Resume - More than one and a half year of hands-on experience in Instrumentation and Proj...

Misco Jobs

Resume #77713

CONTACT INFORMATION:
View contact information...

Objectives:
I would like to expand my horizons with an innovative, and exciting company, challenging and illustrious career in a competitive environment where I can apply and prove the analytical and technical skills acquired during education. I can work anywhere around the world where I can get experience related to my field. I would like to work for your esteeme company in my field of specialty or a similar Position. I would also like to advance my career and be a productive member of the organization I work for and the society I live in.

Summary of Qualification:
- 10 Months to present experience as Instrument /Sales Engineer..
- 6 Months experience as Trainee Project Engineer.
- 6 Months experience as coordinator technical services.
- Have very good experience in using the computer software related to the technical services and electrical analysis & design.
- Good team worker with strong work ethics. Good skill in resolving any problem in the area of technical services department and project department as well as other related activity.
- A willingness to assume responsibility and to work hard even in harsh environments.
- Abilities to adopt rapidly evolving new technologies.

Qualifications:
2005-07 University of Engineering & Technology Taxila, Pakistan
M.Sc. Electronics & Electrical Engineering (Instrumentation & Control) 70% marks

1999-04 Bright Star University Braga City, Libya
B.Sc. Electronics & Electrical Engineering (Instrumentation & Control) 67.6% marks

1996-99 Al-Tihad Al-Araby, Al-Afreqy School, Libya
F.Sc. 84.0% marks

1993-96 Alzahf Alkdar School, Cyprus
Elementary schooling 86.0% marks

Work experience

February 2008 to Present, RIDA TECHNICAL SERVICES. LIMTED
Working as Instrument/Sales Engineer and is involved in following activities of work,

JOB DESCRIPTION
To perform a wide variety of project and material management related functions to ensure an effective, efficient and smooth running of the Project Department and coordinate with team work, Projects & Planning Departments as per project requirements and general policies set by the management. Specific responsibilities are given below

JOB RESPONSIBILITIES
- Assistant with Krohne Oil & Gas commissioning engineer for leak detection and localization system to be able to test the performances project (10Inch and 16Inch pipeline) for Brega Oil Co.
- Assistant with Krohne Oil & Gas commissioning engineer for custody transfer ultrasonic flow meters IV with pressure and temperature transmitters' project for General Electricity Company of Libya.
- Installation and maintenance of instrument cables 5Pr, 4Pr, 2Pr, 1Pr (pressure and temperature transmitters Yokogawa, gas chromatograph analyzer Yamatake HGC303, for (Komes, Zeletin, Zwitina, North Bengasi) Gecol power plants.
- Generating Engineering Review comments on Construction Documents consisting of Scope of Work.
- I/E Superintendent leak detection Project for Brega Oil Co Responsible for managing, budgeting, maintenance of equipment, and HSE of all maintenance personnel.
- Preparation of complete drawings packages for supply & installation of flow meters for Azzawiya Refinery.
- Preparation of detailed working drawings for supply & installation of flow meters for Azzawiya Refinery.
- Project proposals for the rehabilitation/repair of project.
- To access project requirements from all perspectives i.e. technology, quality, quantity, logistics and costs.
- To maintain the quantity & material list of all items for the project depend on The Specification of the item
- A Supervision of construction and commissioning activities related to the electrical and instrumentation facilities of the project
- Quality check on contractor's scope of supply and installation.
- Sales and Marketing Engineer with M/s Rida Technical Services Ltd. was involved in selling KROHNE, WIKA, OVAL, ALLWEILER Colfax Pump Group (CPG), MILTONROY Franc, EXaL Hartman Technology GmbH Germany, instrumentation to the local petroleum (Oil & Gas) industries & refinery. chemical process industry.
- suppliers/ purchaser's and did budgetary prices, perform invoices, compare prices, delivery options and timings from different suppliers and recommend most suitable sources for procurement to the management.
- Creating request for quotation to our supplier with account our Commission and taxes with arranging the method of shipment.
- Work with customers to develop value added proposals for product and service offerings.
- Create and present product/service presentations to customers.
- My responsibility in the construction sites and planning ahead for construction elements, manpower required, material and equipment needed and the development of plans for mobilization and demobilization as well as recovery plans in case a project is delayed.
August 2007 to January 2008, N.B OILFIELD
Working as Trainee Project Engineer and is involved in following activities of work,

