Resume - Experience of GE LM2500 & LM6000 Installations and GT's. Educated to BTEC HNC ac...

Misco Jobs

Resume #78983

CONTACT INFORMATION:
View contact information...

Employment

16/06/2008 – Present Granite International (GSI), Central Europe

I am currently hired via GSI and utilised on various GE owned businesses, predominantly Aero. I am presently assigned to Installation & Commissioning on-site training of GE's LM6000 packages with the prospect of becoming a TA for GE installations worldwide. I previously spent 6 months in GE Energy service workshops based in Rheden, The Netherlands. Though relatively new to working with the internal components I gained knowledge and experience whilst applying my skills working on all aspects of their LM6000 Gas Turbines. From time to time I also assist GE Water Technologies on their mobile water treatment purification trailers as an Operations & Maintenance Technician. As an experienced tradesman and Gas Turbine operator, I am considered for contracts with GE Energy Rentals to further provide skilled labor on both Engine Maintenance Support, and Operations & Maintenance of their TM2500 Mobile Power Plant.

01/04/2008 – 10/05/2008 NRG Global, Pakistan

Working self employed I was utilised in planned maintenance of seven General Electric LM2500 Gas Generators. Having previous experience of the site and equipment on the original installation and the operations, I was approached to assist Aero representatives in carrying out removal of engine, top casing and blade changes, as well as hot sections and nozzle changes. In between maintenance periods I was also required as an Operations and Maintenance Technician to ease pressure from longer term site staff.

13/09/2007 – 31/03/2008 Granite International (GSI), Central Europe

I was recruited predominantly to work alongside GE Aero Derivatives on European contracts. I have assisted Aero in the removal of engines (and in cases the Power Turbine) from the package for major overhaul. Re-installation & alignment, and pre commissioning of land mounted units, generally LM2500. Having an appreciation and experience of Operations and Maintenance of their TM2500 power plant as a package for GE Energy Rentals, I gained further experience solely on the LM2500 Gas Generator itself. Working to GE guidelines and procedures, fulfilling Aero FSR expectations, I now have a greater understanding of Engines and the strict mechanical work required, particularly on installs.

To become more flexible for Granite I accepted a request to attend classroom training for GE Water Technologies. I then worked on operations and maintenance within Europe on GE Mobile Water Treatment plants, providing various levels of purified water to suit client specification based upon plant requirements. I have gained further knowledge of chemistry and the direct use in water treatment. I have obtained operations and maintenance experience of mobile plant including 6 stage Filtration Systems, Reverse Osmosis, De-Aerators and DI Trailers and their effectiveness and efficiency within the water purification and treatment industry.

08/06/2007 – 03/08/2007 NRG Global, Kuwait

Installation Supervisor: Working Self Employed as PB Globetech Ltd, however sub-contracted to TC Power via NRG Global on a rotating shift basis. Working as a team member my role is to oversee and assist in a new installation of six General Electric LM6000 gas turbine units. Responsibilities include liaising with client on a daily basis regarding progress, safety concerns if applicable and relevant issues. Accountable to Project and Installation Managers I am supervising a team of ex-patriots, and local labor of up to 20 personnel.
Additionally
* Responsible for install progress and updates
* Responsible for implementing health and safety measures
* Ensuring all mechanical lift machinery are operational and available
* Progression of installation and commissioning movements
* Identification and rectification of problems

08/12/2006 – 27/05/2007 NRG Global, Pakistan

Mechanical Technician/Turbine Operator: Working Self Employed however subcontracted to General Electric Energy Rentals via NRG Global I was part of a team responsible for the installation, operation and maintenance of seven TM2500 mobile gas generators utilised on a WAPDA Power Station in Pakistan.
Additionally:
* Self motivated mechanical technician and turbine operator
* Key team member within specialist install team
* Shaft alignment technician utilising Pruftechnik Rotalign Pro
* Condition monitoring of package machinery
* Contribution towards operator training of local personnel and ex patriots
* Familiar with relative local and remote HMI computer operations software
* Team empowerment and inspiration. Also able to contribute greatly on own initiative

