Resume - I have 31 years of Technical, Hydraulic Specialist, Fitter experience in S.A Air...

Misco Jobs

Resume #77702

CONTACT INFORMATION:
View contact information...

Application for offshore Hydraulic crew post/ Riggers post

I would very much appreciate a chance to work in the offshore oil industry. Although I am a Qualified Hydraulic Specialist I have done an Off Shore Survival Course, and SAMTRAC through NOSA. I would like to enquire as to the possibility of employment as E.H.S. Officer, or, as part of a Hydraulic Crew or ROV Trainee, or any other position your company would suggest, on one of your offshore installations. I am more than willing and prepared to begin at the bottom and work my way up in your organization. As can be seen by my credentials I am a fast and willing learner.

At present I have no offshore experience and am thus very eager to actively participate in any training course(s) you expect me to attend and complete successfully in order to achieve my goal.

In Short:
I am an easygoing type of person and I get along with most people. I can and will work well under pressure alone or as part of a team. I also do not mind working away from home for extended periods of time. I can be trusted to do my work alone, as part of a team or as head of a team without any supervision. I am conscientious and responsible and can take and effectively carry out orders. I am hard working and I am prepared to undergo any drug test and medical examination your company requires. My past work and credentials indicate that I can be an asset to your esteemed company.

Personal Details
Nationality: S.A. Citizen by Birth
Marital Status: Married. (No dependents)
Language Ability: Fully Bilingual
Health: Excellent
Criminal Record: None
Military: S.A.A.F. 1975 - 1996
Religion: Dutch Reformed Church
Reliable Transport: Motor Vehicle.
Valid licenses: Code A & EC (Prof. Driving Permit: General &
Personnel. Expire 10.06.2009
School: Monument High. Grade 10. 1974

Education & Training Grade 10 & Post School
1. Trade courses and Trade test 02.01.1975 –
27.10.1978: Qualified as Aircraft Fitter
2. Petrols, Oils and Lubricants Quality Control
Completed 29.10.1981
3. Nosa Safety for Supervisors Completed
22.10.1982
4. Nosa Teletuition Safety training Course
1985
5. Senior Technical Course for Non Commissioned Officers 1986
6. Senior Technical Non Commissioned Officers Development Course 1986
7. Quality Management 1986
8. Life Enrichment Course 1988
9. Official Languages Testing Course (Africans & English) 1988
10. Quality Evaluation Course 1990
11. Life Enrichment Course 1990
12. First Aid Course 1991
13. Labour Relations Course for Supervisors 1993
14. Inspection, Preservation and Packaging Course. 1994
15. Aircraft Corrosion Control 1994
16. First Aid Course ?

Decorations and Medals: 1. Propatria Medal
2. Service Medal
3. Long Service Medal Bronze 10 Years
4. Long Service Medal Silver 20 Years
5. Unitas Medal

Commendations: 1. Colours Parade for Freedom of Hopefield
Signed by Mayor Baard 1989.
2. Expression of Thanks by AFB Langebaanweg for Good Service Signed by Col. Labuschagne

Computer Literacy: 1. M.S. Word
2. Excel
3. Internet & Email

Employment History / Job Description:

1. South African Air Force 1975 – 1996.

I. Qualified to work on following Aircraft, Airframe and Engine

Cessna 185 1st Line Servicings.
Kudu 1st and 2nd Line Servicings.
Dakota 1st Line Servicings.
Impala Mk1 Up to and Including 6 Monthly Servicings.
Bosbok 1st and 2nd Line Servicings

Competency for following Tasks on above Aircraft.
a. Marshalling b. Towing and Ground Handling c. Refueling d. Operating of Hobart Starters e. Ground Run f. 1st Line Servicing of Elect. Equip. as fitted to Kudu Aircraft. g. Removal and replacement of Safety Pins on Mk AS 06A Ejection Seats h. Operating and Driving Following Bowsers:
i. Bedford 4x4 4500LT ii. M/Benz 5000LT iii. Man 16000LT iv. M/Benz 26000LT i. Operating and driving Forklifts 3-7 T

Experience Gained in the Following Sections a. Head of Section Flight Line and Flight Line Servicings b. Aircraft Servicing Sections c. Base Aircraft Servicing Section d. Squadron Safety Officer at Air Force Base Langebaanweg for Three Years e. Acting Head of Section for Six Months Air Force Base Hoedspruit Mirage Engine Workshop f. Head of Section Wheel Bay Two Years Air Force Base Hoedspruit.

