Resume - Control & Instrumentation Engineer with 5 year Exp in Detailed Engineering

Misco Jobs

Resume #77503

CONTACT INFORMATION:
View contact information...

To become a successful professional and willing to work in an innovative and competitive world of control systems and its applications. To enhance my skill set towards organizational and personal growth through exposure to challenging assignments.

Professional Profile
* Total Years of Experience: 5 years
* Key Skills: Project Management, Detailed Engineering
* Job Objective: Project Manager, C & I (Project Works).
* Current Industry: Projects, Planning & Execution
* Current Profile: Project Management, Detailed Engineering (design)
* Current Location: Gurgaon

Core Competencies

Detailed Engineering- Control & Instrumentation

Control System – DCS & PLC
* Design & Preparation of system configuration as per tender requirements
* Preparation system Input & Output database.
* Preparation of panel layout, GA diagram, I O allocation as per Functional Area classification
* Preparation of Graphics as per process diagrams & requirements
* Preparation of Control Logics & Schemes for process control

Field Instrumentations
* Preparation of P&ID with data sheet for field instrumentation
* Field instruments Hookups
* Preparation of Instrument List & Input –Output list
* Control Loop & Control Logic Development as per Process requirements
* Cable schedule, rooting and layout preparation

Erection & Commissioning- Control & Instrumentation

Control System & Field Instrumentations
* Preparation of FAT documentation and setup
* Panel Erections, Wiring of marshalling cabinet at site
* Hot & cold check of DCS wiring
* Troubleshooting of technical problems occurring during commissioning
* Erection & commissioning of field instruments as per hookup diagrams
* Testing and calibrating the new instruments for their operability and reliability

Strategy Planning & Management
* Proposal building and implementing through budget planning for the entire instrumentation package for project
* Project scheduling with project team & customer /client interface.
* Efficiency and work experience with International clients in terms of leadership, manpower management and organizational skills

Technical Skill Set

Control Systems
Distributed Control System
(DCS ):
* Ovation OCR 400, DELTA V (Emerson),
* CS3000 (YIL Ltd),
* SPPTA-1000 (Siemens),
* Micron(Forbes Marshall), Microsys3200 (Micro verse)
* Drives & PLC:- Siemens, Rockwell
* Single Loop Controllers: Yokogawa, Siemens, Eurotherms
Field Instrument * Rosemount 3051s Transmitters with HART calibrators
* Yokogawa EJX series Transmitters
* Flow meter: - Orifice plate, Flow nozzle, Aerofoil
* Control Valves, Power Cylinders

Career Highlights

Assistant Manager, Power & Water Solutions, Emerson Process Management India Ltd
Gurgaon from May'08 – till date

Emerson Process Management India Ltd (www.emerson.com) Power & Water Solutions Division,

Organizational Reporting
Functional reporting to Senior Manager

Key Responsibilities

 Detailed Engineering of projects as per project contractual scope and design requirement
 Preparation of system configuration & Selection of system Hardware
 Preparation of Input –Output data base as per client Input
 FAT Support during testing of system
 Technical evaluation of buyout system and equipments as per contractual term

Projects:-

 Handling Project management (Design & Execution):-

o 2 x 130 MW Phase- I & 1 x 250 MW Phase -II, Plant & BOP DCS (Thermal Power Plant ) Bhushan Power & Steel Ltd, Orissa o 2 x 500 MW NTPC Simhadri Super Thermal Power Project Stage –II ( Station C & I Package)

Senior Executive, Power Generation Automation, Siemens Ltd
Gurgaon from Nov'07 –May'08

Siemens Ltd (www.siemens.com) Power Generation Automation Division,

Organizational Reporting
Functional reporting to Lead Manager

Key Responsibilities

 Detailed Engineering of projects as per client and design requirement
 Preparation of system configuration & Selection of system Hardware
 Preparation of Input –Output data base as per client Input
 Logic Development according to Client Inputs

Projects:-

 Handled Detail Engineering (Design):-

o 8 x 135 MW, BOP DCS (Lignite Thermal Power plant ) JSW, Raj West Power Ltd, Barmer, Rajasthan

 Handled Commissioning Activities: -

o 92.2 MW GIA –TNEB Natural Gas Combined Cycle Power Plant. BOP & BTG DCS (BOP & HRSG Boiler with Steam Turbine),Vallautur- Ramand, Tamil Nadu

Senior Engineer, C& I (Design) ISGEC JOHN THOMPSON
Noida from Dec'05 - Nov '07 The ISGEC Group comprises the heavy engineering

ISGEC John Thompson (www.isgec.com).IJT is the leaders in manufacturing of Heavy duty Boiler like High Pressure AFBC & CFBC Boilers (Forster Wheeler USA Design), Industrial Boilers.

