Resume - Welding Inspector/ Qa Qc Inspector

Misco Jobs

Resume #78249

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS

* BGAS/CSWIP Welding Inspector (BGAS No. 577215)
* APPOINTED FIRST AIDERƒn

SAFETY TRAINING

* BOSIET Offshore Survival/Fire fighting.
* UKOOA Full Medical Certificate

PROFILE

Excellent experience gained in a variety of demanding environments. Experience includes but not limited to - Onshore/offshore pipelines. Block and check valve installation.. Lay and spool barges and installations. Comprehensive working knowledge of International codes and standards. Highly motivated, flexible and adaptable to any work environment.

WORK EXPERIENCE

LLOYDS REGISTER, ALGERIA, SAIPEM S7000 & CASTORO SEI, OCTOBER 08

Client Rep for Lloyds Register on board the Saipem S7000 during deepwater J lay of various diameter sub sea pipelines. Then onboard the Castoro Sei (C6) during S lay of sub sea pipelines. Duties included but not limited to ensuring that all procedures and specifications where adhered to at all times by the contractor during the welding, double joint, blasting, coating and NDT operations, completing all QA/QC documentation and filing.
Also ensuring that all safety procedures were strictly adhered to.

Agip KCO, KAZAHKSTAN, CASTORO 12, APRIL 07 TO DECEMBER 07

Client Q.C, Laying a 28" Sour gas pipeline in the Caspian Sea.
Duties included, ensuring all procedures and specifications where adhered to at all times, and completing all QA/QC documentation and filing.

BP GREATER PLUTONIO PROJECT, BLOCK 18, ANGOLA, JAN 07 to MARCH 07.
Client QC for Acergy overseeing the sub- contractor, Sotrraplex. Ensuring all work was carried out to procedure and specification, including but not limited to welding, coating, blasting, painting and dimensional control of the ILT's. Ensuring all paper work was in place for the final as built documentation.

AGIP KCO, CASTORO 12, KHAZAKSTAN. JULY 06 to OCTOBER 06
Client Q.C Inspector, Laying an 18" Carbon steel pipeline in the Caspian Sea.
Duties included but not limited to welder qualification, and inspection of welds both front and back end. Monitoring and enforcing all HSE plans and policies to ensure construction activities are conducted in a safe and acceptable manner. Ensure all construction work is in accordance with the approved drawings, specifications, Standards and procedures.
Manage any and all inspections on contractor vessels by third parties and authorities.

LLOYDS REGISTER, FPSO SHIEHALLION, NORTH SEA. APRIL 06 to JUNE 06
Client Rep for Lloyds Register on board the BP FPSO Shiehallion doing a CUI (Corrosion under Insulation survey). Responsible for overseeing the contractor stripping and inspecting all carbon steel pipe work to evaluate the need for repairs, updating spreadsheets to allow the contractor to go directly to all repair sites with ease, working with P&ID,s and Isometrics.

TOTAL FINA ELF (DOLPHIN ENERGY) DEC 05 to MARCH 06
Q.C Inspector on the Mainline and Double Joint aboard the Castoro Sei. 350km of 48"sub sea export pipeline. Ensuring all procedures and specifications were adhered to at all times, completing all QA/QC documentation and filing

.
STOLT OFFSHORE AUG 05 to OCT 05
Client Rep for Stolt Offshore ensuring that procedures were adhered to at all times, and all relevant documentation was filed.
Overseeing all procedure qualifications, welder qualifications, consumables certificates, system calibrations and daily progress reports to Paris
.
SHELL JUL 05 to AUG 05
Client Rep, Combined execution of the cutter and K-17 gas development pipeline. Laying a 16" line with a 2" piggyback line.
.
BP Rhum Project MAR 05 to JUL 05
Client Rep for BP on board the Castoro Sei Laybarge on the BP Rhum Project doing a pipe in pipe lay to the BP Bruce platform, occasional trips to the Bruce platform to do the riser tie ins, duties including but not limited to ensuring adherence to all specifications and standards, third party witness to welder qualifications, internal camera inspection with laser defect finding for the root pass, monitoring both front end and back end main line welding, comprehensive report writing on a daily basis, ASA Safety audits on a regular basis
.
STOLT OFFSHORE JAN 05 to MAR 05
Welding Inspector on board the Laybarge LB200, duties including but not limited to, double joint and main line welding inspection, welder qualifications for both main line (Saturnax) and double joints ( Sub Arc )

