Resume - I have 33 plus years of maritime engineering experience. Over 18 years of this i...

Misco Jobs

Resume #79186

CONTACT INFORMATION:
View contact information...

I would like to apply for a position as Chief Engineer/Maintenance Supervisor/Rig Engineer with your company. The attached resume covers my 33 plus years of offshore / oilfield / maritime experience as Maintenance Engineer and 18 years as a Chief Engineer. Should you have an opening in your organization for a person with my qualifications, or should you be anticipating one in the near future, I would very much appreciate meeting with you for a personal interview at which time we can discuss in greater detail how my experience and genuine enthusiasm for getting the job done, getting it done safe, and getting it done right will benefit your company.
I am available now.

Employment History

(OFFSHORE)

NORTHERN OFFSORE Ltd, (JET DRILLING Ltd), Singapore Position Chief Engineer Period 14/09/2008 – 10/12/2008
C/E on drill ship Energy Searcher with M/E B & W (674 V7BF – 160), 7200 BHP and Generators Caterpillar (5) D – 399, 1325 BHP. Mud pumps – Continental Emsco. Ship equipped with 3 Cranes Link Belt.

NEPTUNE MARINE OIL & GAS, Singapore
Position Chief Engineer Period 25/10/2007 – 10/09/2008
C/E on Diesel Electric (high voltage 6000V) DP2 Drill Ship Neptune Explorer with 5 Generators SACM, 17000 HP. Equipped with 4 Cranes (75, 40, 25 and 5) tons.

MAERSK CONTRACTORS, Copenhagen (Denmark)
Position Maintenance Supervisor Period 25/08/2007 – 23/09/2007
Maintenance Supervisor on Semi sub Diesel Electric Drilling Rig Kan Tan IV with 4 Generators type EMD, 7980 BHP and 2 Thrusters.

GULMAR OFFSHORE MIDDLE EAST, Sharjah (UAE)
Position Chief Engineer Period 03/05/2007 – 23/07/2007
C/E on DP2 Diesel Electric (High voltage 6120V) Cable Vessel Gulmar Badaro with 3 M/E Wartisla (11667 BHP) driving 2 Azimuth Thrusters and 2 Tunnel Thrusters. Ship equipped with 4 Cranes (40, 2 X 10 and 5)tons.

COASTLINE MARITIME, Singapore
Position Chief Engineer Period 15/11/2002 – 09/04/2007
C/E on a DP3 DSV Azteca, 6 M/Es Caterpillar (3516 & 3512) with 6 Rolls Royce Azimuth Thrusters, 17072 HP/12736 kW and 4 A/E type Caterpillar 3508 & 3412. Two Cranes Liebherr 300t & 100t. Vessel with 200 personnel onboard. Responsible for the safety and training of the local, Mexican engine crew, and preventive maintenance utilizing the ship's PM.

KUWAIT DRILLING COMPANY, Kuwait
Position Chief Engineer Period Sept 2001 – Aug 2002
C/E on Semi sub DP3 Diesel Electric Drilling Rig Oil Well E 3000 operating on Persian Gulf. M/Es Caterpillar D 3406, Detroit Diesel 8V-71.

AMARCO BRUNEI (for Global Industries), Brunei Darussalam
Position Chief Engineer Period Jan 1999 – July 2001
C/E on DSV/AHTS/Heavy Construction Vessels operating offshore Indonesia, Brunei and Malaysia. M/Es MWM-Diesel, Caterpillar & Allen from 2550 to 5665 HP. Responsible for Shipyard vessels rebuilt and maintenance service.

ESSAR OIL Ltd, India
Position Chief Engineer Period Feb 1998 – Nov 1998
C/E with Essar Oil Ltd on Deep Drilling Rig Oil Well E – 2000 working for QGPC in Dukhan Oil Field.

SUBTEC OFFSHORE Ltd, Brunei Darussalam
Position Chief Engineer Period Dec 1994 – Dec 1997
C/E on AHTS and Heavy Construction Vessels working offshore Brunei for Brunei Shell, offshore Malaysia and Thailand. M/Es: Caterpillar 2100 HP, GM/Detroit Diesel 2800 HP & Deutz 3500 HP.