Organizational Reporting
Functional reporting to General Manager (C & I)

Key Responsibilities

 Lead Engineer for CFBC group o Detailed Engineering of projects as per client and design requirement o Validation of Boiler Control System
 On Site Coordination for Project Execution
 Additional charge of Proposal Engineering

Projects:-

 International Project successfully completed Detailed Engineering, Execution, Erection and Commissioning on site o 5 x 56 TPH (25 Kg/cm2 /380˚C) TG Boiler for Sudanese Sugar Company Ltd, At Assalaya in SUDAN

 Successfully done Detail Engineering (Design):-

o 2 x 105TPH ( 65 kg/cm2/480 ˚C ) AFBC boiler for Rajasthan Spinning and Weaving Mills Ltd, for 2 x 23 mw Power Plant o 4 x 250 TPH (110 kg/cm2/510˚C) CFBC boiler for Bhushan Energy Ltd Power Plant o 4 x 210 TPH (110 kg/cm2/510˚C) CFBC boilers for Bhushan Power & Steel Ltd, Power Plant

 Successfully Erected & Commissioned: -

o 1 x 80TPH ( 45 kg/cm2 /440˚C ) DG boiler for Triveni E&I Ltd, at Khruja in UP state

Junior Manager (Instrumentation) in Dr. Reddy's Laboratories Ltd,
Hyderabad from Dec'04-Dec'05 Based at Hyderabad Generics Formulation unit with USFDA

Dr. Reddy's Laboratories Ltd (www.drreddys.com) Dr. Reddy's Laboratories is an emerging global pharmaceutical company with proven research capabilities. It produces finished dosage forms, active pharmaceutical ingredients and biotechnology products and markets them globally, with focus on India, US, Europe and Russia.

Organizational Reporting
Functional reporting to Manager Engineering

Key Contributions

 Assisting management in documentation and facility up gradation for USFDA MHRA, MCC, ISO 14001 & 18001 Audits
 Coordinating with technical team for validations of control system & field instrumentation with documents like IQ, OQ, PQ protocol

Engineer – (Projects) in Orchid Chemicals & Pharmaceuticals Ltd,
Aurangabad from Sep'03-Nov'04 Bulk drugs Facility unit with USFDA

Orchid Chemicals & Pharmaceuticals Ltd (www.orchidpharma.com) Orchid Chemicals & Pharmaceuticals Ltd. is an integrated pharmaceutical major (headquartered in Chennai, India) with diversified competencies in bulk drugs, formulations and drug discovery, with a strong orientation towards the advanced regulated markets.

Organizational Reporting
Functional reporting to Manager Instrumentation Engineering

Key Contributions

 Successfully assisting project team for Erection & Commissioning of DCS and field instruments (Plant I &II)
 Calibration of instruments, preventive maintenance as per master schedule with calibration organizer
 Documentation work for various internal and external audit works.

Educational Credentials
ICFAI University Pursuing
Masters of Business Administration (MBA)

Jawaharlal Nehru Engineering College (JNEC), Aurangabad, Maharashtra 2003
B.E. (Instrumentation) First Class with Distinction.

IOPE (Dr. B.A.T.U. Lonere) 1999
Diploma (Electrical) First Class with Distinction

Strengths

* Achievement & result oriented with excellent communication & interpersonal skills
* Ability to identify key aspects of any issue at hand and develop a systematic approach to deal with it combined with a desire to excel at any work in hand
* A good team player with an ability to lead a team by example and motivate them to achieved desired objectives
* A strategic thinker with an innovative and analytical mindset
* Ability to Priortize and good planning skills

Personal Details
Date of birth: 29th August, 1979
Languages known: English, Hindi, Marathi
Marital Status: Married

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7901 to 7950 of 10884)

Go to Search Parameters...

Brief Description

B Sc. Chemical engineering • Over 3 years experience including in process development

I'm petroleum and Gas Engineer in specilty Development and Exploitation of Oil & Gas fields,taking my degree from Kuban State Technical University Krasnodar Russian Federation in 1999.From this university done 1 year advance course in the same specialty

I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future

Knowledge Of Autocad, Pro-engineer, Catia, Unigraphics, Ideas

An accomplished Software Engineer specializing in Object-Oriented Design and Analysis with extensive experience in the full life cycle of the software design process including requirement definition, prototyping, proof of concept, design, interface implements, testing, and maintenance.

More than one and a half year of hands-on experience in Instrumentation and Project and Sales.

Control & Instrumentation Engineer with 5 year Exp in Detailed Engineering

I'm a geophysicist.

Ph.D. in Metallurgy, Specialist in Surface Treatments, Project Management, International Experience etc.

Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East

Senior piping designer

Turbine tech.

Instrument Engineer with more than 27 years of experience in execution of erection, testing & commissioning/ proposals in the field of Instrumentation Projects for Oil & Gas, Refinery, Petrochemical, Fertilizers and other Chemical & Process Industries.

It is my intention to secure a career in the field of Health and Safety on an oil/gas platform. However, since I am new to the industry, I will consider any position.

B. Eng. Petroleum & Gas Engineering University of Port Harcourt, Rivers State, Nigeria.

I can work floors, motors, and derricks.

I have a very strong back and am not affraid of hard work. I am very punctal

Geology, To be graduated.

