Resume - BE (MECH ) PIPING DESIGNING & STRESS ANALYSIS

Misco Jobs

Resume #77856

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVE:

To build career in a challenging environment headed by dedicated people, committed to the cause of the sector, and the society at large, which will help me to explore myself to the optimum.

Specilation:

PG- Diploma in Piping Designing and Stress Analysis
2008
Praginsys
Grade " A"

EXPERTISED IN
Piping Designing
Piping Detailed Engineering
Piping Lay outing
Piping Stress Analysis
Stress Analysis Software CEASER II

CAPABALITY
„± Experience in Piping Design and Field Engineering Works of various Petrochemical, Oil and Gas Plants
Mechanical system engineering and preparation of P & I Diagrams for power and chemical and Petro-chemical, WATER, OIL project piping system.
„± Sizing of critical and non-critical piping including pressure drop calculations.
„± Preparation of piping schedule, valve schedule, instrument schedule and insulation schedule
„± Sizing and selection of pumps, control valve, safety valve, steam traps etc.
„± Selection of expansion bellows.
„± Piping material selection and preparation of piping specification.
„± Selection of valves for various applications.
„± Preparation of overall plot plan and unit plot plan.
„± Preparation of equipment layout plan and elevation.
„± Preparation of piping layout.
„± Preparation of BOM for the piping systems.
„± Piping stress analysis and code calculations.
„± Piping support engineering.
„± Preparation of isometric drawings with BOM.
„± Inspection services for piping system components.
„± Preparation of tender specification for piping system erection and commissioning.
„± Supervision of piping system erection and commissioning.
„± Trouble shooting of piping system problems.
„± Process and instrumentation drawing design
„± ASME B31.1 and B31.3 piping code application
„± Piping and component specification
„± Piping stress analysis
„± Construction field services Basic, conceptual & detailed piping design of all onshore projects both with EPC contractor
„± capable of checking related information's drawings which include pipe support design, MTO check, isometric checking by considering some of references such as P&ID/UHD/PFD/Plot Plan and other Information
CAESAR II: Flexibility & Stress Analysis of complex Piping system as per ASME B31.1, iepc 31.3, 31.4, 31.8.
* Piping Stress Analysis (Piping Flexibility Analysis) using CAESAR II
* Analysis IBR steam Lines.
* Detection of causes of leakage in existing piping systems.
* Detection of causes of vibration in existing piping systems
* Review of pipe stress calculation as a third party
*

Coordinate and interface with other discipline and deals project carefully to complete at required schedule and capable of working different kind of people.

Project Real Working & Training Experience from:

INDO ENGINEERING PROJECT Corporation (IEPC) is one of the world's best qualified engineering, procurement, construction and maintenance services organizations. iepc is a Authorized consultant of BHEL and International organization, iepc having more than 500 satisfied customers all over the world. Iepc has an objective to develop, execute, and maintain capital projects safely, on schedule, within budget and with operational excellence. There dependability and expertise distinguish iepc as an outstanding leader in the global market and services are not limited to the following, Power, oil and gas, petrochemical, environmental protection, industrial, civil, building, housing, feasibility study, epc service, project management, operation and maintenance.

Duties/Responsibilities

* Preparation of conceptual routing and layouts as reference for piping detail design
* Preparing engineering design of piping systems related to the assigned projects including plot
* Piping layouts as per applicable industry standards, codes and company regulations.
* Exposure to isometrics, layout, plot plan
* Carrying out piping stress analysis using Stress Analysis software CEASER II ( 5.0 VERSION) when ever required.
* Reviewing and approving specifications, calculations and design drawings prepared by the engineering contractor related to piping system plot and equipment layout.
* Reviewing, checking and approving design calculations and drawings submitted by the vendors after placement of order.
* Selection of the best suitable pipe support for the load and movement of the pipeline.
Designing of Clamp and Pipe base details.
Preparation of Bill of Material.
Internal Quality member.

