Resume - Diploma in mechanical Engg and at present working in QATAR STEEL as DR plant ope...

Misco Jobs

Resume #77614

CONTACT INFORMATION:
View contact information...

Being an ambitious and motivated, I would like to exploit my potentials by focusing on improving and diversifying my technical skills through a progressive organization in order to become high calibre technical engineering service personnel in Automation & Control industry

POST APPLIED FOR: Plant Operator

Working experience: I have total 6years working experience in the below
Mentioned field.

Since 20th May 2006 to till date
Working as a Panel Operator with M/s Qatar Steel
Company's Direct Reduction Plant at Mesaieed, Qatar

This is a Natural gas based chemical plant. Producing Sponge Iron, By H2O and CO2 reforming in the present of nickel catalyst. CO and H2 is act as reductant in this process. Its design capacity is 54 tons per hour and has exceeded its capacity to 105 tons per hour. It is rated as one of the best DR Plants in the world, which is achieved by the best skills of operational techniques. Midrex commissioned & new HBI & DRI plant in Qatar steel last year
Nature of Job
Monitoring and Controlling of the Direct Reduction Plant based on Midrex Process for the Production of Sponge Iron. The process is operated With Siemen's AS-235 and PCS-7 systems in DCS.

The job involves operating the plant from the Control Room using the DCS system. Responsible for optimizing the plant parameters for the maximum productivity while keeping the process and equipment at its safe limitations. The job also involves monitoring various instruments of temperatures, pressures, flows and analyzers. Responsible for the operation and monitoring of all field equipments like blowers, pumps, compressors, vessels, valves, furnace, and reformer for their safe operation and attain the highest productivity.
Participated in the various troubleshooting exercise in the day to day plant operations. Attended three capital repairs in the plant. Performed as a team leader and achieved the various repair tasks during capital repairs within the stipulated time frame and man-hours.

To transaction the row material and production in ERP.
Management reporting. Good knowledge about mechanical drawing.
FROM 10th Aug 2002 to 18th March2006
I have worked under the vendor THERMAX BABCOCK AND WILCOX ltd in new power plant project in TATA STEEL involve in boiler erection and commitioning activity.

ACADEMIC QUALIFICATION

Passed Matriculation from B.S.E.B Patna in 1999 with 2nd division

TECHNICAL QUALIFICATION

3 YRS. Diploma in Mechanical Engineering from Bangalore (1999-2002).

COMPUTER KNOWLEDGE

Diploma in Computer
Auto Cad 2D&3D
Well knowledge about ERP (Oracle 11i)
Additional training

1Month special training from MIDREX INC. about Hot briquette iron plant.
Fire fighting training for steel plant by innovative management consultant managed by QATAR STEEL CO. I attained one day BREATHING APPARATUS TRAINING by NAPT managed by QATAR STEEL CO.

SAFETY PERSONAL PROTECTION
* Abide by all safety rules and regulations; by keenly observing to hazardous situation and practices. Report any unsafe situation.
* Have a good sound knowledge about company's safety rules and regulations and perform the job with precaution.

PERSONAL DETAILS
Date of Birth: 30th June 1984
Religion/Nationality: Islam/ Indian
Sex: Male
Languages known: English, Hindi, Urdu
Marital status: Unmarried

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7201 to 7250 of 10924)

Go to Search Parameters...

Brief Description

Diploma in mechanical Engg and at present working in QATAR STEEL as DR plant operator

Strong knowledge and experience in banking, finance and customer service.

B.E Mechanical With 0-1 Year Experience in Chemical & Fertilizer Industry

Electrical Project/Construction Management

I have completed diploma in mechanical engg with first class and also have 8yrs exp in the field of engineering and manufacturing

25+ years experience as Operations Manager in the Resources and Oil & Gas Sectors. Formal qualifications in Engineering and Business.

A competent leader with 3 years of experience within HSE Management in the upstream and downstream Oil & Gas Industry

Seeking a challenging full-time position as an engineer in a dynamic oil & gas organization

Experienced Contracts Manager professional with CLA credential, MBA (December 2009) and proven track record with more than 15 years of business expertise in financial analysis, logistics, engineering, FAR knowledge, strong legal background, and project management.

Technician Mechanical Maintenance

I have a good experience working as Wellsite Geologist for both exploration and development wells (vertical & horizontal). I am familiar with field geological operations and possess good expertise in the Winlog software program. I have good computer skills and fluent in written and spoken

I have Bachelor Dagree in Chemical Technology and have 6 year working experince in refining field in operation

Objective A challenging role in an organization which offers tremendous growth potential and wide exposure to the latest technologies fully utilizing my skills. Work Experience 2+ Years experience in System Analysis and Network Engineer. 4+ Years experience as Materials Engineer

NQF, National Qualification Forum, Qualified as Production Artisan Grade 4

Chemical Engineering Degree and 6 years in Cathodic Protection.

