Resume - Post graduate in chemical engineering with impressive skills and work experience...

Misco Jobs

Resume #78605

CONTACT INFORMATION:
View contact information...

SUMMARY
* Post Graduate in chemical engineering with over two years of total work experience.
* Proficient in creating and simulating PFDs using Process Simulation software Aspen Plus (V 12.1),
PRO II (V 3.2), Hysys (V 3.2).
* Proficient in OS, MS Office Works, P&ID, MPC, DCS & MATLAB.
* Excellent Analytical, Communication, Interpersonal and Organizational skills.
* Ability to manage multiple tasks under tight deadlines and to work as a committed individual and a motivated team player.
* Innovative problem solver, hard worker and a fast learner.

EDUCATION
Master of Chemical Engineering, Lamar University, Beaumont, TX GPA 3.66/4.00

Bachelor of Chemical Engineering, JNTU, Hyderabad, India GPA 3.24/4.00

WORK EXPERIENCE
Sept'07-Sept'08: Research Assistant in Department of Defense's DAAB (Deployable Aerobic Aqueous Bioreactor) Project, Lamar University.
* Assisted a professor in the DOD sponsored research work aimed at creating a new wastewater treatment system.
* Performed cultivation of seven bacteria and observed their performance on the treatment of wastewater by doing result oriented analyses like Optical Density measurements, BOD, COD, TSS etc.
* Prepared daily reports for the experiment results and presented them in the weekly team meetings.
* Responsible for placing purchase orders and maintaining records for laboratory equipment and supplies.
* Worked with state-of-the-art laboratory equipment like Incubator, Spectrophotometer, Centrifuge, Digital Reactor Block etc.
Oct'05-Apr'07: Assistant Chemical Engineer, Polaris Healthcare Pvt. Ltd., Hyderabad, India.
* Assessed the processes for their relevance and assessed the adequacy of engineering equipment.
* Performed engineering calculations by applying the principles of heat transfer, mass and momentum to process and equipment design.
* Assisted with the design and installation of new production units. Monitored modifications and upgrades while troubleshooting the existing processes.
* Performed risk assessment including hazard and operability (HAZOP) studies for the health and safety of both the company staff and the community.
* Made observations and recorded measurements directly to ensure the process works at the optimum level, to the right rate and quality of output in order to meet supply needs.
* Assumed responsibility for continuous monitoring and ongoing performance of the processes.
* Managed the time and cost constraints of the projects.

ACADEMIC PROJECTS
* Worked independently on steady state simulation of the manufacture of Vinyl Benzene using Aspen Plus
* Developed PFD and performed steady state and dynamic simulation of gas refining process using Hysys.
* Performed and reported process optimization of a minimum time problem in kinematics using MS Excel.
* Worked on all the design calculations and report documentation in a team project on design and set up of a drinking water treatment plant.

PROFESSIONAL AFFILIATIONS/ACCOMPLISHMENTS&HONORS
* Student member, American Institute of Chemical Engineers since 2008.
* Student member, Society of Women Engineers since 2008.
* Recipient of Graduate Scholarship, Department of Chemical Engineering, Lamar University (2007-2008).
* Short-listed from hundreds of applicants to participate in Corporate Leadership Conference'2008 sponsored by Lyondell Basell in Houston, TX.
* Provided tutoring to high-school and undergraduate students having difficulties with academics.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4101 to 4150 of 10903)

Go to Search Parameters...

Brief Description

Senior Assistant + Engineering Technician with 3 yrs. work experience in Dubai and Building Maintenance Engineer with 5 yrs. work experience in hometown. Autocad 2009 & Revit Architecture software I used at work.

ƒæ Mecahanical Pump,Gearbox,roll,and all,ƒæ Mechanical Install Machine Project ,ƒæ Drafter (2D, 3D, Isometri),ƒæ Preventive, Proactive, Predictive And Corective Maintenance,ƒæ Mechanical Maintenance and Welder,LATHE/Milling Machine,Theodolit Elevasion,Microsoft Office

PIping, PDS, CAD

B.E. Mechanical Engineer with 4 years of Experience in Commissioning and Maintenance of Industrial Equipments in Refinery and Oil & Gas Field.

LOGISTICS, SHIPPING, BILLING, SAFETY OFFICER

I have had experiences for 4 years in wireline operation, drilling and production area. Having good knowledge of Bottom Hole Equipment, mPLT, gauges and other conventional wireline jobs.

Problem solving skills in core Mechanical Engineering and in the area of Structural Mechanics; Ability to handle multiple tasks with good time management skills; Self-motivated, highly responsible & organized, strong written and verbal communication skills, Knowledge of Design Engineering Stres

Oil and Gas Lawyer (Masters Degree)

As the Cost Engineer in one of the leading owner and operator of FPSOs, my main task is to provide effective cost control measures for the ongoing conversion projects. Good interpersonal skill is an important aspect as my role requires liaison with various parties of the hierarchy from

3.5 years of experience in Structural drafting, Structural Analysis and Detailed Structural Design Engineering. Experienced in RISA, Strand7, AutoCAD, MathCAD and X-steel.

Diploma in mechanical engg

Honours degree in Geology/Petroleum Geology, 4 years offshore experience, 3 years as LWD/MWD engineer, valid offshore safety and medical certificates

Welding Inspection and also able to perform Welding Engineer job.

I am currently looking for work in the Texas Panhandle region. I have 7 years of experience in the Oil/Gas Pipeline control systems.

