Resume - -Primavera (Deep knowledge and experience) / SAFRAN planning program / AutoCAD 2...

Misco Jobs

Resume #77788

CONTACT INFORMATION:
View contact information...

Personal Data:
Date of Birth: 31 March 1975
Nationality: Egyptian
Marital Status: Single
Education: B.Sc. of Civil Engineering 1999, Cairo University
School: The Holy Family School – Helwan.
Language Skills: Arabic: Mother tongue
: English: Fluent / French: Good

Objective: Senior Planning Engineer in large scale projects (Power Plants / On-shore & Off-shore Oil & Gas / Industrial)
Computer Skills:
-Primavera (Deep knowledge and experience)
-AutoCAD 2-D (Professional use)
-SAFRAN planning program.
-Workable knowledge with SAP2000 & PDMS.
-Microsoft Office Programs.
Job Qualifications:
Construction / Commissioning Planning Engineer:
- Preparing, Updating & Following up the planning schedules for engineering / manpower / materials / fabrication / delivery / construction & commissioning activities using Primavera & Excel programs.
- Monitoring progress, productivity & preparing the Weekly, Fortnight & Monthly Reports.
Technical Office Engineer:
-Engineering & Coordination work for civil activities on site (Concrete & Steel structures / Landscaping / under ground networks / Marine work ).
-Preparing, Review and Issue Workshop drawings for Steel & Concrete Structures.
-Preparing, Review and Issue the Bill of Quantities (B.O.Q.'s).
-Solving Technical problems on site through R.F.I.'s / N.C.R.'s / D.M.R.'s).
-Workable knowledge with International Standards.

RECORD OF PREVIOUS EXPERIENCE:

June 2008 to Present, SICIM S.p.A. – Kazakhstan.
Technical Office / Planning Engineer for KASHAGAN DEVELOPMENT EXPERIMENTAL PROGRAM project – under ground network facilities (SICIM scope).
DUTIES:
-Following up the Fabrication, Construction progress for the under ground network (Manholes, Catch Basins, Fire Water, Oily Water (gravity & pressurized), Closed Drain,. .etc.).
-Following up material plan and delivery on site.
-Preparing the GA & Co-ordination drawings for under ground network facilities.
-Attending the Weekly / Monthly engineering meetings.
-Preparing & following up the TQ from SICIM to client (AGIP).
-Training SICIM staff for using Primavera program / preparing & updating the schedule / managing the resources & budget / preparing the weekly & monthly reports.

December 2007 to May 2008, MIS – SHARJAH / UAE (Maritime Industrial Services) - (International Petroleum Services Company)
Project Planning Engineer for Construction of Off-shore F & G SUPER M2 JACKUPDRILLING RIG-1 (8000 tons) Project.
DUTIES:
-Following up the Rig Fabrication, Construction & Mechanical Completion (MC) progress for different disciplines (Electrical, Mechanical, Instruments, Piping,...etc).
-Updating the Primavera planning program & preparing the weekly / Fortnight / Monthly progress reports.
-Preparing the Man-hour Histogram, S-Curve & Trend Analysis for all disciplines (Engineering, Procurement, Construction & Commissioning).
-Attending the procurement and production progress meetings.
-Preparing Monthly, Fortnightly & Weekly progress report for all disciplines.
-Managing the budgeted man-hours for the base scope & change orders per job numbers.

June 2007 to November 2007, BP - British Petroleum (International British Petroleum Company)
Construction / Commissioning Planning Engineer for SAQQARA On-shore & Off-shore Project (Alexandria - On-shore for Construction & Pre-Commissioning work / Ras Shukier – On-shore Terminal & Off-shore Installation, Hook-up & Commissioning work).
DUTIES:
On-shore work:
-Following up the Deck Fabrication, Construction & Mechanical Completion (MC) progress for different disciplines (Electrical, Mechanical, Instruments, Piping,...etc).
-Updating the Primavera planning program & preparing the weekly progress reports.
-Attending the weekly and monthly progress meetings.
Off-shore work:
Preparing the Off-shore hour by hour plan for the following:
-Deck lifting & installation activities (equipment, tools, manpower, transportation,…etc.)
-Hook up activities (Production line, Drain caisson, Sea water caisson, Umbilical,…etc)
-Commissioning activities (Electrical, Instruments, Piping, Mechanical,…etc.)
-Production line sub-sea activities (Flooding, cleaning/Pigging, Hydro-test,…etc.).

