Resume - Capable working with minimum supervision as solids control and drilling waste ma...

Misco Jobs

Resume #77490

CONTACT INFORMATION:
View contact information...

PERSONAL DETAIL
Born: Ujung Pandang, February 21st, 1978.
Marital status: Male/Married.
Religion: Moslem.
Height/weight: 167 cm/70 Kg.

EDUCATION
1996 - 2002: S1 Degree in Mechanical Engineering, Moslem University of
Indonesia Makassar
TRAINING

* February, 2008
Basic training Hydrogen Sulfide (H2S) safety awareness, organized by PT. Pandu Selamat Utama- Jakarta.
* April, 2007
Basic offshore safety induction and emergency training (BOSIET), include: Helicopter under water escape training (HUET), induction to sea survival, basic life support and basic fire support. Organized by PT Global Nusantara Technical Services, Balikpapan (badge valid until: April 3rd, 2010).
* March, 2006
SOS, schedule oil sampling procedure, organized by MSD training PT. Kaltim Prima Coal
* September, 2005
Slinging and lifting equipment, Advance crane 10, 20, 30 ton, organized by MSD training PT. Kaltim Prima Coal
* December, 2003 - February, 2004
Heavy equipment mechanic skill development at SMK Neg 5 Makassar.

WORK EXPERIENCES

DRILLING SERVICES
* February, 2008 - Now
Sr Service Engineer at ELSICOM ENGINEERING in cooperation with TASK-ES B.V (a group company of NMA/Netherlandse Machinefabriek Alkmaar) for solids control & DWM at SHELL drilling and exploration area in Libya, north Africa. The drilling operation with High temperature up to 400o F, High pressure up to 14.500 psi and H2S up to 4 % (40.00 ppm).
Key Responsible:
* Ensure that all solid control and drilling waste management equipments are working properly as need (decanter centrifuge,cutting dryer, screw conveyor and hydrocyclone).

* Maintain mudweight
* Enactive that all job done meet the customer safety standard, pre job planning, review JSA and work permit.
* Performing Daily report.

* April, 2006 - January, 2008
DWM Engineer at KMC Oiltools Balikpapan-Indonesia (SCOMI Group), an service company in the rig site.
Key Responsible:
* Ensure that all solid control and drilling waste management equipments are working properly as need (Decanting centrifuge,water base mud-water separator centrifuge, shale shaker, hydrocylone, mud cleaner, centrifugal pump, wilden pump and scroll conveyor).
* Maintain mud weight as per programmed (in coordination with mud engineer).
* Clarified water base mud and separated between water and mud (after used for drilling) to find water with standard ph, ensure that the disposal water friendly environment.
* Enactive that all job done meet the customer safety standard, pre job planning, review JSA and work permit if necessary.
* Reporting Daily report to KMC Oiltools representaive DWM Manager and Customer representative personal/Company Man.

MECHANICAL MAINTENANCE
* April 2005 - March 2006
As tradesperson mechanical at PT. Kaltim Prima Coal (PT. KPC), a coal mining company located at Sangatta, East Kalimantan, Indonesia.
Key Responsible:
* Repairing Caterpillar haul truck (CAT 3500 series engine, hydraulic and power train).

CONSTRUCTION
* March 2004 - November 2004
As Project Control at PT Rekayasa Industri for Nilam VLP Gas compressor project VICO Indonesia, East Kalimantan. Job reporting to site Manager.

ORGANIZATION EXPERIENCES

HMM UMI (Mechanical student organization, Moslem University of Indonesia Makassar).

* Delegation of HMM UMI at The 12nd Indonesian Mechanical student meeting, organized by HMM UNTAG 45 Surabaya, November 1998.
* Delegation of HMM UMI at The 13rd Indonesian Mechanical student meeting, organized by HMM Bung Hatta University Padang, September 1999
Page 2 of 3

JOB/PROFILE SUMMARY

* Focused on achieving target, primary safety, excellent teamwork & organization, communicative and eager to learn.
* Capable repairing, R&I Diesel engine (strong knowledge about Caterpillar engine 3500 series), hydraulic system, maintenance planning, solids control/drilling waste management.
* Computer: Ms. Office/ Auto CAD 3D
* Language: Arabic and English

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 10251 to 10300 of 10917)

Go to Search Parameters...

Brief Description

Capable working with minimum supervision as solids control and drilling waste management eng, Mechanical skill, computer and management.

Welltest, Snior Operator, Supervisor. 5 years experience. Worked Worldwide.

Experienced Electrical Superintendent seeking employment within the Australian construction industry, where hopefully my varied knowledge and experience can make a positive contribution to any prospective employers and also where I can continue to further develop myself within the business.

Project Engineer wit BSc of Chemical Engineering and experiences in oil and gas

Looking for senior level assignments in Project Management & Business Development, Health & Safety Management, Human Resources, Learning & Development and Business Startup.

