Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #77487 next resume »»
CONTACT INFORMATION:
View contact information...

EDUCATIONAL BACKGROUND

* S-1 degree in Petroleum Engineering, UPN "Veteran" Yogyakarta, Graduated on March, 2005
oThesis with Title "Formation Completion Evaluation on Continuous Gas Lift Well at Kakap Block Star Energy (Kakap) Ltd"
oComprehensive Paper with Title "Applying of Coiled Tubing Drilling as according to Characteristic Reservoir".

WORK EXPERIENCE

January 2008 – Present
TASK ENVIRONMENTAL SERVICES BV (The Inventive Solid Control Company, Alkmaar - Holland)
Solid Control Engineer – my responsibilities are to install, troubleshoot, maintain and operate the diverse range of equipment for the solids control and waste management market both onshore and offshore.

September 2005 – January 2008
PT. LINTAS CAKRA GONDWANA (Drilling Fluids Company, supply and Engineering Services)
Drilling Fluids Engineer – on-site day to day supervision of running drilling/completion fluids.

November 2006 – April 2007
PT. MITRAMANDALA NUSABHAKTI (Geothermal, Oil and Gas Drilling Services)
Drilling Fluids Engineer (Consultant) – on-site day to day supervision of running drilling/completion fluids.

June 2005 - September 2005
PT. JASARAYA MANDIRI (Contractor and Supply Equipment for Fuel and Gas Station)
Technical Sales Engineer - Responsible for sales activities on level of industrial control projects, follow up on project leads, maintain and develop relationships with both existing and new customers, and reports to sales manager.

TRAINING EXPERIENCE

February – March 2008
Solid Control and Waste Management Trainee, TASK Environmental Services BV, Alkmaar - Holland
* Introduce all the Solid Control Equipments (Mud Cooler, Centrifuges, Hydroclones, Shale Shaker, Screw Conveyor, Cutting Dryer, etc)and Waste Management
* Learn how to install, maintain, trouble shoot and operate of equipments for the Solid Control and How to Make a Report, like Form in Solid Control Report, Filled in Form Technical and service ticket

September – October 2006
Drilling Fluids Trainee, PT. LINTAS CAKRA GONDWANA
* Introduction of Drilling Fluids, (Water Base Mud, Oil Base Mud, Completion and Workover Fluids, Solid Control Equipment, Drilling Fluid Products)
* Clay Chemistry, (Swelling Clay, Bentonite Hydration)
* Drilling Fluids Testing Procedures and Chemical Analysis
* Drilling Fluids Contaminant and Drilling Hole Problems
* How to Make a Report, like Form in Mud Report, Filled in Form Technical, Service Order and, Filled in Form Mud Recap
* Drilling Fluid Calculations.

August 16th – October 22nd, 2004: On Job Training (OJT)
STAR ENERGY (KAKAP) LTD, Kakap Block, Offshore, Natuna Sea
* Presenter of thesis with title, "Formation completion Evaluation on Continuous Gas Lift Well (KH-05#Well)" in Jakarta and Yogyakarta
* Introducing kakap Field Production: Process of Continuous Gas lift Well, PID Process, Perforation System and FPSO Offshore Operations.

January 30th – February 27th, 2002: Field Practical Training
DEVON ENERGY LTD, Kasim Marine Terminal (KMT), Sorong, Papua
* Basic Training in Drilling and Production Operations
* Introducing Arar and Matoa Gas Plant

June 1999: Introducing Oil and Gas Field
PERTAMINA DOH Jawa Bagian Tengah, Cepu, Middle Java
* Geological and Migas Field Study
* Have basic knowledge in Drilling Operations, Production Operations and Reservoir.

2000 – 2002
PETROLEUM ENGINEERING LABORATORY, UPN "Veteran" Yogyakarta
Lab. Assistant – Responsible for conducted lab. Work Fluid reservoir, Formation Evaluation, Drilling Fluid, Drilling cementing, Drilling Equipment, Production Equipment, Well Testing, and Core Analysis for student and Company.

