Resume - Safety Supervisor

Misco Jobs

Resume #79174

CONTACT INFORMATION:
View contact information...

EDUCATION & TRAINING

Lamar University, Beaumont
Bachelor of Science in Criminal Justice Graduated: December 1990
Minor: Business Administration
Associate of Science in Law Enforcement

Texas Southern University, Houston, Texas
Thurgood Marshall School of Law June 1992 – May 1993

EMPLOYMENT HISTORY

Jacobs Engineering Group, Inc. February 2008 - Present
Safety Supervisor
Exxon Mobil ESP Project - Torrance, CA
Longhorn II Project Total Petrochemical - La Porte, TX
* Safety Supervision for the 700 million dollar project providing safety of iron works, civil excavation, insulation, electrical and metal work.
* Responsible for assembling all hands for weekly meetings and creating the weekly meeting agenda.
* Worked as supervisor over seven sub-contractors to act as a go between when safety issues arised.
* Also responsible for conducting required orientation meetings.
* Investigation of on-site incidents and the performance of site safety checks and completion of Safety Reports.
* Conducted Safety Sampling and Audits to develop static's to pin point potential safety issues.
* Safe work for 1,490,000 man hours without an OSHA recordable or lost time injury.
* Reduced the number of first aids form a high of 146 in June of 2008 down to a year low of 3 for the months of September and October of 2008.
* Planned a safe perimeter for the move of two large units.
* Consulted with Exxon/Mobil Fire and Safety to execute a ventilation plan for the confined space work conducted inside the structures.
* Employed the Exxon/Mobil Lock Out Tag Out procedure to insure that proper containment of power was achived each project.
* Worked to provide a hydration plan for personell to avoid heat stress or heat stroke, which included water, cool down stations, and ice pops during afternoon breaks.
* Assisted with the Jacobs Orientation which was provided for contractors Longhorn II Project Total Petrochemical La Porte Texas.
* My responsibilities are performing daily Safe Plan of Action (SPA's) audits, recording safety observations, conducting daily safety meetings, and promoting/monitoring a behavioral safety process.
* I also investigated incidents and complete the investigation reports for the project.
* Project peak workforce of 900 employees on two shifts, I supported the dayshift totaling 700 employees.
* Project scope of work was to revamp 7 different units to increase efficiency and production for the facility.

Brock Services December 2006 – February 2008
Site Safety Coordinator - Beaumont, TX,
Chevron Project - Pascagoula, MS

* The responsibilities of my roles were performing daily safety audits, daily tool box meetings, and orientation for new employees.
* I also oversaw audits in order to proactively identify and resolve issues.
* Anticipated, identified, and evaluated hazardous conditions and practices in order to ensure 100% compliance with safety policies throughout the job site.
* During my tenure, I emphasized prevention of personal injury and property damage through individual training.
* I worked closely with a special safety alliance call Contractor Safety Team (CST).
* The emphasis was on unity among the safety personnel at this facility.
* All members were required to attend a plant sponsored training to be a part of the CST.
* Once accepted members were expected to attend a safety walk thru twice a week, and a full facility walk once a month.
* The team worked to proactively erase the unseen boundaries that exist between the craft personnel and the safety professionals.
* Theses efforts produced an atmosphere of cooperation and helped to increase overall safety while reducing incidents and injuries.
* Conducted monthly urinalysis and took personnel to clinic as needed.
* Provided safe evacuation practices and procedures as well as doing a head count to ensure all personnel were accounted for during this period.
* All efforts were given to ensure that the client and company relationship was whole because of a safe work environment.

