Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #78137 next resume »»
CONTACT INFORMATION:
View contact information...

DATE OF BIRTH: February 8th, 1964

MARITAL STATUS: Married

NATIONALITY: Australian

HEALTH: Good

PASSPORT: Current

INTERESTS/HOBBIES: Swimming, Motor Bike Riding, Live-steam Engineering, Photography, Gardening.

LICENCES: Truck Licence
Motor Cycle
Motor Car
Fork Lift Ticket.
Loader Ticket.
Blue Card QLD.

AVAILABILITY: 1 Week

EDUCATION: Secondary Education

Sir Joseph Banks High School N.S.W
1980 - School Certificate 4th Form
Tertiary Education
Bankstown Technical School N.S.W
1981 - Fitter & Machinist Course

QUALIFICATIONS: Craft Certificate Automotive Trade (HV Mech) (Indust)
Cert. Of Achievement Gardner Denver Hydratraks Maintenance & Hydraulics.
Cert. Of Achievement Gardner Denver Hydraulic Drifters Drill Doctor.
Cert. Of Achievement Hydratrak Drills Operator.

OCCUPATIONAL & FUNCTIONAL SKILLS:
Operation of: Turret Lathe
Engineer Lathe
Milling Machine

Welding: GMAW
MMAW
Welding & Thermal Cutting
GTAW
FCAW

Boiler making: Marking out, Drilling, Cutting & Fabrication of components from drawings

Repair and Maintenance of: Gearboxes
Transmissions
Final Drives
Differentials
Diesel Engines: 1. Caterpillar
2. Cummins
3. G.M
4. Bedford
5. Perkins
6. Lister
7. Toyota
8. Isuzu
9. Komatsu

Basic Auto-Electrics: Alternators
Starter Motors
Air-Conditioning
Proportional Controls for Hydraulics
Rewiring of wire harness

Hydraulics, Maintenance of: Rams
Valve Banks & Controls
Accumulators
Pumps Gear, Vane, & Piston Variable Displacement

Hydrovane: Quote for repairs, strip, rebuild and troubleshooting.

Rotary Screw: Quote for repairs, strip and rebuild and troubleshooting.
Sullair - I.R. ¨ GD ¨ Compair ¨ Atlas Copco ¨ Holman.
Low Pressure & High Pressure.

Reciprocating Compressors: Quote for repairs, strip and rebuild and troubleshooting of dry and wet cylinder units, balanced and unbalanced.

Spray Painting Enamel Paints.

Basic Carpentry
Fault Diagnoses on all the above.
Technical Drawing
Rock Breakers Rammer, Indeco, Montabert & Atlas Copco.

Drilling Rigs: Repair and Maintenance
Ordering Parts
Troubleshooting problems in the field
Drilltech DK2, DK25, DK40, DK55, DK90 Rotary Rigs
Tamrock DHA600 DHA800
DHA1000 DHA1000 + 20
GD SCH2500, 3500 & SCH5000
MK35, MK45 & MK65, & PK100 Jumbos
SK Infinity Rotary Rigs CHP-25
Longyear LM55 & LM75 ¨C Helicopter Rigs.
Cubex Long Hole Drills.
CMM Long Hole Drills.
Atlas Copco Jumbo Drills.
Montabert Excavator Mounted Drill Units
Ingersoll Rand ECM 692 ECM 660 LM 600

Trucks: Caterpillar 776, 777, 785, 789, 793 off Highway Truck
D40 Articulated.
776 Off Highway Tractor (Belly Dumper)
Komatsu 630E HD465 HD785

Graders: Caterpillar 12G, 14H, 16G, 16H, 18G, 24H Road Grader
Komatsu GD 650

Loaders: Caterpillar IT 28, 966G, 980G, 988G, 994G.
Komatsu WA450, WA650, WA1200.

Excavators: Hitachi ¨ Komatsu ¨ Libberr ¨ Caterpillar
Various Small Brands

Backhoes: JCB ¨ Case ¨ Caterpillar

T.B.M: Wirth 6.5m dia Tunnel Boring Machine

Bulldozers: Caterpillar D5, D6, D8, D9, D10, D10H, D11H.
Komatsu D65, D275, D375, D475.

Pumps: Warman, Various Piston & Centrifugal Slurry Pumps
Submersible & Diaphragm ¨C Mine Dewatering.