2. SMC Joint Venture 1997 – 1998
Worked as Hydraulic Fitter on Construction of Saldanha Steel
Assist with Construction of the Continuous Caster Hydraulic Systems including:

a. Hydraulic Pipe work from Hydraulic Room Valve Stands to Ladle Turret, Tundish Turret, Continuous Casting Machine (Segments), Pendulum
Shear, Rollout Table and Dummy Bar.
b. Charging of Hydraulic Accumulators. c. Flushing of Completed Systems. d. Tracing and Connecting of all Hydraulic Pipes to Cylinders, Motors, Pumps, Valves etc. e. Commissioning of Systems
Assist with Construction of Electric Arc Furnace Hydraulic Systems including: a. Hydraulic Pipe Work in Hydraulic Room from Pumps to Valve Stands b. Hydraulic Pipe Work from Valve Stands to Furnace 1 and 2, Roof Lifting Cylinders, Roof Slew Motors, Roof Loosening Cylinders, Roof Elbows, Emergency Hydraulic Panels and Electrode Arm Turret. c. Charging of Hydraulic Accumulators. d. Flushing of Completed Systems. e. Tracing and Connecting of all Hydraulic Pipes to Cylinders, Motors, Pumps, Valves etc. f. Commissioning of Systems. Assist with Construction of Ladle Heating Furnace Hydraulic Systems including: a. Hydraulic Pipes in Hydraulic Room from Pumps to Valve Stand b. Hydraulic Pipes from Valve Stand to Roof Lifting Cylinders, Electrode Arm Turret and Slew Motor. c. Flushing of Completed Systems. d. Tracing and Connecting of all Hydraulic Pipes to Cylinders, Motors, Pumps, Valves etc.

All of the above mentioned installations were done by bending 8mm up to 42mm stainless steel and carbon steel hydraulic tubing as well as installing ½" up to 24" stainless steel and carbon steel schedule piping. All pipe work was done with the assistance of coded welders.

My contract at SMC was ended upon the completion of the Steel Making Side of Saldanha Steel. An American Contracting Company – CBI, did the Iron Making Side of Saldanha Steel.

3. Fluid Flow Contracting up to 15 September 2008

Occupation: Hydraulic Specialist / Sales Manager.

a. As Hydraulic Specialist I did the flushing of the pipe work at the Corex at Saldanha Steel in conjunction with Raur Rine Chemicals for CBI b. As Hydraulic Specialist I did repairs on various Hydraulic Pumps, Motors, Cylinders and Valves directly for Fluid Flow Contracting. These were done in the workshop as well as on site. (The main make names dis- tributed by Fluid Flow are Parker, Vickers, Eaton, Charlyn, Bosch and Danfos, and thus I know them very well.)
c. I visited Industrial Sites to look at jobs, determined what spares will be needed, calculated how long it will take to do, considered safety aspects and all special equipment that will be needed to carry out particular installation or repair. d. Assisted with building of Hydraulic Power Packs and test Benches at Fluid Flow Workshop e. Assisted with planning, developing and manufacturing of a new Accumulation System at Pendulum Shear Hydraulic System at Continuous Caster at Saldanha Steel.
f. Worked on Shut Downs and Breakdowns at all hours of day and night. g. Was head of the day shift working on the repair (reinstall all hydraulic, pneumatic, water and grease pipes) at the Saldanha Steel Electric Arc Furnace Shell 1, after a Burn Through. Also lead the night shift repairing all of the same pipes at Saldanha Steel Electric Arc Furnace Shell 2, after a Burn Through.
h. Made up Hydraulic Hoses from single wire to multispiral hoses. i. Was part of the team Installing new Clay Gun and Drill on Furnace 2 at
Namakwa Sands Saldanha j. Designed and assisted in manufacturing of a Portable Tap Floor Drill for the Corex at Saldanha Steel. k. Modified Grease piping, Hydraulic piping and Water piping on Continuous Caster Segments to ensure quicker and easier changing of Segments on Breakouts and standard Maintenance. l. Was part of a 2 man team installing a 3" Pneumatic line complete with Dryer / Heater at Iron Granulation Plant at Saldanha Steel.
m. Designed 3" Refill line for Oil from Total Bulk Area to Continuous Caster Bulk Tank. (+/- 420m). Engineered Installation, Cleaning and Commissioning of line. n. Designed, contracted outside company for manufacturing, and was part of the 2 man team installing the Bin Opening & Closing Mechanism for
Tail end Bins on Mine at Namakwa Sands Brand se Baai.
o. Overall did various large Hydraulic, Pneumatic, Grease and Water Instal- lations at Namakwa Sands Saldanha, Namakwa Sands Brand se Baai, Saldanha Steel, Duferco Steel Processions, Southern Seas Fishing, Marine Products, Oranje Vis and Saldanha Fish Canning Factory. a. As Sales Manager all Incoming and Outgoing Sales were handled by me. I made sure that prices quoted corresponded with prices on delivery notes. I made sure that deliveries to the Stores were done on or before the dates stated on the clients official orders. I worked closely with the Workshop Manager to make sure that delivery notes for completed jobs went out in time to be signed off by the Client. b. I did Field / Site trips to look at jobs, ascertain what spares will be needed, calculated how long job will take to do, considered all safety aspects and special equipment needed to carry out installation or repair. c. Communicated with Clients to ensure that I know exactly what the client wanted done and made suggestions on how to do work in the Fastest, Safest and most Cost Efficient way. d. Also informed New and Existing Clients on what services and products we could provide them. e. Assisted Store Personnel at times when high volume of equipment was received from Suppliers and booked out to Clients. f. Did Quality Control Inspections on items received. Made sure that items were in sealed containers that part numbers, prices and quantities corres- ponded with order placed with Suppliers. g. Did Quality Control Inspections on items being booked out to Clients. All items specially manufactured by the company was to have Job Number stamped on it, must be sealed in a container, and must be accom- panied by a test certificate where applicable, in the correct quantities. h. Did Quality Control Inspections on items being booked out to Clients. All items received from Suppliers and supplied directly to Clients, were checked against the Clients Order to make sure that correct items, quantities and pricing were received. I also made sure that goods such as pumps, motors, valves and cylinders had test certificates supplied by the Main Supplier. Furthermore, I made certain that all threaded parts were protected. i. I followed up on orders and late deliveries and communicated with Client i.c.w. expected arrival date etc. j. Wrote official failure reports to Suppliers if goods supplied did not conform to standard of quality. k. Attended meetings at Distributors to keep up with latest equipment and procedures. l. Where items could not be obtained from local Distributors, I went on the internet to source goods from other Distributors, both in South Africa and Overseas. m. Sent enquiries to various Distributors / Suppliers to obtain the best Prices and Contracts.

