Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #78365 next resume »»
CONTACT INFORMATION:
View contact information...

Overview:
37 years of Heavy Industrial, Petro Chem, Oil & Gas, Project/ Construction Management typically as below.
* Provide management & review Contractor`s technical & construction procedures & qualifications to assure compliance with Project Specifications, Contract Terms and Conditions and Design
* Participate in constructability reviews during Engineering Phase & ensures continuity thru Construction phase
* Participates in Risk Assissment and mitigation plans
* Review & approval of PEP ( contractors execution plans )
* Input lessons learned
* Manages multiple contractors in multi craft contracts ( earth works, heavy piping and mechanical, electrical, tankage)
* Oversight of Cost Accounting & Cost Control, Contract Administration, Materials and Construction Procurement, HES, Quality Assurance & Control, Project Completion, Start Up & Hand Over, Project Close Out, Contractor / Vendor / Client Owner liason.

Education:
* Extensive experience in ASME, ANSI B 31.3, NFPA, API
* 40 Hour OSHA 29 CFR PART 1910.120 (e)(3)(I ). Hazwopper
* 8 Hour OSHA Supervisor 29CFR PART 1910.120(e)(3)(I)
* 10 Hour OSHA Construction Safety and Health
* Course on Contract Negotiation by Dr. Chester Karass
* Flour Daniel courses, welding and welding Q.C, Blueprints, Advanced blueprints,
PFD`s, PID`s, General Arangements, Mechanical Drawings, Instrumentation
* University of Alabama Building Science
* Bowdon High School graduate 1968

EXPERIENCE:
General Area Construction Manager / EPC Contracts Upstream Oil & Gas / Fluor Daniels – Chevron Pacific Indonesia/ Project Value 460MM
Direct Fluor Employee – Responsible to Chevron for all Sumatra Light Oil North / Capitol Projects, Reliability Engineering and Maintenance, Infrastructure Drilling Support, Put On Production.
Management of construction engineers staff, approx. 40, CS engineers, superintendants, HES and QA/QC directly managing the Construction Coordination of sub-contractors for all Sumatra Light North Oil Gathering stations, Gas Plants, pipe lines/ Hydro Carbon Transfer lines, new Tanks & Capitol Project additions and upgrades, & Contaminated Soil Remediation Projects. Directly responsible and report directly to Chevron for the schedule management, quality, safety & cost control for all Capitol Projects in Sumatra Light Oil which covers two thirds of Sumatra Indonesia. SLN is inclusive of Capitol Projects, Relaiability Engineering & Maintenance, and all Road and Locations works to support new well drilling and existing well works.

Site Construction Manager
Chemical Division of General Electric
Consultant to General Electric Chemical Division ( Chemical Process Plant / Waterford, New York
January 2005 thru February 2006/ PSM Project / Value 20mm
Directly responsible Design Checking, Constructability Review, Materials Take Offs & Procurement, Draft of Scope Documents and Contract Terms and Conditions Documents, Bid Process and Award for Construction Services And Materials, Project Investment and Capitalization and Expense Breakdown and accounting For General Electric, all facets of the construction installation QC, Schedule, coordination with Operating plant leaders, all safety of contractors within an operating facility, final completion And QC punch lists and turnover to operations, accounting and approval of contractors payment Requests.

Heavy Industrial / EPC
Shimizu America, Atlanta, Georgia / September 2004 thru December 2004
(short term addition project)
Site Manager/ Civil, Structural, Architectural, Mechanical / Project Value 17mm
Responsible for all Contractor Management of Site Grading, Heavy Concrete Foundations,
Building Steel Erection, Electrical, and Mechanical.
Responsibilities include Schedule, Cost, Safety, RFI`s, Engineering Schedule,
Construction. Project value 7MM

Anheuser Busch Companies, Cartersville, Ga. / May 2002-June 2004/Project Value 20mm
Resident Construction Engineer /Civil, Structural, Architectural, Mechanical
Heavy Industrial / Site Manager
Responsible for construction coordination, Constructability Review, Safety, cost control, estimating, scheduling, scope development, RFI`s & RFQ`s, Prepare Written Scope, Preside over bid process and awards of various plant and corporate projects. Assist to plant facilities manager for mechanical maintenance projects. Projects consisted of facilities maintenance issues, chilled water systems, utilities piping distribution, Architectural, Civil, and Structural,
HVAC, and basic Power Distrubution.