Boggers: Tamrock, Elphinstone, Wagner.

U/G Trucks: Tamrock, Elphinstone, Wagner, Getman.

Training: Experience in writing Training Manuals for Operators & Mechanics & the supervision of there training & testing.

Skid Steer: Bobcat, Toyota, Case, JCB, Caterpillar.

Tractors: Various farm tractors & slashers, John Deer, Kubota.

Torque Systems: Experience in the Competent Use of Hytork & Norbar Torque Multiplying Systems.

Conveyor: Repairs & Maintenance to Stacker Conveyors, Conveyor Systems, Take Ups, Splicing, Rollers & Alignment.

Crushers: Jaw & Gyro Cone Crusher Repairs & Overhaul.

Gold Mines: Repairs & Maintenance to Associated Equipment Including SAG Mill Relines & Bearing Change Out. Repairs to CIL Tanks & Metquip Gearbox Overhauls.

EMPLOYMENT HISTORY

COMPANY: SALMON EARTHMOVING
JDA
4th AUGUST 2008
CURRENT
Position: Mechanical Fitter
Reports to: Supervisor

Duties included: Repairs and Maintenance and Overhaul of mobile mining equipment. D10 and D11 Dozers. 631E and 651E Scrapers. Various Water Trucks, Service Trucks, Fuel Trucks & Associated Equipment.

COMPANY: KOMATSU ROCKLEA
JDA
10 JUNE 2008
1st AUGUST 2008
Position: Mechanical Fitter
Reports to: Supervisor

Duties included: New Build of 830E and 930E Haulpack Trucks

COMPANY: AJ PARKES

28th MAY 2008
6th JUNE 2008
Position: Maintenance Fitter
Reports to: Supervisor

Duties included: Repairs and maintenance of coin presses up to 500 ton and plastic injection moulding machines.

COMPANY: ARAN TECHNOLOGY
MONODELPHEOUS
11th OCTOBER 2007
23rd MAY 2008
Position: Mechanical Fitter
Reports to: Supervisor

Duties included: Manufacture of continuous concrete batching plants.

COMPANY: FRANKIPILE

11th JUNE 2007
5th OCTOBER 2007
Position: Field Service
Reports to: Supervisor

Duties included: Repair and maintenance of piling equipment and Ancillary equipment Pile Drivers for Gateway Upgrade.

COMPANY: ACTION STAFF
ORIX TRUCKS
26th MARCH 2007
3rd JUNE 2007
Position: Truck Mechanic
Reports to: Supervisor

Duties included: Repairs & Maintenance to Hire Fleet of Road Trucks & Trailers

COMPANY: ACTION STAFF
BT EQUIPMENT
5th FEBRUARY 2007
23rd MARCH 2007 Position: Leading Hand
Reports to: Supervisor
Duties included: Repairs & Maintenance to Mobile Cranes
Day to day running of the Crane Section including the ordering of parts & allocation of work
10 Year Overhauls & inspections

COMPANY: MONADELPHOUS COATES HIRE
15th MAY 2006
22nd DECEMBER 2006 Position: Fitter
Reports to: Leading Hand
Duties included: Repairs & maintenance to Hire Access Equipment.
Including Lighting Towers, Mobile Compressors, Generators, Potable Welding Generators. Compaction Equipment.
Rebuild of Mobile Compressors
Commissioning of New Equipment.

COMPANY: BDS GROUP
SANDVIK MINING
13th NOVEMBER 2005
21st APRIL 2006
Position: Drill Fitter
Reports to: Supervisor

Duties included: Repairs & Maintenance to Tamrock Titon 600 & Pantera 1500 Drill Rigs Mt Isa.
Listing up of Modifications needed for Machines.

COMPANY: WORKFORCE SOLUTIONS
ERNEST HENRY
20th OCTOBER 2005
3rd NOVEMBER 2005
Position: Drill Fitter
Reports to: Supervisor

Duties included: Shutdown Repairs to D90K Driltech Drill Rig.

COMPANY: PT BOART LONGYEAR
HALMAHERA ISLAND - INDONESIA
31st JULY 2005
6th OCTOBER 2005
Position: Workshop Supervisor
Reports to: Country Manger

Duties included: Run Workshop on Day to Day Basis. Hands on Training of Nationals. Ordering of Parts. Fault Finding & Trouble Shooting on LM75, LF70 & LF90 Exploration Drills.

