Resume - 35 years of experience in the process industry working for engineering firms, eq...

Misco Jobs

Resume #78454

CONTACT INFORMATION:
View contact information...

SUMMARY OF EXPERIENCE

* 35 years of experience as a Professional Mechanical Engineer in the process industry to include project and design engineering responsibilities with compressor manufacturers, engineering design companies, natural gas utility, and basic chemical company.
* Lead project mechanical engineer for plant expansions and debottlenecking projects.
* Developed inspection criteria, and performed inspections for major process equipment to include compressors, turbines, large motors, and vessels being built or repaired.
* Performed equipment calculations for feasibility studies and troubleshooting.
* Developed corporate procurement specifications for centrifugal compressor, pumps, gears, cooling towers and other process equipment associated with the chemical, refinery, and gas transmission industries for companies listed below.
* Senior engineer mechanical engineer responsible for the selection and application of a power generation/heat recovery system, and gas compression for an offshore platform.
* Responsible for equipment modifications, replacement, and repair.
* Reviewed pipe stress analysis and pipe designs for compliance to specifications.
* Developed nuclear radiation monitoring systems for a new nuclear process plant
* Provided engineering assistance during plant start-ups.
* Knowledgeable of codes and standards to include: API, ASME, ANSI, TEMA, and NEMA.

WHERE I HAVE WORKED

* Wink Companies, LLC
* Occidental Chemical
* Fluor/Daniel
* M.W. Kellogg
* Southern California Gas Company
* Dresser-Rand
* Delaval
* Bechtel Corporation for the Department of Energy
* Wellman Chemical, Inc.

EDUCATION, SOCIETIES, AND LICENSES

* Graduate of Milwaukee School of Engineering (BSME), 1973; additional engineering studies at California State Universities of Hayward and Long Beach; Former ASME Section Chairman with the New York Southern Tier Section; Registered Professional Mechanical Engineer in Wisconsin.

CAREER EXPERIENCE

WINK COMPANIES, LLC (3/2006 to 1/2009)
8641 UNITED PLAZA BLVD.
BATON ROUGE, LA

Senior Staff Mechanical Engineer

* Lead mechanical engineer for the following projects o Boiler expansion project for Valero, St. Charles Refinery o Wet gas compressor system for Sunoco, Eagle Point, NJ
o Off sites project for Sunoco, Tulsa, OK
o Small projects for Valero, Krotz Springs, LA, and Alon, Krotz Springs, LA

ENGINEERING TECHNICAL GROUP (ETG) (11/2005 to 12/2005)
NORWOOD, MASSACHUSETTS (contract engineering
Company)

Contract Project Mechanical Engineer

* Resolved maintenance and logistical problems at Wellman, Inc. a manufacturer of polyester. Wellman's plant is located in Bay St. Louis, Mississippi, and was damaged by hurricane Katrina. This was a short-term engineering contract.

SELF-EMPLOYED (2001 to 11/2005)

DEPARTMENT OF ENERGY (1999 to 2001)
Savannah River Site, (SRS)
Aiken, South Carolina

Contract Design & Development Mechanical Engineer

* Developed P&ID's, and system designs for personnel protection systems at a nuclear processing facility. Systems detected the presence of tritium, beta, and gamma radiation. Developed cost estimates and coordinated the design engineering.

OCCIDENTAL CHEMICAL CORPORATION (OXYCEM) (1989 to 1999)
Corporate Engineering
Houston, Texas

Principal Mechanical Engineer

* Project engineering:
o Supervised engineering performed within Corporate Engineering, and by engineering companies.
o Managed project costs and schedules.
o Wrote specifications and scope of work for plant construction.
o Evaluated equipment and construction bids, wrote requisitions, and coordinated the application engineering.
o Responsible for project and design engineering, plant engineering support, and start-up assistance.
o Participated in project design reviews.

* Developed Corporate equipment specifications and in-house technical assistance for the following:
o Centrifugal, rotary, and reciprocating type compressors o Industrial engines and emergency electrical power systems.
o Steam turbines, gears, and lubrication systems.
o Pumps, process water-cooling, and industrial refrigeration systems.
o Induced and forced draft fan systems for steam boilers.
o Forced draft evaporative cooling towers and air-to-air heat exchangers.
o API-541 induction motors.
o Field erected API tanks, and ASME code vessels.
o Industrial ventilation, control rooms HVAC, and liquefaction refrigeration systems.
* Performed pipe stress analysis to resolve equipment failures, and reviewed piping plans.
* Developed inspection criteria and performed inspections at equipment manufacturers.
* Technical consultant responsible for assisting plant operations, and project management with issues concerning rotating equipment selection, equipment troubleshooting, risk assessment, and repair

M.W. KELLOGG CORPORATION (1988 to 1989)
Houston Texas

Senior Mechanical Engineer

* Developed equipment specifications, and performed application engineering for the design of a coal slurry transport system used in the power industry.

