Resume - A dedicated professional with excellent technical, management and inspection ski...

Misco Jobs

Resume #78070

CONTACT INFORMATION:
View contact information...

OBJECTIVE
My objection is to obtain a rewarding and challenging career through the knowledge, experience, education and skills acquired in the military, the workforce and online training.

EXPERIENCE
December 2006-Present Evoniks Engineered Carbons,
Borger, TX
Process Technician
Perform duties associated with the operation of a production unit which includes inspect and monitor all mechanical equipment; provide maintenance to insure the safe and accurate operation of a unit.
Possess craft skills needed to repair and maintain plant equipment and utilities necessary to the production of carbon black; detect and report faulty equipment.
Utilize Quality Management Systems skills (statistical process controls, problem solving) to help identify opportunities and summary production unit problems.
Actively participates in plant safety programs.
Setup and operate various machines and mobile equipment.

July 2002-December 2005 Pacific Architecture and Engineers Rhein-Main Air Base, Germany
Base Fuels Operations Supervisor
Provided positive quality control for 9 million gallons of aviation fuel.
Provided technical leadership and supervision to base fuels laboratory and fuels operation technicians.
Managed real property, vehicles and equipment assigned to fuels section.
Implemented standard operating procedures for certification of ISO 9001: 2000.
Maintained mechanically and technically, the fuel dispensing facilities at both war-time and peace-time.
Ensured the proper use and care of base fuels laboratory, base service station. 12 facilities and pump rooms, 25 pumps, 15 filter separators and other petroleum related equipment.
Responsible individual for over $2,332,000 in Air Force equipment.

October 1999-July 2002 Pacific Architecture and Engineers
Rhein-Main Air Base, Germany
Compliance-Laboratory Technician
Performed quality control tests to determine water, solids, color filtration time, fibers, fuel system icing inhibitor (FSII), conductivity level, gravity, flash point and cloud point.
Tested aviation and automobile fuel for composition, purity, density, and miscibility.
Performed routine quality control procedures on bulk fuel facilities, fixed vessels, refueling units and aircraft-sumps.
Maintained quality, safety and cleanliness standards in compliance with ASTM standards and United States Air Force regulations.

June 1995-September 1999 ITT Federal Services
Rhein-Main Air Base, Germany
Base Laboratory Technician
Performed tests for quality control of liquid and gaseous oxygen used for aviators breathing oxygen.
Performed odor and particulate tests on storage tanks and aircraft servicing carts, in compliance with ASTM standards and the United States Air Force guidelines.
Prepared all documentation for the sample shipment of liquid oxygen (Lox) to area laboratory located at Mildenhall Air Force Base, England.
Serviced, repaired and inspected liquid oxygen cylinders for use in aircraft life support systems.
Maintained all required maintenance, repair and safety documents for all equipment and tanks as well as the maintenance of all daily and monthly aircraft servicing reports and sample shipment results.
Performed handling and transferring of liquid oxygen and liquid nitrogen (Lint); serviced and inspected liquid nitrogen carts.

EDUCATION
1980 Graduate
Borger High School, Borger, TX
2007-present Chemical Operators Course
Washington State Community College
9/2007 - 12/2007 Intro to Chemical Operations
Washington State Community College

PROFESSIONAL
TRAINING
9/2007 - 12/2007 Intro to Chemical Operations Certificate
Washington State Community College
10/2005 - 10/2005 Business Management and Strategy Course, Industries-and Commerce
Mainz, Germany
4/2005 - 7/2005 Basic Business Course
Rhein-Main Air Base, Germany
8/2001 - 8/2001 Hazardous Waste and Material Course
U.S. Air Force, Rhein Main Air Base, Germany
1/2000 - 2/2000 Petroleum Quality Control Journeyman
U.S. Air Force, Sheppard Air Force Base, Texas
Rhein- Main Air Base, Frankfurt, Germany
4/1991 - 5/1991 Primary Leadership Development Course
U.S. Army Noncommissioned Officers Academy
Baumholder, Germany
10/1986 - 12/1986 Petroleum Supply Course,
U.S. Army, Fort Lee, Virginia

REFERENCES
UPON REQUEST

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5601 to 5650 of 10817)

Go to Search Parameters...