Brock Services December 2006 –Nov 2007
Site Safety Coordinator - Beaumont, TX,
Huntsman Project - Port Arthur, TX
* The responsibilities of my roles were performing daily safety audits, daily tool box meetings, and orientation for new employees.
* I also oversaw audits in order to proactively identify and resolve issues. Anticipated, identified, and evaluated hazardous conditions and practices in order to ensure 100% compliance with safety policies throughout the job site.
* During my tenure, I emphasized prevention of personal injury and property damage through individual training.
* Under my, supervision the safety staff which included 8-10 technicians working two shifts was able to achieve the million hour plus mile stone of working without a loss time injury.
* This was a multi-phased project which started as a repair from storm damage due to hurricane Rita this took in the 5 units at this facility.
* The safety group took an active part to ensure that each employee was able to work in the safest environment that was available under the conditions that were at hand.
* Oversaw the lock out process for the cooling fans, this involved locking out both the MCC, and the actual fan.
* All of the work on these fans did involve confined space entry procedure along with these I also oversaw confined space entries for the super- heaters.
* Made the sure that all tower entries were NORM tested prior to entry and that all fresh air and breathing air requirements were adhered to.
* Responsible for the investigation of any incident, injury or conflict involving company personnel, also I was in charge of the monthly random urinalysis which would involve 150 samples.
* Transported personnel to and from the clinic as the situation dictated. Completed all required monthly reports, and I worked to ensure that company and client relations remained viable by providing a safe work record for both.

CAM Environmental Health and Safety June 2003 – November 2006
Safety Technician - Nederland, TX

* The responsibilities of my roles were performing daily safety audits, daily tool box meetings, and orientation for new employees.
* Oversaw audits in order to proactively identify and resolve issues.
* Anticipated, identified, and evaluated hazardous conditions and practices in order to ensure 100% compliance with safety policies throughout the job site.
* During my tenure, I emphasized prevention of personal injury and property damage through individual training.
* The bulk of my duties involved hands on approach to providing a secure working area for the personnel working in the areas there was heavy emphasis given to respiratory PPE and additional outer garments to maximize the effectiveness of the safety process.
* Goals set were to help the staff maintain peak health.
* This involved the daily inspection of the equipment used by the workers to ensure all safety procedures were followed properly for both cleaning and storage

Evans Environmental and Geological January 2002 – June 2003
* Field Safety Tech Asbestos Supervisor and Inspector – Port St. Luci, FL; Gulf Port, MS; New Orleans and Lake Charles, LA; Pascagoula, MS Field Safety Tech Asbestos Supervisor and Inspector.
* The responsibilities of my roles were performing daily safety audits, daily tool box meetings, and orientation for new employees.
* Oversaw audits in order to proactively identify and resolve issues.
* Anticipated, identified, and evaluated hazardous conditions and practices in order to ensure 100% compliance with safety policies throughout the job site.
* During my tenure, I emphasized prevention of personal injury and property damage through individual training.
Envirotest April 2001 – December 2001
Environmental Consultant and Remediation Demolition and Rebuild Supervisor - Houston, TX

* The responsibilities of my roles were performing daily safety audits, daily tool box meetings, and orientation for new employees.
* Oversaw audits in order to proactively identify and resolve issues.
* Anticipated, identified, and evaluated hazardous conditions and practices in order to ensure 100% compliance with safety policies throughout the job site.
* During my tenure, I emphasized prevention of personal injury and property damage through individual training

Restored Living Consultants January 2000 – February 2001
Remediation Sales Consultant Estimator and Project Supervisor - Houston, TX

* Formed a remediation business and set company objectives, made projections for expected receivables.
* Developed business plan to meet objectives of the mold extraction industry.
* Identified target through the business to business relationship adjusters insurance.
* Establish a certified vendor relationship with major insurance carriers.
* Conducted home inspections for clients and explained the growth process of mold.
* Consulted with clients by aiding them in the homeowners insurance claims process for a water loss.
* Wrote remediation proposals and presented them to clients and insurance adjusters.
* Developed project plan that would achieve proper abatement and successful air clearance results.
* Daily assignment dispatch of work crews and on site walk through with foreman for new projects
* Provide cleaning and climate controlled for storage of personal property of residents.
* Conducted pre and final inspections of containments and prior to air post air test.
* Completed 'financial transactions with homeowners by collecting payment for services preformed.