January 2006. to October 2006, William HARE International British Company – UAE-Abu Dhabi)
Engineering Dept. - Senior Planning Engineer (for Company LNG projects in Qatar & Other projects in the Gulf Countries).
Company Profile: William HARE is one of the large scale international companies specialized in steel design, detailing & fabrication.
Company Projects: W. HARE is the Contractor Company which prepares the connection design, detailing and fabrication for all steel structures in Qatar Gas LNG Onshore project in Qatar, besides preparing the engineering and fabrication for steel structures for other large scale projects located in Saudi Arabia & other countries.
DUTIES:
-Planning work & following up engineering time schedules for W. HARE branches in UAE, India & Manila for above company projects.
-Planning work & Technical co-ordination between William HARE and the client (Technip / JGC / CHIYODA / GEA BTT / Snamprogetti).
-Arranging & Following up the engineering plan with clients to issue IFC documents (Issued For Construction) from Clients.
-Following up with clients the TQ's (Technical Queries) issued from W. HARE.
-Planning & Following up the updating for new revisions and modifications received from Clients.
-Attending the weekly & monthly meetings with the clients to follow up the over all engineering schedule and progress.
-Managing the engineering man power & Expediting work progress in W. HARE branches.

June 2005. to September 2005, CRC (Construction and Reconstruction Engineering Company – UAE-Dubai & QATAR-Doha)
Technical Office Engineer- ( Quantity Surveying & Workshop Drawings) for The company projects in UAE and QATAR.
DUTIES:
-Preparing, Review the Bill of Quantities for Tenders and final B.O.Q.'s.
-Prepare the Price list for B.O.Q.'s.
-Preparation & Review the Formwork and Reinforcement Workshop drawings using AutoCAD program.
-Solving Technical problems on site asked by the Sub Contractors by "Request For Information's" (R.F.I's).

April. 2005 to May 2005, Samsung (International Company - Main contractor)
Technical Office Engineer in the project of the American University in Cairo – New Campus Development.
DUTIES:
-Engineering work for Concrete & Steel structures.
-Preparation, Review and Issue the Formwork and Reinforcement Workshop drawings using AutoCAD program.
-Preparation, review and issue Bill of Quantities (B.O.Q.).

April. 2004 to March. 2005, e.construct (UAE Company specialized in Pre-cast and Pre-stressed concrete).
Technical Office Engineer in e.construct Branch in EGYPT.

PROJECT: Pre-cast Concrete Cladding for Marina Height Towers (220 meter height towers in Dubai).
DUTIES:
-Engineering work for Pre-cast Concrete Cladding Panels.
-Preparation, Review and Issue the Formwork and Reinforcement Workshop drawings using AutoCAD program.
-Preparation, review and issue Bill of Quantities (B.O.Q.).

December. 2000 to January. 2004, " E.D.F. Electricité de France
( International French Company ), ( The Owner ) "
Technical Office/Q.S. Engineer in "Suez Gulf gas - fuel fired power plant 782 MW, 330 Million Dollar (During Construction, Commissioning and Warranty period).

DUTIES:

-Engineering work for Steel structures in the Boiler Units, Turbine Hall Building, Electrical & Pipe Racks and Steel access Platforms.
-Preparing Steel Workshop Drawings Using AutoCAD program.
-Review Erection drawings for Steel Structures.
-Preparation, review and issue Bill of Quantities (B.O.Q. list) for Steel Drawings.
-Solving Technical problems on site asked by the Contractors by "Request For Information's" (R.F.I's) or "Non Conformance Records" (N.C.R.'s).
-Preparing Concrete Formwork and Reinforcement Workshop drawings.
-Review construction drawings.
-Preparation, review and issue Bill of Quantities (B.O.Q.) for Concrete Drawings.
-Geometry, Leveling and Coordinates of location for internal & external access roads.
-Update the Under Ground Network & Standards.
-Work Using PDMS program to make the 3D model for the Guide Drawings for Buildings.
-Making Download, Printing and Filing for all the project drawings and documents received by Email.

August, 2000 to November 2000, KAHROMIKA – Egyptian company
Technical Office Engineer in BENI-SUEF Cement Plant.

