Resume - Engineering & Engineering Project Management

Misco Jobs

Resume #78695

CONTACT INFORMATION:
View contact information...

EDUCATION & CERTIFICATION:
------------
1993 - 1997 University of Parahyangan, Indonesia
Bachelor Degree
Major: Civil Engineering

EMPLOYMENT BACKGROUND
------------
Duration: August 2004 - now
Company: PT International Nickel Indonesia (subsidiary of Vale INCO)
Company category: Nickel Mining
Title: Process Plant Senior Civil/Structural Engineer
Responsible: As Project Engineer or Civil Design Engineer responsible to design, review drawing and raise Engineering Work Package (EWP), review tender document from contractor, material preparation and supervise construction for all Maintenance and Operation project related to Civil & Structural Steel Work at Furnace and Kiln Area.
Assist Project Manager to control the project construction in order to ascertain that the project will be executed as per drawing, procedure, cost, schedule and comply with safety objective.

Duration: December 1997 – August 2004
Company: PT Rekayasa Industri
Company category: EPC – Engineering Procurement and Construction
Title: Civil/Structural Engineer
Responsible: Design Analysis for steel structure, concrete structure and equipment foundation. Preparing structural design calculation report and engineering drawing.

WORK EXPERIENCE
------------
Duration: January 2008 - Present
Company: PT International Nickel Indonesia (subsidiary of Vale INCO)
Title: Project Engineer and Civil Design Engineer
Project & Job Description:
* Kiln Refractory Partial Reline
Prepare construction method both casting or gunning reline.
Release Engineering Work Package, review tender document from contractor, expedite material preparation and supervise construction during Quarter 2 and Quarter 3 2008 Major Shutdown.
* Kiln ESP Upgrade
Review drawing of new ESP Support (Structure and Foundation)
* Sulphur Line Upgrade
Design new pipe rack for new sulphur pipe line.
Prepare engineering drawing and release Engineering Work Package.
* Kiln Feed Bin Building
Design feed bin building extension to accommodate reversing conveyor to reach ore bin.
Prepare engineering drawing and release Engineering Work Package
* Drainage at Kiln area
Design drainage system at Kiln area
Prepare engineering drawing, release Engineering Work Package, review tender document from contractor.
* Transfer Car Rail Repair.
Prepare construction method to repair concrete pit and replace rail.
Release Engineering Work Package, review tender document from contractor, expedite material preparation and supervise construction during Quarter 2 2008 Major Shutdown
* Platform for maintenance purpose
Design platform to accommodate maintenance crew to maintain equipment such as calcine crane, bin, lighting, slipring, stack, etc.
Prepare engineering drawing and release Engineering Work Package.
* Technical Support to Maintenance and Operation related to Civil/Structural Work.

====================

Duration: June 2006 – December 2007
Company: PT International Nickel Indonesia (subsidiary of INCO Ltd Canada)
Title: Project Engineer and Civil Design Engineer
Project & Job Description:
* Kiln ESP Ducting Support
Design support for new Inlet and Outlet Ducting of Kiln ESP.
Prepare engineering drawing, release Engineering Work Package (EWP), review tender document from contractor, expedite material, expedite fabrication and supervise construction.
* Switch Room at Calcine Crane Girder.
Design switch room at Calcine Crane Girder to protect electrical panel from dust.
Prepare engineering drawing, release Engineering Work Package, review tender document from contractor, expedite material, expedite fabrication and supervise construction during Quarter 1 2007 Major Shutdown
* Crane Operator Cabin Replacement.
Design new Cabin complete with AC and pressurized unit.
Prepare engineering drawing, release Engineering Work Package, review tender document from contractor, expedite material, expedite fabrication and supervise construction during Quarter 1 2007 Major Shutdown.
* Transfer Car Rail Repair.
Prepare construction method to repair concrete pit and replace rail.
Release Engineering Work Package, review tender document from contractor, expedite material preparation and supervise construction during Quarter 1 2007 Major Shutdown
* Structural repair and strengthening.
Design structural repair that corroded such as walkway, pipe support, building, etc.
Design additional support for structure due to additional load; i.e. additional load from piping at pipe rack or pipe bridge..
Prepare engineering drawing and release Engineering Work Package.
* Technical Support to Maintenance and Operation related to Civil/Structural Work.

====================

Duration: August 2004 – June 2006
Company: PT International Nickel Indonesia (subsidiary of INCO Ltd Canada)
Title: Project Engineer and Civil Design Engineer
Project & Job Description:
* Furnace Roof Brick Replacement
Design new furnace roof brick and easier installation.
Prepare engineering drawing, release Engineering Work Package (EWP), review tender document from contractor, expedite material, expedite fabrication and construction supervision during Quarter 1 2006 Major Shutdown.
* Furnace Transformer Replacement
Design temporary platform that used during replacement and modify transformer room.
Prepare engineering drawing, release Engineering Work Package (EWP), expedite material, expedite fabrication and construction supervision during 2005 and 2006 Major Shutdown.
* Structural repair and strengthening.
Design structural repair that corroded or broken such as platform, pipe support, furnace building, slab, furnace shell, etc.
Prepare engineering drawing and release Engineering Work Package.
* Technical Support to Maintenance and Operation related to Civil/Structural Work.