28/04/2006 – 01/12/2006 NRG Global, South Africa

Mechanical Lead/Turbine Operator: Operating via NRG Global I was subcontracted to General Electric Energy Rentals for a period of seven months. I was responsible for the installation, operation and de-mobilisation of three TM2500 mobile gas generators based on a PetroSA Oil Refinery.
Additionally:
* Contribution towards achieving install deadlines as a key member
* Shaft alignment technician utilising Pruftechnik Rotalign Pro
* Ensured effective maintenance of relative machinery
* Ensured client dispatch requirements were fulfilled
* Maintaining a very good client relationship
* Appointed leading mechanical hand relative to de-mobilisation
* Achieved record de-mobilisation target, whilst ensuring health and safety requirements were the optimum goal throughout

01/09/2004 – 23/02/2006 IPM Industries, Thornaby

Service Engineer: Employed on a permanent basis to overhaul client pumping equipment, whether on site or in the IPM workshops. When necessary I was also subcontracted out to local and national refineries, steelmakers and chemical industries. I was also utilised overseas installing and demobilising mobile power generation equipment for General Electric.
Additionally:
* Rotating equipment specialist
* Competent in maintaining heavy plant machinery and equipment
* Rotalign Pro laser alignment technician
* Maintaining good client relationship via personal conduct
* Health and safety awareness

02/04/2001 – 27/08/2004 Ceetak Engineering Ltd, Middlesbrough

Service Engineer: Employed on a permanent basis to overhaul a wide range of client pumping apparatus and rotating equipment both on site and workshop based. Responsibilities included quotations, recommendations and sourcing of spares and replacement units. Within this role I was required to assist the workshop manager and area sales engineer by taking on some of their duties on a regular basis.
Additionally:
* Rotating equipment specialist
* Optiline laser alignment technician
* Administration
* Knowledge of working in petrochemical, chemical, oil & gas and pharmaceutical industries
* Health and safety awareness o
* Management of workshop and stores

16/11/1998 – 30/03/2001 SLD Pumps Ltd, Chester le Street

Diesel Pump Fitter: Employed on a permanent basis to overhaul a range of diesel and electric driven Godwin self priming pump sets within the company fleet. Based in the central repair centre I was responsible for the repair/overhaul for a range of diesel engines, self priming pumps, compressors and vacuum pumps, as well as rectifying any chassis damage. All serviced pump sets were performance tested in house prior to release from the centre.
Additionally:
* Rotating equipment specialist
* Manufacture of 12/24v engine wiring looms
* Knowledge of Volvo, Cummings, Perkins, Ford and Lister-Petter diesel engines
* Manufacture of brackets and steelwork
* Occasional management of stores and stock levels
* Compliance with company and OEM standards

16/06/1992 – 13/11/1998 Clydesdale Forge Co, Hartlepool

Mechanical Technician: I was initially recruited as an apprentice on a permanent basis, and retained as a fully qualified Technician following completion of my apprenticeship. Responsible for repairs and maintenance of all company machinery, and ensuring all plant equipment was kept in good operating condition. I was selected to be part of a product improvement team for my mechanical input and system modification suggestions. I also set up a PC controlled routine maintenance schedule to aid prolonging component life and reducing machine downtimes.
Additionally:
* Knowledge and competency in maintaining a range of forging and stamping machinery
* Control of PC assisted routine maintenance
* Knowledge of pumps & valves, hydraulics & pneumatic systems, brake & clutch systems, cams and followers
* Enthusiastic team player

Skills

* Capable, competent, reliable and responsible
* Ability to work on own initiative or as a team member
* Methodical and able to apply fault finding techniques
* Very good communication and administration skills
* Trained alignment technician
* Computer literate
* Welding and fabrication
* Basic electrical skills
* Basic lathe skills

Education

1987 – 1992 The English Martyrs Comprehensive School, Hartlepool
(GCSE'S) Mathematics, Modular Science, Art and Design, Graphic Design, English Language,
English Literature, History, French, Religious Studies
1992 – 1993 Stockton & Billingham Technical College, Stockton
BTEC First Certificate in Engineering
1993 – 1995 Hartlepool College of Further Education, Hartlepool
BTEC National Certificate in Mechanical & Production Engineering
1995 – 1997 Hartlepool College of Further Education, Hartlepool
BTEC Higher National Certificate in Mechanical & Production Engineering

