Resume - 24 years experience in completions and workovers.

Misco Jobs

Resume #78571

CONTACT INFORMATION:
View contact information...

HIGHLIGHTS OF QUALIFICATIONS:

I have over 24 years of oilfield experience performing workovers and completions on oil and gas wells. Well site Supervision over the last 12+ years has been expanded across the Northern, Foothills and Central regions of Alberta and NE British Columbia on well depths up to 4000 meters, formation pressures upwards of 38.0 MPa and temperatures over 100 Celsius. I have also had some experience with completions and re-entries on drilling rigs and I have also worked with Coiled Tubing Units on open hole completions.

ƒæ Paraffin wax stimulation¡¦s.
ƒæ Vast Computer knowledge.
ƒæ Heavy oil workovers and completions.
ƒæ TCP guns.
ƒæ Horizontal workovers, completions and N2/CTU cleanouts.
ƒæ Openhole completions.
ƒæ Stimulation's with Penetrators Canada.
ƒæ Gas well testing.
ƒæ EOR work on horizontals and deviated wells.
ƒæ Pressure survey logs.
ƒæ Chem frac stimulation¡¦s.
ƒæ Tubing inspections.
ƒæ Gelled hydrocarbon sand fracs and acid fracs.
ƒæ Slant well workovers.
ƒæ Various critical sour gas and oil well operations {+20% H2S}.
ƒæ Snubbing operations.
ƒæ Pump to surface and hydrostatic bailer cleanouts.
ƒæ Abandonment's & Re-Entries.
ƒæ Cement squeezes and recompletions.
ƒæ Fishing experience.
ƒæ Air Drilling open hole completions.
ƒæ Disposal and injection wells.
ƒæ Slickline and production logging.
ƒæ Poly/CO2 fracs.
ƒæ Dual string work over and fishing jobs.

ƒæ Experienced with rod pumps, p.c. pumps and heavy crude pumps.

ƒæ Coiled tubing cleanouts and frac stimulations.

ƒæ Re-entry on an existing open hole horizontal oil well.

EMPLOYMENT HISTORY:

October 1996-Present Independent Completions Consultant

Workovers, completions, re-completions, re-entries and abandonment's across Western Canada with various oil and gas companies. The last 12 years have been spent working in the Deep Basin/Foothills area of Alberta. Experienced in all types of servicing activities on sweet and sour oil and gas wells. Was accepted and cleared to move to Saudi Arabia to work for Saudi Aramco, before 9/11. Chose not to move after the attacks.

September 1996-October 1996 Leyen Oilwell Servicing

Rig manager and supervisor of rigs on various workovers and completions.

June 1983-September 1996 K&S Oilfield Servicing/Family Owned

Started as roughneck and advanced to rig manager/operations manager. Workovers, Completions and Abandonment's in and around the Lloydminster area. Work in Chauvin and Provost fields. EOR projects for Mobil Oil, Home Oil and Probe Exploration. Extensive experience in heavy oil, shallow gas well workovers, completions and recompletions. Office management duties including worker orientation, safety programs, crew organization, parts and supply ordering for rigs, clerical duties and payroll duties. Some mechanical duties included rig repairs and maintenance, welding, fabricating, light oilfield equipment hauling, sandline and drill line spooling and running an anchor truck.

ACHIEVMENTS and DEVELOPMENTS:

„« Well Service BOP
„« International Well Control Forum: Surface BOP Stack Drilling Supervisor
„« Safety Oriented First Aid
„« H2S Alive
„« WHIMIS & TDG
„« OH&S Accident Investigation Seminar
„« Regulatory Awareness for Wellsite Supervision
„« BJ Services spring training in Acidizing, Cementing, Hydraulic fracturing and
Coiled tubing Underbalanced drilling
„« Level ¡* A¡¨ Gas Process Operations: S.A.I.T. correspondence
„« Oilwell logging interpretation: P.I.T.S.
„« Openhole log interpretation course: Schlumberger
„« CoDesign, Maxwell, Dims, Wellview, Windows and Office computer programs
„« Introduction to Environmental Considerations in the Oil Industry: P.I.T.S.
„« Safety Training for Job Site Supervisors: P.I.T.S.
„« Level 1 Confined Space Entry
„« L.E.L./Hydrocarbon Gas Detection training
„« Ground Disturbance training
„« Devon Drilling & Completions Safety and Loss Control Orientation

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2051 to 2100 of 10902)

Go to Search Parameters...