====================

Duration: April 2004 - August 2004
Company: PT REKAYASA ENGINEERING ( subsidiary of PT Rekayasa Industri )
Title: Civil Engineer
Project: Proposal preparation
Job Description:
* Preliminary design for proposal purpose

====================

Duration: December 2003 - March 2004
Company: PT REKAYASA ENGINEERING ( subsidiary of PT Rekayasa Industri )
Title: Civil Engineer
Project: Kujang 1B Project (Consortium PT Rekayasa Industri, IKPT & TEC)
Client: PT Pupuk Kujang (Persero)
Job Description:
* Design Analysis for Ammonia Pipe Rack 3, preparing structural design calculation report and engineering drawing.
====================

Duration: February 2003 - November 2003
Company: PT REKAYASA ENGINEERING ( subsidiary of PT Rekayasa Industri )
Title: Civil Engineer
Project: NPK Fertilizer Project
Client: Malaysian NPK Fertilizer SDN BHD
Job Description:
* Design Analysis for Bulk Material Store, preparing structural design calculation report and engineering drawing.
* Design Analysis for Duct Support, preparing structural design calculation report and engineering drawing.

====================

Duration: December 2002 - Februari 2003
Company: PT REKAYASA ENGINEERING ( subsidiary of PT Rekayasa Industri )
Title: Civil Engineer
Project: CO2 Removal Project
Client: Pertamina DOH Jawa Bagian Barat
Job Description:
* Design Analysis for Pipe Rack, preparing structural design calculation report and engineering drawing.
* Design Analysis for Lightning Tower, preparing structural design calculation report and engineering drawing.
* Design Analysis for shelter such as Nitrogen Shelter and Water Treatment Shelter, preparing structural design calculation report and engineering drawing.
* Design Analysis for Flare Stack, preparing structural design calculation report and engineering drawing.
* Design Analysis for Pipe Stanchion, preparing structural design calculation report and engineering drawing.
* Design Analysis for several equipment foundation such as Boiler Package, Water Treatment Package, IA/PA Package, Gas Dryer Package, Portable Tank, responsible to prepare structural design calculation report and engineering drawing.
====================

Duration: December 2002 - Februari 2003
Company: PT REKAYASA ENGINEERING ( subsidiary of PT Rekayasa Industri )
Title: Civil Engineer
Project: Gas Booster Station Project
Client: PT Perusahaan Gas Negara (Persero)
Job Description:
* Design Analysis for Flare Stack, preparing structural design calculation report and engineering drawing.
* Design Analysis for Pond, preparing structural design calculation report and engineering drawing.
* Design Analysis for several equipment foundation such as After Cooler, Close Drain Drum and Horizontal Vessel, responsible to prepare structural design calculation report and engineering drawing.
====================

Duration: November 2002 - December 2002
Company: PT REKAYASA ENGINEERING ( subsidiary of PT Rekayasa Industri )
Title: Civil Engineer
Project: PMS Rimba Belian
Client: PT Perkebunan Nusantara XIII
Job Description:
* Design Analysis for Pressing Station Foundation, preparing structural design calculation report and engineering drawing.

====================

Duration: Februari 2002 - November 2002
Company: PT REKAYASA ENGINEERING ( subsidiary of PT Rekayasa Industri )
Title: Civil Engineer
Project: NH3 Tank
Client: PT Petrokimia Gresik
Job Description:
* Design Analysis for several equipment foundation such as pump, compressor, refrigerant, separator, vaporizer responsible to prepare structural design calculation report and engineering drawing.
* Design Analysis stanchion for pipe support, responsible to prepare structural design calculation report and engineering drawing.
* Design Analysis for Lightning Tower, preparing structural design calculation report and engineering drawing.

