Resume - Safety Specialist with OSHA 500 & 511 certifacations

Misco Jobs

Resume #78995

CONTACT INFORMATION:
View contact information...

Objective:
To obtain a position that will best utilize my experience and expertise and allow me to be an asset to the mutual benefit of both my employer and me.

Education:
Graduated from Campbell County High School in 1979
May 1993 Texas A&M Engineering Extension Service
Industrial Fire Fighter
NCCER Certified Plus (Pipe Fitter)
Fluor HSE Leadership Training
BP Job Rep Training
JMW Leadership Training
TWIC Card
OSHA 10 hour class
OSHA 30 hour class
OSHA 500 class
OSHA 511 class

Summary of Experience:
Twenty-six years experience in construction and maintenance. I have a strong safety back ground and mechanical background in supervision, planning, and fabrication on maintenance, turnaround, and new construction projects. I have 12 years experience in photography and have spent the last three years doing plant photography along with my job duties. FCCU, furnaces, Crude, Ethanol and Phosphate Plants are some of the units where most of my planning and supervision has been used over the past 15 years. I am familiar with all types of mechanical equipment. I take pride in never having a recordable or doctor's case. Safety is a very important part of all jobs.
1979 ¡V 1983 U.S. Army Airborne National Guard Fort Benning, GA
Work Experience:

Safety Specialist Tray-Tec 6/08 - Present
* Hexion Deer Park Deer Park, TX
Responsibilities included working hand in hand with the head Hexion Environmental Health & Safety doing plant wide audits, third party safety for all contractors and leading the team that is writing JRA's & SOP's Plant wide. (Job Risk Analyst & Standard Operating Procedures) Building spread sheets to organize and track all work and progress. I also do all of the plants photography for incident investigation and training material.

Safety Specialist Innovative EH&S 3/08 ¡V 5/08
* Hexion Deer Park Deer Park, TX
Responsibilities included the writing of JRA's (Job Risk Analyst) for every job that Hexion does. Writing or rewriting SOP's (Standard Operating Procedures) I also do all of the plants photography for incidents and training material. I also do all of the plants photography for incident investigation and training material.

T/A Coordinator/Safety Shell / ITC 12/07 ¡V 3/08
* Shell Deer Park Deer Park, TX
Responsibilities included the planning and execution of piping installation during pre-turnaround and turnaround work. Coordinated pipe fitters, boiler makers & welders. Removal of bundles and cleaning of exchangers. Coordinated the expedition of the piping, helped create rigging plans and obtained the permits to complete these tasks with zero incident or injuries. Over 1 million hours with out a recordable. Turnaround photographer for up dates and tracking equipment repairs.

Job Rep-Safety T/A Coordinator Fluor / ITC 9/06 ¡V 12/07

* BP Texas City Site Texas City, TX
Responsibilities included daily safety audits of all work sites, morning group safety meeting for the project and setting up the safety topics for daily tool box meetings. The planning and execution of piping, demolition and installation, Opening of Drums, Towers, & Exchangers for inspection and repairs. Obtained ATW's for various job on the PS3B Turn Around. Supervised various contractors in their daily activities. T/A photographer for updates and pictures for upper management took over 14000 pictures of the T/A. Over 3.5 million hours with out a recordable.

Pipe Fitter General Foreman, S&B Engineers 06/06 ¡V 09/06
* LCR Refinery Deer Park, TX
Supervised 3 - 15 men crews in the construction of new sulphur removal unit at Lyondell-Citgo Refinery in Pasadena, TX. Coordinated the expedition of the piping, created rigging plans and obtained the permits to complete these tasks with zero incident or injuries.

Pipe Fitter Foreman, JV Piping 01/06 ¡V 05/06
* ƒnValero Refinery Memphis, TN
Responsibilities included the planning and execution of piping installation during pre-turnaround and turnaround work. Coordinated pipe fitters, welders, rig operators, scaffold builders. Planned mobile equipment use for daily maintenance. Supervised 15-20 men crew to demo and install piping during turnaround. Coordinated the expedition of the piping, created rigging plans and obtained the permits to complete these tasks with zero incident or injuries.