Field Experience Upstream Production Testing / Logging. Petroleum Eng Background

Experinced seaman of over 12yrs on boats

RELEVANT ACQUIRED SKILLS Working Knowledge of ECLIPSE Reservoir Simulator and OilField Manager (OFM), Programming in FORTRAN and C++, Proficiency in Microsoft Word, Excel and Power Point Applications and AutoCAD

I have 4 years exp in Oil & Gas Industries as an Electrical Maintenance Engineer. i did B.Tech (Electrical) at Rajasthan University. Now i am working in ESSAR OIL Ltd as a Maintenance Engg.

Coal Bed Methane Drill Site Supervisor

To operate shutting down / starting-up the processing plant assigned to an Offshore / Onshore platform for collection, treatment & inward transmission to consumers of oil & gas. To mix chemicals, prepare the plant for routine / planned maintenance and carry out first line maintenance.

My expertise includes strong hands-on technical skills with ECLIPSE and MBAL software applications. I am highly skilled in EOS fluid characterization, well test analysis, reservoir modelling, manage mature reservoirs, well monitoring

Excellent experience in the oilfield, having worked as Rig Manager for 3 1/2 years , working on Top Drive Telescopic Doubles, scissor sub and Super-single rigs.Good communicator, speak fullest Spanish excellent people skills and works well with others

I am graduated faculty of engineering, stillworking in my Master Thesis, Last position AD on MAERSK ENDURER HPHT Jack-up

I am a mechanical engineer with over 25 years of experience in designing, engineering and field servicing of various types of mechanical equipment.

I am a Static Equipment Design Engineer with %+ years experience. I have work experience in Both static and Rotating equipments. Ihave strong exposure to design softwares such as Compress, B-JAC, etc.,

A Mechanical Engineer with 4.7 years of experience in a piping &Pressure Vessel Currently working as QA\QC ENGINEER in M/s KALPATARU POWER TRANSMISSION LTD, GUJARAT

Post graduate in chemical engineering with impressive skills and work experiences seeking a full time position as a chemical/process engineer.

sound knowledge of engineering hydrodynamics, fluid dynamics, working experience with subsea pipelines (marine riser), having received master degree in offshore engineering, seeking an opportunity in the filed of subsea engineering.

Masters in Electrical Engineering with 2 yrs of experience in Electrical Controls & Instrumentation

Oil & Gas Land services

Procuction,project,commissioning experience in chlor alkali industry

journeyman electrician

Landman

Chemical Engineer, Piping, SmartPlant 3D (SP3D), 5+ years of exp.

Fluent in English and Filipino. Knowledgeable in computer and customer service related works. Possessed with proper knowledge, good quality of administrative and banking skills and right attitude. Interests include surfing the net and socializing with people. Goal-oriented, adaptable, determined and

Procurement Engineer with 4.5 years of experience in Procurement of Static Equipments, Packages and Piping Specality itemd for EPC Project. Act as focal point for all Third Party Inspection for all Packages, Piping bulks etc required for EPC Contracts. Also acting as Logistics Controller

DCS Control Room Operation In Hydrogen. LPG MEROX At World Largest Petroleum Refinery In Reliance Industries LTD

Fluent in French, Arabic and meduim in english

I have 8 years experience in process piping design in hydrocarbon service, including layout and production piping.

I am proficient in installation, troubleshooting and repair of electrical eqiupment.I can read prints and wiring diagrams. I am skilled in the use of electrical test equipment and electrical tools of the trade. I have WY, and MT master electrical license.

Ten (10) years of accumulated experience in construction engineering, project planning using Primavera P3 ver. 3.1 for more than six (6) years, and project management. Last seven (9) years with Saudi Arabian Oil Company (Saudi Aramco), Saudi Electricity Co. - Eastern Region Branch (SEC-ERB) and Saud

Sixteen years experience in inspection such as Piping and Structure Inspector, Pipeline Inspector, Civil & Track Work Inspector, NDT Technician Operator, Machinery Fitter for petrochemical projects, power plant, oil and gas projects, LRT-PUTRA project

Internationally experienced and trained professional in Instrumentation and Control Systems. Experienced in the design, control philosophy, MMI/HMI generation, implementation, start-up, commissioning, and operation of DCS, SCADA, and PLC.

chemical engineer

Occupational Health And Safety Professional, Post Graduate Cert. In OHS&E Management

Technically accomplished & competent professional with over 9+ years’ rich experience on Refinery Inspection department Activities, starting from Refinery construction stage to pre-commissioning and Normal operation. Currently working as Assistant Manager (Inspection) with NRL

Tender Preparation & Evaluation, Raising RFP’s, Preparing prequalification document including involvement in preparation of execution strategy, Defining scope of work, preparation of Commercial clarification, Raising commercial deviations etc. Project Monitoring: Continuous monitoring of Projects

Having total 11 years experience out of which 10 years in Oil & Gas and Shipbuilding Industry as an Cost Estimator, Cost Control Engineer, Tender Coordinator and HSEQA Adviser in the leading FPSO/FSO Company, Shipbuilding/ship repair and conversion yard.

I am a Slickline Operator with over 20 years of experience in Wireline/Slickline Operations. I am an holder of a diploma in Mechanical Engineering.

20+ years in drilling and completions including under balanced side trac re-entry and frac-pack sand control operations. Have worked off-shore Greece, desert locations Libya, Algeria, Saudi, and Russia

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 [ 83 ] 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out