Resume - BS Chemical Engr. with 15 years onshore/offshore oil/gas production engineering ...

Misco Jobs

Resume #79065

CONTACT INFORMATION:
View contact information...

January, 2009

Age: 49 Status: Single
Health: Excellent, no physical limitations
Nationality: USA

Work focus: Work offshore/onshore overseas in facilities engineering, operations, planning, process simulation, troubleshooting, analyzing, designing, scoping, cost/economic/investment analysis for oil/gas/pipeline surface production/processing facilities. This could be in the areas of providing engineering services with a tech support group or as an on-site senior oil/gas facility engineer. Available Feb, 2009.

Career: 15 years onshore/offshore oil/gas production engineering support, facilities planning and design, capital project development and economic evaluation, operations, process simulation/optimization, commissioning, construction and maintenance. Have had extensive experience both in central planning and engineering services tech support as well as on-site facilities operation and start-up/commissioning. Excellent oral/written communication.

Placements: On-site Oil/Gas Production/Process Engr., Facilities Planning Engr. (Alaska and Saudi Arabia); Sr. Project Commissioning Engr.; Sr. Production Operations Engr, Staff Process Engr; Field Production Engr; Offshore Operations Engr.

Education: BS Chemical Engineer
University of New Mexico
Grad. December 1981 (top 10% of class)

Professional Training/Courses
Amoco Oil Co: Surface Facilities Design, Petroleum Engineering
Fire Training, Cold Water Survival
ARCO Alaska: Oil & Gas Surface Facilities Operation
Rotating Equipment & Compressors
Production Technology, Technical Writing
Corrosion Control, Hazard Analysis
Saudi Aramco: Gas Processing Technology
PRO II, HYSIM Steady State Simulation
Red Cross CPR/First Aide

Personal: Certified diver, softball, golf, cooking, member of Mensa

Detailed Experience:

Saudi Aramco (7 years)

Position: Staff Facilities Planning Engr, Gas/Producing/Distribution/Termina
Location: Dhahran, Saudi Arabia
Duties: Long range facility planning and project development, project cost/economic analysis, new facility equipment scoping/sizing, engineering studies, technical support of contract engineering services, oil/gas process and pipeline simulation, design review, project budgeting/funding administration.

Position: Sr. Process Commissioning Engr
Location: Safaniya Onshore Gas/Oil Separation Plant (GOSP), Eastern Saudi Arabia
Duties: Provide technical support for construction/commissioning 1,300 MBD wet crude handling facility with DCS. Develop/oversee hot tap installation packages and general construction inspection. Conduct facility design/process review, plant start-up, and develop/conduct new plant performance testing. Collaborate with project/contract management. Develop young Saudi Engrs.

Position: Safaniya Onshore/Offshore GOSP Operations Engr
Location: Safaniya Onshore GOSP, Eastern Saudi Arabia
Duties: On-site Operations Engr. for heavy crude GOSP (1,600 MBD) and medium crude GOSP (1,100 MBD). Processes include staged separation, desalting, gas compression, crude shipping, and DCS control. Coordinate operation/maintenance activities with offshore producing operations.

ARCO Alaska (5 years)

Position: GOSP (Flow Station 3) Sr. Facility Operations Engr
Location: Prudhoe Bay, Alaska (7 days on/7 days off)
Duties: On-site Operations Engr. for one of three 250 MBD GOSP's and associated drill sites in east Prudhoe Bay field. Processes include staged separation, gas compression and dehydration, crude shipping, water injection, gas injection/gas lift, well testing, and drill site operations support.

Position: Staff Facilities Planning Engr.
Location: Anchorage, Alaska
Duties: Planning, process, economic analysis, and project engr. for upgrading gas dehydration facilities for all ARCO GOSP's in Prudhoe Bay and Kuparuk Field. Developed economics and gained project approval. Project included retrofitting/modifying trayed glycol dehydration columns and regeneration strippers with structured packing to achieve -70oF dew point gas. Oversaw pilot plant testing, vendor selection, and project construction/commissioning/performance testing.