Training Courses

Jun 1993 Entra (Engineering Training Authority)
NVQ Level 1 & 2 Mechanical Maintenance Skills
Jan 1996 Clydesdale Forge Engineering Company
Slinging and Pendant Controlled Overhead Crane Driving
Oct 1996 Entra (Engineering Training Authority)
NVQ Level 3 Engineering Maintenance - Mechanical
Oct 1999 SLD Pumps Limited
Counterbalance Fork Lift Truck Operator Certificate
Sep 2001 Ceetak Engineering Limited
Glandless Pump Maintenance Competency Certificate
Sep 2001 Ceetak Engineering Limited
Centrifugal Pump Maintenance Competency Certificate
Sep 2001 Ceetak Engineering Limited
Vacuum Pump Maintenance Competency Certificate
Sep 2001 Ceetak Engineering Limited
Progressive Cavity & Positive Displacement Maintenance Competency Certificate
Sep 2001 Ceetak Engineering Limited
Mechanical Seal Maintenance Competency Training
Jun 2002 Pruftechnik AG
Optiline Laser Alignment Training (Uncertified)
July 2002 AES Seal Plc
Mechanical Seal & Systems Training Course
Sep 2002 AES Seal Plc
AES Seal Correspondence Course – Bronze Award
Jun 2003 Pruftecknik AG
Vibrotech Condition Monitoring Training (Uncertified)
Sep 2004 IPM Industries – In House
Rotalign Pro Laser Alignment Training (Uncertified)
Jun 2006 General Electric – Non certificated EHS Training in accordance with GE policy (NRG)
May 2007 NRG Global – In House
Rotalign Ultra Laser Alignment Training (Uncertified)
Sep 2007 General Electric – Non certificated EHS Training in accordance with GE policy (GSI)
Nov 2007 General Electric – Non certificated mobile flow school, GE Water (GSI)

Hobbies

* Motorbikes
* Travel
* Cycling
* Running

References

* Available Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9651 to 9700 of 10902)

Go to Search Parameters...

Brief Description

Cu Au Exploration Geologist

Cad Operator

QA/QC Inspector, engineer

Exceptional Facility and Construction Management Executive

Mapping, surveying, mudlogging, excel, word, geothermal

Electrical Manager with 15 years Project Management & Maintenance Experience with Hands on Experience on 220KV, Hot ESP, 4000KW VVVF drive, Furnace Transformers etc

B.Sc. Mechanical Engineer, having Fifteen years of technical and HSE experience including three years in UAE as HSE Manager. Presently working with Eni Pakistan Oil and Gas E & P Company as HSE Advisor (Projects).

Professional experience in QC Document Control, Project Cost Reporting, Materials Control, Logistics, Administration, NDT Supervision, NDT reporting, QA/QC etc. with Oil & Gas and Marine (Onshore & Offshore).

Lab skills: Ion Chromatography, Spectroscopy, Copper Sampling, Lead sampling, Protein Sampling. Maple, Mathcad, Hysys, Microsoft Office products. Fluent in English, French, and Arabic.

A Chemical Engineer with fifteen years of experience in design, construction and management of capital projects related to the Oil and Gas industries. Offering skill in all phases of capital project management, to include planning, design, budgeting, scheduling, safety/HAZOP, team leadership

Working as Sr. Document Controller

I have been working extensively with M/s. Saudi Wiemer & Trachte Ltd., Riyadh for ten (10) years in their Tendering & Procurement Dept. The company has given me an experience and a clear edge over my professional peers.

Currently completing the final year for the degree, Masters in Petroleum Well Engineering. Expected graduation February 2006

audits – compiling safety meeting data – safety meeting presentation – worker’s Three (3) years experience in Safety – accident/incident reports – safety compensation – drafting Emergency and Fire Prevention plans – OSHA regulations and logs Three (3) years experience in Purchasing/Warehousing.

GIS, Geologist have more than 7yrs experience, ArcGIS, CAd, GPS, Field survey

B.E Mechanical Engineer with 3.4 years Direct Sales & Marketing Experience

Working as Asst Manager – Contracts & Procurement in Heramec Ltd. (E&P Oil & Gas Company) Skills: Negotiation, Procurement, Contracts, Purchase, Tenders, EOI, Letter of Intent, Recommendation of award of contract, Stores procedures, stock taking, Qualification: B.Tech Mechanical NITW (REC Warangal)

Certified CISCO, CCNA (Cisco Certified Network Associate), Microsoft Certified Windows 2000 Server, Microsoft Certified Windows XP Professional, Certified VLSI-Based Communication Application Design, Very Good knowledge of Operating Systems Win 3.11/95/98/ME/2000NT, Good knowledge of GSM and GPRS

Mechanical Engieer

Electrical Eng./Supervisor - Power Plant

I'm a chemical process engineer, i have a good experience in drilling fluids, waste treatment, oil refining and oil production.