EMPLOYMENT HISTORY (con't)

Advanced Remediation Services February 1999 – December 1999
Partner Senior Remediation Sales Consultant, Estimator and Project Supervisor - Houston, TX

* Formed a remediation business and set company objectives, made projections for expected receivables.
* Developed business plan to meet objectives of the mold extraction industry.
* Identified target through the business to business relationship adjusters insurance.
* Establish a certified vendor relationship with major insurance carriers.
* Conducted home inspections for clients and explained the growth process of mold.
* Consulted with clients by aiding them in the homeowners insurance claims process for a water loss.
* Wrote remediation proposals and presented them to clients and insurance adjusters.
* Developed project plan that would achieve proper abatement and successful air clearance results.
* Daily assignment dispatch of work crews and on site walk through with foreman for new projects
* Provide cleaning and climate controlled for storage of personal property of residents.
* Conducted pre and final inspections of containments and prior to air post air test.
* Completed 'financial transactions with homeowners by collecting payment for services preformed.

CONSTRUCTION MANAGEMENT
* Safety supervision of iron works, civil excavation, insulation and metal work.
* Conducted orientation meetings, and weekly all-hands and safety meetings for each trade under Brock Services at the plant.
* Investigated on-site incidents, recorded the performance of site safety checks and completed safety reports for the projects. Responsibilities include performing daily Safe Plan of Action (SPA's) audits, recording safety observations, conducting daily safety meetings, and promoting/monitoring a behavioral safety process.
* Project peak workforce of 900 employees on two shifts; supported 700 dayshift employees.
* Revamped 7 units to increase efficiency and production for the site facility.
* Site Safety Coordinator on site with a safety staff of eight to provide services to all Brock personnel and helped foster good relationships with the client Huntsman and other sub-contractors on the site
* Responsible for the safe work practices of 500 Brock Services employees on the Huntsman Rebuild and Shut-Down project. Worked with project manager, and two superintendents and 20 plus foremen in four trades consisting of scaffolding, insulation, painting, and maintenance trades. Provided safety tracking and developed static's relating first aid and recordable injuries. Developed plan to achieve VPP Star status for Brock at the Huntsman facility.
* Walked the property 5 – 6 times daily to insure the workers were using all required PPE properly
* Conducted oversaw the random drug screen process and transport of the employees to the screening clinic
* Acted as cooperate representative to conduct the orientation of new employees and escort terminated employees from the property

CONSULTANT
* Provided safety for those working in the field by inspecting the structure of storm damaged homes and buildings. Hurricane Rita relief for Orleans, Cameron, and Vermillion Parishes conducted 500 home inspections for asbestos containing materials. Worked in the capacity of team leader and senior inspector. Over 2,000 homes inspected between the four parishes.
* Environmental consultant working Hurricane Rita Relief, Plaquemines Parish, LA conducted asbestos, inspection and bulk sampling for 500 storm damaged homes and businesses along with hazardous material inspection and inventory.
* Conducted air monitoring for ACM crews and on the sites for electronic waste and house hold hazardous waste. Environmental consultant working Hurricane Katrina Relief, on United States Naval Bases in Gulf Port, and Pascagoula, Mississippi (Mississippi Gulf coast) with main focus on the assessment and the remediation of all storm impacted commercial and residential building on the bases as well as an off base military hotel.
* Created and provided scope of work, recommendations for remediation conducted over site, air monitoring visual clearances and conducted air sampling for air clearances.
* Environmental Health and Safety consultant working in hurricane damaged schools in St. Lucie, and Ft. Pierce, Florida. Providing remediation services for St. Lucie County School District. Provided professional opinion for the fungal extraction process and the safety of the process, and provided Safety Over Site for by and gave directives for PPE to be used in the project. Responsible for the demolition and construction of 10 schools during the remediation process.
* Supervised Safety for crews of 25 to 100 workers with multiple trades involved on the projects, and provided professional expertise in the area of duct cleaning and insulation of commercial HVAC units.
* Supervised crews on HVAC services for 4 major projects. Produced punch list form and coordinated punch list project for 35 of the 42 schools. Produced Book survey form and removal process for contaminated books at all school libraries. Helped to maintain good client relations with the school district and the vendor.