Brief Description

Draftsman first, Millwright, always!

30 yrs. experience in equipment maintenance, operation, and supervision. Expertise: Supervision, planning, cost control, record keeping, PM scheduling, maintenance and repair (electric, diesel, gas), Hydraulics, Pneumatics, Pump and dewatering systems, Milling.

I'm employee in Jordan Petroleum Refinery Co, I am working in main work shops as technical " ability design & fabricate all kinds of gears As helical, bevel, spur & worm gear" , ability using lathe machine & other production machine.

I am a drilling engineer, I develop, plan, cost, schedule and supervise all stages of well-drilling from the initial well design to testing, completion and abandonment. My Typical work activities include: designing; undertaking casing design; drawing up the drilling programme.

Reservoir Engineer with 10 years experience. From 1993 to 2000 I worked in SOCAR(Guneshli project with BP-AMOCO & TotalFina using IRAP RMS and OFM, Eclipse). From 2000 to 2001 in Karasu Operating Company as reservoir engineer. From 2001 I am working in Schlumberger as reservoir engineer.

Graduate Mechanical Engineer+ SAP AG MM certified consultant 11 years of experience in a leading Chemical Fertilizer industry as Piping erection / Project, Maintenance and Materials Engineer

Mechanical Engineer,17 years experience in: Piping Design,Sup. Construction, Pre-commissioning and start up for Deshydrat. crude oil/Gas Plant; Surface/on land Facility Engineer. Handle of norms Ansi/Asme/Api. Hydrostatic and Welding Test. Aws Member.

Master of Science degree in Petroleum Engineering from Texas A&M University and Bachelor of Science degree in Mechanical Engineering from Universidad de Oriente (Venezuela) with over seven years of experience in a major oil/gas company.

Professional manager with 10+ years experience and Russian native language is looking for challenging position in general administration, finance, sales or marketing.

•Strong Knowledge of CIS and Western manufactured oilfield related equipment and OCTG markets, policies and regulations, standards, international trade and marketing techniques. •CIS and Western O&G industry related connections •Fluency and literacy in English and Russian. •Computer literate

Geoscientist with 8 years of experience working in different phases of exploration, delineation and development projects in Venezuela onshore and offshore areas with a major oil company. Master degree in geophysics from Stanford University. Effective communication skills in English and Spanish.

Sr. Drilling engineer - 8 years working experience - MS in Petroleum engineer - - Industrial engineer degree -

Production Technologist with 11+ years experience, expert in Field Development Planning/Implementation), Well Designs, Drilling/Workover, Productivity Enhancements-simulation/Water Shut-off etc., Production Optimization, Well Surveillance, Sand Prediction/Control, Artificial Lift etc.

Experienced directional driller with 26 years drilling rig experience seeking new opportunities.

22 years experience of which 12 years with in the oil sector where I had to Implement systems, overseeing accounting and carrying internal auditing missions, Significant experience in start up process, J.V. management, Fluent in English, French and Arabic.

Seasoned Drilling Sup't - Onshore - with 15 years experience as a Drilling Sup't. 20 years of international experience. 18 years in the Middle East. A logical and systematic problem solver. A cooperative and friendly colleague. English is my mother tongue, but also moderately fluent in French.

Mechanical Engineer with 11 years experience. Skills on corrosion and production engineering. Corrosion engineering experience includes: chemical treatment, NDT and corrosion monitoring. Production engineering experience involves beam pumped, PCP and gas lift wells production optimization.

A dedicated professional with excellent technical, management and inspection skills. I maintain strong supervision, training and motivation abilities. Acknowledged as a dynamic performer with a high level of initiative and commitment to quality. A team player with superb communication skills.