AMEC - BP BRUCE PLATFORM. DEC 04 to JAN 05
Welding Inspector for Amec Construction installing a 30" duplex line on the CR platform, duties included but not limited to, adherence to all procedures and specifications, attended daily progress meeting with the offshore installation engineer to ensure welds were to specification
.
AGIP GAS BV, LIBYA AUG 04 to SEP 04
Rep for Saipem on board the Castoro Sei (C6) laying a 22" pipe in pipe off the coast of Libya, duties included but not limited to, internal camera root pass interpretation, utilising ground breaking technology to measure defects by way of laser and defect guidelines to ensure all welds were within the specifications
.
.
STOLT OFFSHORE NOV 03 to APR 04
Sanha Condensate Project-Angola
Q.C Inspector for Chevron/Texaco on the East Kocongo platform offshore Angola, over seeing the contractor, Stolt Offshore, doing the installation of a compression module. and associated risers, duties included but not limited to welder qualification and adherence to all Chevron specifications, at completion a punch list was established to ensure 100% compliance.
I also spent two weeks on the dive support vessel Seaway Discovery ensuring all specifications were adhered to for the sub sea riser and spool installation
.
CABGOC SANHA PROJECT - ANGOLA SEPT 03 to NOV 03
Q.C. Inspector
Q.C. for Stolt Offshore during launching and installation of 3000 ton DPP jacket from Seaway Polaris, and subsequent completion of sub sea pipelines for Chevron Texaco. Supervised SMAW and automatic welder qualification programme for jacket and pipeline welding,.. Ensured compliance to all Chevron procedures and specifications...
Also running umbilical lines alongside pipelines.

SHELL BONGA PROJECT ¡V NIGERIA MAY 03 to AUG 03
Q.C. Inspector
Q.C. for the contractor, Stolt Offshore, onboard Seaway Polaris during conventional S lay and deepwater J lay of various diameter sub sea pipelines. Witnessed pipe lay welder qualification. Co-ordinated all welding and NDT operations reviewing associated reports. Carried out daily weld audits to ensure compliance to procedures
.
O.P.S. ¡V ALABAMA U.S.A. MAR 03 to MAY 03
Q.C. Inspector
Fabrication of 8" risers at the Theodore spool base in Alabama for Chevron/ Total/ Fina/ Elf. Criticality of specification required fully documented surveillance at all stages from fit up to completion of welding, including 18 point fit up checks and parameter checks of all weld passes. Scheduled NDT and PWHT operation..

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6451 to 6500 of 10817)

Go to Search Parameters...

Brief Description

I want to work in your company to improve professional skills, to obtain an engineering position in a petroleum industry which will enable me to utilize my analytical and interpersonal skills. Engineer with broad experience in seismic exploration, especially in the sphere processing 2D/3D data.

Analysis and Design of various Structures Analysis and design of vessel

Early Career Petroleum Eng, with trilingual (Incl Arabic) and Dual Master's degree (Petroleum and Computer Science).

46 year old man who has been displaced from my employment in February 2009 due economic down turn and lack of oil and gas production in Colorado, Wyoming and Utah.

Heavy Equipment Operator

Radio Operator Offshore

Redress Downhole Service Tools for well testing job such as circulating valves, control valves and safety v alves involved. Function and pressure testing tools, cleaning and buffing tools, back load and unload tools from baskets and containers

I am working with Barrick Gold Corporation, the biggest gold mining company in the world. It is a Canadian company having 4 gold mines in my country. I work in one of the mines as a Mine Safety & Training Officer. I am looking for the job in the gas/petroleum company.

An international, multi-lingual, technically proficient Sales & Marketing professional

I wish to apply for the post of Supervisor Warehouse /Material Specialist or (Buyer) Procurement.

Position as Electro-Mechanical Designer. Open to full-time regular employment or long-term contract arrangement. Extensive experience on CADAM, CADRA and CatiaV4. Also experience with CADEX-CCD and AutoCAD 3-D Solid Modeling. Over 25 years experience.

Senior Instrumentation technical. Diploma in electronics.

I have approximately 12 years experience in oil & gas industry. I am presently considering a position change with a company offering greater responsibility and more career advancement opportunity.

More than three years of industry experience including asset evaluation, reservoir simulation, annual reserve reporting, long term depletion strategy, enhanced recovery evaluations, expert witness testimony, economic evaluation and forecasting.

Russian/English/French speaking SAP materials controller.

M.Tech (HSE), B.Tech (Safety and Fire Engineering) specialized in oil and gas sector

Petroleum Engineer

I am Technician of all types electrical switchgear panels.

onshore & offshore "jack up " Drilling supervisor /foreman

A Team Leader,Conveyor Attendant, Operator/Mechanical Technician, Responsible for Flow wrapping machines/Nordenmatic 400 for the production of Tooth Paste. Also responsible for raw material delivery using a valve system in a control room. Mechanical Engineering Technician lll certificate holder.

Negotiating oil and gas leases, joint venture, farmouts, operating agreements, Runsheets, Ownership Reports and other exploration related contracts. Communicating with company staff landmen, mineral owners, and other personnel on an ongoing basis to benefit the company's oil and gas exploration

HND in Petroleum engineering plus 5 years offshore experience

Manejo de micro-computadores y Estaciones de Trabajo. Manejo de Software Básico: Ambiente Windows, Paquete de Office, Internet Explorer. Programas: MESA, PICKIW. Dominio de Español, inglés (Básico).

