Resume - Drilling Engineer – DCWO planning, programming, engineering, operations evaluati...

Misco Jobs

Resume #78740

CONTACT INFORMATION:
View contact information...

CAREER SUMMARY

A Professional Engineer with 21 years of Domestic and International oil and gas experience focusing on operations/engineering and field development. Most recent successes include the engineering of significant reductions in drilling/well servicing costs and increasing production in previously unprofitable wells.

CAREER HISTORY

* DRILLING PERFORMANCE AND ENGINEERING MANAGER
TNK-BP Management, Moscow, RU
BU Samotlor - Nizhnevartovsk, West Siberia
2008 - present

Samotlor field holds more than 7 billion barrels of oil in place and around 100 billion cubic meters of gas, and ranks among the five largest fields in the world.
Responsible for drilling and sidetracking operations evaluation and recommendations in equipment and procedures changes to lower costs and achieve objectives (5% in drilling and 10% in sidetracking efficiency increase). Working on Performance Improvement Plans - Technical Limits, Stuck Prevention and Mud Losses Minimization, Bit Optimization, Quality Improvement in Liner Cementing (liner hangers, liner centralization, swell packers), Hybrid Coiled Tubing Drilling Pilot Project for sidetracking, ML Pilot Project. Reduce train-wrecks (NPT) due to drill string components material fatigue – developed Drill string components instructions for BU Samotlor.

* SENIOR DRILLING ENGINEER
TNK-BP Management, Moscow, RU
Rospan International, BU East, Novyi Urengoy,West Siberia
2007

Rospan International was set up with the purpose of developing the deep-seated high-pressure gas layers of the Novo- Urengoisk and East-Urengoisk gas condensate fields (HP-HT S-shaped wells: ~4300m MD, ~1700m displacement, ~60 MPa formation pressure).
Responsible for DCWO Operations Technical Support, development of required Well Programs and coordination of Drilling and Completions Engineering Staff and Contract Design Specialists. Perform Drilling Engineering Reviews. Analyse operational data to identify performance enhancing opportunities, formulate "train wrecks" analysis, identify and disseminate best practices, lessons learned, implement TL process. Achieve Drilling Performance improvement and NPT decrease. Implement rotary/slide drilling with PDM and MWD (Sperry Sun) – reduce BHA trip times and trips due to Russian Telemetry failures. Modify drilling fluid to prevent mud losses and pipe sticking (polymer-carbonate mud). Perform Stuck Pipe training for drilling crews.
Responsible for Frac designs preparation in cooperation with TNK-BP, Schlumberger and CatKoneft specialists. Supervising Frac jobs (proppant volumes 150-250t, slurry volumes 450-700m3, pumping pressures to 700atm). Achieve ~ 50-150% increase in gas/condensate production. Multistage Frac Job preparation.

TNK-BP Management, Moscow, RU, Kamennoye Project, BU Nyagan, West Siberia
2006

Responsible for engineering support for the design, development and implementation of Drilling programs to meet the objectives of Kamennoy 1 Project Statement of Requirements (SOR). Direction of Drilling Engineering Staff (BU Nyagan), Russian Institutes (SIBNIINP Tyumen) and Contract Design Specialists (NvBN Nizhnevartovsk) in the well programs development and technical solutions within the above objectives.
Responsible for development of TOR and overseeing the RDI Design Development for Horizontal Wells. Preparing the drilling programs and providing the technical support in the execution of the Kammenoy 1 Horizontal Well Program – planning the wells, AFE's, coordination of tendering activities for tangible related goods and support services, contracting, logistic, contingency plans, bit selection and hydraulic calculations, drilling fluids selection (FLO-PRO system for horizontal section), daily operation checks and making decisions with SLB directional service (trajectory calculations - MAURER, BHA performance evaluations) and SLB geosteering service. TVD ~1470m, MD ~2700m, horizontal section ~600m, target reservoir thickness 1.2-2m. Improved performance from 14.4 days/1000m on the first Hz well to 10 days/1000m on the last one.
Development of Drilling Performance Baseline, Metrics, Reporting and Analysis Standards for Operations Personnel. Implementation of best practices/lessons learned into operations to improve safety, increase efficiency and reduce cost.
BU Nyagan achieves the best 2006 Drilling Performance Improvement within TNK-BP. Improvement for Spud to Rig Rel/1000m is +8.9% (overall TNK-BP average is +1.99%).

* DRILLING and WORKOVER ENGINEER BP, London, UK
2005 (September – December)

BP START Core Team Member for Kamennoye Project Development in the Khanty Mansisk Autonomous Region, Western Siberia (BU TNK-BP Nyagan). Developing Analyses, Presentations for BP START. Developing the Drilling SOR for Kam 1 Project. Defining recommended upgrades to existing drilling and completion systems and setting the DCWO performance goals.