Anheuser Busch Companies, Madison, WI/ September 2001-April 2002/Project Value 27mm
Resident Construction Engineer/ Site Manager/Civil, Structural, Architectural, Mechanical
Heavy Industrial / Site Manager
Responsible for Total site management of 27mm Concrete Tilt Up Green Field multi craft
Project Including Design & Constructability Review, site development, big pipe sewer and water distribution, electrical Distribution, scheduling, RFI`s & RFQ`s, Safety, cost control, and start up. Project duties also Included all mechanical aspects of installation of new cooling towers, all refrigeration equipment and air compressors and distribution all site development.

Anheuser Busch Companies, Houston, Texas/May 2000 -August 2001/Project Value 200mm
Resident Construction Engineer / Civil, Structural, Architectural, Mechanical
Heavy Industrial / Site Manager
Responsible for construction management, cost control, scheduling, scope development, Constructability Review,Scope Document Preparation, Bid Process and Awards, RFI`s & RFQ`s, and Safety of Seven multi-craft projects with a combined value of approx. 100mm. Work included
Complete demolition of all piping and conveyance systems to demo and replacement of bottle line 4 and line 5 and the re-installation of all Steam, Air, Water, Chilled Water piping systems and bottling equipment, as well as bulk truck unloading equipment, installation of two new pallatizers, all new pallatizer pick offs and installation of new traffic office.

North American Stainless Steel 1997-1999
Site Manager / Construction Manager / Project Value 7.5mm
Heavy Industrial / Site Manager
Responsible for all aspects of direct hire construction of 125TH walking beam furnace for North American Stainless Steel in Ghent, Ky. Duties included cost and schedule management, Estimating, Q.C., safety, client liason with French engineering firm.
Work included installation of all mechanical aspects of a walking beam furnace and
Hydraulics, all water, Chilled Water, gas, air, distribution piping and equipment for the entire mill.

Bel Can Manpower Services, Denham Springs, La. 1996-1997
Construction Site Manager consultant to Conoco Phillips Petroleum / Chemical Division
Lake Charles, La.
Heavy Industrial / Oil & Chemical Refining Process Plant
Responsible for design review, contract review @ rewrite, drafting of contractors qualifications, Permit aquisition and overall management of construction of a one hundred thousand Sq. Ft. Laboratory facility with adjoining site development.

CDI Spectrum Engineering, Baton Rouge, La. 1994-1995
Construction Manager / Site Manager
Consultant to Castrol Oil North America for coordinating projects in an operating plant.
Duties Included scheduling, quality control, safety, punch out, start up, estimating, and contract Negotiation as the owner`s representative for plant expansion in Port Allen, La.
Project Scope: Installation of new storage tanks, extensive piping additions and tie ins, equipment relocation and new equipment, design and Installation of new rail car load out facility.

The P.Q. Corporation, Philidelphia, P.A. 1988-1993
Construction Manager (direct hire employee), Start Up Coordinator, Maintenance Coordinator.
Responsible for overseeing construction, scheduling, cost control, HES, and Q.C. for
Construction of five new chemical plants in six year span.
Projects values from twenty seven million dollars to 50MM. This included contract
Negotiation Bid process. In the field, expediting, invoice approval, coordination of engineering staff, construction supervisors, And support personnel, coordinating start-up engineers, vendors and plant projects. The project scopes Included the building from the ground up, installation of all piping, equipment, electrical systems for five new plants within a five year period.