* Review, preliminary and final checking of isometric drawings done -Checking of related information such as loading data of Structure/Sleeper, Equipment Nozzle Orientation, Pipe Support Location, Platform and Support Clip Information and other related drawings.
* Participate in Site Survey if necessary

EDUCATIONAL PROFILE

Examination University/Board Percentage
B.E.(Mechanical) R.T.M.N.U, Nagpur 56.51
H.S.S.C Maharashtra board 54.67
S.S.C Maharashtra board 72.4

PROJECT OBJECTIVE

Project Title:

Project Overview:

Description:

Optimization of Cost using Process Capability.

Analyzing defectives using various process capability methodologies to reduce defectives and optimize cost.

In this project we selected a particular part (Cylinder Head), studied about the most important process critical operation. We analyzed defective parts and various costs associated and made use of various process capability charts to improve the product and optimize its cost. We conducted a number of visits to the Agrofab industries Pvt. Ltd, Nagpur to perform our project.

CO-CURRICULUM ACTIVITIES:-

Industrial Case Study:

Computer Skills:

Launguages:

Operating Systems: Agrofab Industries Pvt Ltd, Midc, Nagpur.

AutoCAD (2-d) & Unigraphics(Beginner level), MS Office.

C, C++

Windows 2000/XP/Window98

PERSONAL PROFILE

Male

Single

01-11-1983

English,Hindi

Optimistic and Punctual

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6201 to 6250 of 10902)

Go to Search Parameters...

Brief Description

MSc GEOLOGY, RESEARCH WORK IN ELECTRICAL RESISTIVITY METHOD IN GEOPHYSICS FIELD

B.E.(Chemical), 6 years of experience in offhsore oil and gas platform of which 3 years in control room.

Over 9 years experience in Instrumentation & control in Chemical, Power, Cement, Sugar & Petrochemical industry

I have worked in Pre-Commissioning, Commissioning, Normal running Plants. In India and Abroad, both places I have worked. I have worked in Chemical, Fertilizer and oil and gas industry

QA/QC Inspection, Fabrication, Installation, Facilities Upgrade etc.

Special Skills in DCS Operations

SAP SD functional cons. resume total 6 yrs exp 3yrs in SAP SD+ IS OIL functional consultant

Medical support to clients operating in remote or hazardous and offshore environments worldwide. Maintaining adequate medical facilities. Providing services such as First aid training, Health and safety checks and enforcing the companies HSE plan, and ensuring a safe working environment.

Mechanical, Automotive, Project, Calibration, Engineering, Production

Instrument technician

I am working as safety officer at Aramco Saudi Arabia for more than 6 years. I am interested to work in your country. Please arrange my telephonic interview and if you need further documents please inform me on my email.

Operation and Maintenance of Utilities, Project Management, Energy Management, Six Sigma and IT applications

In Indian Naval Hydrographic Department, I have worked in various organizations of Naval Hydrographic Department at various capacities including survey assignments onboard ships, National Hydrographic Office as Quality Controller/Quality Assurance member and National Hydrographic School as Hydrograp

15 year career of Document Management and Control. Assisted in the development and implementation of EDMS. Held over sea positions in various European locations, Middle East and Asia. Conversant with International standards, guidelines and regulations.

A Nigerian. Qualified and experienced geoscientist with 5+years cross-functional experience.

To offer services as Senior piping designer for onshore and off shore oil and gas projects by using PDMS & PDS 3d model system

Process Engineer 10 years O&G + Mining Experience, Global leader in BR&E Promax process simulation, Gas Dehydration, Water Treatment (both produced water and seawater injection), hydrocyclone, flotation and filtration technologies. Comfortable from the Pre-FEED level down to the nuts & bolts.

Fourteen years of experience in Office Administration, Procurement, HRD, Public Relation and Sales Coordination has energized me to seek suitable position in renowned companies. My quest is to further broaden my horizons so as to facilitate better opportunities to serve &better objective to achieve

Responsible for business development of company & for recruitment of professionals like Project Managers, Engineers, &Technicians for Engineering, & Construction industry in India, Middle East, ,etc.To develop and manage our own portfolio of clients and source the most suitable candidates .

