienced pipe line & fibre optic locator.

Safety Officer/Adviser. Cert IV OHS level, Cert IV Training & Assesment. Qld WHSO accredited. 5 years experience - resource, retail industries. Hands on proactive professional to facilitate Safety /Environmental/Risk Management plans/systems to Australian Standards.

Free! Worked as a roughneck for Nabors Drilling USA and had the opporunity to go Directional for Baker Hughes INTEQ where I had been employed as a DD IV until just recently. Was laid off due to lack of work and would really like to get back to work ASAP. I am very responsible and hard working.

Lead Mechanical Piping Engineer Gas and Power Plant site office testpack hydrotest pipe support punch list

Six years of experience in execution of maritime jobs like Construction of Rubble mound breakwater (for Naval Base & LNG Project ) Jetty ( Ethylene Terminal & LNG project) and Berths ( for LNG loading )

Production Manager, Process Engineer, Project Engineer, Metallurgist

Ten years experience in design, construction, water, wastewater treatment plants, buildings, roads, Certified in Occupational Health and Safety Canada, AutoCAD, B.E. Civil, and ME Environmental (Public Health) Engineering, Valid Ontario class G drivers license, Water Treatment Plant, Water Distri

-Installation the Network’s and maintenance,Interface Between systems, Corrective and Preventive Actions of Hardware and Software, Adviser in applications Maquila Systems, Customer service Maquila’s Systems. wireless communications, two way Radios,

i'm 26years old, i hold a B.ENG Degree in Petroleum Engineering from university Portharcourt, with 2 years in petroleum production operation with shell petroleum. Beside my experience i need a company who can employ me IN ANY kind of petroleum engineering JOB.

Dynamic leader and team builder, consistently motivating others toward success.

Seeking an analyst position. Highly innovative graduated offering more than 2 years in business and credit analyst experience and a proven ability to go beyond expectations. Willing to travel and relocate

Five years increasing responsibility and leadership in Power Plant, Analytical Chemistry, Mechanical Operations and Maintenance. Expert in the fields of Water Sampling , Maintenance Planning, and Record Audits

I would like to introduce my self as young ,enthusiastic Mechanical Engineer working currently with M/s Hasan Juma Backet Trdg. & Contg. LLC Oman for last two years in Water & Waste Water field. I can assure you if given a chance i can come up to the expectations of my seniors.

Marine Engineer with an experience of around 5 years at sea, looking for an opening in the oil fields.

please see below

More than 4 years experience in Oil & Gas Refinery in Construction to Start-up Worked in 3 different projects with International Companies. Installation of equipment, Precommisioning & Commisioning system

Would Like To Work In O&G Organization Where In I Can Leverage My Knowledge And Thereby Add Value To The Company. Would like to work on Onshore rigs.

ROV Pilot Training, BOSIET, HUET. Offshore Medicals, STCW 95

diploma im mechanical engineering,able to handle all kinds of equipment s

Graduate in Civil Engineering and Post Graduate in Information technology. Having over 10 years of experience in Marine Civil Construction projects internationally.

Machinist,C.N.C. / Manual 20+yrs. experience

Chemical Engineer, Project and Quality-Security-Environmental Management

34 years in instrumentation industry.

Goal-driven & result-oriented Oil and Gas Engineer with a strong mechanical, pipeline, facilities & project engineering background and over five years experience in the E&P industry.

Hardworking, Dedicated, trustworthy and have the ability to work with others. Acquired Bsc in Mechanical Engineering. Reliable, Honest, responsible, work well independently and on a team. Prepared to do extra work and can work during emergencies. Single with an excellent health. I enjoy interact

11 years experience in the field of surveying and believe that my background and experience would make me a valuable asset to any organization that is looking for a hard working, trustworthy, and professional field surveyor

Heavy equipment operator,heavy mechanic,pre-employment floorhand(roughneck) training

AutoCad,Ms-Office

Qualified Geologist (Hons Applied Science) 10 years exploration experience in Soft and Hard rock Geology,( Gold and base metals) (Victoria Western Australia and Queensland experence. Also hold a Masters in Commerce Uni of NSW. Looking for a position in China as wife is from Beijing.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 [ 177 ] 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out