JOB DESCRIPTION
To perform a wide variety of project and material management related functions to ensure an effective, efficient and smooth running of the Project Department and coordinate with Finance, Projects & Planning Departments as per project requirements and general policies set by the management.Specific responsibilities are given below

JOB RESPONSIBILITIES
- To access project requirements from all perspectives i.e. technology, quality, quantity, logistics and costs.
- To liaise between suppliers/ purchasers and the projects department to meet the required product specifications, and compare, recommend and meet the required product specifications and manage on time procurement and subsequent deliveries to project sites.
- To source required materials from local or offshore suppliers according to the required specifications and existing company policies.
- To communicate with suppliers ensuring technical requirements and acquire budgetary prices, Performa Invoices, compare prices, delivery options and timings from different suppliers and recommend most suitable sources for procurement to the management.
- To maintain, organize and populate the material suppliers, vendors contact database, material catalogues, and relevant information.

Spoken Languages:
- English(Fluency in written & spoken)
- Arabic(Fluency in written & spoken)
- Urdu (Beginner level)

Knowledge & Skills:
- Engineering software applications i.e. MatLab, Mathematica.
- C/C++ Programming language.
- Microsoft Office.
- Windows Vista/XP/98.
- Visual Basic 6.
- Networking & information security.
- Human resource database.
- H2S awareness and escape.
- First succor.
- Training courses in national oil establishment in business administration.
- 2nd Category driving license.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7901 to 7950 of 10884)

Go to Search Parameters...

Brief Description

B Sc. Chemical engineering • Over 3 years experience including in process development

I'm petroleum and Gas Engineer in specilty Development and Exploitation of Oil & Gas fields,taking my degree from Kuban State Technical University Krasnodar Russian Federation in 1999.From this university done 1 year advance course in the same specialty

I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future

Knowledge Of Autocad, Pro-engineer, Catia, Unigraphics, Ideas

An accomplished Software Engineer specializing in Object-Oriented Design and Analysis with extensive experience in the full life cycle of the software design process including requirement definition, prototyping, proof of concept, design, interface implements, testing, and maintenance.

More than one and a half year of hands-on experience in Instrumentation and Project and Sales.

Control & Instrumentation Engineer with 5 year Exp in Detailed Engineering

I'm a geophysicist.

Ph.D. in Metallurgy, Specialist in Surface Treatments, Project Management, International Experience etc.

Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East

Senior piping designer

Turbine tech.

Instrument Engineer with more than 27 years of experience in execution of erection, testing & commissioning/ proposals in the field of Instrumentation Projects for Oil & Gas, Refinery, Petrochemical, Fertilizers and other Chemical & Process Industries.

It is my intention to secure a career in the field of Health and Safety on an oil/gas platform. However, since I am new to the industry, I will consider any position.

B. Eng. Petroleum & Gas Engineering University of Port Harcourt, Rivers State, Nigeria.

I can work floors, motors, and derricks.

I have a very strong back and am not affraid of hard work. I am very punctal

Geology, To be graduated.

BS Chemical Engr. with 15 years onshore/offshore oil/gas production engineering support, facilities planning and design, capital project development and economic evaluation, operations, process simulation/optimization, commissioning, construction and maintenance. Also trained young Saudi engineers

chemist, AUC english course, computer course, 2008 graduation

I have 31 years of Technical, Hydraulic Specialist, Fitter experience in S.A Air Force and on Majour Ind Steel Process Plants. Would like to become ROV operator.

BS Engineering, with 11 years experience in Shell Gas LPG (pak) as Health & Safety Officer/Operations Engineer, came to Canada in 2005, initially in Toronto but relocated in Calgary due to enhancement of my career in Oil & Gas field. In Toronto worked in ITN Food Corporation till June 2006.

Skill: I have worked as Production Shift Supervisor in Gas processing plant from 01-07-2000 to 31-03-2006. Successfully completed Basic Offshore Safety Induction & Emergency Training (OPITO Approved) conducted by MSTS ASIA in Malaysia, Nutec Group. Qualification: B.Sc. Engineer (Chemical), BUET.