* DRILLING ENGINEER
Helmerich & Payne (Boulder) Drilling Co.
Tulsa, Oklahoma, USA
TNK-BP Project – Rospan International, Novyi Urengoy, RUSSIA
2004 – 2005 (August)

As a member of H&P Assistance Team focusing on rig upgrade, implementation of recommendations and improvements in equipment and process, development drilling plans (S-type directional wells – 4,400m – with above 60MPa formation pressure), optimization of bit performance, recommendations for decreasing drilling time and cost by implementation of new technologies, establishment of checklists and inspection program. Performing Technical Limit Drilling Analysis and determining critical equipment required in a Western/Russian hybrid rig. Increasing drilling efficiency (increasing bottom drilling time in some sections from 20 to 50 %) and reducing drilling time by 15% in average.
Assisting in tendering and contracting during the shifting from turnkey drilling to day rate contracts.

* WORKOVER TRAINING (LECTURER)
Uzenmunaygas/Kazmunaygas/World Bank
Uzen - Kazakhstan
2004

Lessons giving / training of the UMG Workover and Production Engineers (the UMG Training Centre) in February - April 2004 (Well Production, Drilling the Reservoir, Completions, Stimulation – Acidisation – Hydraulic Fracturing, Workovers, Coiled Tubing, Underbalanced Drilling, Laterals). World Bank Contract

* WORKOVER ENGINEER
Gaffney, Cline Associates (London, UK)
Uzen - Kazakhstan
2002 - 2003

The main objective of this World Bank Project was to reduce the rate of decline in oil production on the Uzen' Oil Field, to implement new western technologies, to rehabilitate Block 3A (about 700 wells) and to help Uzen'Munaygas and KazakhOil attract investments to complete the full field rehabilitation (about 7000 wells).
Responsible for all aspects of workover operations on the Block 3A and on-the-job training of UMG staff assigned to this part of the project. Preparing comprehensive workover programs for the selected wells, developing the techniques and practices used for the workovers, working with the Rig Management Contractor to maximize workover rig uptime and efficiency. Introducing new unfamiliar technologies and modern well workover practices – new fishing tools and techniques, application of logging tools, underbalance perforating - TCP, kill pills, new workover fluids, use of packers and bridge plugs, blowout prevention, API standards, SRP design and modeling using software "RodStar" from THETA, pump optimisation, using SR protectors for deviated wells, stimulation treatments to improve the productivity of the wells, matrix acidizing, hydraulic fracturing, Hot Oil treatment with wax inhibitor, near wellbore solvent treatment with packer, treatment of WO fluids against scale, surge testing, etc.
Responsible for tender specifications, bid technical evaluations and award recommendations for procurement of drilling/workover rigs, rig tool, rig equipment and drilling tool.

* DRILLING, COMPLETION & WORKOVER COORDINATOR
Chaparral Resources Inc. (Houston, USA)
Aktau Kazakhstan
2000 - 2001

Responsible for location construction, DCWO programming; AFE's, forecasts and budget preparation in the development of the Karakaduk oilfield. Procurement/logistics coordination of domestic and international sources of DCWO materials. Responsible for the relevant planning schedules with respect to the provision of Drilling Well Tangible equipment (wellheads, OCTG and associated equipment). Coordination of tendering activities for tangible related goods and support services. Maintenance of DCWO database and daily analysis of rig time optimisation. Integration and supervision of local technologies/services to insure drilling, cementing, logging, under balanced perforating, kill procedures and geophysical surveys are performed to western standard. Our team's effort has resulted in a reduction of drilling times from 27 to 13days (to 3200m) saving $280,000 per well and an increase in production from 1200 to 10,000 bopd.

* DRILLING ENGINEER / PROJECT ENGINEER
Momentum International (Alberta Canada)
West Ukraine
1998 – 1999

The Kolomya shallow gas well project consists of 3 license areas in the Western Ukraine. Responsible for the management of drilling, completion and workover operations and procurement of western and domestic oilfield supplies. Training of Ukrainian personnel in Western equipment and methods.

* PROJECT MANAGER
Nafta – Vychod (Slovakia)
West Ukraine
1997 – 1998

Supervise drilling, completion and logging services for Momentum International in the Sloboda – Rungurske oilfield. Responsible for DCWO programming for the field which included authoring programmes, AFE's, well site preparation, supervision of key operation and budget reconciliation, material acquisitioning, -inventory, -logistics and financial analysis of all field operations as well as invoices approval. Reviewing and verifying of all agreements with contractors, subcontractors, service companies, suppliers. Responsible that all operations were conducted in accordance with HSE guidelines and regulations and for the communication with Ukrainian authorities and Government bodies in this regard.