====================

Duration: Februari 2000 - Februari 2002
Company: PT REKAYASA INDUSTRI
Title: Civil Engineer
Project: Kaltim 4 Project(Consortium PT Rekayasa Industri and Mitsubishi Heavy Industry)
Client: PT Pupuk Kalimantan Timur (Persero)
Job Description:
* Design Analysis for Central Control Building, responsible to prepare structural design calculation report and engineering drawing.
* Design Analysis for Foundry Shop, responsible to prepare structural design calculation report and engineering drawing.
* Design Analysis for some equipment foundation such as Demineralization Package, Gas Turbine Generator (GTG), Waste Heat Boiler Package (WHB), Pump, Air Compressor, Plate Exchanger, Tank, Natural Gas Knock Down, Air Receiver, Nitrogen Generator, responsible to prepare structural design calculation report and engineering drawing.
* Assistance Engineer for Sea Water Intake Design, responsible to prepare structural design calculation report and engineering drawing.
* Assistance Engineer for Chlorination Foundation Recovery due to settlement, responsible to prepare structural design calculation report and engineering drawing, join with PT Soilens (Soil Investigator) and Bandung Institute of Technology (ITB).
* As Assistance Engineer to check/revise Pipe Rack engineering drawing due to additional load from Piping.

====================

Duration: November 1999 - Februari 2000
Company: PT REKAYASA INDUSTRI
Title: Civil Engineer
Project: NPK Gresik
Client: PT Petrokimia Gresik
Job Description:
* Design Analysis for several equipment foundation such as pump, compressor, utility package, preparing structural design calculation report and engineering drawing.

====================
Duration: December 1997 - November 1998
Company: PT REKAYASA INDUSTRI
Title: Civil Engineer
Project: Semen Kupang II Project
Client: PT Semen Kupang
Job Description:
* Design Analysis for several Equipment Foundation such as Cement Mill, Raw Mill and Coal Mill, responsible to prepare structural design calculation report and engineering drawing.
* Design Analysis for Mix Storage Building, responsible to prepare structural design calculation report and engineering drawing.
* Design Analysis for conveyor around Mix Storage Building

COURSE & TRAINING
-----------------
- English Course, conducted by International Language Programs (ILP)
- Design Analysis with British Standard Tutorial, conducted by Juru Tera Profesional Malaysia
- STRUCAD, conducted by PT Rekayasa Industri
- Layered Safety Audit conducted by PT INCO
- Managing Control of Loss conducted by PT INCO
- Reliability Centered Maintenance (RCM) conducted by PT Relogica Indonesia
- Hydropower Technology Course conducted by Genesis Energy Ltd
- Pembinaan K3 dan Lingkungan Pertambangan untuk Pengawas Operasional Madya, conducted by Direktorat Teknik Mineral dan Batubara.
- Basic Safety: Confined Space, conducted by PT Alkon Trainindo Utama
- Corrosion Control Management, conducted by PT Handal Wira Mandiri
- Basic Safety: Working at Height, conducted by PT Alkon Trainindo Utama
- Safe Excavation Procedures and Method, conducted by PT INCO
- Project Management Basic, conducted by PT INCO
- Microsoft Project, conducted by PT Andalan Nusantara Teknologi
- Risk Management, conducted by PT Alkon Trainindo Utama
- Material Bulk Handing, conducted by Martin Engineering
- Financial Awareness, conducted by PT INCO
- Basic Safety: Isolation & Lockout, conducted by PT Alkon Trainindo Utama

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5951 to 6000 of 10902)

Go to Search Parameters...

Brief Description

Skills Experience in Oil & Gas Industries & offshore oilfield.

An engineer from evergreen branch (Mechanical Engineering) ready to put the optimum use of my knowledge in any desire discipline.

Prefer well completion, wireline, drilling engineer

Autocad, Pro-e

Seeking a challenging career in leading Petroleum Company as a petroleum engineer, that ýmatches my field of interest in Petroleum Engineering, where my abilities and skills ýcan be developed and knowledge can be applied.

An engineering post-graduate with specialization in environmental engineering. Overall work experience of more than 14 years with majority in Petrochemical.Career Objective-To excel in the field of Industrial Environmental Management by virtue of knowledge, team work and self motivation.

3 years diploma in electrical engineering. Skills: involved in commissioning & maintenance of electrical equipment in upstream oil & gas /petrochemical industries.

Proficient in Excel and in Word. Proficient in Primavera Project Planning software.

Adaptable, Enthusiastic, seeks work in Aberdeen or UK.

A graduate of University of Port Harcourt, Faculty of Science, Department Of Geology (Bs.c Geology) Rivers State, Nigeria. Working currently as a contract staff with Shell Petroleum Development Company Nigeria Ltd.

B.Eng. Electrical Electronics. CCNA-Abuja,Nigeria. IEEE-USA Member, Networking Telephony/Data, MicroSoftExcel etc, Travelling & Visiting New places

Landman

Knowledge of Ms-Dos ,use of SQL ,use of linux operating system ,use of Oracle on window Analytical skill and problem solving with creativity,

Engineering skills, AutoCad, MS Word

Petroleum and gas engineer.

Recent University of Texas Graduate. Economics/Business Degree.

Mechanical, Estimate/proposal engineer

Highly motivated, creative and versatile chemical engineer with an experience designing refinery plant for a gasoline production from crude oil refineries. Especially skill in optimizing heat recovery by using pinch analysis. Excellent management, negotiation and public relation skills.