SELF-EMPLOYED (1986 to 1988)

FLUOR ENGINEERING AND CONSTRUCTION (1984 to 1986)
Advanced Technology Division
Irvine, California

Principal Mechanical Engineer and Team Leader

* Evaluated designs for nuclear waste disposal, and storage.
* Assisted in the development of a computer program to model the performance of various types of power generation steam turbines.
* Evaluated the application of large adjustable frequency motors for process equipment installed in chemical plants.

SOUTHERN CALIFORNIA GAS COMPANY (1983 to 1984)
El Monte, California
(Central Engineering Center)

Principal Mechanical Engineer

* Responsible for the application and project engineering necessary to support "operations" for gas engine driven compressors installed in booster stations, and for underground storage sites for a natural gas utility company in Los Angeles, California.
* Reviewed technical proposals for a replacement gas turbine recuperator.

FLUOR ENGINEERING AND CONSTRUCTION COMPANY (1981 to 1984)
Irvine, California

Senior (lead) Mechanical Engineer

* Developed the specifications and performed the application engineering for a gas turbine power generation and heat recovery system, gas gathering compressors, and pumps installed on an offshore drilling and gas gathering platform.
* Lead mechanical engineer for the reconstruction of a fire damaged petrochemical plant. Developed the repair and replacement specifications, for compressors, pumps, and heat exchanger equipment.

TRANSAMERICA DELAVAL COMPANY (1979 to 1981)
Gas & Diesel Engine and Reciprocating
Compressor Division
Oakland, California

Manager of Compressor Engineering

* Responsible for the selection, design, and application engineering of process reciprocating compressors.
* Provided sales, field service, and manufacturing support for new and installed compressor applications.

INGERSOLL-RAND COMPANY (1973 to 1979)
Painter Post, New York

Project and Design / Development Engineer

* Project engineer responsible for equipment selection, application engineering, marketing support, and troubleshooting of process reciprocating type compressors.
* Design and development engineer involved in design of a new high-pressure compressors used in the production of low-density polyethylene.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 401 to 450 of 10917)

Go to Search Parameters...

Brief Description

ArcGIS 8.x/9.x, ArcGIS Server, ArcObjects, Virtual Earth, C#, VB.NET, ASP.NET, VB6

Control & Instrumentation Engineer

Design Expert, Team Leader, Hardworking, Cost Control, Result oriented Instrumentation Engineer who can work on FEED/DD projects with equal proficiency.

Research & Development, Formulation, Manufacture, Maintenance, Project work

Over 16 years of wide and varied experience in the area of engineering consultancy for Design and Detail Engineering for Oil & Gas, Offshore / Onshore, Refinery, Petrochemicals, Alumna Plant, Pipelines, Gas Processing & LNG projects. I am fully conversant with all types of Process Control & Instrume

Skilled technician expert in Installation, Commissioning, Start-up and Maintenance over machines and equipments for Petrol, Pharma, Chemical and Oil&Gas sector.

WELL COMPLETIONS AND TESTING ENGINEER

engineering-mechanical-management- oil & gas

Professional Engineer in corrosion, NDT, and failure analysis with 14 years experince

Skill Structural Designer with 20+ year of experience

Senior Manager educated to Bachelors degree in Welding Engineering with over 20-yrs of experience in the Oil/Gas Industry

22 years experience in engineering,construction,fabrication,installation both onshore and offshore for refinery, Petrochemical, Oil & gas, LNG and power plant

Bachelor of Civil Engineering with Professional Designation

Long skills for work-over & completion well site supervisor , coiled tubing & snubbing too

Electrical / instrument designer

PDS and Smart Plant, Auto Plant(3D), Microstation, AutoCAD, MS Excel, Word etc.