Welding Inspector/ Qa Qc Inspector

I am working for GE Nuovo Pignone as contractor mechanical engineer since 8 years. I have an excellent acknowledge of the Gas Turbine and other rotating equipments as centrifugal compressor and pumps.

Well experienced Technician having an extensive experience in the maintenance and troubleshooting of various HVAC and Refrigeration Installation, seeking for a motivating position related to maintenance, construction and commissioning Processes

Petroleum Landman Seeks Work at Home from Images

6 years experience on administration with a comprehensive knowledge of clerical experience, reports, database, and onshore work-over rig materials with expertise in maintenance of oil rig materials.

BE( Elect & Instrumentation) / Diploma In Industrial Safety / Diploma In (Elec & comm) with 2.5 yrs of Exp In Steel Plant

material co ordinator/motorman

Worked in all phases of the industrial plants. In commisioning, start up and debotlenecking. As a process engineer, with experiencie in process, production, facilities and process control systems. Supervised group of 12 people, implement ISO 9000/1400, Osha 18000, economic evaluations and management

Have a progressive and responsible working experience of eight (8) years dedicated in field of piping engineering, design and drafting. Directly involved in a variety of oil & gas, petrochemical, refinery, and mining projects which starts from Estimation, Front End Engineering Design (FEED),

I have a degree in Mechanical Engineering and a Post Graduate Diploma in Business Studies. I have attainded courses in Health Safety & Environment , Sales/Princples & Strategies etc. I have also worked as a Sales Engineer and Area Sales Engineer respectively. Proficent in use of micro soft office

I was graduated in Bachelor of Science in Mechanical Engineering and my work experiences was in the field of QA/QC in construction of district cooling plant with two years in refinery construction and currently working as a Mechanical Inspector in a consulting firm.

Journeyman I & E Technician: Plant-wide installation, start-up, loop check, calibration, troubleshooting, repair, and maintenance of instrumentation and electrical systems on high pressure gas-fired boilers (produce 250lb. & 900lb. steam flow), turbo-blowers, and water-treatment facilities.

Mr. Papanna has more than 5 years diversified engineering experience in the process, petrochemical and power industries. These duties included developing specifications and requisitioning equipment, performing technical evaluations and making recommendations for purchase, and specifying all testing

Experienced business professional specializing in the development, engagement and closure of long term service business opportunities. Key strengths include strong strategic thinker, planner, managing complex infrastructure bids, managing multi-disciplinary, cross-cultural virtual teams

•Awarded department fellowship to pursue graduate studies. •Secured fourth place in undergraduate engineering. •Skilled in working with IMEX (CMG's reservoir simulator) and E100 (Eclipse simulator). •Received four promotions in a span of three years. •Prepared pipelay/installation reports

I am a geoscientist with a strong technical background with seismic processing, interpretation and analysis experience. Also experienced in shallow geophysics, field sampling, and monitor well installation for environmental projects.

5 Years of SAP Experience in Enterprise Planning, Corporate Strategy Management, Supply Chain Metrics, Data Warehousing (SAP NW – BW, BI), Strategic Enterprise Management (SEM) and Integrated Planning (IP) on NW 7.0 (2004S) & Enterprise Planning on NW07 platform , spanning industries like Oil & Gas

Diploma in chemical technology with 10 over years of experience in petrochemical industry , DCS OPERATION(YOKOGAWA CS-3000), FIELD OPERATION,Now as SENIOR PROCESS TECHNICIAN in singapore

Highly motivated and experienced Production Supervisor. Ability to supervise large and small operation teams. Computer literate. Multi tasking ability. Safety awareness within the oil and gas industry. Managment of major emergency

More than 13 years experience in design and operations. Knowledgable in Process Simulation softwares such as HYSIS, PIPESIM, PIPEPHASE and PIPENET and line and equipment sizing calculations. Preparation of P&IDs, datasheets and Cause & Effect charts. HAZOP, HAZID participation.

Welding Inspection, QA/QC Documentation, Pipeline construction, Fabrication and Installation

Nearly Eight years of Professional work experience in Project Management / Customer Services, of which Six years in Project Planning and Execution.

Over 8 years in the field of detailed engineering of Piping systems, which comprises preparation of plot plans, equipment layouts, piping layouts

Electrotehnical diploma, Operator computer license, Help programmator Fox-Pro license

Stress Engineer Proficient inNastran,Ansys, Ideas,NISa (Finite Element analysis software),C++,C,Visual Basic, Fortran etc

Working as an Engineer in the Instrument Maintenance Section of Karnaphuli Fertilizer Company (KAFCO), Bangladesh since October 2002 with all kinds of instruments such as transmitters, controllers, PLC, DCS, etc.B.Sc.Engg (Electrical & Electronic Engineering) from Bangladesh University of Engineerin

Effective planning and organizational skills including interacting with people, from upper management through hourly workers at various technical levels.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 [ 130 ] 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out