INDUSTRIAL HYGIENIST
Consulting on shut down project at Huntsman Chemical Plant Port Arthur, TX

* Monitoring Benzene, LEL, VOC, O2, H2S,
* Determining proper PPE for job tasks for confined space entry, line breaks and containment for abatement
* Monitoring NORM levels in towers and vessels on and in refining and production unit
* Asbestos Supervision and Inspection throughout the storm damaged regions of LA
* Mold Consulting in storm damaged areas of FL and MS
*
CERTIFICATIONS

* OSHA November 2008 (30-hr. course)
* Certified Asbestos Contractor Supervisor June 2006 (40-hr. course)
* Certified Asbestos Inspector December 2005 (40-hr. course)
* Certified Mold Consultant August 2005 (40-hr. course)
* Level III Security License August 2004 (40-hr. course)
* Certified Bio-Recovery Technician August 2003 (40-hr. course)
* Certified Mold Remediation July 2002 (40-hr. course)
* Certified Mold Remediation June 2001 (40-hr. course)
* Certified Defensive Driving Instructor May 1998
* Certified Parole Officer February 1998

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6401 to 6450 of 10849)

Go to Search Parameters...

Brief Description

Camp Boss

Service Engineer, Completed Aircraft Maintenance Engineering (3 Yrs)

Over three years title experience in the Barnett Shale. Experience leasing in the Barnett Shale and Fayetteville Shale. Advanced experience using ESRI GIS mapping software.

Instrument Technician with maintenance and commissioning experience

Fifteen years experience in the oil and gas industry. Five years overseas work experience in Libya and Indonesia. Experience working on onshore and offshore projects. Experience with a variety of equipment including centrifugal pumps, gas compressors, pressure vessels, piping.

Currently attending Saint Tech College and will be graduating in may.

Application for the post of Safety Officer

Safety Supervisor

Application for the Post In Engineering Department

Seeking a challenging career with in a reputed Company

This is essakkipandi, I have 6 years experiance in oil & gas industryI am working in Flour daniel India )p) Ltd,Delhi as Instrumentation Designer. I have studied Diplomo in Electrical & Electronics Engineering, Now i am lookink for Instrument designer join in USA.

More than 6.5 half years in Documentation with Oil and Gas Related Projects and have a very good expossure in Programming

Has been working for an EPC company for eight (8) years with experience in handling such projects of different magnitude both Onshore and Offshore, from grass roots to revamps, tender, FEED (Front End Engineering Design) then to engineering & procurement. Knowledgeable in INtools.

Total 9.5 years DOCUMENTATION experience including QA/QC, CERTIFICATION and PROJECT DOCUMENT CONTROL CENTER in GAS and OIL Projects with Multi National Companies.

Engg.graduate with exp.in projects at various Breweries in India

actual position: Senior well site geologist

Senior Qa/QC For Oil/Gas Projects

Qualification; B.Sc (chemistry), Skills; plant operation, precommissioning and commissioning

LP Modeling, Refinery Planning & Scheduling, PIMS, Process Simulation and Optimization

Certified PMP, with Onshore & Offshore Projects Experience with good Communication skills. Qualified Mechanical Engineer with Project Management skills & Leadership qualities.

Diploma in Chemical technology, 14 years oil field operations experience in onshore and offshore in India and State of Qatar

My working career is coverd with Petrochemical plant structural detail design and offshore jacket type platforms basic and detail design.In the field of offshore i am qualified in in-place, earthquake, dynamic, spectral and determinestic fatigue, transportation, lifting and lunch analysis.

Operating reciprocating compressors [5.3mw] and centrifugal compressors [3.5 mw], multistage centrifugal pumps, various types of dosing pumps etc. Handling various liquids such as LPG, naphtha, kerosene, gasoline and gases like refinery fuel gas, hydrogen etc.