Please Note.
1. All certificates and proof of training mentioned in this C.V. is available on interview.
2. Remuneration will be discussed during interview.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7851 to 7900 of 10848)

Go to Search Parameters...

Brief Description

Master's Degree in Telecommunications Management 3 and a half years of experience Configured Cisco devices Experience in analyzing end-user traffic QoS protocols Creative problem solving Bilingual (Spanish & English)

qualification: B.E (Chemical Engg.) Industrial Training: Cipla ltd. (one month)

Electrical Fitter with experience as a Condition Monitoring Technician/Project Manager since 1994. Highest skill level in Predictive Diagnosis. (Vibration Analysis, Oil Analysis, Wear Debris Analysis, Thermography, Ultrasonic Detection, High Voltage and Low Voltage motor testing).

Formation damage, workover candidate selection, hydraulic fracturing, production optimization, R&D for drilling, completion and production enhancement based on nano-technology, coiled tubing, matrix acidizing, acid fracture, cementing, multiphase flow simulation and programming.

I am a Bachelor degree holder in Computer Information Systems from Ajman University of Science and Technology in Abu Dhabi / UAE 2002 with excellent Analysis, Developing and English communication skills. I feel that I could be very useful to fulfil the work you are doing within your departments.

Present Assignment: Specialist – MTBE Operations Department MTBE Malaysia Sdn. Bhd.(From April 2001 – Till date) (a wholly owned subsidiary of Petronas Malaysia)

Totco Institute of Secretariat Studies .Diploma in Computer Science. Ladoke Akintola University of Technology, Ogbomoso.B Tech in Chemical Engineering Oil and GAs recording Using Oracle Database Programme. Calculation of deferment in Oil and Gas Computation Well Test monitoring and surveillance.

I have worked on oil and gas rigs for 8yrs. I have worked floorhand, motorman, Derreks, asst driller. I know how to work on motors and diesel motors. I know how to weld.

Fully qualified diesel mechanic 10 years exp.(4 years in Oil & Gas) Experience of high horsepower diesel engines, fluid pumps and associated equipment incl. hydraulics/pneumatics & electrical/electronic systems.

Objectives: As a mechanical engineer I am: - seeking an engineer position in oil & gas Industry - willing to get field experience and use gained knowledge in practice - able to study new equipment and technologies - looking for a new career opportunities

Objective: A challenging and rewarding position in a fast-paced, entrepreneurial corporate environment where my leadership and people skills will be utilized to my maximum potential.

Drilling Fluids Research.