COMPANY: WORKFORCE SOLUTIONS
UDR ¨C UNIVERSAL DRILL RIGS
16th MAY 2005
15th JULY 2005
Position: Drill Fitter
Reports to: Supervisor

Duties included: Assembly of New Exploration Drill Rigs.

3rd JANUARY 2005 SABACTICAL.
15th JULY 2005

COMPANY: WORKFORCE SOLUTIONS
15th DECEMBER 2003
23rd JANUARY 2005
Position: Fitter/Boilermaker
Contracted to: Hastings Deering Brisbane

Duties included: Assembly of New off Highway Trucks & Tractors, Bulldozers, Loaders, Graders, Backhoes, Excavators, Water trucks, Compactors, Skid Steer Loaders. Repairs & Modifications to Articulated Trucks. Fit Up of Mine Related Safety Systems & Accessories.

COMPANY: RIVERSANDS
A T S GROUP
9th SEPTEMBER 2003
10th DECEMBER 2003
Position: Fitter/Boilermaker
Reports to: Supervisor

Duties include: Fabrication & Manufacture of New Sand Mining Plant to Customers Drawings. MIG, STICK & TIG Welding of Frame Work & Silos. Stainless Mig & Tig welding of Silos.

COMPANY: CLYDE BABCOCK HITACHI
TARONG POWER STATION SHUTDOWN

2nd AUGUST 2003
8th AUGUST 2003
Position: Fitter
Reports to: Supervisor

Duties include: Repairs & Maintenance to Air Heaters.

COMPANY: McDONALD CO-ORDINATED
BP BULNER SHUTDOWN

12th JULY 2003
31st JULY 2003
Position: Fitter
Reports to: Supervisor

Duties include: Repairs & Maintenance to Alky Plant ¨C Valves & Heat Exchangers.

COMPANY: WORKSOURCE
HAULMARK TRAILERS

30th APRIL 2003
27th JUNE 2003
Position: Fitter/Welder
Reports to: Supervisor

Duties include: Repairs to Semi-Trailers & Army Trailers.

COMPANY: BRODAN MINE MANAGEMENT
ROCHE MINING (ERNEST HENRY)

10th MARCH 2003
14th APRIL 2003
Position: Drill Fitter
Reports to: Supervisor

Duties include: Repairs & Maintenance to UDR Exploration Rigs & Booster Compressors (Ariel).

COMPANY: WORKPAC
GROOTE EYLANDT

18th DECEMBER 2002
13th FEBRUARY 2003
Position: Fitter
Reports to: Supervisor

Duties include: Repairs, Maintenance & Servicing of Mobile Plant. Repairs, Maintenance to Fixed Plant.

COMPANY: ADECCO
INCITEC SHUTDOWN
3rd MARCH 2002
4th FEBRUARY 2002
Position: Fitter
Reports to: Supervisor

Duties include: Repair & Overhaul of Various Valves & Heat Exchangers.

COMPANY: WBE ENGINEERING
WELDING & FABRICATION

26th JANUARY 2002
19th JANUARY 2002
Position: Boilermaker
Reports to: Supervisor

Duties include: Fabrication of Demountable Buildings.

COMPANY: PRESTIGE TROJAN RECRUITMENT
ADVENTIS GROUP

18th JANUARY 2002
7th JANUARY 2002
Position: Fitter/Welder
Reports to: Supervisor

Duties include: Repairs to Chemical Processing Plant.

COMPANY: PRESTIGE TROJAN RECRUITMENT
PALMER TUBE MILL SHUTDOWN

5th JANUARY 2002
22nd DECEMBER 2001
Position: Fitter
Reports to: Supervisor

Duties include: Shutdown Maintenance on Steel Mill Manufacturing Plant. Repairs to Stripping Mill. Overhaul of Large Gear Boxes.

COMPANY: WORKFORCE SOLUTIONS
HASTINGS DEERING

30th NOVEMBER 2001
12th NOVEMBER 2001
Position: Fitter
Reports to: Supervisor

Duties include: Repairs to Second-hand Machines.