Global HSE Manager

11 years covered in Oil and Gas Plants Instructed as an Instrument technician with theoretical knowledge and practicing on equipments for measurement and control systems from electrical to pneumatic or hydraulic circuits. Worked for big companies: AGIP & SONATRACH (from commissioning to start up)

Production Operator with 6 yrs exp in Petrochemical,Oil & Gas fields

I am an Indian currently employed as HSE Officer with Deutsche Babcock UAE for their DEWA project Jabel Ali. I have more than 3 years of full time work experience. I believe that the skills I have acquired in my professional experience and education will be valuable asset for your organization.

Electrical / Instrumentation Controls Designer with Intools, Autocad, & Microstation

2009 ASME B31.3 Piping Process by DAP Cosultan Jakarta

Instrumentation Engineer looking for a career in the Oil & Gas Industry

Operations Manager with 13+ years oil and gas experience. Experience in operations, Hr issues, Safety, contracts, budgets etc. Vast experience in Wireline, Slickline, braided line, electric line, coil tubing & completions/workovers. Exp in jackups, drilling boats, fixed platforms & land rigs.

Sr. E&I designer with over 20 years field engineering experience. US & Canadian citizen/

quality control tech.

MOTORMAN OR CRANE OPERATOR

Experienced in all aspects of the following: -

VISUAL INSPECTION : welding, monitoring,.. --- NDC: Cofrend level II PENETRANT TESTING ...

I am a hardworking Safety Officer/HSE Officer and serious about the my job in a way of performing it.

I am graduate of Cairo University with Bsc. From the faulty of science, geophysics department. I completed an intensive business English and computer course, which sharpened my skills and qualifications. And l had sales courses and communication skills courses from Dale Carnegie Training.

CSWIP 3.1 certified as Welding Inspector. My certificate number: 40083 valid until: 19 April 2014.

I have valid IWCF Well Control, Sea Survival Certificate, Fire Fighting, and H2S. I am self-motivated and willing to work hard, pro active, have a good interpersonal communication skill, good leader ship and I can work individually or in team

HSE Engineer-a good educated, skilled and experienced individual on construction, fire protection and safety operations aspects, attained from exposure in different industry, hard working individually and in team, friendly and outgoing, self-motivated and well- organized

Computer Proficiencies

I have 4 year of plant operator experience. I hold a valid 4th class power engineering certificate with part A of the third class conplete. I have SAGD and upgrading refinery experience which gave me amounts of skills required in this field of work.

Final year Bsc. Petroleum Engineering student at the University of Trinidad & Tobago. Worked as a Lab technician testing oil & water based muds@ Bariod Trinidad services

I have 10 years in the food industry

I have been in the Oil Field for 7 years. I have worked as a Derrick Hand, Centrifuge Tech and a Mud Engineer. I have a very good understanding of drilling fluids and drilling operations. I am easy to get along with and I have positively influenced all the companies I have worked for.

I am a hard working, friendly, and loyal individual. I strive to learn new things, and am always up to the challenge of the ever changing oil and gas industry. I have been a Coiled Tubing Supervisor with Halliburton for 7 years.

Welder GTAW-SMAW: SS, CS, And Duplex SS. ASME IX – MIGAS, Safety training (MSTS) combined sea survival, fire fighting & first aid.

I am qualified as a drilling fluids engineer. I have been employed with Baroid Trinidad Services Ltd a member of the Halliburton family.

B.Eng Mechanical Engineering SKILLS: Numerical skills Information Technology skills Logical and Analytical skills.

I am computer literate, possess good interpersonal and communication skills, available for team work and always have the zeal to achieve whatever goals set

Decisive, result-oriented professional offering 7 years of experience in Mechanical, Electrical & Civil Industry.

COMPUTER SKILLS

Working experience of 1-year 2-months in Electrical Industry . In which, having experiance of 6-months as Electrical Design Engineer in an EPC company handling the projects of substation designing belongs to the chemical,metal &fertilizer process industries.BE/Bsc Electrical engineer. 4-year degree

Drill Equipments/Systems. Crane Electrical Systems Plant Process Equipments. Effluent plant. Generators Control Systems. Transforming Systems. Jacking Systems. Winching Systems. Air Condition and Refrigeration Systems. Intercommunication Equipment. Power Generators. Health & Safety at Work Act. Comp

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 [ 113 ] 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out