* SENIOR ENGINEERING SUPERVISOR
Nafta – Gbely (Slovakia)
Slovak Republic
1990 – 1996

Responsible for all aspects of subsurface operations/engineering. Engineer and implement the first western directional drilling program used in Slovakian oil and gas fields. Reduce drilling/completion costs and increase production by upgrading local rigs to western standard, drilling fluid optimisation, utilization of "Geoservice" directional/logging technologies, the under balanced perforating in clean/non damaging fluid and hydraulic fracture of low permeability wells.

* RIG MANAGER
Moravske Naftove Doly
Czechoslovakia
1987 – 1990

Rig Supervision of deep (4000 – 6000m) gas wells. Introduced sump-less drilling in an environmentally sensitive area by retrofitting western solids equipment to a Romanian Type F drilling rig. Reduced drilling costs with introduction of western bits and mud pumps.

EDUCATION

Petroleum Engineer
Degree in Mining Geology and Geological Exploration with the specialization in oil and gas drilling technology. Graduated with distinction.
Technical University in Kosice, Slovak Republic 1982 – 1986

LANGUAGES

Oral and written fluency in English, Russian, Slovak/Czech (partly German).

PERSONAL BIO

Date & Place of Birth 10 November 1962, Presov, Slovakia
Citizenship Slovak

CHARACTERISTICS
Good interpersonal and communication skills. Planning and Coordination skills. Perseverance. Respected reputation within the Russian Oil Industry. Experience in harsh and arctic working environment.

PROFESSIONAL TRAINING AND DEVELOPMENT

* Drilling Supervisor IWCF Certification - Petroleum Industry Training Service in Leduc, AB, Canada
* Hydrogen Sulphide Rescue and 1st Aid Certification – Leduc Safety Service Ltd., Canada
* RosTechNadzor Safety Certification – Moscow, Russia
* GorTechNadzor Safety Certification – General Provisions and Safety Regulations in Oil and Gas Industry of the Republic of Kazakhstan. – Aktau, Kazakhstan
* Apprenticeship Workover Supervisor Training with Beta Well Service Inc. - Leduc, AB, Canada
* Well Control Certification for Drilling Engineers and Supervisors at Petroleum Training Service - Technical University in Kosice, Slovak Republic
* NEBOSH (National Examination Board of Occupational Health and Safety) Certification, UK
* Directional Drilling and MWD Training, Schlumberger, RU

/REFERENCES SUBMITTED UPON REQUEST/

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 401 to 450 of 10917)

Go to Search Parameters...

Brief Description

Free! PDS Piping Designer with Over 20 years experience within the Oil and Gas, Petrochemical, Refinery, Textile, Pharmaceutical and Nuclear Waste Industries

Twenty (20) years professional experience executing multi-million dollar projects in both domestic and international locations, acting as Owner representative in project controls and business management on major EPC, Lump Sum Turnkey and Joint Venture projects supporting Oil projects

A dynamic professional with over 2 decades (25 years) of rich experience in Project Machinery Planning & Execution, Erection & Commissioning, Maintenance, Quality Assurance, Process Enhancements and Man Management.

ArcGIS 8.x/9.x, ArcGIS Server, ArcObjects, Virtual Earth, C#, VB.NET, ASP.NET, VB6

Control & Instrumentation Engineer

Design Expert, Team Leader, Hardworking, Cost Control, Result oriented Instrumentation Engineer who can work on FEED/DD projects with equal proficiency.

Research & Development, Formulation, Manufacture, Maintenance, Project work

Over 16 years of wide and varied experience in the area of engineering consultancy for Design and Detail Engineering for Oil & Gas, Offshore / Onshore, Refinery, Petrochemicals, Alumna Plant, Pipelines, Gas Processing & LNG projects. I am fully conversant with all types of Process Control & Instrume

Skilled technician expert in Installation, Commissioning, Start-up and Maintenance over machines and equipments for Petrol, Pharma, Chemical and Oil&Gas sector.

WELL COMPLETIONS AND TESTING ENGINEER

engineering-mechanical-management- oil & gas

Professional Engineer in corrosion, NDT, and failure analysis with 14 years experince

Skill Structural Designer with 20+ year of experience

Senior Manager educated to Bachelors degree in Welding Engineering with over 20-yrs of experience in the Oil/Gas Industry

22 years experience in engineering,construction,fabrication,installation both onshore and offshore for refinery, Petrochemical, Oil & gas, LNG and power plant

Bachelor of Civil Engineering with Professional Designation

Long skills for work-over & completion well site supervisor , coiled tubing & snubbing too

Electrical / instrument designer

PDS and Smart Plant, Auto Plant(3D), Microstation, AutoCAD, MS Excel, Word etc.