Position: Staff Facility Planning Engr.
Location: Anchorage, Alaska
Duties: Provide technical support for all ARCO Alaska oil/gas/pipeline operating facilities including; engineering studies, economic analysis, process simulation, troubleshooting, performance testing, process optimization, etc.

AMOCO Oil Co. (2 years)

Position: Production Engr, Elk Basin
Location: Powell, Wyoming
Duties: Oversaw Elk basin field production operations including; on-site producing well logging/cementing/perforating operations, well testing, designing workovers, and writing the annual field review report.

Position: Offshore Facility Engr, Cook Inlet
Location: Anchorage, Alaska
Duties: Provide process and mechanical engineering support for four offshore production platforms in Cook Inlet. Standard onshore and offshore oil production facilities including cathodic and impressed current corrosion protection systems.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7901 to 7950 of 10884)

Go to Search Parameters...

Brief Description

B Sc. Chemical engineering • Over 3 years experience including in process development

I'm petroleum and Gas Engineer in specilty Development and Exploitation of Oil & Gas fields,taking my degree from Kuban State Technical University Krasnodar Russian Federation in 1999.From this university done 1 year advance course in the same specialty

I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future

Knowledge Of Autocad, Pro-engineer, Catia, Unigraphics, Ideas

An accomplished Software Engineer specializing in Object-Oriented Design and Analysis with extensive experience in the full life cycle of the software design process including requirement definition, prototyping, proof of concept, design, interface implements, testing, and maintenance.

More than one and a half year of hands-on experience in Instrumentation and Project and Sales.

Control & Instrumentation Engineer with 5 year Exp in Detailed Engineering

I'm a geophysicist.

Ph.D. in Metallurgy, Specialist in Surface Treatments, Project Management, International Experience etc.

Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East

Senior piping designer

Turbine tech.

Instrument Engineer with more than 27 years of experience in execution of erection, testing & commissioning/ proposals in the field of Instrumentation Projects for Oil & Gas, Refinery, Petrochemical, Fertilizers and other Chemical & Process Industries.

It is my intention to secure a career in the field of Health and Safety on an oil/gas platform. However, since I am new to the industry, I will consider any position.

B. Eng. Petroleum & Gas Engineering University of Port Harcourt, Rivers State, Nigeria.

I can work floors, motors, and derricks.

I have a very strong back and am not affraid of hard work. I am very punctal

Geology, To be graduated.

BS Chemical Engr. with 15 years onshore/offshore oil/gas production engineering support, facilities planning and design, capital project development and economic evaluation, operations, process simulation/optimization, commissioning, construction and maintenance. Also trained young Saudi engineers

chemist, AUC english course, computer course, 2008 graduation

I have 31 years of Technical, Hydraulic Specialist, Fitter experience in S.A Air Force and on Majour Ind Steel Process Plants. Would like to become ROV operator.

BS Engineering, with 11 years experience in Shell Gas LPG (pak) as Health & Safety Officer/Operations Engineer, came to Canada in 2005, initially in Toronto but relocated in Calgary due to enhancement of my career in Oil & Gas field. In Toronto worked in ITN Food Corporation till June 2006.

Skill: I have worked as Production Shift Supervisor in Gas processing plant from 01-07-2000 to 31-03-2006. Successfully completed Basic Offshore Safety Induction & Emergency Training (OPITO Approved) conducted by MSTS ASIA in Malaysia, Nutec Group. Qualification: B.Sc. Engineer (Chemical), BUET.

More than 2.5 + years of experiences in the field of Planning as a Planning Engg(BE Mechanical Engg.). Analysis of Resource requirement, Performance analysis, Progress measurement, Monitoring & Reporting of EPC deliverables and activities of Pipeline projects

Mechanical Engr: Fabrication works as Mech w/Shop manager ,drawing study,planning,procurement,supervision QA/QC ,erection.