FIELD EXPERIENCE

In 2008

* RWE Dea North Africa/Middle East GmbH, Sirte District, NABORS#676 RIG, Directional Well Type, Exploration Well, Sahara Desert – Sirte Oil Field, Libya
* SHELL E & P Libya, Rashda District, KCA DEUTAG#T202 RIG, Sidetrack and Directional Well Type, Exploration Well, Sahara Desert - Rashda Oil Field, Libya

In 2007

* JOB Pertamina - Golden Spike Indonesia Ltd, South Sumatra, GREATWALL#RIG, Straight Hole and Directional Well Type, Exploration Well, Tamiang Field and Development Well, Air Hitam Field
* Pertamina EP Region Kawasan Timur Indonesia, East Kalimantan, XJ 650#RIG, Straight Hole Well Type, Development Well, Sangatta Field
* Pertamina EP Region Kawasan Timur Indonesia, East Kalimantan, IDECO#RIG, Straight Hole Well Type, Development Well, Sangatta Field

In 2006

* TAC Pertamina – Radiant Energi Sukatani, West Java, TMMJ#12 RIG, Sidetrack and Directional Well Type, Development Well, Sukatani Field

SEMINAR AND COURSE

* Basic Offshore Safety Induction and Emergency Training (B.O.S.I.E.T) including Helicopter Underwater emergency Training (HUET), Basic Sea Survival, Basic Life Support, and Basic Fire Awareness at PT. Global Nusantara Technical Services, Balikpapan on August 13th -14th, 2008
* H2S Basic Training Course at PT. Pandu Selamat Utama, Jakarta on February 16th, 2008
* SM IATMI Stadium General "Re-Development Of Mature Oil Field by Hari K. Oetomo (Senior Reservoir Engineering Superintendent PetroChina Bermuda Ltd) on April 29, 2005
* WORKSHOP "Underbalance Drilling" by Kennedy (Technology Development Engineer, PT. Blade Energy) on March 2005

SKILLS

* Software: Petroleum Software, Ms. Office, Ms. Visio, Photoshop, CorelDraw 12, AutoCAD
* Language: Working knowledge level for spoken, written and reading in Indonesia and English