Brief Description

Dear Sir, I am looking for a job.Thanks for your email,

Over 30 years in oil and gas pipeline inspection. Welding and NDE CSWIP 3.2 CSWIP RT UT MT + ATTO

Petroleum engineer with 28 years experience. Primarily field exploitation but includes drilling, production, reservoir and facilities. Overseas for 14 years working on properties in Pakistan, Indonesia and New Zealand. Able to work under conditions with little support staff or management supervision

I have a Bachelors degree in Chemical Eng with over 20 years experience in Safety, Chemical Plant Operations and Process Engineering in multi national chemical companies like EXXON, Ciba-Geigy, & Shell. Presently working as Senior Process Safety Engineer with a leading company in Saudi Arabia

M. Tech (Electrical Engineering) Over 17 years experience in Design, construction and commissioning in Oil & Gas, Petrochemilcal and Power plant

32+ years Civil Engineering experience on Public Works, Utilities, Industrial, Commercial and Residential projects. Experienced in streets, highways, water systems, sanitary & industrial sewers, airports, site development, grading, drainage, underground piping and specifications

Drilling Engineer . I worked as a well site-drilling engineer, drilling supervisor, operations drilling engineer, drilling superintendent and promoted to drilling engineer specialist, after receiving PhD in Operations Management

Mechanical Engineer (degree) having over 24 years experience in Planning and Maintenance in large petrochemicals, oil/gas facilities. Specialized in Maintenance Planning and CMMS (Maximo).

I am a qualified Electrical engineer with a vast exposure of more than 21 years in the field of Detailed Engineering ,Operation /Maintenance,Erection/commissioning,Testing etc in search of a suitable job in UAE,Qatar,Oman

Sr. Piping/Hvac Designer with over 25 years of experience with a solid 3D modeling experience mainly in AutoCad. Currently studying Cadworx at home using a tutorial from Cadworx.

Dear sir, I would like to submit my application form for a suitable post of production engineer. Here is my CV below. If you want other document or information, please let me know.

Mechanical/Petroleum Engineer with 20+ years of experience in artificial lift applications encompassing ESP and PCP (mainly Progressive Cavity Pumps). Development of programs to select PC Pumps and automation/controlling of PC Pump Systems based on surface data such as axial load and/or torque.

Principal Process/Facilities Engineer and Project Engineer/Manager Bachelor's Degree Chemical Engineering University of Oklahoma 1976 and MBA Studies Registered Professional Engineer American Institute of Chemical Engineers Gas Processors Association

Seasoned professional with extensive and diverse experience in the petroleum industry, looking for a challenging and rewarding operations supervisory position. Interested in either domestic employment or international rotational assignments. Will consider domestic relocation.

Control, Safety Systems and Instrumentation Design / Maintenance / Operations Engineer

EXPERIENCE:Experienced in the design of the following systems: Fiscal Oil and Gas Metering,Offshore / Onshore,Fire & Gas/ESD,DCS, SCADA ,Telecommunication,Compressor Anti-Surge,Subsea Controls,Thruster Controls,Ballast Controls,Dynamic Positioning Systems,Hydroacoustics,Winch Controls.

Pipeline Engineers, Project Engineers, Project Managers

Quality, Health, Safety and Environment Manager

I am expert in pre-commissionnig, commissioning, start up petrochemical plant spcialy in ethylene plant, consruction, field engineer familar with engineering and procurment activity, computer kwnolage, opration ethylene plant

Completion / well services /Intervention Supervisor

design of telecommunication systems namely SDH, DWDM backbone, OTN transmission systems, Microwave communication systems, FTTH systems like GPON, Metro point-to-point Ethernet, PAGA systems, UHF radio, CCTV, IDS systems for Service provider networks, business enterprise, Oil & Gas networks.

Experienced Manager with Land, Marine and North Slope experience

I am Chemical Engineer over 18 years of experience in all aspects of combined cycle chemistry, chemical/water treatment operation, quality control and analytical services as Plant Chemist/ Quality Control Supervisor in co-generation power stations. I am a Canadian citizen and willing to relocate.