20+ years in Control Systems Engineering/Design. Experienced Intools user.

Having five + years experience in continuous process plants as a senior engineer.

Free ! YOUNG POTENTIAL in FINANCE & ADMINISTRATION

working with Siemens for the past five years in Piping Design & Engineering. expert user in PDS also work on Stress analysis(Static & Dynamic) of various piping sytems using "Caesar". been to Design/ Site offices abroad in Germany & Kuwait.

MSc Chem. Eng. Wide experience in project management, developing, supporting, monitoring, analyzing plans for projects. Develop budgets, define targets for expenditures and oversee execution. Assist management monitoring projects execution. Integrate individual reports to a global report.

Seeking for opening in QAQC and Inspection

Objective: I am seeking a full-time mechanical engineering position. I am looking for a position that will challenge and augment the skills and knowledge I have obtained while providing valuable service to the company.

I am an experienced design engineer working on an oil and gas related projects, worldwide. I am proficient in AutoCAD 2002, Microstation, 3D Plant Design Systems, Smart Plant Review, and INtools.

I am experienced in construction works for oil&gas industry. Have good working knowledge of standards like EEMUA 158, AWS D1.1, ASME Sections VIII, IX and B31.3, RMRS Rules for Construction of Ships, etc. Proficient in planning & scheduling of construction projects using Primavera & MS Project.

Ideally I would like to gain employment within my trade as an electrician, however I am willing to start at the bottom and work my way up within your organization. I am therefore looking for a job as a Roustabout.

OBJECTIVE : Geological Engineer - Over 6 years‘ geological engineering experience - Extensive knowledge of geological formations - Educational background in geology engineering - Able to self-train on new geological software - Responsible, team player, hard working

Cost/Planning Engineer with a Mechanical Engineering background and specialized studies. 5+ years experience. Proven outstanding performance under extreme unfavourable conditions and security threats. Proficient in Primavera, MS Project, spreadsheets. Other :MS e-enterprise, Access and VB

Science major with sales negotiation experience

OBJECTIVE To acquire an entry-level position in petroleum or a research position in or relating to mechanisms of asphalting instability in crude oils, interfacial properties of natural surfactants.

To utilize my acquired background in the field of Electrical Engineering as well as my higher education in Engineering Management and to perform quality work in a professional career related to my technical skills

Hands on experience in Installation, Maintenance of Computer controlled Machines, Video Monitors, Indoor & Out door Ac / Dc Motor Controlled Amusement Equipments, Touch Screens, and Power Supply, and Also Maintain NT Server and 10 clients & Hands-on Experience in Servicing Laptops etc.

A progressively challenging position in the area of Instrument Engineering, where past experience and proven abilities can be fully utilized. The preferred position would provide an opportunity for continued professional growth and advancement.

Having acquired skills in Geology and Applied Geophysics, I will like to work in a challenging Oil and Gas Environment.

Geophysicist Having deep knowledge in seismics and data processing. Also knows gravity and magnetics.

As I am having good experience in Electrical field, working as a Electrical Technician for a contractor employee in Kuwait National Petroleum Company, Mina Al Ahamadi Refinery

I am a well experienced process engineer in oil & gas industry. I am happy to work abroad for long durations. I am an Australian citizen presently working in Perth, Australia. I have a solid 12 yrs experience in oil & gas process design.

Management, Logtics, Cost Control, Sales

Highly motivated individual with strong FEA experience. As a stress analyst, I enjoy analysing the products that designers design, highlight potential problem areas and ultimately help product development by saving cost. My aim is to make product more durable and cost effetive.

I am a qualified geologist who graduated from the Ecole Nationale d’Ingénieurs du Mali (ENI) in 2001

qulification;having my 2years of industrial training instuite(iti),work exp; 8 years in refinary& 2 years in power plant having a capacity of (300*8 )MW

Electrical & Instrument Designer

I am a Petroleum and Natural Gas Engineer having an MSc degree in Petroleum and Natural Gas Engineering from Istanbul Technical University, Istanbul TR.

I did my M.Tech in applied geophysics from IIT Roorkee,india which is the one of the best technical institute in india.in this course I learn seismic prospecting, well logging and non - seismic methods. I did my summer training in O.N.G.C. Dehradun, India and also did industrial training in O.N.G.C

Dedicated and highly motivated instrumentation & control engineer

Have worked in oil industry for 4 years doing fracking, cdl driver,acidizing .

Production Operator

HSE officer with 6yrs of exp. having Nebosh, Iosh, Osha etc.

I have more than fifteen years of progressive professional experience and have matured from a background in material / inventory control, coordination, and warehousing techniques for oil and gas maintenance, construction and manufacturing industries.

Oil and gas production operator level 1

Over 18 years of extensive experience Maintaining a Safe Work Culture, Budgeting, Strategic planning, Policy Development/Implementation, Finance/Leasing, Fleet Maintenance/Management

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 [ 145 ] 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out