DUTIES:

-Engineering work for Clinker Grinding Steel structures.
-Preparing Steel Workshop drawings using AutoCAD program for:
* Main Columns.
* Main Girders.
* Floor Beams.

November 1999 to July 2000, OSMAN GROUP – Egyptian Company
Technical Office Engineer in Dream Land Project – Villa Apartment.

DUTIES:

-Preparation and Review the Workshop drawings for Concrete dimensions, Reinforcement, Brick work, Wet finishing and As Built using AutoCAD program.

August 1996 – July 1997, ARAB CONTRACTORS (Egyptian Company)- Consulting Engineering and Technical Services (CETS).
Assistant for Quality Department Manager during preparation for ISO 9001 Certificate.

DUTIES:

-Preparation for ISO 9001 documents for all departments.
-Preparing Official Forms to arrange work between the different departments.
-Supervise and Check that all the departments are work according to the ISO documents issued from the Quality department.
-Update the ISO documents according to any changes in the Quality system in each department.
-Filling for all documents of ISO system.

August 1997, ARAB CONTRACTORS – Egyptian Company
Trained as Site Engineer In the project of EL-Mouneeb Bridge.

July 1995, ARAB CONTRACTORS – Egyptian Company
Trained as Site Engineer In the project of Helwan University.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5351 to 5400 of 10924)

Go to Search Parameters...

Brief Description

Experienced workover rig driller looking for international or domestic work as the western Canadain oilfield has slowed down. I am hard working, a quick learner and very adapable to new surroundings. As you can see from my resume, I am a dedicated and loyal employee as well.

Skills include Lease Negotiations, farm ins and farm outs, JOAs, Oklahoma Corporation Commision forms and requirements, Pooling Orders, Division of Interests, Due Diligence, Title Curative, Ownership Reports.

Qualifications & Skills: Title Runsheets, Lease Take Off's, Ownership Rpts., Lease Acquistions and Due Diligence

structural drafter or designer, preferably on the offshore indestry.

I am looking for a career within a company that promotes from within and encourages continuous learning as well as where my enthusiasm, drive and knowledge will be a valuable asset.

Skills- Creative and Innovative, Good Communicative Skills. Ability to Work under Pressure. Ability To Mobilize And Supervise People. Strong in Team spirit. Microsoft Office software and the Internet, , Qualificatiions- Higher National Diploma (HND) in Insurance (Lower credit), 2007.

Instrument design wihin oil and gas industry. Using Intools and CAD packages.

I have been working for 6 years on inland drilling rigs. I worked my way up to driller last year & have 4 years exp. as a derrickman.

Senior Cased Hole Wireline Engineer

Welding Inspector/Trainer/Supervisor

Deepwater Completion engineer

Master Electrician

Over 25 years experience in the pipeline construction industry. Positions held range from heavy equipment operator, superintendent, foreman, & utility inspector. Qualifications listed with ISNetworld, OSHA Safety certifications

11 years of experience in Project Cost Control on Saudi Aramco Projects in Saudi Arabia. Presently working for Saudi Aramco thru secondment.

+16 yrs of experience in EPC/PMC, TPI Quality control & in Construction Companies. Having well experiences for various stages wise Inspections involving Pressure Vessels, Storage Tanks, A/G & U/G Piping & Structural Steel Works. (ONSHORE & OFFSHORE).

Comprehensive drilling experience of 11+ years in various locations worlwide with E&P Operators. Four years experience as Drilling Supervisor offshore Thailand and Gulf of Mexico. Seven years Drilling Engineering experience onshore and offshore, includes day to day rig operations management.

Production Technology, Completion Engineering, Well Testing, Nodal Analysis, Flow Modelling & Production Optimization

20 years Materials Controller / Coordinator

Sr. mechanical/construction engineer

Over fourteen years of experience in Detail / Design, Supervision and Drafting of plant layouts, piping systems for onshore oil and gas facilities, refineries, pipelines, power & sugar plants and industry utilities.

Qualified Boilermaker/ Welder, with over 25 years experience, mostly on mines and construction.

Dynamic 12 years of professional experience, with 8 years pioneering in the field of Oil and Gas business. HSSE training of company personnel, HSSE master plan implementation, auditing and recommending system updates according to company needs and international legal requirements

I am willing to work as hard as I have to in order to make a specific position work for me.