COMPANY: TRANSFIELD CALTEX
LYTTON SHUTDOWN

30th OCTOBER 2001
8th OCTOBER 2001
Position: Mechanical Fitter
Contracted to: Transfield

Duties included: Shutdown Work. Fitting of Blinds to Pipe work. Fitting of New Valves & Gaskets. Stripping, Cleaning & Reassembly of Heat Exchangers & Hydrostatic Testing Of.

COMPANY: WORKSOURCE PERSONNEL

9TH APRIL 2001
28TH SEPTEMBER 2001
Position: Mechanical Fitter
Contracted to: Brisbane City Council

Duties included: Repairs & Maintenance of Various Mobile Plant Equipment including JCB & Case Backhoes, John Deer and Kubota Tractors & Slashers. Overhaul of Various Concrete Mixing Machines. Repairs & Maintenance of Concrete Kerbing Machines.

COMPANY: CHALLENGE RECRUITMENT
BRISBANE ¨C QUEENSLAND

19th FEBRUARY 2001
28th MARCH 2001
Position: Mechanical Fitter
Contracted to: East Coast Reman Komatsu
Reports to: Supervisor

Duties included: Dismantling and Overhaul of Komatsu Bulldozer Final
Drives.

COMPANY: WORKSOURCE PERSONNEL

23rd JUNE 2000
12th JANUARY 2001
Position: Mechanical Fitter
Contracted to: Brisbane City Council

Duties included: Repairs & Maintenance of Various Mobile Plant Equipment including JCB & Case Backhoes, John Deer and Kubota Tractors & Slashers. Overhaul of Various Concrete Mixing Machines. Repairs & Maintenance of Concrete Kerbing Machines. Repairs to various Road Paving Machines. Repairs to various Mobile Compressors.

COMPANY: BRODAN MINE MANAGEMENT

1st APRIL 2000
18th JUNE 2000
Position: Mechanical Fitter
Contracted to: Transfield Australia

Duties included: Repairs & Maintenance of Wirth 6.5 Metre Diameter Tunnel Boring Machine. Repair & Maintenance of Self-Priming Sump Pumps.

COMPANY: WORKPAC
29th DECEMBER 1999
27th MARCH 2000
Position: Mechanical Fitter
Contracted to: Various Job Assignments
Around Brisbane
Duties included: Repairs & Maintenance of Various Forklifts. Repairs & Maintenance of Daewoo Excavators & JCB Backhoes. Overhaul of Soosan Rock breakers. Repair & Maintenance of JCB Skid Steer Loaders. Repairs & Overhaul of Australian Army Equipment Unimog & Landrover that had returned from East Timor.

COMPANY: BRODAN MINE MANAGEMENT

6th SEPTEMBER 1999
11th DECEMEBER 1999
Position: Drill Fitter
Contracted to: Macmohans Contractors.

Duties included: Repair and Maintenance of D40K ¨C SK45 ¨C CHP-25 and Montabert Drill Rigs. 785 & 777 Dump Trucks. 18G Road Grader. 966 Loader. Mobile & Fixed Plant.

COMPANY: EXPRESS HYDRAULICS
BRISBANE QUEENSLAND
18th AUGUST 1998
23rd JULY 1999
Position: Dill Fitter

Duties included: Repairs Maintenance, and Overhaul of Various Blast Hole Drill Rigs and Quarry Crusher and Conveyor Systems. Fixed Mobile Plant. Indeco ¨C Rammer & Montabert Rock Breakers at Various Sites up and down the coast of Queensland. Heavy Fabrication & Manufacturing of Mining Components using Flux Core MIG for Auger Mining. Operator & Maintenance Training. Welding Instruction & Training.

COMPANY: PONTIL INDONESIA
BRISBANE QUEENSLAND
1st JULY 1998
10th AUGUST 1998
Position: Drill Fitter

Duties included: Repairs and Maintenance of UDR650 & Boart Longyear LM75 & LM55 Drill Rigs. Repairs & Maintenance of Mud Pumps & Ancillary Exploration Equipment.

COMPANY: DRILL CONCEPTS
BRISBANE QUEENSLAND
17th FEBUARY 1998
23rd JUNE 1998
Position: Drill Fitter

Duties included: Repairs and Maintenance and Overhaul of Various Drill Rigs. From Brisbane Wagga and Canberra. Repairs and Maintenance of D55K & D90K Drill Rigs Hunter Valley. Operator & Maintenance Training of the aforementioned above.

