Resume - I have been working construction in the Petroleum/Oil/Gas field for the past thr...

Misco Jobs

Resume #77511

CONTACT INFORMATION:
View contact information...

Titles:
Project Controls Engineer / Field Cost Engineer

Education:
Missouri State University Springfield, MO 2005
Bachelors of Science in Elementary Education Emphasis in Early Childhood, Graduated Cum Laude.

Southwest Missouri State University, West Plains,
Associates of Science in General Studies, MO 2002

Ms. Kellogg has experience in planning, scheduling, and cost control FCC Project with Chevron Pascagoula. This project was a $300 million and 1.1 million man-hour turn-around. The total project was 2.6 million man-hours. On this project she is responsible for various cost duties and schedule population Experience on this project has given her the knowledge about the project controls aspect of construction.

She has also worked at the Exxon Mobil in Torrance Ca with the Jacobs Project Controls group. Here she was the Field Cost Engineer and was responsible for reporting progress and productivity on two projects occurring simultaneously.

She is currently working for the Shell Motiva Crude Expansion Project at the Kiewit yard in Ingleside, TX. At the module yard, construction is currently building the crude and coker modules. She is responsible for what the subcontractors are producing for project controls and to make sure it is done correctly and in a timely manner.

Construction employment includes:
Project Controls Engineer – Jacobs Engineering Group Inc., Houston, TX, Jacobs Engineering Group Inc for the following project:
Shell Motiva, Port Arthur, Tx. Refinery
Crude Expansion Project
Kiewit Module Yard – Crude and Coker Modules – Ingleside, Tx.
100M Expansion Project
Monitor yard progress against approved schedules.
Ensure that required yard cost reports are produced, accurate, signed, and distributed appropriately.
Ensure that the requirements of scope and change control of yard related costs are followed. Ensure an audit trail back to the baseline construction budget.
Monitor craft resources vs. plan, module percent complete vs. plan, and craft productivity/performance measurement.
Review and approve leading indicator reporting.
Audit and surveillance of the area's module budget.
Audit and surveillance of the yard schedule to the approved baseline.
Ensure the yard short term look-ahead schedule supports the yard schedule objectives.
Track and/or validate progress of subcontracts.
Review and analyze invoices.
Review and analyze the yard cost reports, progress measurement, trend analysis and schedules. Ensure concurrence prior to yard submission to the JV and area teams.
Review and approve monthly reports.
Put together and submit weekly reports.

Cost Engineer - Jacobs Engineering Group Inc., Cypress, CA, Jacobs Engineering Group Inc. for the following projects:
Exxon Mobil, Torrance, Ca. Refinery
Fuel Gas Optimization/ Two Stage Desalter Projects
12M Capital Project/42M Capital Project
Cost department responsibilities include:
Assist in putting together monthly reports and report presentations.
Developed forecast for cost reporting.
Update JACs (Jacobs cost control/tracking system)
Update Field Labor Analysis weekly.
Keep track of year to date, weekly, and monthly hours for craft, subcontractors, and construction management.
Code and sign invoices.
Produce accruals on a monthly basis.
Code and sign purchase orders.
Created and maintained weekly planned vs actual cost curve.

Planning department responsibilities include:
Developed and maintained pipe tracking system.
Developed and maintained structural steel tracking system.
Maintained electrical and instrumentation tracking system.
Work with field superintendents to gain weekly progress for all disciplines.
Update progress weekly in progress sheets and on three part curves.
Coordinated constraint analysis team activities and participated in meetings to control construction project constraints.
Help with writing/estimating RFIs when necessary.
Write AXWs/CAFs to submit for client approvals
Maintain RFI/AXW log
Work in Prolog to input cost code structure

