Resume - Petroleum Engineer with various and quantifiable exposure in production and rese...

Misco Jobs

Resume #77683

CONTACT INFORMATION:
View contact information...

Degrees
=======
„X M.E. Petroleum Engineering, The University of Tulsa, Oklahoma, USA, 2001-2002; GPA: 3.40/4.00
„X B.S. Petroleum Engineering, Institute of Technology Bandung, Bandung, Indonesia, 1995-1999; GPA: 3.11/4.00
=====================================================================================

Professional Experiences
========================
Feb 2007 ¡V present
Nippon Oil Exploration - Malaysia
Petroleum Engineer
Responsibilities and achievements:
„X Designed monthly multi-rate welltest program for all wells; the data have been utilized for wells performance monitoring, allocated production by well and by zone, production forecasting against facility and drawdown constraints, as well as troubleshooting activities
„X Lead periodical well intervention for running production logging, downhole pressure gauge, downhole sand monitoring tool, and caliper survey with slickline operation; the involvement included well candidates selection, logging procedures arrangement, logging equipment inspection, third party mobilization, offshore jobs supervision, and reporting; the campaign was completed safely in timely manner and within budget
„X Evaluated sand production risk by developing sand prediction model based on empirical data; contingency plan of sand production was established involving drawdown limitation strategy as well as sand control design
„X Involved in designing well completion string for ongoing infill drilling (2008-2009), by emphasizing nodal analysis and tubing stress analysis to determine optimum tubing size
„X Prepared well completion procedure and supervised offshore job execution; the jobs included running tubing string and accessories, dynamic underbalance perforating, and well clean-up
„X Performed technical evaluation for required contracts related to petroleum engineering operations
„X Coached fresh graduates/internship students within organization

Feb 2006 ¡V Feb 2007
Chevron Pacific Indonesia
Petroleum Engineer (at Batang Field)
Responsibilities and achievements:
„X As part of cross functional team of Earth Scientists, Petroleum Engineers, and Facility Engineers to design an EOR development plan for Batang field; the field has OOIP of 112 MMBO, with multilayer sandstone reservoir, complex fault system, bottom water, and gas cap
„X Lead step-out wells project to mainly detect reservoir boundary in frame of reservoir characterization efforts
„X Conducted mini-fracturing jobs, injectivity, and step rate tests to improve understanding on reservoir pressure/behavior
„X Performed conceptual design of well completion and artificial lift based on best practices from other analog fields
„X Additionally to the above, at the same period was also assigned to optimize well production of another light oil field with ESP and natural water drive reservoir; activities included production welltest, rig and rigless well intervention, as well as artificial lift optimization

2002 - Jan 2006
Chevron Pacific Indonesia
Petroleum Engineer (at Duri Field)
Responsibilities and achievements:
„X As part of cross functional team of Earth Scientists and Petroleum Engineers to design and execute field management plan for Area 6 in Duri Field; area of responsibility is a field with multilayer sandstone reservoir; it consists of 500 wells, for both injectors and producers
„X As a project leader of drilling 13 infill producer wells, successfully lead the project team to work based on Chevron's project management guideline; the project was completed in timely manner, within budget, and with production 30% better than forecasted
„X Identified and generated >60 various workover/profile improvement programs for both injectors and producers to arrest the decline rate of Area 6 Duri field; the jobs include adding or squeezing-off perforations, deepening wells, revising gravel pack and screen liner, improving cement bond, acidizing, and installing venturi chokes
„X As a team member in appraisal and proposal work of five development well projects (consist of total >40 drilling wells); all AFEs successfully secured approval from both Chevron's Management and Government of Indonesia
„X Lead well and reservoir surveillance program within area of responsibility; the surveillance included temperature and TDT logs, radioactive tracer and flow-meter/spinner surveys, saturation logs, dynamometer, and sonolog
„X As a Qualified Reserves Estimator (QRE), completed yearly reserves review and business plan for area of responsibility; the methods used for booking reserves include decline curve analysis, volumetric calculation, and analogy modeling; the results were fully complied with Chevron's and SEC's reserves booking guidelines

1999 - 2000
Chevron Pacific Indonesia
Production Analyst
Responsibilities and achievements:
„X Maintained pumped-off wells >97% for >300 sucker rod pump wells to maximize lifted fluid
„X Optimizing lifting efficiency on >200 wells by utilizing Rodstar software
„X Identified >50 underperformance wells due to artificial lift failure and took immediate actions to recover the production levels

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1851 to 1900 of 10917)

Go to Search Parameters...

Brief Description

With a passion for safety duties, the motivation to succeed, strong interpersonal and effective communication skills and a particular talent to forward-planning to develop effective and feasible solutions

My skills as a drilling foreman are Drilling, Work Over, Completion and Safety. I have 40 years of oilfield experience. I have an up to date Well Control Certification.

Pipeline & facility supervision

Looking for and Field Operating Position / Production Coordinator, Can also Well Service

Repair, maintenance and troubleshooting onshore and offshore units (ONCC, OLU), Generators, Compressors (WAC-SS22, WAC-QB), Hydraulic units (EHPS, DAPS, OSU,OSLC), HVAC. Hook – up, setup and installation offshore & onshore equipments Corresponding with Customers and Suppliers I have

I am someone who is highly motivated and organized. I have over 20 years in the construction industry, including work in Western Canada and time in Angola as a Construction manager, where my duties were tto evaluate and implement new processes to achieve cost certainties in an exploration environmen

I have extensive supervision and management experience (including QA/QC) on contracts valued from £30 million to £3 billion in the fields of Oil & Gas related work, military airfields, Power plant construction, water provision and dam construction in the Middle East, Africa and the Caribbean.