Petroleum Engineer with 11 years working in Subsurface Services with solid knowledge and field experience in Water Control Technologies, Squeeze Cement with Coiled Tubing, Coiled Tubing, Snubbing , Wire Line, Logging, Well Abandons and Stimulation Jobs. Bilingual Level English - Spanish.

Chemistry, Physics and Calculus Educator/trainer. Native Spanish speaker.

Oil & Gas operation technician (Gauger) in OM&S (Oil Moments and Storage).

SUMMARY Professional Manager with real life experience in business management and successful sales specific to Russian and East European business marketplaces. Experience in working with remote corporate resources. Highly-motivated, energetic team player available for extensive travel.

Challenging position in the Engineering field, in an organization, where I can Contribute my strong analytical and troubleshooting skills and experience in Machinist, Designing and CNC Programming along with the outstanding Interpersonal skills and grow professionally.

I have 12 years of experience in oil and gas field operations. I've handled various responsibilities from exploration stage of field to upgradation of production to 65000 BOPD. Attached below is resume.

Over the past 14 years in the oil industry i have worked from ground up on drilling rigs. roustabout , floorhand ,motorman , derrickhand , driller , and my past employment for the past 4 years has been operations superintendent with duties pertaining to drilling ,workover and production.

Industrial Engineer, specialization in Environmental Engineering. 12 years experience in the Environmental area and oil and gas sector, as an advisor and as HSE Manager. Large experience formulating CEMPS, EIA, Audit programs, etc., and managing HSE budgets.

CHEMICAL ENGINEER with twelve years experience in production/process/project engineering. Looking for Project Management/Senior Project Engineering position either in the USA or Overseas [Preferably Africa].

Fundamental and technical security analysis, fixed income, financial statement analysis, accounting, budgeting, portfolio construction and asset allocation, econometric analysis, financial and statistical data modeling and forecasting, risk management, project management.

Above 12 years experience in the process Industry. Conversant with software packages like windows, Hextran, PI, Lims, Simulator and BAAN. Worked in various capacities in the operation of Petrochemical operation. Loading, Sulfiding and technical support to refinery unit operations

SUMMARY: Strong foundation in oil and gas, mining and environmental geology, in industry and national laboratory setting.

Basin modelling, organic petrography, sequence stratigraphy, x-ray diffraction, 2D seismic

Looking to contribute to the success of a company with my experience, hardwork and dedication to work as a team and make a difference preferably working on Petroleum, Gas or Cargo ships or Oil Rigs

I can work in supply boats, service ship and bunker ship

Around 12 years in the field of Instrumentation and Control System in Olefins Gas Cracker, Petrochemical and Copper Smelter & Refinery Sectors.

"Seeking Professional and Challenging career in Oil/ Gas/ Refinery/ Petrochemical sector. Offer extensive Field experiences in Maintenance/ Shutdown/ Commissioning/ and Construction of Plant and Rotary / Static Equipment”

8 yrs.exp in the commissioning and operation of gasturbines, boilers & all other utilities in a big power plant and fertlisers company

Automotive and Locomotive Mechanic - Knowledgable and Reliable

HR Generalist with 14 years of experience

14 years of experience in managing all phases of Operations, including purchasing, inventory control, transportation, budget preparation and execution, staff development and regulatory compliance. Experience held in manufacturing, Oil/Gas, transportation and chemical industries.

-Primavera (Deep knowledge and experience) / SAFRAN planning program / AutoCAD 2-D (Professional use) /

Proactive HSE expert with 13+ years expertise encompassing HSE in Oil and Gas Construction; accustomed to project Management and coordinating resources effectively to achieve targets within often stringent constraints. Energetic, dynamic, relishes challenges and demonstrates indepth analytical Skill

Working as a Sales engineer in a well established LLC. It’s a 20 years old company which deals with Instrumentation, Automation, Compressors, Air Operated Pumps, Valve Automation, Pneumatic Tools, Transmission Products and Material handling.

HSE, Risk Assessment & Loss Prevention Engineering in Oil & Gas Field

I had a diploma of INTERNATIONAL WELDING ENGINEER in central metallurgical researches and development institute under certification of IIW (international institute of welding). Certificate no IWE AT 0708.. I worked in EMEC as a Drilling fluid Engineer in syria from 3/2009 till now.

BE Mechanical, Good surveying and project management skills, Sales and Marketing

First Prev 101 102 103 104 105 106 107 [ 108 ] 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out