Resume - I offer extensive experience in construction and heavy industry in a wide range ...

Misco Jobs

Resume #78207

CONTACT INFORMATION:
View contact information...

HSE Manager, Fluor Arabia Limited, Saudi Kayan U&O Project 2008 – Current
The manning levels for the Fluor Utilities and Offplots (U&O) section on the 1.8 Billion USD Saudi Kayan Petrochemical Complex is peaking with 9200 personnel, of which my area of responsibility covers the Port Facility, Royal Commission Corridor and the Saudi Aramco Juaymah Gas Plant works.
Major accountabilities relate to all HSE aspects of project execution from civil works, below and above ground services, steel erection, the installation of capital components, E&I systems, pre commissioning activities and environmental performance and compliance
To satisfy these accountabilities in my current role, I must ensure the HS&E expectations and directives of both the Client and Fluor are met and manage supervisors, inspectors, nurses, medics, and other employees working in the HSE department. I must also;
* Monitor the HSE programs and site conditions at all work sites during daily, weekly, monthly and quarterly inspections and audits and work on continuously improving the current system.
* Oversee incident investigations and help form part of the team that will conduct investigations of incidents that could result in litigation before writing the final report including recommendations for corporate review and release to appropriate stakeholders.

* Develop and present recommendations and advise to all levels of management to help ensure there is a balance between productivity and the safety of all stakeholders.
* Create and establish project HSE programs, databases and filing systems to address program gaps and to continuously improve existing systems.
* Maintain liaison with client representatives, company and client HSE personnel, professional associations and regulatory agencies.
* Assist other business lines, projects, and company organizations with improvement to their HSE programs and systems.
* Maintain liaison with the owners' representatives, the community, and the corporate HSE group.
* Providing a regulatory interface for the project.
* Producing and supporting HSE education and training programs for all stakeholders including contractors and subcontractors while continuing with my own education as part of the continuous improvement cycle.
* Represent the company in outside HSE organizations such as the Safety Institute of Australia (SIA), American Society of Safety Engineers (ASSE) and client (ARAMCO) steering committees.
* Ensure timely reporting of HS&E incidents.
* Verify that contractors develop and implement suitable Safe Work Plans; this may include assistance in the form of training and development of specific Safety Task Assignments, Risk Assessments and Job Hazard Analysis for all high risk tasks on site.
* Monitor the condition of the contractor's camp and accommodation facilities to ensure compliance to legal obligations, and that no social/health and environmental issues develop.
* Maintain consistent interpretations of the project HS&E system for all stakeholders.
* Maintain an effective HS&E focused relationship with each contracts Project Manager.
* Direct the contractors HS&E managers and their supporting field safety personnel.
* Manage and supervise the application of the projects HS&E Management Systems by the assigned contractors.
* Monitor the contractors HS&E performance and drive continuous improvement.
* Apply the practices of Behavioural Based Safety Management to interactions with the workforce.
* Ensure contractors develop and maintain emergency response plans acceptable to both the company and the Client and that those documents stay current.
* Advise, consult, guide, and assist sectors, divisions, regions, or corporate departments in HSE matters.
* Initiate and maintain HSE awareness programs and foster such programs to improve awareness.
* Provide guidance to management through interpretation of HSE Practices and Procedures, legislation, and regulations.
* Participate in monitoring and controlling HSE standards and applicable legislation and regulations.
* Inspect, monitor, and evaluate HSE programs for value and effectiveness.
* Retain flexibility with due consideration given to the disciplines of the workforce, the cultural norms of a significantly diverse team and sensitivities related to our Client and the location of the project
HSE Manager/Supervisor, Fluor Arabia Limited, Yansab U&O Project 2006 – 2008
The manning levels for the project peaked with 7900 personnel on the 1.4 Billion USD YANSAB Petrochemical Utilities and Offplots (U&O) works for which Fluor is the principal contractor
Major accountabilities relate to all aspects of project execution from civil works, below and above ground services, steel erection, the installation of capital components, E&I systems, pre commissioning activities and environmental performance and compliance
To satisfy these accountabilities I must for assigned contracts:
* Ensure the HS&E expectations and directives of both the Client and Fluor are met
* Maintain an effective HS&E focused relationship with each contracts Project Manager
* Promote and facilitate compliance with the Fluor Project HS&E procedures by both Fluor Area Construction Managers and their specialist staff
* Direct the contractors HS&E managers and their supporting field safety personnel
* Manage and supervise the application of the projects HS&E Management Systems by assigned contractors
* Monitor the contractors HS&E performance and drive continuous improvement
* Apply the practices of Behavioural Based Management to interactions with the workforce
* Coordinate the HS&E aspects of Non Destructive Testing (NDT) including radiography, hydro and gas pressure testing
* Supervise, from an HS&E perspective, the chemical, oil, air and steam cleaning, flushing and preservation of systems and subsystems
* Ensure contractors develop and maintain emergency response plans acceptable to both Fluor and the Client.
* Conduct investigations and ensure timely reporting of HS&E incidents
* Verify that contractors develop and implement suitable Safe Work Plans
* Seek and maintain consistent interpretations of the Fluor project HS&E procedures
OHS&T Supervisor, Ok Tedi Mining Limited 2001 – 2006
Training and safety concerns for all load shifting and scaffolding on site including Auditing, JSAs, STAs, Lift Plans and RAs conducted on the Ok Tedi Goldmine with an annual profit of 2 Billion Papua New Guinea Kina (PNGK).