Field Accountant-JV Industrial, La Port, Texas, JV Industrial for the following project;
Chevron Texaco, El Segundo, CA
4 Crude Shutdown
Field Accountant responsibilities include:
Entered time into Passport (Chevron's cost tracking system)
Worked to clear up issues with work order numbers
Set up job clock program (Time Summit)
Created and ran reports through the Time Summit program to reconcile against JV cost accounting system
(Turnip)
Project Controls- Jacobs Engineering Group Inc., Baton Rouge, Louisiana, Jacobs Engineering Group Inc. for the following project:
Chevron Texaco, Pascagoula Ms. Refinery
FCC Alky 1 Reliability & Net Cash Margin Uplift Project
300MM TIC Project
Planning department responsibilities include:
Work closely with the Jacobs and CVX Engineering Team on receiving the Passport (work order) packages and documenting this in Master Work Order Checklist.
Assigned to the task of finding the subcontractors assigned to duties related to specific Work Order Packages.
Responsible for communicating with both the home office and client about Work Order Package completion and distribution.
Accountable for building and maintaining the master Work Order Checklist to ensure all packages were received and distributed to subcontractors.
Created tasks for Work Order Packages in both Passport and P3e.
Cost department responsibilities include:
Worked with timekeepers to create reports for the checks and balance of their Passport timekeeping system.
Supervised time entry in Passport.
Addressed concerns with both the client and subcontractor about time/per diem entry in Passport.
In charge of monitoring approval of time in Passport by the client.
Responsible for rolling up time in Passport for payment of home office by the client to the subcontractors.
Assigned to the task of sending out the transfer reports from Passport showing the subcontractors what dollars, hours, and per diem they have entered into Passport with authorization number on it to use in their billing/invoicing process.
Accountable for creating invoices from the field based on Passport roll ups.
Liable for balancing and coding invoice vouchers for payment on labor and per diem invoices, delta invoices, equipment invoices, incentive invoices, etc.
Worked on daily head count information and used it to create reports for PCM.

Software Experience:
Microsoft Outlook, Microsoft Word, Microsoft PowerPoint, Microsoft Excel, Passport, Primavera – P3e 5.0
Prolog, Quicken Books, Prolog

Construction Experience:
FCCU (Cat Cracker)
4 Crude Shut down
Fuel Gas Optimization
Two Stage Desalter
Crude Expansion Project

Employment History:
Jacobs Engineering Group Inc August 2007-present
Cost Engineer/Project Controls Engineer

JV Industrial April 2007-July 2007
Field Accountant

Jacobs Engineering Group Inc Jan 2006 – March 2007
Project Controls

Ozark Action, Inc May 2004 – Dec 2005
Case Manager

Penmac Personnel Jan 2001 – June 2002
Customer Service Representative

Show Me Travel June 1999 – Dec 2000
Bookkeeper

References:
Furnished upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5151 to 5200 of 10816)

Go to Search Parameters...

Brief Description

Bachelor in Chemical Engineering (Co-op option) (University of Ottawa, Canada) Hard worker, enthousiastic.

Major Course Work: Process Heat Transfer, Chemical Engineering Plant Design I, II, and III, Kinetics and Reactor Design, Process Dynamics and Control, Mass Transfer, Unit Operations, and Chemical Economics and Design

Exp.Mechanical & construction manager in Oil & gas , more that 26 years of work with big oil companies.High educated with MSc in Mechanical and offshore engineering from Robert gordon Uni /Uk.

7.5+ years of Control System Enineering experience with Global Control System leaders(INVENSYS-TRICONEX IPS/FGS,YOKOGAWA Prosafe ,CS3000,HIMA-IPS,EMERSON-DELTA V Systems)

As a Instrument supervisor to lead the work crew and holding the responsibility to complete the job with standard ¡§HSE¡¨ practices as per the strict ¡¥Shell¡¦ safety norms of Petroleum Development of Oman. And also involved in Installation, calibration, loop checking, Pre commissioning, etc..

Cementing Engineer

holding 3 yrs diploma in hotel management and catering technology with more than 8 yrs exp. in catering field

Working in QA/QC

Currently working in the North Sea as a Slickline Supervisor on an Ad-Hoc basis.

PDS &piping drafter

B.Tech Chem engg + MBA (marketing) with 10+ years in Project Management in O&G / Petrochemical Projects

QUALIFICATIONS : M.Sc. (Geology), Skill : Geologist, Mudlogger, Geotechnical Engineer

Good knowledge of Environmental Impact Assessment (EIA), HAZOP, Risk Assessment, Safety Audit, Environmental Audit, & Various Safety Techniques Like; International Safety Rating System (ISRS)-By DNV, Process Safety Management (PSM) etc.

Graduated Mechanical Engineer,Certified Caterpillar Engineer, Experience as a Field Engineer in the Gas & oil, Marine,Mining Industry

13 years of Experience in DCS System, PLC & ESD system as well as field instrumentation.

Ph.D. in materials science and engineering, four year experience in teaching, five year experience in working in various industries. Fields of specialty; corrosion, coating, materials selection

Geophysicist. Current area - Exploration Seismology. Strong experience in Geophysical Data Processing, Theory of Polarization Anomalies, Numerical Modeling.