COMPANY: MINEQUIP PTY LIMITED
COBAR NEW SOUTH WALES

DECEMBER 1996
FEBRUARY 1998
Position: Fitter/Workshop Coordinator
Report to: Manager

Duties included: Repairs and Maintenance of Tamrock Loaders & Trucks. Repairs and Maintenance of various Ancillary equipment associated with Underground Mining. Repair and Maintenance of Pumps & Valves associated with Milling Operations. Repairs and Maintenance of Conveyor Systems. Installation of Howden Sirocco Ventilation Fans. Repairs and Maintenance of Cubex and CMM Long Hole Drills. Shutdown Work in the Gold Mines. Sag Mill Relines & Bearing Change Out

COMPANY: REEDRILL (AUST) PTY LIMITED

NOVEMBER 1994
NOVEMBER 1996
Position: Fitter/Serviceperson
Report to: Manager

Duties included: Repairs and Maintenance of SCH2500, 3500 & SCH5000 blast hole Rigs. Repairs & Maintenance of Gardner Denver Rotary Rigs. Repairs & Maintenance of MK35, MK45, and MK65 underground jumbos & PK100 Long Hole Jumbo. Operator and Mechanic Training Australia & Overseas Indonesia Freeport. Repairs and Maintenance of various air track rigs and mobile compressors. Repairs & Maintenance of Cubex underground drills Australia & Indonesia Freeport.

COMPANY: HUGHES DRILLING PTY LIMITED
BRISBANE, QUEENSLAND
OCTOBER 1991
NOVEMBER 1994
Position: Fitter/Driller
Report to: Manager

Duties included: Repairs and Maintenance of SCH3500 & SCH5000 Blasthole Rigs. Service and Maintenance of Light Vehicles. Full-time and Part-time Driller. Setting out & Loading of Blast Patterns.
.
COMPANY: DRILLING & MINING SUPPLIES PTY LIMITED
(BRISBANE AGENT FOR GARDNER DENVER)

JANUARY 1991
AUGUST 1991
Position: Fitter/Serviceperson
Report to: Manager

Duties included: Repairs and Maintenance of mobile and stationary air compressors. Repairs & Maintenance of Gardner Denver Drilling rigs, SCH2500, SCH3500, and SCH5000. Repairs to various air hand tools in workshop and in the field.

COMPANY: COMPAIR AUSTRALASIA PTY LIMITED
BRISBANE, QUEENSLAND

MAY 1989
DECEMBER 1990
Position: Fitter/Serviceperson
Reports to: Service Manager

Duties included: Repair and Maintenance of Air Compressors Hydrovane, Rotary Screw and Reciprocating Compressors. Repair and Maintenance of Drilling Rigs Tamrock and Drilltech.

COMPANY: COMPAIR AUSTRALASIA PTY LIMITED
SYDNEY NEW SOUTH WALES

JANUARY 1989
MARCH 1989
Position: Fitter
Reports to: Foreman

Duties included: Repair and Maintenance of Air Compressors Hydrovane and Vane. Repair and Maintenance of Rotary Screw, Sullair, Hollman and Compair. Repair and Maintenance of Compair V Major balanced reciprocating compressors.

COMPANY: ABBEY EQUIPMENT PTY LIMITED
SYDNEY ¨C NEW SOUTH WALES

FEBRUARY 1988
JANUARY 1989
Position: Plant Mechanic & Maintenance Man
Report to: Foreman

Duties included: General Repair and Maintenance of Elevating Work Platforms, Scissor Lift and Boom Lifts for S.E.C and Telstra.

COMPANY: MOBILE TOWERS PTY LIMITED
SYDNEY ¨C NEW SOUTH WALES

JANUARY 1986
JANUARY 1988
Position: Plant Maintenance Man
Reports to: Foreman

Duties included: Repair and Maintenance of Hydraulic Elevating work platforms, scissors lifts, boom lifts and gensets. Repair and Maintenance of Trucks, Brakes, Drivelines and engine rebuilds and repairs.