International Weldig Engineer (IWE) , CSWIP 3.1 and Level II(two) Pt,Mt,Ut and RT

Degreed in occupational safety and health, 18 years experience in construction safety, sveral yrs. Overseas exp. Working with multi-national staff. Excellent medical background

I am a practicing Health & Safety professional and I have built substantial experience as an HSE Advisor with various organizations onshore, offshore and internationally.

A highly qualified and experienced marine engineer, with extensive experience on LNG ships. Skilled in all management roles and function including IT. A skilled problem solver who takes general overview and generates viable solutions.

Experienced Industrial Structural Engineer - concrete, steel - 20+ years, UK & US codes

HSE Manager/adviser with 25+ years experience with large multi-national corporations. Developed successful top quartile HSE/Safety programs on 4 continents. Expert in HSE management, risk assessment, and HSE/safety auditing techniques.

Exceptional performance as a Senior Process and Production Engineer for major industrial, polymer, refining, and specialty chemical manufacturing companies on the Texas Gulf Coast.

U.S Navy Aviation Gas Turbine Jet Mechanic

-A team player, flexibile, detail-oriented, and self-motivated

Working as a CNC Lathe machine operator from 04/11/2008 to till date in L&T Plastics Machinery Limited(Injection Molding).,Chembarambakkam, Chennai .

Acquisition and title research

Over 11 years of SAP BW BI experience as a developer, Lead and Manager

Diploma In Mechancial Engineering+NEBOSH Level-3+Environment, Health and Safety Management Specialist Certification from NASP of USA+ ISO 14001:2004 & 9000:2000 Certified Lead Auditor with 15 Years Experience in Oil&Gas as HSE Advisor/Engineer/Supervisor/Coordinator/

I have more than 15 years experience in the field of process control instrumentation and analyzers and have many related field trainings from abroad and in Pakistan. I am forwarding my personal profile for your consideration.

Draftsperson - coil tubing downhole tools, coil tubing wellheads, etc

Engineering experience since 1999 in diversified electrical, instrumentation, automation, and industrial computer applications, generally related to Oil & Gas Industry, Steel, Automotive, Aluminum, Process and Machine applications.

Experience Derrickhand

Project Expeditor

Mechanical Engineer Professional experience of 35+ years in Engineering and Project Management

AutoCad drafter

Piping Designer – 3D Modeling - PDMS - Microstation - Plant Space – 3DM - Auto-CAD

I have a 4 years degree in geology with a relevant experience as wellsite geologist. Actually I have witnessed more than 30 horizontals wells drilled and 10 verticals one's.I can say that I have gained a great knowledge of how to solve drillings problems when they occur.

Having more than 9 years of experience in petrochemical, oil & gas process plants and utilities. Having experience in commissioning, pre-commissioning activities in Field, DCS & SCADA. (FOXPORO & Emerson Delta-V Systems)

Key specializations: GE Turbine control systems- MKIV, MKV, MKVI, GE excitation systems- busfed, potentialand compound source, SVR, rotating DC, brushless, EX2000, EX2100, Load commutated inverters (static start), electrical and generator protection. DLN 1.0, 2.0+, 2.6 systems, versamax PLC, genius

BE (MECH ) PIPING DESIGNING & STRESS ANALYSIS

Well Engineering skills

Autocad drafter designer

I am a fully qualified derrickman and have been working offshore for the past 9 years.

I have learned Software : Pipesim 2000, Caesar II, Microsoft Office, Power Point, Autocad 2D

I worked as mud engineer for 2 years in Indonesia and now I am solid control engineer and I am running a job for Drilling Project in Libya

33+ years in the oil and gas service industry. His portfolio includes (but is not limited to) field operations and supervision, sales, marketing, business development, and management.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 [ 125 ] 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out