H.R. International, Edison, N.J. 1987-1988 ( An EPC Firm)
Project Engineer for General Electric Corp.
Heavy Industrial / Chemical Process Plant
Project Scope: Included scope development, project estimate, Design staff management,
Bid package Preparation and bid Awards, material take off and procurement, construction management. Project value, 7.5 mm. The project scope was the demolition and replacement of Twenty Three Thousand feet of process pipe In an operating facility and the demolition and removal of Thirty large storage tanks from an Operating tank farm.

H. R. International, Edison, N.J. 1986-1987
Construction Manager / Heavy Industrial Polymer Plant
Managed all mechanical crafts for a direct hire project for Dart Inc. Included installation of one hundred twenty thousand Feet of piping, and six hundred tons of equipment for a plastics polymer plant, all progress and Q.C. tracking and documentation, approval of all
RFI`s and Field Orders.

Flour Daniels, Greenville, South Carolina 1970-1986
Heavy Industrial
Various Power House, Pulp Paper, Chemical Plant projects across the South East. Quality
Control / Progress Reporting / Scheduling.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1301 to 1350 of 10916)Go to Search Parameters...
Brief Description
Experienced, results oriented, safety minded manager
Oil & gas consultant with 29 years of experience and supervision on land, platform, jack-up and semi-submersible rigs. Proactive leader with strong communication skills, both verbal and written. Effective problem solver and decision-maker.
Structural Designer
diploma in mech.eng, NVQ-level -3
Experience Drilling Supervisor, Land & Offshore
Rig Manager / Mechanical Engineer
Twenty five years in the Oil and Gas industry all of which was in the discipline of Project Services and Controls, providing leadership in Estimating, Cost Control, Planning, Scheduling, Contract Administration services. In-depth exposure in Heavy Oil, Natural Gas, Petro-Chemical, Compressor Package
Senior construction manager
Oil & Gas Landman
8 years of experience as MBBS doctor with additional skills in administration, project management, liasoning, coordination, HR management, quality monitoring, emergency health care, Trainings, Lecturing, critical reviewing and remote place health services.
PETROLEUM GEOLOGIST with experience in exploration, development, acquisitions, divestitures, and operations. Experienced in clastic, carbonate and salt environments. Available to travel for either permanent or contract work.
Chartered Accountant, U.K Citizen, Multi-Lingual 4 Languages incl. French, Mining Experience in French and English Speaking Africa
Suitable to work in process/operation area as technician (field & panel op) supintendent, etc.
Seismic field processing on Promax for 10 years and actually short experience on CGG software
Over 23 years experience in engineering and project management in Oil & Gas, refining, and petrochemical environment. Extensive knowledge in particular aspects of project engineering, mechanical and maintenance engineering. Key engineering competences include procurement of major capital equipment.
O&G prospect/areal HC content assessment by a hand-picked series of near-surface, geochem-related, composited anomalies very indicative of commercial deposits.
Over twenty-five years of work experience in the Oil, Gas and Petro - Chemical Industry,
Over 24 years global experience in reservoir development and management of oil and gas condensate fields.
Snr Project Engineer with Lead Process Engr / Manager and multidiscipline experience over 20 years in major international oil / gas & petrochem projects with leading Engineering and Operators in Europe ,US, Africa (Nigeria) and Mid East.
Petroleum Engineer with over 30 years of experince in oil and gas fields operation and maintnanace, including design and construction of surface facilites(Pipeline)
QA/QC ENGINEER
An experience individual with excellent knowledge of Sales/Marketing, Freight handling, Imports/ Exports Management with the objective of achieving organizational goals and making it a strong profit center seeks an opportunity in managerial capacity
I offer a broad range of upstream petroleum business skills and leadership experience covering exploration/development planning and LNG project execution, subsurface and production facilities planning, economic analysis, strategic planning, commercial/legal negotiations and corporate communications.