Loadmaster and HSE Rep, Hevilift Helicopters Pty Ltd 2000 – 2001
Managed the loading of aircraft and the safety of a multidisciplinary team of workers to mobilize and erect exploration drill rigs and distribute mining supplies/chemicals to various companies in Papua New Guinea (PNG) and Indonesia for clients such as Chevron-Texaco, BP, Parker Drilling, Schlumberger and Pertamina.

Rigging Supervisor and HSE Rep, Creative Design 1999 – 2000
Trained and led a team of local workers constructing and erecting various antennas and towers for the Airport Locator Beacon System throughout isolated locations in PNG.

Loadmaster and HSE Rep, Columbia Helicopters 1997 – 1999
Managed the loading of aircraft and the safety of a multidisciplinary team of workers to mobilize and erect exploration drill rigs to various companies in PNG and Indonesia for clients such as Chevron-Texaco, BP, Parker Drilling, Schlumberger and Pertamina.

OHS&T Supervisor, ABB Construction and Engineering 1996 – 1997
Ensured the safety of ABB personnel at Chevron's Kutubu project in PNG including maintenance of the Central Production Facility, construction of the Gobe Production Facility and installation of the "Xmas trees" on all new well heads.

Leading Hand Rigger/Scaffolder/Crane Operator, REB Engineering 1989 – 1996
Responsible for training and safety in various mine shutdowns with new personnel while focused on leading the crew to complete the tasks assigned by the deadlines given.

Rigger, Scaffolder, RD Erections and Superior Scaffolds 1986 – 1989
Worked as part of a scaffolding and rigging team at various refineries, power stations and chemical plants, including Ampol, BP and Incitec Fertilizers.

2008 – 1st Year of Masters Program, Workplace Health and Safety, Curtin University
2003 - Diploma, Training and Assessment Systems, Training Unlimited Australia
2003 - Certificate IV, Workplace Trainer and Assessor, First Choice
2000 - Certificate IV, Open Crane Operator, More Skills Training Services
2000 - Certificate IV, Forklift Operator, Major Operator Training Services
1999 - Certificate III, Digital Arts, TAFE, Red Hill
1987 - Certificate IV, Advanced Rigger, TAFE, Ithaca
1987 - Certificate IV, Advanced Scaffolder, TAFE, Dutton Park

Affiliations
Member of the Safety Institute of Australia (SIA)
Member of the American Society of Safety Engineers (ASSE)

Knowledge, Skills and Proficiencies
* Currently studying 2nd year of Masters Degree Program in OHS majoring in Environmental Safety Management
* 8+ years HSE experience with Oil & Gas and Downstream Chemicals
* 12+ years international work in three countries with multidisciplinary/multinationality teams
* Teamwork – Part of a team that helped achieve 20 million hours man-hours LTI Free on two separate projects.
* Customer Focused – Ensured contractor companies compliance with Clients requirements and environmental and safety regulations
* High Performance – Helped reduce AFR/IFR to record lows
* Problem Solving – Identified safety issues and risk trends and presented solutions that averted significant exposure for my employer
* Training – Mentoring employees in their roles and responsibilities for 20+ years; Additionally I hold a Diploma in Training and Assessment Systems.
* Very competent with report writing and programs such as the Microsoft Office Suite.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5101 to 5150 of 10903)

Go to Search Parameters...

Brief Description

I/E Designer, 28 years experience in the petrochemical industry along the Gulf Coast and in the oil industry in Alaska. Worked onsite at client facilities and in-house. Extensive use of Autocad and MS Office. Experienced in working with other disciplines, clients, vendors & construction. Will travel

Power sector professional with over 20 years of experience in O&M of thermal power plants

B.E.Electronics and Instrumentation

Skilled geologist looking for an opertunity.

Self-confident, hardworking and familiriaty in team-work

A very skilled Geomodeler competent in the use of Schlumberger PETREL 2008 for Static Reservoir modeling and Hydrocarbon Volume Calculation with a solid background in Reservoir Engineering and the applications of PERFORM in Well Design and modeling, also with Quality HSE Training from Shell(SPDC)

Subsea Pipeline Design Engineer

Pipe Stress Engineer

2 years Experienced Offshore Field Engineer working in platform construction

B.E.Mechanical Engineering....skill known Auto cad Pro-E,Ansys,Plant Design System ,piping design,hass

DIPLOMA IN MECHANICAL ENGINEERING, AUTOCAD 2008, CADWOX PROFESSIONAL 2008,PVLITE 2005

ArcGIS, Oasis Montaj, Uxolab, AutoCAD, MathCAD

I have 3-D drafting skills in Auto Cad Inventor AutoCad 3-D wire Frame I also Have experince in creating electrical schematics for offshore equipment.