I am applying for welding supervisor and i have 15 year experiance in welding

Maintenance, Installation, Comissioning, Calibration, and Design And Documentation.

Manager shift Combined cycle power plant

Drilling Engineer, 10 years experience, hpht experience, Casing design, advanced well design, drilling fluids, directional drilling, drilling software,

I have 17 years of experience and presently working with Saudi International Petrochemical Co (Sipchem). I have got specialized Skills in maintenance planning and scheduling work process control, CMMS SAP R/3 PM module, Primavera P3 / MS project, RCM, Development and implementation of maintenance

Geologist with large experience in oil and gas exploration and development-Offshore experience and TDC unit manager and well site

Certified Welding Inspector (aged 30 years) with more than 10 years experience (Six years in Saudi Arabia having valid Driving License , Singapore & UAE) Oil & Gas / Petrochemical Projects & Semi-Submersible Rigs, Offshore / Onshore Process platforms seeks a challenging position in Inspection Field.

Performance driven procurement and logistics manager offering 14 years expertise in reducing costs while increasing efficiencies in international production and exploration operations. Builds and leads internationally diverse supply chain teams.

3D models PDS, Smart plant Review, PDMS, Autocad, Miicrostation, isometrics, Orthographic Drawing Production

Having 16 years experience in the oilfield, I am a highly motivated, conscientious and experienced professional with a proven ability to work beyond the parameters of the role and to prioritise effectively to meet deadlines.

PRIMAVERA, M.S Office, AutoCAD-2007

Mud Engineer

Total 12+ years of experience (8 Years in India & 4+ Years in Middle East) in Quality Assurance / Quality Control, Inspection and Welding Engineering from Raw Material stage to Final Stage in Fabrication, Construction, during Shut Down / Maintenance, Repair / Renovation work in Oil and Gas, Petroche

Bsc of mechanical engineering 1994, onshore and offshore rigs expernice, joy stick touch screen rigs

Graduate Chemical Engineer with 08 years experience in field of Internal Corrosion and Chemical treament in oil and gas field.

Post Applied for: Planning Engineer / Sr.Planning Engineer (Primavera and MS-Project).

SOFTWARE SKILL: PRIMAVERA-P3 ,P5 ENTERPRISE , P6 PROJECT ENTERPRISE V.6.0 AND PM+

Directional Drilling Operator,Locator and Site Supervisor.ITI Electronics

Seeking A Challenging Overseas Position in a professional org MSProj & Premevira

Geophysicist with more than 20 years experience, out of which 9 years in marine seismic data acquisition, QC, Party Manager & HSE. Good academic background with an M.Sc. in Geophysics and MBA in Admin.Management, with wide experience working in 2D & 3D seismics.

A highly experienced and versatile project management and professional engineer with over 15 years of engineering and project management experience in the Oil and Gas industries. Extensive experience in various types of oil and gas projects.

Landman work; Due Diligence; Assignment breakdowns; Figuring ORRI, NWI, NRI; Curative;Title research; Title abstracting; Ensuring complince with governmental and enviromental regulations; Acquisitions; Right of way; Leasing; Geophysical permitting; Mapping skills; Extensive computer knowledge

Algerian petroleum geologist with +8 years of experience in the area of petroleum exploration and geomechanical engineering. Looking for an international carrier in the area of petroleum geology or geomechanics

During 8 years experience in Oil & Gas industry, I was fully in charge of Reservoir Engineering. I have done 3 reservoir simulation jobs , PVT Analysis, Static Pressure Analysis, Transient Pressure Analysis, Reserve Estimation, Material Balance, Decline Curve Analysis ,field job supervisory

A. Competencies/Skills for over fourteen (14) years of experience in different projects as Crane Operator and Heavy Equipment Mechanic a. ARAMCO-Certified Crane Operator in oil and gas wells for all required works in drilling and rig moving b. Qualified Crane Operator for underground civil works c.

24 years experience in completions and workovers.

Well site supervisor for 4 years specilizing in horizontal, directional, underbalanced, reentry wells.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 [ 42 ] 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out