More than 2.5 + years of experiences in the field of Planning as a Planning Engg(BE Mechanical Engg.). Analysis of Resource requirement, Performance analysis, Progress measurement, Monitoring & Reporting of EPC deliverables and activities of Pipeline projects

Mechanical Engr: Fabrication works as Mech w/Shop manager ,drawing study,planning,procurement,supervision QA/QC ,erection.

Knowledge & exp. in Electrical and Instrumentation products, in PLC, SCADA and HMI systems, drives, field instruments, Allen Bradley - Micrologix, SLC, ControlLogix, Compact Logix, Flex Logix PLC’s, Panel View Panel view plus Families, in Controlnet, Devicenet, RSView32, RSView SE Redundant

Microcontroller Application, Interfaces Application - PLC (SCADAPACK,OMRON,GE Fanuc, etc), ADAM RTU,EXPERT Module,Flow Compute (OMNI,Sybertrol,AutoExec), Compact PLC (MOXA ioLogik)

Skills: semi skilled fitter & turner, horizontal boring mill, veritcal borer, central lathe, fitter, oilmaker, piefitter, milling machine. I will be finishing my N2 early March to be qualified.

I am very much interested in Oil Gas Exploration.

I've studied chemical Engineering. I passed some curses in drilling fluids, well log, zagros formation studies, and also water treatment

I am a female geologist who is currently doing my masters in geology. I finished from the University of Port harcourt, rivers state In Nigeria. I am a team player and still able to work independently with minimum supervision.

More than three (3) years experience in Mechanical Engineering in offshore/ onshore Oil and Gas Production.Application of Incident and Injury free approach in project, HAZOP study in project.

Chartered Accountant with three years experience in Oil and Gas Industry

I would like to work with a company that is well established and stable.. I enjoy working in the Oil & Gas Industry because of the people I have meet and worked with...I want to learn more about different aspects of the Industry and look forward to moving up with a good company.

8+ years in the field of Cost Analysis (Estimation & Cost Control Function) for Refineries, Petrochemical Complexes, Oil & Gas Pipelines / Terminals and Fertilizer Projects

I work at present servicing a fuel storage depot as a Maintenance Electrician, Leading Hand. I have 6 years experience of this type of work and many specialised qualifications in this area.

Situations that may be transformed to improve define the main objective of my professional profile, problems that demand critical analysis, evaluation of variables, and proposition of novel solution strategies to overcome them. I am much motivated, well prepared, and ready to learn more everyday.

Mechanical engineer B.Tech. 6 yrs experience.(UAE) exp in dealing with contractors, sub contractors etc , contacts with major oil companies like adco,etc in UAE, excellent knowledge of UAE market .

can apply any job which you think I am fitting for

I am looking for a job in Oil Industry. I'm willing to "Hard work" and work with "Any entry level position" with your concern. I certainly would appreciate it very much if you could give me an opportunity in your company. I am confident of doing a good Job with your concern.

B.Tech/MBA,Total 5 + years experience in Mechanical & Construction Sectors. Working as CONTRACTS ENGINEER (Planning/Estimate/Proposal/Qty’ Surveyor) in M/s CAPE EAST LIMITED CO (W.L.L), DOHA, QATAR.

Chemical Process Engineer, Aspen Plus, HYSYS, MATLAB, CHEMCAD, Reviewing PFD, P&ID, Design Specifications

I m Final Year Student of Mechanical Engineer and will be pass out upto december 2006. I want utilize my knowledge and skills for an organization, which offers opportunities for personal growth and career development.

Icorr paint inspector/rope access technician

Experice engineer with project engineering and project managemnt

Mechanical Engineer

working in Ras gas - qatar as an instrument technician with 14 years experience. good knowledge in process instrumentation. good experience in yokagawa CS3000 and Foxboro I/A series Dcs. having diploma in electronics and telecommunication. pls see attached resumes for more details.

To continue employment in the field of oil & gas operations. I will bring dedication, good work ethics, and teamwork to your company.

Hard Working, faster to learn, Capable to working by individually or as a team and Capable to working in any different area

All qualifiations are posted on my resume exept that i have a passport.

First Prev 151 152 153 154 155 156 157 158 [ 159 ] 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out