COMPANY: KEN GRAHAM ENGINEERING
SYDNEY ¨C NEW SOUTH WALES

JANUARY 1981
JANUARY 1986
Position: Apprentice Fitter/Machinist
Reports to: Owner/Tradesman

Duties included: Full-time Study (Theory). Practical Studies. Setting up and operation of: Engineering lathe. Turret lathe, Auto ¨C Cold Saw, Machine, Milling (Vertical & horizontal), Welding, Spray Painting

REFEREES:
Will be provided

View contact information...
«« previous resume next resume »»
Search Results (Resumes 7551 to 7600 of 10917)Go to Search Parameters...
Brief Description
I'm mechanical engineer, I also have a mention in petroleum engineer, I did my practices in companies such as Repsol YPF, Pacifpetrol S.A, and I did visited Weatherford to get information for my thisis of degree.
Having Diploma(3 years) in Instrumentation Engineering with 8 years Exp. in Oil/Gas field (Offshore / Onshore) projects, commissioning, maintenance.
IM Supervisor, DM Manager, Expediter, Technical Writing skills in authoring procedures, Business Development with Green conceptual ideas
I have over thirty years experience working in the oil, gas & petrochemical industries on the maintenance, construction & commissioning of various rotating & mechanical equipment. The positions I have held have been hands on and supervisory, in both the UK and overseas, working onshore and offshore.
I am interested in working for your organization. Presently I am employed at Sultanate of Oman. My responsibilities are Vessel berth assignments for the Container Ships, Bulk Cargo Ships, Passenger Ships, Oil and LPG Tankers calling in Port. My responsibilities also include Plan, Manage and Monitor
Mechanical Engineer - Rotating Equipment Engineer
A results-focused manager and leader who drives project teams to deliver outstanding results. Professional Engineer with 21 years of diverse experience in the hydrocarbon processing and minerals processing industries. Has exceptional experience on owner & EPCM teams.
Heavy Industrial Fitter with extensive experience on Fixed & Mobile Plant & Machinery. I have worked in Cross Cultures as a Mechanical Trainer/Supervisor.
i am a qualified Chemical and petroleum engineer with a masters degree, with upto 2 years experience in the exploration and production sector of the oil and gas field both in the field and design while using various softwares.
Geodetic Engineer exposed to various types of horizontal and vertical survey and can handle different geodetic engineering position.
Qualifications: Teesside University: 1st Year HNC Instruments, Cleveland College: BTEC National Cert Engineering, BTEC First Cert Engineering.
Strong engineering management and design background with a broad range of skills including: construction management, process plant design, subcontractors management, mechanical equipment specifications, project controls, material handling design including barge loading and unloading, AutoCAD
Geologist / Geotechnical engineer
Piping Field Planner/Engineer through 15 plus years journeyman experiece in the industrial construction industry.
Over six years of experience in geotechnical engineering including earthquake engineering and mining engineering. Has performed numerous analyses in ground deformation, lateral spread and foundation settlements caused by static and seismic loading using both traditional analytical methods and advanc
Hands on experience in USA chemical industries,environmental field, Groundwater Remediation , Industrial wastewater treatment , engaged in wide variety of environmental , chemical analysis .
Qualified and certified electrician, intensive troubleshooting skills
Production engineer, with strong knowledge in Rod Pumping, ESP, Gas Lift and softs related. Also production and inyection follow-up, project evaluation. Additionally experience in managment and operation.
20+ years of experience working in Materials Management, Inventory Control, Materials Planning Scheduling & Logistics, in both home office and field site locations on the construction of large petrochemical plants, natural gas plants, electrical power plants, and mining facilities.
Creating the Spool drawings for fabrication purpose using the Spoolgen Software.Input Files Taken from PDS, the Output is generated in Microstation,Checking the Generated Drawings & Documentation preparation.
Experience: Contract Management: Lining up contacts, Qualification: M.Tech.
Civil Engineer. Developing the 40 + retail outlet fro IOCL.IBP, Essar Oil in India.
B.E(mech) working in oil drilling rig of company "Nafta Pila" as HSE officer
Fresh Graduate and willing to work hard
I graduated from SAIT with a certificate in Process Piping Drafting awarded in September 2007. Through this program I gained knowledge in Natural Gas Processing, Piping Design, Plant equipment and Instrumentation. I have also had hands on training with AutoCAD, Microstation, ProCAD and 3dSmart.