Reservoir or Production Engineer

Social Responsibility Specialist

Mechanical Engineer, with +30 yrs experience in Quality Assurance Management and Engineering Management, executed more than 10 projects in Fertilizer, Refinery and Petrochemical industry

Petroleum engineer with 20+ years of diverse experience. 4 years of multi cultural supervisory experience in North Africa. References available on request.

Process design for some of the largest Oil and Gas production systems (offshore/onshore) and pipelines (including Jamnagar Loni LPG) in India have been done directly by me in Engineers India (EIL) or withands on supervision (complete Process Design responsibility from concept to comm. of project).

I am writing to your goodselves wishing a reply to my present request. I would like to apply for the post of Production Operator or any other Board man . I enclose my resume with the name of referees.

Piping Designer

Petroleum Engineer with various and quantifiable exposure in production and reservoir engineering roles. Been involved in both onshore and offshore work environment, mature and new field development, heavy/light oil and gas wells.

Power plant project, O&M professional

Have surveyor, title abstractor, draftsman, networking and landman experience.

Static equipment like vessel, tank and heat exchanger

BS Ceramic and Cement Technology, my experience is working in the field of Refractories and insulation, i have about 12 years field experience.

12 plus years experience in the operation of various Hydrocarbon processing units located offshore (production platforms, and FPSO) and EPC company. My current position is that of Snr. Production Operations Lead with Sunlink Petroleum

corrosion and cathodic protection

Electrical Engineer with sea /offshore experience, familiar with automation, DP courses,PLC control,

Planning, executing & managing large projects involving implementation of Information & Communication Technology systems.

For the past 8 years, I have been working with Abu Dhabi Gas Liquefaction Co Ltd (ADGAS). I am well versed in all the LNG Sales Contracts like Heads of Agreement, Term Sheet, Gas Sales Purchase Agreement, Confidentiality Agreements, Sales and Purchase Agreement for both FOB and Ex-Ship sales.

Ph.D in Safety Engineering, looking simililar job either consultant, or mining, mechanical engineer or any safety related job

18 years experience the Business, Commercial and Supply Chain Strategy and New Business Development for a large range of organisations and business types. Experience in oil & gas and manufacturing (Head of Business Services Brunei Shell).

See resume body

Planning / Scheduling, Project engineering, Subcontracts administration, Primavera, Open Plan,MS Office,Pipeline design/construction/replacement

Objective: I would like to pursue a challenging position in the oil and gas industry working as a development geologist developing oil and gas fields along the Texas Gulf Coast.

Maint Planning, Materials management, warehouse, plant maint, turnaround, project

I am a Mechanical Engineer from Madras University in the year 1981. I have over 18 years of Offshore oil fields experience in production Operations of oil & gas and water injection.

Ph.D in Geophysics, over 12 years industry experience in offshore and onshore seismic 2D/3D data analysis, processing and interpretation

Reservoir/Geoscience Technician

Completion/Workover Supervisor

Oil and gas production, well testing, gas lift wells performance, Gas lifting optimization and automation, Gas sweetening efficiency, improve chemical injection to better water separation and minimize the consumables, giving training of local operators and engineers. Operation and production techno

I am a Chemical Engineer having 10 yrs of valuable experience in various areas of petroleum refining including unit operation, Revamp jobs, Process engineering, Process Modification, PFD/P&ID review, HAZOP study, Safety review, troubleshooting, Advance Process Control, Simulation Studies

Project Controls/Cost Engineering/Analyst

Mechanical Supervisor/technician

Mechanical Commissioning/Start-Up &Generation advisor engineer

Piping supervisor/ Project Manager

An Electrical Engineer having 10+ years of experience in Petroleum & Petrochemical Plants

10 yrs in fuels, postions held operator, supervisor, special projects, op's manager in USA, Iraq & Afghanistan

Experienced in land operations on small and large rigs. Team player. Works well in simultaneous operations to maximize results for the client. Speaks Spanish as well as mother language of English.

I have spent almost of my ten years experience in Petroleum Company that will give me deep knowledge to support my ability. My educational and computer literation background as described below will also support me to do my work.

DCS, PLC, Automation Specialist

A competent Fire Expert, with an extensive Fire & Safety background, and knowledge in corporate guidelines. A proven professional and Technical Communicator with expertise in Loss Prevention, Safety & Fire Protection support, safe work practices, fire systems and design reviews. He has been accounta

Free! Senior marine officer with extensive experience in the offshore oil & gas industry,Currently shorebased marine regional manager

Instrumentation ICSS commissioning specialist

I am a career driven individual with desire and ambition to succeed, grow and develop with a dynamic and professional company like yours, one that can afford good prospects coupled with challenge for professional achievement and satisfaction.

Sr. Designer with Autocad,Microstation, PDMS,AutoPlant, SmartPlant

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 [ 38 ] 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out