BS Chemical Engr. with 15 years onshore/offshore oil/gas production engineering support, facilities planning and design, capital project development and economic evaluation, operations, process simulation/optimization, commissioning, construction and maintenance. Also trained young Saudi engineers

chemist, AUC english course, computer course, 2008 graduation

I have 31 years of Technical, Hydraulic Specialist, Fitter experience in S.A Air Force and on Majour Ind Steel Process Plants. Would like to become ROV operator.

BS Engineering, with 11 years experience in Shell Gas LPG (pak) as Health & Safety Officer/Operations Engineer, came to Canada in 2005, initially in Toronto but relocated in Calgary due to enhancement of my career in Oil & Gas field. In Toronto worked in ITN Food Corporation till June 2006.

Skill: I have worked as Production Shift Supervisor in Gas processing plant from 01-07-2000 to 31-03-2006. Successfully completed Basic Offshore Safety Induction & Emergency Training (OPITO Approved) conducted by MSTS ASIA in Malaysia, Nutec Group. Qualification: B.Sc. Engineer (Chemical), BUET.

More than 2.5 + years of experiences in the field of Planning as a Planning Engg(BE Mechanical Engg.). Analysis of Resource requirement, Performance analysis, Progress measurement, Monitoring & Reporting of EPC deliverables and activities of Pipeline projects

Mechanical Engr: Fabrication works as Mech w/Shop manager ,drawing study,planning,procurement,supervision QA/QC ,erection.

Knowledge & exp. in Electrical and Instrumentation products, in PLC, SCADA and HMI systems, drives, field instruments, Allen Bradley - Micrologix, SLC, ControlLogix, Compact Logix, Flex Logix PLC’s, Panel View Panel view plus Families, in Controlnet, Devicenet, RSView32, RSView SE Redundant

Microcontroller Application, Interfaces Application - PLC (SCADAPACK,OMRON,GE Fanuc, etc), ADAM RTU,EXPERT Module,Flow Compute (OMNI,Sybertrol,AutoExec), Compact PLC (MOXA ioLogik)

Skills: semi skilled fitter & turner, horizontal boring mill, veritcal borer, central lathe, fitter, oilmaker, piefitter, milling machine. I will be finishing my N2 early March to be qualified.

I am very much interested in Oil Gas Exploration.

I've studied chemical Engineering. I passed some curses in drilling fluids, well log, zagros formation studies, and also water treatment

I am a female geologist who is currently doing my masters in geology. I finished from the University of Port harcourt, rivers state In Nigeria. I am a team player and still able to work independently with minimum supervision.

More than three (3) years experience in Mechanical Engineering in offshore/ onshore Oil and Gas Production.Application of Incident and Injury free approach in project, HAZOP study in project.

Chartered Accountant with three years experience in Oil and Gas Industry

I would like to work with a company that is well established and stable.. I enjoy working in the Oil & Gas Industry because of the people I have meet and worked with...I want to learn more about different aspects of the Industry and look forward to moving up with a good company.

8+ years in the field of Cost Analysis (Estimation & Cost Control Function) for Refineries, Petrochemical Complexes, Oil & Gas Pipelines / Terminals and Fertilizer Projects

I work at present servicing a fuel storage depot as a Maintenance Electrician, Leading Hand. I have 6 years experience of this type of work and many specialised qualifications in this area.

Situations that may be transformed to improve define the main objective of my professional profile, problems that demand critical analysis, evaluation of variables, and proposition of novel solution strategies to overcome them. I am much motivated, well prepared, and ready to learn more everyday.

Mechanical engineer B.Tech. 6 yrs experience.(UAE) exp in dealing with contractors, sub contractors etc , contacts with major oil companies like adco,etc in UAE, excellent knowledge of UAE market .

can apply any job which you think I am fitting for

I am looking for a job in Oil Industry. I'm willing to "Hard work" and work with "Any entry level position" with your concern. I certainly would appreciate it very much if you could give me an opportunity in your company. I am confident of doing a good Job with your concern.

B.Tech/MBA,Total 5 + years experience in Mechanical & Construction Sectors. Working as CONTRACTS ENGINEER (Planning/Estimate/Proposal/Qty’ Surveyor) in M/s CAPE EAST LIMITED CO (W.L.L), DOHA, QATAR.

Chemical Process Engineer, Aspen Plus, HYSYS, MATLAB, CHEMCAD, Reviewing PFD, P&ID, Design Specifications

I m Final Year Student of Mechanical Engineer and will be pass out upto december 2006. I want utilize my knowledge and skills for an organization, which offers opportunities for personal growth and career development.

Icorr paint inspector/rope access technician

Experice engineer with project engineering and project managemnt

Mechanical Engineer

working in Ras gas - qatar as an instrument technician with 14 years experience. good knowledge in process instrumentation. good experience in yokagawa CS3000 and Foxboro I/A series Dcs. having diploma in electronics and telecommunication. pls see attached resumes for more details.

To continue employment in the field of oil & gas operations. I will bring dedication, good work ethics, and teamwork to your company.

Hard Working, faster to learn, Capable to working by individually or as a team and Capable to working in any different area

All qualifiations are posted on my resume exept that i have a passport.

First Prev 151 152 153 154 155 156 157 158 [ 159 ] 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out