Resume - Drilling exploration production, per cv below

Misco Jobs

Resume #78200

CONTACT INFORMATION:
View contact information...

Point of Hire: Singapore

Place and Date: Montenegro former Yugoslavia 11-02-1962
Of Birth

Marital Status: Single

WORKING EXPERIENCE

Position: VIETNAM BASE MANAGER
Company: AKER SOLUTIONS
Country: Vung Tau, Vietnam
Position: Aker Solutions Base/Service Manager
Year:: August, 2006 to present time
Duties: Responsible for Base and Service in Vietnam

Position: LOGISTIC COORDINATOR
Company: SOMEPORT-WALON, AMEC SPIE, UK
Country: Yemen
Year:: May, 2006 to August 2006
Duties Mainly responsible for transporting pipe from Aden to Balhaf south of Yemen route required for building pipeline on YLNG project, besides, involved in transporting heavy equipment compulsory for building Yemen LNG plant.

Position: SERVICE REPRESENTATIVE
Company: AKER KVAERNER
Country: Vung Tau, Vietnam

Year:: February, 2004 to May 2006

Duties: Working as Service engineer in Vietnam, mainly covering work for Cuulong JOC, PCVL TSJOC, KNOC, JVPC, BP,DAU HOUNG Also, I was with Aker Kvaerner working for Dauphin Energy in Qatar and Statoil-Iran.

Position: Sr. SERVICE REPRESENTATIVE
Company: COOPER CAMERON CORPORATION
Country: UNITED ARAB EMIRATES
Year: Sep 2000 – Sep. 2003

: Three years worked with ADCO,ZADCO,ADMA,BUNDOQ mainly on Cameron, WKM, McEvoy, Ingram Cactus,Demco,
Willis, Thornhill Craver, Surface/ Subsea, Equipment. In addition worked in Bahrain, Oman Iran and Pakistan, mainly working service for all customers in these countries. Short term held position deputy service manager increasing service revenue.
However, I was directly involve in Cameron sales group and occasionally with tendering team.

Position: SALES/ SERVICE REPRESENTATIVE
Company: COOPER CAMERON CORPORATION
Country: QATAR
Year: Sep 1996-Sep.2000
Duties Installing and maintaining all types of Cameron conventional compact wellheads, mudline suspension system and sub sea completions. Directly working in partnership for Qatar Gas, (Mobil-Total), Ras Gas (Exxon-Mobil), OXY, Qatar Petroleum, and Pennzoil). Major achievement at that time was installation of premium SSMC compact wellhead system on largest single gas field in the world; hence fully involved in supporting Cameron Doha sales team.

Position: SERVICE REPRESENTATIVE
Company: COOPER CAMERON CORPORATION
Country: UNITED ARAB EMIRATES
Year: Sep 1995-Sep.1996
Duties: Working with Cameron as Service Engineer. Implementing installation and maintenance for all type of Cameron wellhead and BOP's for mayor oil companies and drilling contractors in UAE, besides that worked on assemble floor in Sigma Enterprises

Position: DRILLING ENGINEER
Company: SPERRY SUN- DRILLING SERVICES
Country: DUBAI, UAE
Year: April 1993-Sep 1995
Duties Drilling Engineer working on Directional Drilling Tools ie MWD, LWD and FE tools. While working for Sperry Sun I received intensive training for Directional Driller, In addition to that I was working on planning directional drilling wells. Mainly my initial responsibilities were to build DD tools, as such: mud motors, jars, adjustable stabilisers, shock tools and multi-lateral tool, at the same time I was working on maintaining and servicing MWD and FE tools. Later on, I assisted and followed directional driller for first directional well with
4-3/4'' short radius mud motor in UAE (Amoco Sharjah), as well as I was involved in operation for building the first coil tubing directional well with 1'' mud motors in UAE. (Amoco Sharjah). However at the same time I was fully engaged with assisting Directional Drillers who were working and looking after Dubai Petroleum Company (DPC) and ADCO Abu Dhabi.

Position: Coiled Tubing Operator. Well Testing Operator.
Company: UAE- OIL FIELD SERVICES
Country: U.A.E.
Year: April 1991-April 1993
Duties:: Mainly working as Coiled Tubing Operator. Well Testing Operator in
U.A.E. Also maintained and worked on all kinds of completion tools manufactured by: Macco (Sub Surface Safety Valves, Gas Lift
Valves), Arrow-Oil Tools (Completion Packer-s), and
Az-Grand Products ( Pack Stack, Wipe Stack and Drilling Tools).
.

Position: DRILING ENGINEER
Company: YUGO PETROL MONTENEGRO
Year:: Nov 1987-Jan 1991
Country: Former Yugoslavia. Currently Montenegro
Duties: Assisted supervision work on Jack up drilling rig (Panon), then assisted supervision on land rig drilling well JJ-1, after that assist supervision for well JJU-1 in South Adriatic Sea. At this period of time I received intensive drilling training from major national oil companies INA and Nafta Gas.