View contact information...
«« previous resume next resume »»
Search Results (Resumes 6201 to 6250 of 10902)Go to Search Parameters...
Brief Description
MSc GEOLOGY, RESEARCH WORK IN ELECTRICAL RESISTIVITY METHOD IN GEOPHYSICS FIELD
B.E.(Chemical), 6 years of experience in offhsore oil and gas platform of which 3 years in control room.
Over 9 years experience in Instrumentation & control in Chemical, Power, Cement, Sugar & Petrochemical industry
I have worked in Pre-Commissioning, Commissioning, Normal running Plants. In India and Abroad, both places I have worked. I have worked in Chemical, Fertilizer and oil and gas industry
QA/QC Inspection, Fabrication, Installation, Facilities Upgrade etc.
Special Skills in DCS Operations
SAP SD functional cons. resume total 6 yrs exp 3yrs in SAP SD+ IS OIL functional consultant
Medical support to clients operating in remote or hazardous and offshore environments worldwide. Maintaining adequate medical facilities. Providing services such as First aid training, Health and safety checks and enforcing the companies HSE plan, and ensuring a safe working environment.
Mechanical, Automotive, Project, Calibration, Engineering, Production
Instrument technician
I am working as safety officer at Aramco Saudi Arabia for more than 6 years. I am interested to work in your country. Please arrange my telephonic interview and if you need further documents please inform me on my email.
Operation and Maintenance of Utilities, Project Management, Energy Management, Six Sigma and IT applications
In Indian Naval Hydrographic Department, I have worked in various organizations of Naval Hydrographic Department at various capacities including survey assignments onboard ships, National Hydrographic Office as Quality Controller/Quality Assurance member and National Hydrographic School as Hydrograp
15 year career of Document Management and Control. Assisted in the development and implementation of EDMS. Held over sea positions in various European locations, Middle East and Asia. Conversant with International standards, guidelines and regulations.
A Nigerian. Qualified and experienced geoscientist with 5+years cross-functional experience.
To offer services as Senior piping designer for onshore and off shore oil and gas projects by using PDMS & PDS 3d model system
Process Engineer 10 years O&G + Mining Experience, Global leader in BR&E Promax process simulation, Gas Dehydration, Water Treatment (both produced water and seawater injection), hydrocyclone, flotation and filtration technologies. Comfortable from the Pre-FEED level down to the nuts & bolts.
Fourteen years of experience in Office Administration, Procurement, HRD, Public Relation and Sales Coordination has energized me to seek suitable position in renowned companies. My quest is to further broaden my horizons so as to facilitate better opportunities to serve &better objective to achieve
Responsible for business development of company & for recruitment of professionals like Project Managers, Engineers, &Technicians for Engineering, & Construction industry in India, Middle East, ,etc.To develop and manage our own portfolio of clients and source the most suitable candidates .
International Weldig Engineer (IWE) , CSWIP 3.1 and Level II(two) Pt,Mt,Ut and RT
Degreed in occupational safety and health, 18 years experience in construction safety, sveral yrs. Overseas exp. Working with multi-national staff. Excellent medical background
I am a practicing Health & Safety professional and I have built substantial experience as an HSE Advisor with various organizations onshore, offshore and internationally.
A highly qualified and experienced marine engineer, with extensive experience on LNG ships. Skilled in all management roles and function including IT. A skilled problem solver who takes general overview and generates viable solutions.
Experienced Industrial Structural Engineer - concrete, steel - 20+ years, UK & US codes
HSE Manager/adviser with 25+ years experience with large multi-national corporations. Developed successful top quartile HSE/Safety programs on 4 continents. Expert in HSE management, risk assessment, and HSE/safety auditing techniques.
Exceptional performance as a Senior Process and Production Engineer for major industrial, polymer, refining, and specialty chemical manufacturing companies on the Texas Gulf Coast.
U.S Navy Aviation Gas Turbine Jet Mechanic
-A team player, flexibile, detail-oriented, and self-motivated
Working as a CNC Lathe machine operator from 04/11/2008 to till date in L&T Plastics Machinery Limited(Injection Molding).,Chembarambakkam, Chennai .
Acquisition and title research
Over 11 years of SAP BW BI experience as a developer, Lead and Manager
Diploma In Mechancial Engineering+NEBOSH Level-3+Environment, Health and Safety Management Specialist Certification from NASP of USA+ ISO 14001:2004 & 9000:2000 Certified Lead Auditor with 15 Years Experience in Oil&Gas as HSE Advisor/Engineer/Supervisor/Coordinator/
I have more than 15 years experience in the field of process control instrumentation and analyzers and have many related field trainings from abroad and in Pakistan. I am forwarding my personal profile for your consideration.
Draftsperson - coil tubing downhole tools, coil tubing wellheads, etc
Engineering experience since 1999 in diversified electrical, instrumentation, automation, and industrial computer applications, generally related to Oil & Gas Industry, Steel, Automotive, Aluminum, Process and Machine applications.
Experience Derrickhand
Project Expeditor
Mechanical Engineer Professional experience of 35+ years in Engineering and Project Management
AutoCad drafter
Piping Designer – 3D Modeling - PDMS - Microstation - Plant Space – 3DM - Auto-CAD
I have a 4 years degree in geology with a relevant experience as wellsite geologist. Actually I have witnessed more than 30 horizontals wells drilled and 10 verticals one's.I can say that I have gained a great knowledge of how to solve drillings problems when they occur.
Having more than 9 years of experience in petrochemical, oil & gas process plants and utilities. Having experience in commissioning, pre-commissioning activities in Field, DCS & SCADA. (FOXPORO & Emerson Delta-V Systems)
Key specializations: GE Turbine control systems- MKIV, MKV, MKVI, GE excitation systems- busfed, potentialand compound source, SVR, rotating DC, brushless, EX2000, EX2100, Load commutated inverters (static start), electrical and generator protection. DLN 1.0, 2.0+, 2.6 systems, versamax PLC, genius
BE (MECH ) PIPING DESIGNING & STRESS ANALYSIS
Well Engineering skills
Autocad drafter designer
I am a fully qualified derrickman and have been working offshore for the past 9 years.
I have learned Software : Pipesim 2000, Caesar II, Microsoft Office, Power Point, Autocad 2D
I worked as mud engineer for 2 years in Indonesia and now I am solid control engineer and I am running a job for Drilling Project in Libya
33+ years in the oil and gas service industry. His portfolio includes (but is not limited to) field operations and supervision, sales, marketing, business development, and management.
First   Prev   101   102   103   104   105   106   107   108   109   110   111   112   113   114   115   116   117   118   119   120   121   122   123   124   [ 125 ]   126   127   128   129   130   131   132   133   134   135   136   137   138   139   140   141   142   143   144   145   146   147   148   149   150   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com