M.Eng graduate engineer, over 6 years international experience in contract management / procurement and project controls for multi disciplinary oil / gas / LNG projects in Asia and Africa, with contractors and operators

Perform concurrent duties of a project manager which involve the management of several Aramco and non Aramco projects in close coordination with the client and/or his representatives and with the engineering design team

Mechanical Engineer with proficiency in IDEAS, Nastran

A dynamic accomplished Information Technology Professional with unique combination of experience in Networking and Hardware. Strong Analytical, Organizational and problem solving skills. Ability to identify Operational Deficiencies, skilled in applying Technology and Administration practices to impr

Mechanical engineering finite element analysis composites ansys Master's

Highly organized and innovative Manager with an exceptional track record of cost minimization through creative procurement approaches and proactive management style focused on building trust and improving departmental teamwork in fast paced union environments.

I'm over 5 years experience in multinational and overseas company. Have strength in knowledge and leadership. I'm always give the best and reach the best in every role that I walk with.

Business Administrator with MBA from Oxford, UK

MWD, drilling, construction

Time served pipefitter with 12 years experience.

PLANNER SMELTER

Very good exp on Document MAnagement, Administration and Trouble shooting.

Automation, Control, Electrical, Instrument, Field service engineer

I completed my Master in Business Administration, and have more than eight years working experience in the mining industry.

PDMS-11.6, PDS-7.1, Autocad-2006, CAEPIPE 5.11, Pro-E Wildfire2.0

E&I Materials Coordinator

Handled operations Batch Chemical Processes, Fermentation, Distillation, Extraction, Evaporation, Plant Utility Section, Pumps & Compresors, Safety of 3M's and Housekeeping, Maintenance & Overhaul of Operations, Troubleshooting, Startup & Shutdown of the operations in the cGMP environment etc.

Operations, Technical, Leadership, Surface, Underground, & International Experience

Experienced Project Controls Specialist in engineering and construction industry. Skilled in project cost, scheduling, analysis and forecasting .

Camp attendant ( Customers Service) Hard working(drivers abstract 4-5-6-)

analyst

Research and Development Metallurgist . Seeking career prospects in metallurgical processing, mineral resources (ferrous metals, base metals, precious and rare metals), process improvement and optimization, research and development, project management, process-business analysis

Coordinate services for wells,oversee project,finalize all paperwork and run daily reports for wells.

Skills summary: Gas and Oil Separation Plant (GOSP), Produced Water Treatment Plants, Installation of diesel Engine Power plants, Mechanical construction works such as Piping, tanks, Ducting, structurals, etc.

Vast array of critical experiences. Operate both independently (single remote site medic) or team (advance life support ambulance service). Disaster management, coordination skills (patient, scene & bystander safety) during crucial events. Coordination of multi-disciplinary emergency services (fire,

SR HR Executive

HE Electrician/Crane Operator with 5yrs. experience

15 plus years experience in tool and equipment management, warehousing, materials management. Dependable, reliable and honest. Looking for long term employment.

P&PCM, MBA, B.Arch

Seeking a full-time position in Quality Assurance

Junior GIS Specialist ( Mapinfo pro. - Arc GIS .....).. Geologist

Retired PAF personnel having 25 yrs of experience and also remianed as instructor.

I am holding Diploma in Electrical engineering. In total have 7years of experience, 2.5years in Enginnering Industry and 4.5 years in Cement Industry

Diploma in fire and safety, GOOD ALROUNDER IN HSE FEILD

Currently working as the Service Manager for the CAT dealer in Papua New Guinea, Tabubil branch. There are 56 employees in the service department and the branch takes care of up to 40% of HD PNG earnings.

Degreed Electrical Engineer with Pro/E Wildfire 2.0 and Pro/Cabling training

Sr operations Manager

I am a Coiled Tubing Engineer and Supervisor. I have worked both on and offshore for Schlumberger and Halliburton in various parts of the world over the past 5 years and have a very good track record.

IIT Graduate - SAP Implementation Exp - 2 yrs

Piping, PDS, PDMS, PSDS Designer Over 9 years experience in the field of Mechanical, Piping Engineering Design / Drafting and Construction. A variety of successful projects for power, industrial, chemical, petrochemical, oil & gas, refinery, pharmaceutical and cement plants.

Operations Supervisor

7 years engineering and management experience in the oil and gas industry. PMP certified with extensive civil engineering experience.

SAP FICO consultant with 10 years experience

Graduated in the field of Mechanical Engineering and presently working with one of ADNOC Group of companies as a Maintenance Planner / Scheduler (Mechanical). Have been associated with Oil & Gas sector for more than 4 years. Work experience on CMMS and Primavera skills.

A senior cost & controls engineer with extensive experience and a professional qualification in Mechanical Engineering coupled with a strong background in project management,project controls, contracts administration,variation orders &claims management.International experience in large EPIC projects

First Prev 201 202 203 204 205 [ 206 ] 207 208 209 210 211 212 213 214 215 216 217 218 219 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out