Over 10 years of experience I have developed a good level of IT skills: I regularly use P3 (Primavera Project Planner), P5, P6 as well as Microsoft Office software.

Senior Pipe Stress Engineer

BS Electrical Engineering, 10 yrs experience instrumentation oil and gas industry, hardworking, computer literate: MS Word/Excel/Projects.

Electrical High Voltage Protection Technician

Specialist of Control System in Designation of Aromatic IV Plant in Borozouieh Petrochemical Complex in Assaluyeh and in consortium with LG E&C and Toyo, Preparation of DCS/ESD Loop/Logic diagram, Instrument Location Layouts.

I have over 13 years experience related to SCR drive Disel Electric Drilling Rigs, both in Service, Manufacturing, and Preventive Maintenance.

Nineteen years experience in mechanical and electrical work offshore Gulf of Mexico

B.com, C A (inter), D C A Having proficiency in the field of accounting and auditing for a period of more than 10 years .

I am currently in my 4th year (finish Sept 2003)of a Masters degree (Meng) in Mechanical & Offshore Engineering at The Robert Gordon University, Aberdeen. Since May 2002, I have worked as a Student Engineer for a large service company within the petroleum industry, Weatherford

Project Information Manager/ Intergraph PDS Administrator & Support

Ø Seeking a challenging position to utilize my education and experience in the field of Pipeline engineering profession. Ø To work in challenging environment and contribute the growth of the organization, to work professionally, honestly and for the prosperity of organization.

Have a lot of experience if field operation specifically with coiled tubing.

Vibration Analyst / Machinery Engineer. 9 Years Experience. Working on Bently Nevada ADRE and CSI RBMWare. Fluent in English.

I also have 7 years of experience in analysis packages like STAADIII & In these seven years of service, I have directly worked in multiple functions proposal Engineering & Detailed Engineering. CAESAR,CFD.I am conversant with packages PRO-E, IDEAS, CFX.

Planning and Cost control Engineer with 10 year experience in Oil, Gas and Petrochemical Industry.

I would like to apply for Network Administrator or Network Engineer post in middle east countries

A keen team player with more than 15 years experience in Project Document Management, solid background in IT support, accounts, project administration, Project co-ordinator, quality control co-ordination and project analysis. Expert in Documentum.

Production Operations Chief in an international oil company with strong experience in artificial lift equipment design and diagnostic, workover rig supervision, production follow-up, costs and investment control, as well as field crews supervision.

Control and instrumentation engineer with good experience in project management ,construction, commissioning in power plants and chemical industries.

I am a Chemical Engineer from Texas A&M University-Kingsville. I have my Masters degree in Chemical Engineering .I have earlier worked with BetzDearborn Ltd. in water treatment field for a 27000 MT refinery. At present I am looking for a job in the Chemical/Petroleum sector.

I would like to express my interest in joining your company if there a vacancy for me as an experienced mechanical engineer graduated from K.F.U.P.M in 1993.

Looking for a mechanical working environment, with open atmosphere, welcome new idea.

Objective: Process Engineer where I can contribute technically to a growing, global and environmentally conscious energy firm. Currently a student of M.S. Chemical Engineering at Oregon State University Expected graduation date-June 2003.Worked as a process engineer in a refinery for three years

Over six years(8) years experience in ammonia plant and field of Oil & Gas Production Operation, PetroChina International Jabung Ltd. Responsible for the day to day planning and safe execution of routine planned to ensure safe and efficient, Bring On Line and Shut In Production, start-up and shutdow

I am an Electrical (Electronics & Communication) Engineer determined to get thru in expediting the Projects on the basis of self learning and self motivation I have the hands on experience while working as a Sr .Application/Project Engineer in Innovative Automation and Engineering Private Limited),

I am qualified Mechanical Engineering having 6 years of Experience in the field of Mechanical Design of Static Eqpt such as Pressure Vessels, Heat Exchanger, Column, Reactors, Indirect Hype Heater, Storage Tank etc. Well versed with International codes like ASME SEC. VIII Div.1 & 2, UHX, TEMA, PD550

40 years practical and managerial experience in the gas,oil petrochemical and water sectors.

Engineering & Engineering Project Management

Instrument Technician/Electrician OR Instrument /Electrical/Electronics Engineer

International Land Surveyor with over 30 years of experience including: GPS, CAD, exploration, mapping, military support, oil infrastructure, and various civil related projects.

Solid academic formation in petroleum engineering. Native Spanish speaker, proficient in English. Computer literate in Autograph (Esp design), FoxPro (inventories), and MS Office. Available immediately, willing to travel and / or relocate.

Instrumentation and Control Engineer

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 [ 120 ] 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out