A challenging and rewarding position as a Instrumentation Technician in the semiconductor or semiconductor equipment industry.

a team player, dynamic, can work under pressure and divers climatic condition and region, ready to learn and knowledgeable

Piping Engineer - Stress analysis specialist engineer high pressure and temperature piping. Worked with Babcock, Mitsui and presently working with UHDE.

Mechanical Engineer, with over seven years of experience in construction for Petroleum/oil/gas/power industry. I am certified associated welding inspector CAWI. QA/QC experience

My enhanced qualification & vast experience in developing motivational behaviour & team work among the personnel in the field of Industrial Security & Safety will be appropriate for your reputed organization.

Successful Project/Design Engineer experienced in cutting edge engineering technology. Outstanding record of achievement in managing projects from concept stage, to engineering design, to 1st prototype, to final product.

selling ABB Instrumentation Products Range, which includes the Installation, and commissioning.

An experienced geophysicist with a Master's degree in Exploration geophysics and a second-class upper degree (with honours) in geology with interests in field geophysical surveys, seismic processing and geophysical data interpretation.

Camp Supervisor Unit Manager English and French Teacher Sales Representative English Teacher (Sociology and Politics Departments)

With over 8 years of extensive experience in detailed piping design of oil & gas, petrochemical, refinery, onshore plants. Has the ability to do piping layout/design which include pipe support design, MTO check, generation/checking of isometric drawings (isogen)for fabrication.

I'm an apprentice trained Instrument Technician, trained by a major oil company. I have since gained a wide range of experience at technician and supervisor level in both commissioning and maintenance.

As you can see from my resume I am very familiar with engineering work through my education at the University of Pittsburgh at Johnstown and with my employment in different engineering fields after my graduation.

Seeking to advance my Mechanical Engineering career in the Oil and Gas Industry of the Houston, Texas area. I am a quick learner and detailed oriented.

Field Service Technician-National Oilwell Varco. Global installations, upgrades, maintenance, or troubleshooting of drilling equipment. I also served as a Pneudraulics Systems Specialist for the United States Air Force. I repaired and maintained numerous aircraft in adverse conditions.

Recent graduate with an MSc in Environmental Studies (Environmental Management Systems) and a BA(Hons) in European Business Studies. Extremely keen to have the opportunity of working within the any function in the oil and gas industry.

Please accept my resume for consideration.

Throughout the last five years I have gained valuable experience in both the academic and work related worlds and I am looking forward to applying my acquired skills to the position you have available.

Mechanical engineer.

Extensive experience in gas operations,vast knowledge of its systems and procedures.Considerable experience planning, putting together, maintaining and managing new facilities.Superior managerial, organizational and inter-personal skills that produce results.

Free! Experienced LNG and Gas commercial with strong analytical skills and overseas exposure

I am a first class degrees holder in BE (Mechanical) and M.Tech (Energy Systems) and I have 2.3 years experience in the field of piping design and pipe stress analysis engineering and looking for a job in a reputed concern

I want to work in your company to improve professional skills, to obtain an engineering position in a petroleum industry which will enable me to utilize my analytical and interpersonal skills. Engineer with broad experience in seismic exploration, especially in the sphere processing 2D/3D data.

Analysis and Design of various Structures Analysis and design of vessel

Early Career Petroleum Eng, with trilingual (Incl Arabic) and Dual Master's degree (Petroleum and Computer Science).

An international, multi-lingual, technically proficient Sales & Marketing professional

I wish to apply for the post of Supervisor Warehouse /Material Specialist or (Buyer) Procurement.

Position as Electro-Mechanical Designer. Open to full-time regular employment or long-term contract arrangement. Extensive experience on CADAM, CADRA and CatiaV4. Also experience with CADEX-CCD and AutoCAD 3-D Solid Modeling. Over 25 years experience.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 [ 129 ] 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out