Pipe Fitter General Foreman, Sanders Brothers 5/05 ¡V 12/05
* ƒnDuPont Staley Loudon, TN
Responsibilities included the planning and execution of piping installation of new construction projects. Worked with service contractors to coordinate proper and effective work schedules to obtain peak performance from all contractors without delay and done in a safe and timely manner.

Pipe Fitter General Foreman, J.E Merit Construction Company 1/05 ¡V 4/05
* ƒnPCS Phosphate Plant Aurora, NC
Responsible for obtaining permits, demo and replacement of piping and structural steel on various maintenance jobs. Fabricated pipe in fabrication shop, obtained dimensions and detailed drawings of piping replacement, installed all piping and structural steel.

Software Knowledge
Microsoft Word, Excel, Outlook, Power Point, Photo Shop CSII, Photo Shop CS III, Light Room

References:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5701 to 5750 of 10816)

Go to Search Parameters...

Brief Description

25 years experience in Planning/Project/Detailed Engineering of Oil and Gas Plants, Petroleum Refineries and Petrochemical Plants

CFD (Computational Fluid Dynamics), Multiphase/Multi-component flows, Fluid Flows, FSI (Fluid Structure Interaction), ASI (Arbitrary Sliding Interfaces), Heat Transfer, Thermal engineering, Design/development, Combustion, Chemical/Reaction Kinetics and Chemical simulation, PhD, Mechanial Engineering

Total 6½ of years experience in the field of power plant and GOC in various projects. Preparation of GA and preliminary piping layout with Design principles, creation and review of P&ID’s, Review of vendor information, review of contracts with respect to system description, highly proficient using I

Automation Engineer, I have worked in different company for electronic devices and actually in Oil and Gas field us an engineer automation for DCS and Safety syetems, for more details Plaise see my CV here.

I have first aid & WHIMIS certificates, as well as CWB tickets in SMAW 1GF, 2GF and flux core 1GF.

B.Sc Computer Sc,MBCS,MCPRN,MBA(In View), Oracle Database Admin, Microsoft Office 2003 & 2007 Suite, Unix, User, System ad Application Support, Data-Center Administration

Entry level

lab chemist - Analysing naptha, fuel oil , lube oil , different water samples (all parameters )

Well Testing Mobile unit Supervisor

Duties included design and drafting; instrument drawings and documentation such as instrument plans, installation details, creating databases and maintaining an instrument index, and numerous on-site surveys and field work for modification project.

Instrumentation Engg done the project in Hikal (Agro-Chemical company)

I am a young innovative technichian seeking a full-time position with your company.

Project Management / Construction Management / EPC / EPCM / PMC

Entry Level Petrol. Engineer

loaded chemical into varies transports for georgia gulf.

Fresh graduate of Petroleum , i did work with BP Pakistan as internee and also have command on Prosper software please give me a single chance so in this way i can show my skills and talent .

Construction Administration/Project Controls

I am looking job in instrumentation field as instrument SUPERVISOR/INSPECTOR/SR.TECH

Paramedic/Offshore medic with 19 years experience in Oil, Gas & Renewable Energy industries

seismic interpreter with a strong background in petroleum and structural geology, gained through working on a wide range of fields in different structural settings in the Syrian Euphrates Graben area. A skilled user of the Geoframe and OpenWorks software suite. Completed seismic interpretation

I am a Mechanical Engineer having Post graduation diploma in power plant ,working since Nov'02 in the field of power plant execution

5+ years production and design experience in refinery, PDS, PROCAD, Microstation, AUTOCAD,LDT

Process Engineer

My skills include the performing maintenance work and repairs on transmitters: SW, FM and AM. Maintenance work on Exchange Equipment: CDMA, trunk, lines. CCNA IN VIEW.

Ability to work as a team with little or no supervision. I read polymer and textile Engineering.