Educational Background

Month/Year

Nov-1987 BS Degree, Petroleum Engineering

Month / Year Certificate

Professional Petroleum Engineer certificate
February 1988: Completed professional exam in Turbo
Drilling Zagreb, Croatia 1988, and became Professional Petroleum Engineer.

May 1988: International Well Control School: -
Drilling Supervisors level Well Control
School. Zagreb, Croatia.

March 1988 thru July 2008: Drilling Courses and Training:-
INA-NAFTAPLIN, Zagreb Croatia

July 1989: Drilling Courses and Training:-:-
NAFTA GAS, Novi Sad, Serbia

April 1991 thru Jun 1991: Well Completion Courses:-
ADMA –OPCO and ADCO
Abu Dhabi UAE

Nov-1993: Directional Drilling Courses:-
Sperry Sun Dubai UAE

May-1996: International Well Control School:-
Attend Well Control school supervisors level
Cameron Houston.

May-1996: Cameron training courses and school:-
Houston Texas
Surface Wellhead Engineering.
Divisional Quality.
Engineering Standards.
Gate Valve and Choke Engineering.
Drilling Engineering.
Controls Engineering.
Project Management.
Purchasing Department.
Manufacturing and After-Market Department.
Safety and Environmental Department.

Sep-1996 Cameron training courses and school:-
Liberty Texas
Shipping/Receiving Department.
Assembly Floor.
Welding.
Inventory Control.
Drilling Engineering BOP'S (Pit Crew)
Purchasing.
QA/QC. Scheduling.
W.H. Engineering.

Nov-1996 Cameron training courses and school:-
Paterson Louisiana
Cameron Mud Line System, WMSW. WMSWI-Sub-Sea. Completion Courses. Single Trip Metal –STM10 and Single Trip Metal – STM15.

Jan2007 thru Dec 2008 Crestcom's Bullet Proof Management courses
Ho Chi Minh City Vietnam.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 10902)

Go to Search Parameters...

Brief Description

HYSYS/PROII/NGL/LPG/LNG/SYN GAS - CONCEPTUAL, FEED AND DETAIL - REFINERY, NATURAL GAS, CRYOGENIC PROCESS, SOUR GAS REMOVAL, ADVANCED PROCESS CONTROL (APC), GASFICATION (BtL, CtL and GtL). DISTILLATION AND REACTOR. HYSYS/PROII/ Distillation/Separation Sequence/Pinch Analysis.

HVAC FOREMAN

Drilling supervisor onshore with a good experience in multilateral wells.

22 years experience in maintenance , compressor , generator , pump , drilling equipment , machine shop service , manufacture , inspection service , production , wire line , fishing tools , welding work , commissioning.

Process/Commissioning/Start-up/Operation/Exploitation/Engineer

Condition Monitoring, Reliability Engineer

HSE-Engineering Graduate, P.G. Diploma in Industrial Safety, NEBOSH ,Ecology & Environment, Lead Auditor OHSAS 18001, specialized in Process and project Safety Management, Safety Auditor, Emergencies Planner, Advance Experience in the Management of Major Accident Hazards Controller and Trainer

Free! Geologist with 20 years experience in minerals exploration & oil and gas industries.

Pipeline, Piping & Mechanical Equipement design and construction support

Worked in exploration, production and academia

Pressure vessel design engineer, Proficient with: SolidWorks, Inventor, Pro/E, AutoCAD, Algor, ANSYS, COSMOS, Matlab, Compress Codeware, Intuitive ERP; Proficient with ASME Code VIII, Div. 1 & ASME Code VIII Div. 2, B31.3; kill at using the knowledge in WRC107 & WRC279

Highly skills reservoir engineer with 18 years E&P experience and a Masters in Petroleum engineering Degree. Experience includes reservoir simulation, water flood design and management, EOR techniques, Heavy oil development, reserves evaluation, well test design and analysis & reservoir management

19 years experience in the Oil Industry with both service company & operators in UK, Oman, Australia, Brunei, Saudi, and Malaysia. Experience in Field Development Geology and geocellular modeling.

Position: Senior Instrument Engineer / Qualification: Master of Science (Electronics) - Queen’s University of Belfast

Professional Engineer with 19+ years of experience in engineering and project management, including design, sizing, and specification writing of various static and rotating equipments.

A seasoned completion/well intervention/well test professional with 18 years of experience with expertise in sand control, intelli.

Sr. Geologist with strong project management experience

the position of Chemist and subsequently to put my contribution for the growth and development of the company by utilizing my best efficiency and skills and to achieve my further career advancement opportunity.

first class marine negineer

Experienced Principal/Senior Control Systems Engineer who can contribute significantly to your company.

I submit my application for the same.For the Eighteen years , I am working with Reliance Industries Limited Hazira Complex. During this period I was involved in setting up different laboratories , e.g.Water Laboratory,MEG Laboratory,PVC/VCM Plant Laboratory,Polyethylene Plant Lab,Polypropylene

MS in Petroleum Engineering, 20+ Years experience as Reservoir Engineer. Skilled in Reservoir simulation, Field Development Plans and Well & Reservoir Management.