Software Skills o AutoCAD 2008 o Autodesk Inventor 2008 o Tribon M3- Pipe modelling, Structure modelling, Design Manager o Rhinoceros 4.0 Nurbs modeling o Solidworks o Primavera Project Management P3 o MS Office Suite - Word, Excel, Power Point, Outlook, Project

7 years experience in designing structure,Mechanical & piping systems in 2D & 3D, using AutoCAD 2008, fast learner of new design programs, use MechQ full suite, Cadworx pipe, Bentley Plantspace v8, Bentley Navigator, no problem to work with other designing software

Denver Area Geologist

Recent Graduate. Materials/Metallurgical Engineer, Some Project Managment Experience in a Consulting Evironment. Looking for Work in Britich Columbia.

Material Manager

Occupational Hygiene

I’m a mechanical engineer with more than fifteen years of experience in project engineering, project management, procurement and maintenance management. I’m a team oriented person with excellent communication skills and strong leadership.

SECURITY MANAGER COORDINATOR SAFETY

Finished trade as Heavy Diesel Mechanic August 2009 work on heavy earthmoving equipment for 3 years as well as Air Start Underground equipment for 5 months at Rio Tinto Site. Six month work as Breakdown Fitter at a Rio Tinto site Australia for contracting company.

I am not looking for just another pay cheque. I enjoy my work and am proud of my profession. Your company providing an excellent services. I share the values that make this possible, which should enable me to fit in and complement the team.

I am able to work on my own or as part as a team, to get the required job done to the best of my ability. I am able to dael with any problems that may arise and I am willing to learn new skills to help with my career. I have qualifications from college and from various manufactures.

Oil & Gas International Sales and Business Development Manager

Responsibilities included recording net income and expenses for various oil & gas properties; paying oil & gas operating statements; plotting oil & gas production; computing oil & gas economics; updated railroad commission’s rules and regulations; pulled and filed oil & gas completion reports. Crea

IOSH, S.T.O.P., Risk Assessment, Manual Handling

OBJECTIVE To secure an internship that will help offset college costs and also providing invaluable experience that will prepare for future employment.

Roustabout or Rigger position desired.

Looking for a Job as Project Manager or Proposals Manager in a reputed company

Hard Worker, Honest, Trust, Finish objectives in time and in proper way

I am a motivated individual, who is willing to learn new skills to develop on both a personal and professional level.

I'm a 23 years old guy done with his Electronics BS degree with minor study of Biomedical engineering and a 3years experience in this field and I'm going to graduate with my second BS degree in Electrical engineering in February 2008.. I'm looking to be a part of a team in good company..

Extensive experience & strong, decisive, and profitable leadership in utility & pipeline design,construction & maintenance management. Keen financial, negotiating, and strategic planning performance. Consistent and measurable gains in operations, safety, quality, efficiency and productivity.

I'm mechanical engineer specialized in hydraulic and pneumatic installations, with a large experience in design, maintenance, reparation for this equipments in various industry(civil, constructions, marine, production)

Experience of GE LM2500 & LM6000 Installations and GT's. Educated to BTEC HNC academic, and GNVQ 3 Trade Certs. I have installation & Commissioning of both LM2500 LM6000 packages and Operations & Maintenance of GE's trailer mounted LM2500 Gas Turbine.

Seeking business development position with multinational organization involved with turnkey type projects where my background of over 16 years progressive oil and gas industry experience will provide value creation to grow business.

Experience in maintenance & condition monitoring of rotating machinery. I am totally at ease with Condition Monitoring Software packages and have the advantage of knowing Microsoft Office (WinWord, Access, Excel & PowerPoint). I am also fully conversant with SAP system.

Fresher with diploma&engineering and with good knowledge in design and design softwares like CATIA,UG,PRO-E

I have done a 4year degree course (B.Tech) in Mechanical Engineering from an autonomous institute. My software knowledge is eqipped with Auto Cad and Pro-E Softwares.My communication skills are excellent.

I am entry level Geological Engineer eager and willing to learn and see the world!

i have good IT skills and Construction coordinator, excavator and Truck master driver, Bar supervisor, mechanical engineer

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 [ 194 ] 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out