Hard Working, Reliable, Ready to Learn and Friendly.
Broad knowledge base and experience in both the design and construction of oil and gas facilities. Forward thinking individual with the ability to take on many tasks at one time. Motivated leader focused on building strong professional relationships.
Project Engineering & Management
Near 13 years of professional work experience in the oil and gas industry, working experience on the on/off shore in Iran and extensive experience in oil and gas unit processing, reservoir engineering and well completion engineering.
Qualify E&I Site Supervisor, QA/QC Inspector, Project Coordinator, Project/Electrical Engineer and as well as Construction Manager. Excellent Documentation Skill for Project Management.
I am a Postgraduate Civil Engineer trained in "PROFESSIONALS IN PROJECT MANAGEMENT( PRIMAVERA 6.1 & MY PRIMAVERA)" FROM CADD CENTRE .I have both Bachelors and Masters Degree in Civil Engineering.My specialization in M.Tech was Construction Technology and management,.
More than 4 years of mechanical maintenance supervision experience, Business Analyst and Service Planner
I am doing job in wireline logging in H L S Asia Ltd in India on the post of an operator. I am doing independent cased hole and open hole jobs on onshore and offshore and driving LMV and HMV.
Experienced welder
A wide on-offshore range of experience in heavy equipment maintenance. Managing and supervising day-to-day preventive maintenance (P.M.) using a computerised maintenance management system. (C.M.M.S.) Modify equipment and machinery using management of change documentation (M.O.C.) to improve rel
Open Pit Slope Design, Tailings Dams, Plant Foundation Investigations, Earthworks
Design, Detailed Engineering, Engineering of DCS-Honeywell EPKS & Yokogawa Cenum CS. valve CV, Flow Element, PRV sizing. Foundation Fieldbus. FATof DCS. INTOOLS, InstruCALC, SPR. P&ID development. HSE member at FLUOR
5 years experience in piping stress analysis using CAESAR II in reputable companies
Problem solving analytical chemist with over five years gas chromatography and logistics experience in the research and development industry seeking a position as a chemist. Areas of interest include chromatography, sample preparation and logistics.
I am working as Process Engineer in Houston,TX with two years of experience in Oil & Gas Industry
Contract Safety and Construction Inspector for companies ,such as Conoco Phillips and Shell
I have had various roles within Document Control and administration sector including: Document Control, Expediting, HR & GA Officer, Project Co-coordinator, Project Secretary and Purchasing Officer.
Experienced in Construction of Offshore/Onshore Oil &Gas plants in the field of Fabrication, Installation, Hydrotesting & Pre-commissioning of In-plant/Well Head Piping and cross Country Pipe Line. Qualification: Bachelor of Engineering (Mechanical)
Petroleum Engineer having work experice for five years with a gians multinationals lioke Halliburton & Schlumberger in Reservoir & Production Engineering Areas
Experienced Senior Electricial Technician in oil refinery. Familiar with maintenance motors, transformers, generators and protection for the sames, frequency converters, power regulators, installing and programming PLCs etc.
I have skills, experience in maintenance work in the operations for resolving gas escapes and pipe repair work under strict deadlines. I am very interested in getting involved in operations. I am quick to learn, hardworking, could adapt to difficult situations and have strong team working skills
Chemical Engineering / Chemistry graduate from the University of Minnesota
Mechanical engineer-Masters-2 years experience as research assistant-proficient in development and usage of Finite element codes and packages-actively looking for a job.
The purpose of this resume is to define and highlights the skills and ability to work as a Planning Engineer. I secures 5 year of working exp. as Maint. Planning Engineer and Proj. Plan Engr. in Petroleum Refinery and for the const. of Pet.chem. & Steel Plant respectively.
B.S. CHEMICAL ENGINEERING UNIVERSIDAD METROPOLITANA, Caracas – Venezuela • Minor: “Oil/Gas & Petrochemicals, Production Engineering” • Graduation Date: February 2002 • GPA: 3.55 / 5.00 N°10 in 21 graduates.
First   Prev   151   [ 152 ]   153   154   155   156   157   158   159   160   161   162   163   164   165   166   167   168   169   170   171   172   173   174   175   176   177   178   179   180   181   182   183   184   185   186   187   188   189   190   191   192   193   194   195   196   197   198   199   200   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com