Senior Project Manager, International Industrial Multi-Disciplinary &Muli-Cultural Projects
Negotiations, planning, economics in international joint venture gas and midstream projects for past 14+ years. Started career as reservoir engineer with Exxon.
Trade and degree qualified welding engineer and m,etallurgist with 25+ years experience in petrochem, power, onshore rig contruction and computerised welding documentation management.
Analytical chemist in the fields of oil & gas, petrochemical, fertilizers, pesticides and pharmaceuticals.
Technical / Lead Safety Engineer
NDT inspector LVL II
11 years experience in offshore construction, field engineering, planning, offshore and onshore project scheduling, field supervision for installation of offshore platforms pipelines spools, pigging and hydrotesting. Preparation of installation procedures, rigging calculations, material procurement
With 12 years in the Oil Field Industry, working in Brasil as well as other countries such as, Colombia, and USA. I became proficient and experienced in Completions, such as Sand Control (Gravel Pack, Frac Pack, High Water Pack, Horizontal Gravel Pack) Upper Completion (single/dual string), Expandab
Network and security Engineer
HR Officer, Recruitment and Administration, Hiring Officer, Hiring Consultant, Marketing
Degree in Petroleum and Natural Gas Engineering. New Mexico Institute of Mining & Technology (NMT), Socorro NM.
Core business is scaffolding; Consulting, controlling, supports, execution business. in Oil & Gas industry and construction industry
Nearly 15 Years QA/QC composite Experince in Electrical Manufacturing as well as Construction of Oil & Gas Central Processing Platform
ASQ Certified Quality Technician with over 8 years Experience in the development and implementation of Quality plans and manufacturing procedures used in the Petroleum and natural industries for Rotary drilling equipments. Regulatory compliance, QA/QC, NDE, Material testing and Inspection
Human resources
A highly motivated professional with 10+ years of diverse hands-on experience in conceptual process design, technical services and developing/upgrading of upstream oil processing facilities. Worked on petrochemical projects, oil sands technologies and water/wastewater treatment plants from front end
Piping Designer with 12+ years of experience in piping design & detail engineering involving Equipment layouts, Piping layouts, Piping isometrics, Tie-in Schedule and Pipe supports for Onshore & Offshore Oil & Gas, Power and Petrochemical Plants. Have good knowledge of all national & international c
A senior logistics specialist - currently pursuing MBA - with 9+ years of track record in administration, logistics, contract and fleet management with cross competencies in MIS report analysis. Seeking a challenging position with a dynamic organization to apply accrued expertise in achieving tangib
Seeking suitable opportunities in the field of CP including offshore and onshore -industries, oil companies, contracting companies and power sectors, to harness my technical skills & acquired knowledge- to it's best, so as to bring out the best in me and thus to attain the highest degree of progress
Current Position as Air Separation Unit Technical and Process Specialist for Petronas Gas Berhad with previous experience with Air Products Chemical Incorporated and Messer Griesham. Some college from Texas Tech University, Lubbock, Texas USA.
Process Engineer Resume Oil and gas
Heavy Equipment Mechanic Journeyman including Redseal certification. Ten years experience on machines and equipment such as coaches, trucks, trailers, lifts, and others. Also knowledgeable in areas such as A/C, Electrical, Hydraulics, and Air Systems.
Piping Field Engineer – Technical Office
I have generated prospects in several basins. I am a proven oil finder and a team player.
14 years experience in welding technology ,Have extensive experience in welding(SMAW ,GMAW,FCAW ,SAW,TIG etc) of CS ,Alloy Steel ,C-Mn steel , and SS , DUPLEX STAINLESS STEEL , CU ¡VNI , NI ALLOY AND OTHER CORROSION RESISTANCE MATERIAL
Bachelor of Commerce, Budgetary Control, Inventory Control, Planning & Analization of materials, setting up new storage system, Vendor development, Administration skills.
PETROLEUM ENGINEER WITH 11 YEARS OF INTERNATIONAL EXPERIENCE
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   [ 27 ]   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com