* Over 11 years of experience in areas of Process Automation Engineering & Instrumentation.* Hands-on experience in Automation Engineering, estimation, design, installation & maintenance of equipments in India & Abroad.Expertise in advanced PLC, systems & providing technical support on Instruments.

adaptability, flexibility, coputer knowledge

DEsign Engg., PLC, SCADA, I&C work Experience

Skills include Petroleum Engineering,reservoir Engineering,Petroelum Geoscience,Geochemist,Mud Logging

I have recently completed M. Sc. in Petroleum Technology, from University of Karachi.

Pipe rack design, routing of pipes on rack, Preparation of Tank farm Layout in detail and piping layout for the same from the process point of view. Preparation of detailed piping layout, Equipment layout, General Arrangement drawings, Isometric checking.Isometric drawing preparation

I have been working construction in the Petroleum/Oil/Gas field for the past three years. I have done turnarounds and capital work.

Cogeneration, gas engines

• Results-driven, logical and methodical approach to achieving tasks and objectives

Wide experiences in Occupational Health, Safety and Environment, advisor to the employer on the measures taken in the interest of the safety and Health of persons employed in the place of work. Inspect the place of work to determine whether any machinery, plant equipment substance.

2.6 year of experience in Detailed Engineering work of the refinery units helped me understand the profile and the responsibilities of a mechanical engineer (Static) and to realize how important this field is to the oil refining business and I have learned how important it is to be flexible.

Highly personable Drilling Fluids Engineer with over three years of experience in laboratory work, project supervision, logistic services both air and land logistics and mud engineering.• Proficient with Microsoft Office System (including Microsoft Word, Microsoft Excel, Microsoft PowerPoint®, Micro

Project Planning & Control Engineer / Scheduler / Earned Value System Designing and Development/Primavera Group Software Developer/I have been working in Engineering and Construction phases of EPC oil, gas and petrochemical projects/PMP (Project Management Professional)/Project Planning & Control

I am a certified lead auditor in ISO ¡V 9001, OHSAS 18001, ISO 14001 standards.

Monitor daily well progress; provide verbal and written technical input as required to well operations/production department, Prepare well supplemental programs and specifications.

opweration, commissioning,refinery, LNG unloading, termonal operation, plant operator, refinery operator,

Title research and Ownership Reports, Deed Plotting and Runsheet Preparation

Long experienced man, good language skills, oil field experiences and certified as a radio officer, ready to work in the worldwide.

SAP HR Implementation, Recruitment, Training, Compensation Management, employee Relation, Performance management

A chemical process engineer with 12 years experience in oil refining and petrochemical industries

Has served as Supervisor (Mechanical) during shutdown in KNPC, Kuwait and FERTIL, Abu Dhabi. Has experience in the maintenance of Rotary Machinery like pumps, compressors, turbines, etc. and stationery equipments like heat exchangers, columns, vessels and piping. Has computer knowledge.

Skilled in all planning shutdown, shutdown supervision, servicing, modifications design and total project cost control, mainly in power stations and refineries

Pipeline, Pipe Stress, Piping or MEchanical Engineer

Process Design & Review , Review P & ID’s , Computer Programs (Excel, Word, PowerPoint), Training The Junior Process Engineers & Process Technicians

A professional electrical engineer; more than eight years of active experience in electricity sector of Pakistan in controls, protection, SCADA. BSc Elect. Engg.; MSc Controls; MBA. Has also worked in Northern Electric plc, UK. Technically competent; has ability for business and financial analysis.

OBJECTIVE A challenging position in managerial level QUALIFICATION FOR THE JOB Good education and fully experienced with engineering and management duties,, have initiative and willing to accept engineering responsibilities.

: PROJECT ENGINEER //SENIOR ENGINEER /ELECTRICAL -- ENGG./(DESIGNS)/PROC./CONSTRUCTION/SUPN./O & M OIL/GAS/PETROCHEMICAL INDUSTRIES ETC.

12 yrs exp in Chemical Industry . strong academic background B.E. Chem +ICWA+LLB+MM (AIM, Philippines) seeking for a suitable opening

cnc turn mill machinist setter

JR. PDS DESIGNER PIPING WORKING FOR WELLCOMPANY IN MUMBAI ON PDS FOR PIPING. GOOD EXPERIANCE OF PIPING.REFER DETAIL BIODATA.

This is the Drafts man C.V for Zueitina Oil Company, Libia.

Please see attached cv regarding your procurement requirements

PROCESS ENGINEERING OF OIL AND GAS PROJECTS

First Prev 101 102 103 [ 104 ] 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out