Knowledge & exp. in Electrical and Instrumentation products, in PLC, SCADA and HMI systems, drives, field instruments, Allen Bradley - Micrologix, SLC, ControlLogix, Compact Logix, Flex Logix PLC’s, Panel View Panel view plus Families, in Controlnet, Devicenet, RSView32, RSView SE Redundant

Microcontroller Application, Interfaces Application - PLC (SCADAPACK,OMRON,GE Fanuc, etc), ADAM RTU,EXPERT Module,Flow Compute (OMNI,Sybertrol,AutoExec), Compact PLC (MOXA ioLogik)

Skills: semi skilled fitter & turner, horizontal boring mill, veritcal borer, central lathe, fitter, oilmaker, piefitter, milling machine. I will be finishing my N2 early March to be qualified.

I am very much interested in Oil Gas Exploration.

I've studied chemical Engineering. I passed some curses in drilling fluids, well log, zagros formation studies, and also water treatment

I am a female geologist who is currently doing my masters in geology. I finished from the University of Port harcourt, rivers state In Nigeria. I am a team player and still able to work independently with minimum supervision.

More than three (3) years experience in Mechanical Engineering in offshore/ onshore Oil and Gas Production.Application of Incident and Injury free approach in project, HAZOP study in project.

Chartered Accountant with three years experience in Oil and Gas Industry

I would like to work with a company that is well established and stable.. I enjoy working in the Oil & Gas Industry because of the people I have meet and worked with...I want to learn more about different aspects of the Industry and look forward to moving up with a good company.

8+ years in the field of Cost Analysis (Estimation & Cost Control Function) for Refineries, Petrochemical Complexes, Oil & Gas Pipelines / Terminals and Fertilizer Projects

I work at present servicing a fuel storage depot as a Maintenance Electrician, Leading Hand. I have 6 years experience of this type of work and many specialised qualifications in this area.

Situations that may be transformed to improve define the main objective of my professional profile, problems that demand critical analysis, evaluation of variables, and proposition of novel solution strategies to overcome them. I am much motivated, well prepared, and ready to learn more everyday.

Mechanical engineer B.Tech. 6 yrs experience.(UAE) exp in dealing with contractors, sub contractors etc , contacts with major oil companies like adco,etc in UAE, excellent knowledge of UAE market .

can apply any job which you think I am fitting for

I am looking for a job in Oil Industry. I'm willing to "Hard work" and work with "Any entry level position" with your concern. I certainly would appreciate it very much if you could give me an opportunity in your company. I am confident of doing a good Job with your concern.

B.Tech/MBA,Total 5 + years experience in Mechanical & Construction Sectors. Working as CONTRACTS ENGINEER (Planning/Estimate/Proposal/Qty’ Surveyor) in M/s CAPE EAST LIMITED CO (W.L.L), DOHA, QATAR.

Chemical Process Engineer, Aspen Plus, HYSYS, MATLAB, CHEMCAD, Reviewing PFD, P&ID, Design Specifications

I m Final Year Student of Mechanical Engineer and will be pass out upto december 2006. I want utilize my knowledge and skills for an organization, which offers opportunities for personal growth and career development.

Icorr paint inspector/rope access technician

Experice engineer with project engineering and project managemnt

Mechanical Engineer

working in Ras gas - qatar as an instrument technician with 14 years experience. good knowledge in process instrumentation. good experience in yokagawa CS3000 and Foxboro I/A series Dcs. having diploma in electronics and telecommunication. pls see attached resumes for more details.

To continue employment in the field of oil & gas operations. I will bring dedication, good work ethics, and teamwork to your company.

Hard Working, faster to learn, Capable to working by individually or as a team and Capable to working in any different area

All qualifiations are posted on my resume exept that i have a passport.

First Prev 151 152 153 154 155 156 157 158 [ 159 ] 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out