15 years of experience in plants operation as panel operator, plant operator, team leader, shipment coordinator and superintendent in venezuela in companies such as PDVSA and ExxonMobil in units such as naphtha hydroteater, hydrogen, amine, sour water, sulfur recovery and tanks movements

PROJECT/DESIGN ENGINEER FOR FIRE PROTECTION SYSTEM

Proven oil and gas manager

Production operator,wireline operator and mechanic.

Experienced Exploration Geologist with over fours years’ field experience.

Electrical techinician work on FPSO/Rig and power plant

Mechanical Engineer, with 11yrs exp, Specialized as Coating/painting engineer implementation of different types of coating techniques, practices, Corrosion control Operations, scheduling and monitoring. Been a Coating Inspector & QC Inspector & NACE Corrosion Inspector - Level 1

Construction of Transformer building Construction of Utility Building Construction of electroplating building. Construction of RCC Over Head water Tank Construction of Offices Buildings

B-tech Hons Mechanical

My Name is Asif Naeem &My Edgucation in Diploma of Mechanical Engeering&My exprience in Mechanical Techniction&Fabrication

landman

I offer extensive experience in construction and heavy industry in a wide range of roles and positions with a detailed theoretical and practical working knowledge of the following that I have developed over the previous 22 years of my career as both an OHS&E Professional and a team leader.

I am Electronics & Communication grad from India with more than 3 years of experience in Electrical & Instrumentation.I have through knowledge of SAP PM module.

Experienced Landman seeking a challenging work environment

BACKGROUND SUMMARY Over 10 years of experience in Piping, Structural, Mechanical, and Civil with experience in 3D modeling, CADWORX and drafting and designing refinery foundations.

Three years experience as an engineering tech, 10 years experience with data manipulation.

Inspection and laying of PE gas line in Mumbai for Mahanagar Gas Ltd (MGL) and Inspection of painting and coating of steel structures in offshore.

I am a geology masters student at Baylor University (May 2009 graduation). My training has included all of the basic geological branches with focus on sequence stratigraphy, depositional systems (both carbonate and clastic), and isotope geochemistry.

Snubbing / Workover Supervisor, Field Technician.

Senior Design Engineer - Electrical

I am 38 years old, good health and have 12 years solid experience on project management for several types of large, complex and fast track International projects.

Working Offshore as an engineer and mechanic for 15 years

PDS Piping designer Engineer

PLANNING ENGINEER: Liaison with Client, Consultant, Sub-contractors and Internal departments to get complete information on assignments for further instructions to Project Engineers. Conduct daily planning/production meetings with Site Manager/Project Engineers for discussing critical activities

Process Engineer in Refinery, Oil&Gas and Petrochemical Industries

Construction Mgr.- Piping Eng.

Senior Electrical Control Eng. / PLC Programmer / Scada System Specialist

Relay Protection coordination (by Captor software); motor starting, load flow, fault studies by ETAP software; DBs and MCCs selection; AFD selection and implementation; Frame6 power generation commisioning and maintenance; Switchgears up 110 kV commisioning and maintenance.

v A First class (60%) Bachelor of Chemical (B.E.) engineering graduate from Poona university in 1992, having a total (Cryogenic Air Separation/LNG Terminal & Regasification Unit /Refinery/Petrochemicals) industrial work experience of ~ 12 years.

aws cawi

PDS administration, Complete project setup and support on multiple large scale projects using PDS 7.2, 7.1,7.0 and 6.4 Microstation J/SE, PDS Piping specifications and RDB Support, Isogen setup and support, INTools support, SmartPlant Review Administration, and other 2D and 3D CAD tools.

Engineering / Construction Mgmt – Over 25 years combined experience supporting large domestic & international project assignments in both Home Office & Field locations. Business lines include Mining & Metals, Nuclear Power, Nuclear Waste Handling, & Refinery / Chemical (Oil / Gas, & Hydrogen) Plants

Industrial Journeyman Electrician-28 years

I have 18 years experience in the Oil Service Industry, involved in all aspects of Coiled Tubing, Nitrogen Services, Fluid Pumping, N2/He Leaktesting(HLD), Pipeline Pigging/Testing & Well Testing. My last permanent position was Service Supervisor II for Halliburton Coiled Tubing in Australia. Since

Experienced Senior Civil/Structural Designer with mostly Petro-Chem background

Present Bachelor of Petroleum and Natural Gas Engineering (Designing counstruction and exploitation of oil and gas pipelines,piping and storage facilities faculty )

Rotating Equipment Engineer

First Prev 101 102 [ 103 ] 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out