Abity to work with little supervision,counseling ,Bsc Industrial chemistry

Excellent communication skills -english:oral and written.Leadership skills :As a leader of the project team assisted the team in solving the problems that arose.Computer Proficiency:Ms Word,Excel,Powerpoint.Software:Intouch(SCADA).PrimaveraP3

Government Girls Comprehensive Secondary School 2008 – 2009

Mechanical Engineer with Piping Engineering Knowledge

I have a Bachelor of Science in Computer Science and in March '09; i will be getting my Microsoft Certified Professional and Microsoft Certified Technical Specialist - SharePoint papers. I have a managed a number of large software projects in Zambia, mostly in the capacity of project manager.

I am working in chicago Bridge & Iron (CBI) an EPC company, in Saudi Arabia as a Field Engineer.I have the ability to work both in field and office, also, ready for extensive travel.I am team player with good communication skills.

BA in Geoscience; 1 year experience cased hole wireline; intern for geology consultant in DJ Basin

Safety Specialist with OSHA 500 & 511 certifacations

With knowledge in SMAW 6G,TIG,GTAW,OAW. and Brazing welding. Plasma and Oxy Acetylene cutting, Lathe Machine operation, Pipe fitting Jobs and fabrication. Operate the forklift ,crane and wenches

Senior CMMS Engineer and Business Process Engineer with expertise in Oil & Gas plant Enterprise Asset Management with extensive experience in Maintenance, Material Management and Procurement; plant data collection and quality check.

EMPLOYMENT WITH Eni ,Bhit Gas Field Pakistan (Italian Oil & Gas Company)

Project leader and technical manager for heavy crude

I have 34 yrs Crane Operator experence, 4 yrs Crane, Rigging, & Mechanical Trainer experence. I have offshore crane operator exp. and onshore crane operator exp.

Senior Estimator Available to work in Indonesia, Malaysia, Nigeria, Kazakhastan, Thailand

More than 13 years of working experience with Major Oil & Gas Industries for their Documentation with responsibilities in Technical Documentation, Library system, Supervision, Administrative, Vendor, Procurement & Project Management etc.

Total 16 Years of diverse experience in Piping/Mechanical design of Refineries, Chemicals, Petrochemicals, Fertilisers Plants. 5 years experience in Operating Refinery of KNPC. 9 years of cosultancy (EPC) experience. 2 years of Piping design & construction experience.

Seven years of experience in oil and gas upstream industry as geophysicist. Currently involved in exploration & development of a deep-water lease in East Coast of India with multiple play/prospect (gas) discovery identified by 15 successful exploratory wells.

Over ten years of experience in the field of Electronics and Computer Engineering

Instrument design engineer in BHEL (Bharat Heavy Electricals Ltd), Hyderabad, India in Control & Instrumentation (C&I) department in Steam Turbine, Compressor & Gas turbine Engineering division. DNV certified HSE lead auditor

Since 1995, I have worked as a Planning Engineer / Maintenance Planner in Oil & Gas Industrial, both on offshore and onshore terminal, worked for ARCO, BP and CNOOC companies. Response for Opertioans and Maintenance work activities, good at CMMS-MAXIMO, MS Project, P3 Project Planner.

Completions/Production Engineering Experience

working in Malaysia ( far east) from 3 and 1/2 yrs. Looking for jobs in oil & gas fields . In field operators or panel operators position with better salary as a long term contract basis preferable in far east or middle east.

I am a degree holder in Mechanical Engineering, having more than 13 years of experience in various types of Refinery and Petrochemical project.

Cost Engineer with exposure to Planning. Russian-mother tongue. English - fluent. Arabic - working knowledge

13 Years Strong Experience & Exposure in The Arena Of I&C Systems Successfully handled numerous large scale projects Worked with SCADA, PLCs and DCS Strong at commissioning, testing, documentation and handling of O&M Effectively led teams to deliver positive and timely results

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 [ 115 ] 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out