(MARITIME)

PACIFIC INTERNATIONAL LINES, Singapore Second Engineer April 1994 – Dec 1994
Work as Second Engineer on Container Vessel "Kota Berani". Main Engine type MAN – 13812 HP.

LASERSTAR SHIPPING, Antwerp Second Engineer April 1993 – Sept 1993
Second Engineer on Chemical Tanker. Main Engine type MAK - 2400 HP.

PETER DOHLE, Germany Second Engineer Nov 1991 – May 1992
Second Engineer on Container Vessel. Main Engine type Sulzer – 11100 HP.

MOVBRAV SHIPPING, Cyprus Second Engineer Nov 1990 – May 1991
Worldwide trading on OBO Vessel ( Oil/Bulk/Ore ). Main Engine type Sulzer – 23000 HP.

SEATANKERS, Norway Second Engineer March 1988 – May 1990
Tankers and Heavy Lift Vessels. Main Engines type B&W Mitsui from 11000 to 13100 HP.

POLISH OCEAN LINES, Gdynia Oiler, Jr Engineer, 4th Engineer, 3rd Engineer, 2nd Engineer
June 1975 – Oct 1987
Work on cargo Vessels operating worldwide. Main Engines type from Sulzer, MAN, B&W to MAK.

Education
July 1969 - April 1975
Maritime Academy (in Szczecin – Poland), Engineering Department. Master degree with Marine Technology; 1 class Marine Engineer.

1965 – 1969
Bachelor degree with Maritime Electro – Mechanical College (in Szczecin – Poland).

Training
2008 Kongsberg Maritime Centre - Singapore Dynamic Positioning (DP) K – Pos Technical Course
2003 Rescue Training Centre Hazardous Materials
2002 Institute of Mechanical Engineer ISO Standards
1991 Maritime Academy Chief Engineer Course
1984 Maritime Academy Second Engineer Course

Skills
I have 33 plus years of maritime engineering experience. Over 18 years of this is offshore/oilfield/maritime experience as Chief Engineer, Maintenance Engineer. I have an ability to work safely and efficiently, without direct supervision, I use initiative to solve difficult problems and work well as a member of multi skilled team.
I am familiar with maintenance programs PMS TM-Master, Maximo, Netsafe, SAP, Star and AMOS.

Languages
Polish (Mother Tongue), English, Russian, Spanish.

Interests
World Current Affairs, languages. Sport (football, basketball, volleyball, swimming and athletics)
Bridge and chess.

Certifications & Achievements
Polish C/E Cert 0195806, issued 18/08/06, valid 29/07/11 no limits
Panama C/E Cert 308506, issued 26/10/06, valid 29/07/11 no limits, Endorsement 21CG607658
Singapore C/E Cert of Endorsement COE-E0039962 issued on 11/07/08, valid 29/07/11, no limits
St. Vincent and the Grenadines C/E Cert of Endorsement E/20080204/0054/HK issued 04/12/07, valid 29/07/11,
Medical Cert (STCW 78/95 Convention Reg 1/9) 3810/08 valid 30/10/09 no restriction
Offshore Medical Cert (UKOOA) 3808/08 valid 30/10/09 no restrictions
Advanced Fire Fighting Cert 15-006768-02816/01 issued 30/10/01
Personal Survival Techniques Cert 5412-006936-6287/06, valid 24/08/11
Personal Safety & Social Responsibilities Cert 5408-006936-964/07 valid 05/02/12
Proficiency in Survival Craft & Rescue Boats Cert 19-006768-03642/01 issued 02/11/01
Medical First Aid Cert 21-006768-02582/01 issued 30/10/01
Polish Seamen Book 0234392 no limits
Panama Seamen Book CT 739328 expire 29/10/11
BOSIET including EBS Cert (Incl of Safety Induction, Sea Survival, HUET with EBS, Basic Fire Fighting & Self Rescue, OPITO approved) A59 SG 08 0072 valid 07/12/10
Travel Safely by Boat (OPITO approved) Cert A64 SG 08 0077 valid until 05/12/10
Kongsberg Maritime Centre-Singapore Dynamic Positioning (DP Maintenance) K–Pos Technical Cert - 2008.