Experienced Well site & Ops Geologist. Adaptable, strong inter-personal & communication skills, multi-disciplinary team worker. Follow up Operations Geology activity for Operated & Non-Operated assets, supporting Drilling & Completion. Can work independently with minimal supervision. B.Sc, Geology

Industrial Eng. with master degree in HSE. Title obtained: HSE eng. Specialist

Financial Accounting, Costing, Budgeting and Project Accounts

Positions - Project Manager, Project Control Manager, Planning Manager and Director in the area of process simulation, predictive control and risk. Hands on, onshore plants (oil, gas), aluminum, ammonium nitrate, offsite and utilities, offshore platforms and pipelines. Capex from $100M to $5Billion

A production/well completion engineer with over 20 years experience in Canada and overseas

Drilling Financial Controller responsible for all drilling expenditures

15 plus years of Rig and Merchant Naval experience with good administrative and communication skills as a Radio Officer/Purser/Fleet Administrative Officer on board foreign going vessels and rig. Have good experience in handling chopper program, boat program, material movements, crew changes, crew t

I have Very good Experience in the Petrophysical Operation, Studies and Well reservoir Survillance. Have experience in QC/QA of integrated studies. Have leadership experience

Geoscientist

Honor degree in Mechanical Engineering form UK and have gained more than twenty five years experience in the fields of major sub-sea assets management, assets integrity, offshore operations, projects and contracts management, inspection, maintenance and marine related projects.

Marine Pilot/ Mooring Master/ Loading Master

Sr. Technical Writer with Software, O&G expeience, PMP Cert

Materials Controller/Warehouse Supervisor/Logistics Supervisor

Multi skilled engineer, Technical Advisor, Mud Engineer

15 years Mechanical Engineer within Oil / Gas & refinery industry, inclusive 5 years maintenance experience; 5 years for nuclear power project; P.Eng of APEGGA, Canada

Can perform both technical work and sales work involving oil/gas industry more specifically as an advisor, planner, support or salesperson.

Drilling Engineer – DCWO planning, programming, engineering, operations evaluation, performance analysis; deep HPHT gas wells, high deviated, ERD and horizontal oil wells, sidetrack wells; land operations; harsh desert (Middle Asia) and arctic (Siberia) environment; English-Russian-Slovak

Over thirty years of experience in major US and International design/build facilities programs where responsibilities have included senior-level Project Management, Construction Management, Engineering and Design Management, equipment selection, installation and start-up. P&L responsibility for all

Senior Mechanical Engineer experienced in detailed mechanical / thermal / process and E&I design of Fired Heaters, Reaction Furnaces, Reformers, SCR’s WHRU’s, Boilers, Incinerators, Flares and associated ancillary equipment. Very strong E&I, DCS / PLC & BMS skills.

By working 17 years in the field of petrochemical field, I experienced all kinds of key projects like FCCU, Hydro-cracking unit, Hydro-treating unit and have expert ability to do piping static and dynamic stress analysis. Also I have five years working experience as a mechanical engineer in refinery

35 years of experience in the process industry working for engineering firms, equipment manufacturers, chemical company

I am proficient in researching title and court records, including but not limited to conveyances, mortgages and other indexes, along with curing said title when needed. I am able to determine from said title or records mineral and/or surface ownership in Louisiana, Mississippi, Alabama and Texas.

Conducting a piping training program from zero skill up to a skill trainees supervising the assigned work from planning, organizing, leading and controlling. Performed piping work activities from designing and drawing the piping tie-in to existing pipelines, drawing various structural platform

Twenty years of professional experience in, design, consultancy, construction and maintenance, covering a broad range.

25 years of experience in construction, installation, commissioning, testing and maintenance of Electrical, Electronics and Instrumentation equipments and controls in Petrochemical Industry

Have more than 20 years experience in Piping Design and Engineering including Stress Analysis and Piping Materials Control for various projects in petrochemical plants, refineries and commercial chemical plants. Presently working in Worley Parsons (Colt Engineering Corporation), Calgary, Canada

A challenging position in a result-oriented company that seeks an ambitious Person, where acquire professional skills and devotion towards safety on priority, sharing of knowledge as a learning point and grow with the company in allocated budget and high safety/quality services to the client.

A result-oriented and talented professional with an extensive experience 26 years in the oil & gas industry . Expertise in commissioning, DCS control room operations, oil refining processing , crude oil & gas processing, oil & gas operational environment.

PMS-Planned Maintenance and Spares & Purchase Database administrator and building.

Rig Manager/ Drilling Superintendent/ Drilling Supervisor.

Over 18 years experience in 2D and 3D seismic data processing. Processing land desert and mountain data. Processing experience gained in Geofizyka Krakow Ltd, WesternGeco and CGGVeritas. User knowledge of Unix, Linux , excellent Omega SPS and Tango, basic ProMAX. Good MS Office skills.

First 1 2 3 4 5 6 7 8 [ 9 ] 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out