Experienced Well site & Ops Geologist. Adaptable, strong inter-personal & communication skills, multi-disciplinary team worker. Follow up Operations Geology activity for Operated & Non-Operated assets, supporting Drilling & Completion. Can work independently with minimal supervision. B.Sc, Geology

Industrial Eng. with master degree in HSE. Title obtained: HSE eng. Specialist

Financial Accounting, Costing, Budgeting and Project Accounts

Positions - Project Manager, Project Control Manager, Planning Manager and Director in the area of process simulation, predictive control and risk. Hands on, onshore plants (oil, gas), aluminum, ammonium nitrate, offsite and utilities, offshore platforms and pipelines. Capex from $100M to $5Billion

A production/well completion engineer with over 20 years experience in Canada and overseas

Drilling Financial Controller responsible for all drilling expenditures

15 plus years of Rig and Merchant Naval experience with good administrative and communication skills as a Radio Officer/Purser/Fleet Administrative Officer on board foreign going vessels and rig. Have good experience in handling chopper program, boat program, material movements, crew changes, crew t

I have Very good Experience in the Petrophysical Operation, Studies and Well reservoir Survillance. Have experience in QC/QA of integrated studies. Have leadership experience

Geoscientist

Honor degree in Mechanical Engineering form UK and have gained more than twenty five years experience in the fields of major sub-sea assets management, assets integrity, offshore operations, projects and contracts management, inspection, maintenance and marine related projects.

Marine Pilot/ Mooring Master/ Loading Master

Sr. Technical Writer with Software, O&G expeience, PMP Cert

Materials Controller/Warehouse Supervisor/Logistics Supervisor

Multi skilled engineer, Technical Advisor, Mud Engineer

15 years Mechanical Engineer within Oil / Gas & refinery industry, inclusive 5 years maintenance experience; 5 years for nuclear power project; P.Eng of APEGGA, Canada

Can perform both technical work and sales work involving oil/gas industry more specifically as an advisor, planner, support or salesperson.

Drilling Engineer – DCWO planning, programming, engineering, operations evaluation, performance analysis; deep HPHT gas wells, high deviated, ERD and horizontal oil wells, sidetrack wells; land operations; harsh desert (Middle Asia) and arctic (Siberia) environment; English-Russian-Slovak

Over thirty years of experience in major US and International design/build facilities programs where responsibilities have included senior-level Project Management, Construction Management, Engineering and Design Management, equipment selection, installation and start-up. P&L responsibility for all

Senior Mechanical Engineer experienced in detailed mechanical / thermal / process and E&I design of Fired Heaters, Reaction Furnaces, Reformers, SCR’s WHRU’s, Boilers, Incinerators, Flares and associated ancillary equipment. Very strong E&I, DCS / PLC & BMS skills.

By working 17 years in the field of petrochemical field, I experienced all kinds of key projects like FCCU, Hydro-cracking unit, Hydro-treating unit and have expert ability to do piping static and dynamic stress analysis. Also I have five years working experience as a mechanical engineer in refinery

35 years of experience in the process industry working for engineering firms, equipment manufacturers, chemical company

I am proficient in researching title and court records, including but not limited to conveyances, mortgages and other indexes, along with curing said title when needed. I am able to determine from said title or records mineral and/or surface ownership in Louisiana, Mississippi, Alabama and Texas.

Conducting a piping training program from zero skill up to a skill trainees supervising the assigned work from planning, organizing, leading and controlling. Performed piping work activities from designing and drawing the piping tie-in to existing pipelines, drawing various structural platform

Twenty years of professional experience in, design, consultancy, construction and maintenance, covering a broad range.

25 years of experience in construction, installation, commissioning, testing and maintenance of Electrical, Electronics and Instrumentation equipments and controls in Petrochemical Industry

Have more than 20 years experience in Piping Design and Engineering including Stress Analysis and Piping Materials Control for various projects in petrochemical plants, refineries and commercial chemical plants. Presently working in Worley Parsons (Colt Engineering Corporation), Calgary, Canada

A challenging position in a result-oriented company that seeks an ambitious Person, where acquire professional skills and devotion towards safety on priority, sharing of knowledge as a learning point and grow with the company in allocated budget and high safety/quality services to the client.

A result-oriented and talented professional with an extensive experience 26 years in the oil & gas industry . Expertise in commissioning, DCS control room operations, oil refining processing , crude oil & gas processing, oil & gas operational environment.

PMS-Planned Maintenance and Spares & Purchase Database administrator and building.

Rig Manager/ Drilling Superintendent/ Drilling Supervisor.

Over 18 years experience in 2D and 3D seismic data processing. Processing land desert and mountain data. Processing experience gained in Geofizyka Krakow Ltd, WesternGeco and CGGVeritas. User knowledge of Unix, Linux , excellent Omega SPS and Tango, basic ProMAX. Good MS Office skills.

Advanced Process Controls, RealTime Process Information Systems, LIMS

PROJECT MANAGEMENT, CORROSION & MATERIALS,INSPECTION & INTEGRITY ENGINEER/MANAGER

More than eighteen years of experience in premium International Oil and Gas Engineering Consultancy Companies within the field of Process Safety, Technical Safety and Loss Prevention.

First 1 2 3 4 5 6 7 8 [ 9 ] 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out