References
Available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 10917)

Go to Search Parameters...

Brief Description

Exploration, Operations, Management, Biostratigraphy, Sequence stratigraphy, Sedimentology, Basin Analysis, Clastic, Carbonate, Seismic, Geochemical, Geophysical

Job Responsibility: Quality Control laboratory which involves in testing of crude oil, produced water, produced gas, potable water & Scales using ASTM, API, APHA methods. Injection Water Quality checks for Particle count (Coulter Counter), Dissolved oxygen (Orbisphere meter), Free Chlorine, Corrosi

SENIOR E & I ENGINEER (EPC Project Management - Construction & Commissioning / QS / Contracts Administration / Procurements / Recruitment ¡V field of Electrical & Instrumentation, partly Mechanical & Civil)

Over 15 years working experience in private sectors and International Organization as Executive Secretary to expatriates, Human Resources Officer, Procurement Officer, Interpreter/Translator and Project Assistant.

I have fourteen (14) years post qualification experience: with about ten (10) years experience working on International Projects (in the Oil and Gas/Energy industry), working as a Management Consultant providing high-end business value consulting services and solutions.

Lokking for a Inspector Job

MS degrees in Management and IT, a member of Canadian Council of Information Technology Professional (CCITP) , more than 10 years of experience working as SME-EPM,Head of IS, MIS Specialist, in-depth knowledge of Project Management, BPR, Quality Management with good problem solving and people skills

I am a Maximo Implementation and Upgrading Consultant.

A total of sixteen (16) years of working experience (thirteen years were in the oil/gas and petrochemical construction projects in the Gulf Region. A computer literate and proficient in oral and written English skills. Experienced in civil, building , steel structures, fire proofing and piping works

Oil and Gas Operations Mnagement

20 years experience in drilling operations

Experience in DCS, PLC, applied to Process Industries and Power Plants. Exp/ with logic diagrams, erection and commissioning,P&ID, MCC, specifications, studies and cost estimation.

Reservoir Engineer specialized in Simulation

I have 33 plus years of maritime engineering experience. Over 18 years of this is offshore/oilfield/maritime experience as Chief Engineer, Maintenance Engineer. I have an ability to work safely and efficiently, without direct supervision, I use initiative to solve difficult problems and work well as

Thorough Knowledge of operation of Laboratory sophisticated instruments like XRF,GC,HPLC,UV Spectrophotometer, FTIR, MFR Tester, K.F titrator, Hunter Lab Colorimeter, Cast Film Extruder, Blown Film Extruder, Density Gradient Column, D.S.C, Capillary Rheometer etc.

M.E in Instrumentation Engineering with 17 years Oil & Gas Project design, Detailed Enginerring, Construction & Commissioning .

A medical doctor with long years of experienced on the rig,company ,ship,clinic and hospital seeking employment.

Over 33 years of working experience within India and abroad as electrical superor, senior electrical foreman, commissioning engineer, Elelectrical specialist.and Specialist Consultant.All the 33 years Maintenance ,Commissioning and Consultant for CMMS and Mtc Optimation Projects in oil,power Indys.

Posses degree in Geology. Familiar with Microsoft Work, Excel, Power Point, Project , Landmark Geosciences Workstation(Good), Petrel (Good), Well Kill Sheet Program(Good), Drill bit hydraulic software(very good), Mud logging software setup(good) and trouble shooting.

Chemical engineer with twenty four years of total experience in the Oil & Gas, Oil Processing and Petrochemical industries. I have rich experience in project engineering, design supervision, multi-discipline engineering co-ordination, contract management, commissioning supervision and construction

Mud engineer with 24 years of experience, on land and off shore, made all types of mud, OBM, SBM and WBM

Twenty-Seven years work experience primarily in Mechanical, Process Piping Design, Civil/GIS, CADD (Computer Aided Design Drafting) and CADD Management. Broad based as well as extensive expertise in Engineering Applications and Software Systems.