A proactive and enthusiastic individual with 17 years of extensive expertise in the field of offshore positioning/navigation/geophyscial/pipeline/hydrographic survey.

Sailed for lasat 18 years on board Chemical, petroleum, OBO and Bulk carriers. Extensive experience on drydocking and repair yard. Completed conversion of a ship to FSO at Keppel Shipyard.

Sequence Stratigraphy, tectonic, pre/post-stack seismic attributes, petrophysic, static reservoir modeling, fracture modeling

I have 18 years experience in Oil & Gas Industry.Experience in completion execution: Completion activity and workover operation, Well Testing (Oil / Gas), Gravel Pack, Gas Lift, Submersible Pumps, Perforating Technique, Well Stimulation (Acid / Frac), Cement Squeeze Operation.

Well-developed interpersonal skills.

Senior Process and flow assurance engineer with full project cycle experience.

HSE / Terminal Operations / Construction / Turnaround

I am a licensed Canadian engineer with M.Sc. degree and 28 years experience in Instrumentation & Control Systems (DCS&PLC) design, instruments specification (InTools), purchasing, commissioning, start-ups, maintenance, and training. In past twelve years I worked with major EPC offices in Calgary

I am an MBA with an engineering degree and over 18 years of experience in oil and gas industry across various disciplines like HSEQ management, offshore opeartions and construction projects. Currently, I am employed as the Head of HSEQ at a large organization.

Administration & Finance Specialist in Most Fields of Oil & Gas Industry

With over 28-years of procurement and logistics related experience in the Oil & Gas (Domestic, International Field and Office). Well respected by service and supply companies worldwide, I am currently seeking a challenging position in an international company. Whereby, I can utilize, enhance, and co

Piping Stress Oil/Gas, Off/Onshore, FPSO's and Nuclear - Caesar,Autopipe and PSA5

A committed and professional with over 27 years of progressive and varied experience in the field of Mechanical Engineering in the areas of Operations, Maintenance & Inspection of Petrochemical, Oil and Gas Equipments, Marine equipment. Expediting of equipment for oil and gas industry

I am a positioning specialist/navigator with over 19yrs post qualification experience. I have worked in various countries including USA, Saudi Arabia, Nigeria, Chad, Egypt, and UAE. I am experience in both marine, land, desert operations seismic surveys. I have also worked as a consultant client rep

Highly competent contracts administrator with extensive experience administering multi-million-dollar-dollar contacts for major projects in the power sector. Expertise includes managing pre-award contract management as well as post bid contract management incl. expediting.

I am Petroleum Geologist with +20 years experience in subsurface projects. These experiences cover mostly production geology, drilling operations and a few exploration projects. I was also involved in heavy oil projects, including drilling operations, well geostering and geocelular 3D geologic model

- Coordinating services e.g. directional drilling, fishing, drilling tools, liner hangers, packers, cementing, stimulation, wire line, geology, gyro survey, electro logging, etc. - Implementation of logging operations and witnessing the same. - Monitoring well profiles as per requirements (both Ge

Experience 14 years in Refineries (Fuels & Lube) as a Process Engineer to Technical Services Manager in India. 9 years in KNPC as a Process Design Engineer, in Project Department, implemented minor and major projects in 3 Refineries. 3 years in EPC Company, Canada, Designed SAGD utilities and SRU.

B.Sc. in Petroleum Engineering, 28 years work experience whereof 16 years in drilling supervision and operations, 4 years drilling engineering and planning.

Rigging & Lifting Specialist

Worked on onshore Oil collection & processing plants, Gas Plants, Offshore Platforms & FPSO during pre-commissioning and commissioning levels.

Over 30 years experience in Oil and Gas Petrochemical Industries onshore and offshore in the UK and overseas. Experience gained on various onshore projects, i.e. Power Plants, Chemical Plants, Pumping Stations, Alumina Plant, and Petrochemical Refineries ;BSc Mech. Eng..

Free! I am an International Sr. Well Engineer with a wealth of worldwide experience and knowledge. I have a Petroleum Engineering degree and 27 years in the industry. I want to continue to contribute to the technological challenges of the energy arena, particularly offshore, subsea and deepwater.

Over 25 years of international oil/gas industry experience as a professional Geologist, I worked on Africa, Middle East, Canada, North Sea, India, Kazakhstan, Trinidad & others. Proven track record in geological exploration & development venues: prospect generation, new ventures andplay fairway

Marketing Leader

Qualification : B.Sc. Accounting and MBA Accounting and Finance. Experience : 18+ years experience in contracts and procurement (C&P) for oil and gas industry. Manages and executes all steps of the contracting processes, i.e tenderings to contract closures.

Drilling exploration production, per cv below

B.E. (Mechanical) - 1980

First 1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out