Oil and gas exploration consultant with twenty years worldwide experience seeks project, contract, or position

To obtain an entry-level chemical engineering position in the Oil industries sector. Willing to learn and train in harsh condition. Will relocate to anywhere in the world.

C.V Diving supervisor---diving projects rep.

Public Accounting graduated at "Catolica del Tachira" University in Venezuela, Tachira state, bilingual Spanish-English.

I have work in SICPA Inks Pakistan pvt ltd as trainee production officer. Presently I work in Riaz Engineering works as a design engineer.

Objective To have the opportunity to contribute to the efficiency and productivity of a prospective employer.

Research, development, or technical support in organic analytical chemistry, particularly in the area of quality control or quality assurance [in petroleum or petrochemical products]

I have more than 7 years experience as a UNIX Administrator/Engineer. I have a 'make it work' attitude, and the experience to do it.

CV showing details of precious work experience and personal skills

OBJECTIVE Seeking entry level position in the off shore oil and gas industry. Jump start a new career with your company while becoming a mechanical engineer through on the job experience, schooling and hard work.

SUMMARY OF QUALIFICATIONS Excellent writing ability. Independent research skills. Proactive. Motivated. Goal-Oriented.

Objective: To develop the knowledge acquired and apply them in the oil industry, as a Petroleum Engineer.

B Sc. Chemical engineering • Over 3 years experience including in process development

I'm petroleum and Gas Engineer in specilty Development and Exploitation of Oil & Gas fields,taking my degree from Kuban State Technical University Krasnodar Russian Federation in 1999.From this university done 1 year advance course in the same specialty

I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future

Knowledge Of Autocad, Pro-engineer, Catia, Unigraphics, Ideas

An accomplished Software Engineer specializing in Object-Oriented Design and Analysis with extensive experience in the full life cycle of the software design process including requirement definition, prototyping, proof of concept, design, interface implements, testing, and maintenance.

More than one and a half year of hands-on experience in Instrumentation and Project and Sales.

Control & Instrumentation Engineer with 5 year Exp in Detailed Engineering

I'm a geophysicist.

Ph.D. in Metallurgy, Specialist in Surface Treatments, Project Management, International Experience etc.

Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East

Senior piping designer

Turbine tech.

Instrument Engineer with more than 27 years of experience in execution of erection, testing & commissioning/ proposals in the field of Instrumentation Projects for Oil & Gas, Refinery, Petrochemical, Fertilizers and other Chemical & Process Industries.

It is my intention to secure a career in the field of Health and Safety on an oil/gas platform. However, since I am new to the industry, I will consider any position.

B. Eng. Petroleum & Gas Engineering University of Port Harcourt, Rivers State, Nigeria.

I can work floors, motors, and derricks.

I have a very strong back and am not affraid of hard work. I am very punctal

Geology, To be graduated.

BS Chemical Engr. with 15 years onshore/offshore oil/gas production engineering support, facilities planning and design, capital project development and economic evaluation, operations, process simulation/optimization, commissioning, construction and maintenance. Also trained young Saudi engineers

chemist, AUC english course, computer course, 2008 graduation

I have 31 years of Technical, Hydraulic Specialist, Fitter experience in S.A Air Force and on Majour Ind Steel Process Plants. Would like to become ROV operator.

BS Engineering, with 11 years experience in Shell Gas LPG (pak) as Health & Safety Officer/Operations Engineer, came to Canada in 2005, initially in Toronto but relocated in Calgary due to enhancement of my career in Oil & Gas field. In Toronto worked in ITN Food Corporation till June 2006.

Skill: I have worked as Production Shift Supervisor in Gas processing plant from 01-07-2000 to 31-03-2006. Successfully completed Basic Offshore Safety Induction & Emergency Training (OPITO Approved) conducted by MSTS ASIA in Malaysia, Nutec Group. Qualification: B.Sc. Engineer (Chemical), BUET.

More than 2.5 + years of experiences in the field of Planning as a Planning Engg(BE Mechanical Engg.). Analysis of Resource requirement, Performance analysis, Progress measurement, Monitoring & Reporting of EPC deliverables and activities of Pipeline projects

Mechanical Engr: Fabrication works as Mech w/Shop manager ,drawing study,planning,procurement,supervision QA/QC ,erection.

Knowledge & exp. in Electrical and Instrumentation products, in PLC, SCADA and HMI systems, drives, field instruments, Allen Bradley - Micrologix, SLC, ControlLogix, Compact Logix, Flex Logix PLC’s, Panel View Panel view plus Families, in Controlnet, Devicenet, RSView32, RSView SE Redundant

First Prev 151 152 153 154 155 156 157 [ 158 ] 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out