I am graduated from Algerian Petroleum Institute as an Enginer in petroleum geology (5 years graduation). I was involved in geological interpretation for prospect generation from 1995 to 2000, since then I have been focusing in geochemistry and basin modelling (1D, 2D and 3D) regional studies.

PROJECT MANAGEMENT

Quality, Health, Safety and Environment Manager - Offshore and Onshore

Free! Background and extensive experience in HES regulatory requirements through all stages of execution in major capital projects including Concept Design, FEED, Detailed Design, Construction / Fabrication and Hookup and Commissioning. Have 28 years of experience in the oil and gas industry which also i

Supply Chain and Procurement Management

Well Test Engineer

Experienced Professional Mechanical Engineer with 17 years diverse professional experience in Oil & Gas Industry - Project/Design/Operations Engineering, Rotating & Static Equipment sizing and selection, Commissioning Activities, and associated technical skills.

Instrument engineer supervisor material control supervisor

Individual expert in Surveying - Topography - Land registration - Remote sensing – GPS – Cartography - GIS agreed by the European Commission

Visual Foxpro RDBMS Programmer LAN Environment / Technician / CAD 3D Designer

I am a Civil Engineer, Internal Auditor & shortly being certified as Lead Auditor by IRCA.

Results-driven manager in diverse supply chain, purchasing and sourcing areas.

Well Integrity Specialist, Completion Production Engineer

I offer many years of experience in the Petroleum Reservoir Engineering field. I have expertise in reservoir engineering management and consulting, reservoir integrated studies, well testing/pressure transient analysis and decline curve analysis

Oil Industry exp: 28 YRS, CITGO/Consulting Downstream/Upstream/Latin America/Pricing. Objective: Pricing Manager, Business Development Manager, Head Economics Dept., Refining(Tech/Fin), E&P(Fin)Invest. Bank.

1st class Mechanical Engineer from reputed Institution, preferably specialization in Thermal Power Plant, having PG Diploma in Thermal Power Plant Engineering from National Power Training Institute, Neyveli Lignite Corporation, TamilNadu.

EEHA and Hazardous Area Expert - Seeking FIFO - Remote Area Work

Administrative and Technical support Telecom, Electrical, Electronics and Instrumentation professional with 19 years of experience in India & Abroad, fast-paced environments demanding strong organizational, technical and interpersonal skills

Engineering Graduate with 19 years of experience in Sales & Marketing, Business Development, Operations, Supply and Distribution / Logistics, P&L Management of businesses involving Lubricants / Petroleum / Coatings offering Value added Solutions in Industrial, Power, Marine Segments

15+ years of various jobs with Foxboro DCS, and Triconex IPS/FGS Systems

I am a highly skilled Mechanical Engineer with over 18 years of experience in engineering (oilfield equipment, rotating equipment, wind energy) and general technology with PhD in Mechanical Engineering.

I senior completion and workover engineer 19 yeas experience

To further enhance career growth and inter-personal skills, To share technical knowledge with other colleagues, To take the challenge of having a wider responsibilities within a new organization.

An Oil & Gas Professional with 30+ years experience in all facets of Drilling and Completion

ISO 9000:2000 QMS-03 Lead Auditor IRCA Course No.17047 and Internal Quality Auditor (IRCA No. R141), Senior QA/QC Engineer, Certified Welding Inspector (CSWIP3.1), SNT-TC1A Level 2 for RT film interpretation / UT / PT and MPI, Piping, Blasting/Painting, Structural & Pressure Vessel Inspector. Expert

Rigging & Lifting Supervisor, Health & Safety Advisor, looking for work in the construction industry, freelance contractor

I am a Petroleum Engineering Technologist with 29 yrs E&P experience, the last 12 yrs have been with major Operating Companies in positions of; Lead UBD Engineer, UBD Project Manager, UBD Advisor and Drilling Supervisor. Available for a new project 30 Novembewr 2009.

20+ years piping field - 13+ years PDS

First 1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out