Resume - Over 19 years in Oil and Gas and Petrochemical Projects involved in Mechanical C...

Misco Jobs

Resume #79336

CONTACT INFORMATION:
View contact information...

PERSONNEL DATA:
DATE OF BIRTH: AUGUST 11, 1955
NATIONALITY: UNITED STATES
MARITAL STATUS: MARRIED

PROJECT MECHANICAL COMPLETIONS ENGINEER
PRE-COMMISSIONING/COMMISSIONING MANAGER
OPERATIONS SUPERVISOR/SUPERINTENDENT
OPERATIONS TRAINER
QA/QC AND TECHNICAL WRITER

I have 29 years experience in the mechanical completions, pre-commissioning, commissioning, start-up, and operation of Oil and Gas Pipelines, offshore and onshore Oil and Gas Facilities and Petrochemical Plants including Olefins, Polyethylene, Polypropylene and Utilities with 19 years supervising personnel in all phases of topsides and plant construction, commissioning, start-up, and operations with 6 years of plant construction and maintenance.

Strong in planning and organizing projects, team oriented with excellent skills in troubleshooting and problem solving. Good communicator and trainer, people oriented, very adaptable to different cultures and operating experiences. I am an experienced classroom trainer including DCS Simulators.

Have technical writing skills for Start-up/Operating procedures, updating existing procedures, and writing PreComm/Commissioning procedures. Have QA/QC experience in field inspections with acceptance of piping, vessels, and equipment using Isometric Drawings and P&ID's. Member on several FEED, HAZOP/HAZIDs and SIMOPS meetings, attended FATs for Clients and am well versed in Certification Systems and their functions relating to Construction, Completions and Handover.

WORK EXPERIENCE:

JAN. 2008 – PRESENT – TANGGUH LNG – PAPUA, INDONESIA
* Operations/Training Specialist for Train 1 and Train 2 of the BP Tangguh LNG Project
* Training of Nationals in operation of Process and Utility Areas including DCS Simulator
* Reviewed Operating Procedures as Team Member for rewriting Process Procedures
* Writing all Process Area Safe Operating Limits for inclusion in Procedures
* Monitoring Permit to Work System to ensure compliance by Construction Group
* Assisted Project Team with documenting/planning the removal / replacement of all Alphacon Valves.

JUNE 2006 – NOV. 2007 – UJUNG PANGKAH DEVELOPMENT – INDONESIA
* Commissioning/Start-up Superintendent for Hess Gas Plant and Offshore Facilities
* Managing the Mechanical Completion and Commissioning/Start-up of Phase 1 Onshore Gas Plant, and one Offshore WHP
* Stand in for Commissioning/Start-up Plant Manager during his absence
* Training National Plant Superintendent
* Attending FATs
* Involved in FEED for Phase 2 Onshore LPG Plant and Offshore Central processing Platform and 2nd Wellhead
* HAZOPs and HAZIDs for Phase 1 and Phase 2

JAN. 2004 – JUNE 2006 – BTC PIPELINE – REPUBLIC OF GEORGIA
* Lead Commissioning Engineer for BTC Pumping Station (Oil), Gas Facility (Metering, Conditioning and Pressure Reducing) and Pipeline Block Valves
* Used BP GOC for Handover Certification
* Assurance role over Spie-Petrofac during construction, mechanical completion and commissioning
* Performed Level 2 Risk Assessments for commissioning tasks
* Managed Commissioning Team during the commissioning of the Oil and Gas systems
* Reviewed Commissioning Procedures and Method Statements for approval
* Team Leader for Minimum Scope Projects for Georgia and Turkey
* Attended FAT for Pig receiving silencer/vent

SEP. 2003 – DEC. 2003 – HELANG PLATFORM – SARAWAK, MALAYSIA
* Senior Commissioning Engineer for the topsides of Nippon's Oil and Gas Helang Platform
* Managed the commissioning team performing the commissioning
* Wrote commissioning procedures for process and utilities systems
* Developed commissioning packages for all systems for systematic commissioning and handover

FEB. 2003 – AUG. 2003 – EPC-22 PLATFORM – BAY OF CAMPECHE – MEXICO
* Pre-Commissioning, Commissioning and Operations for the start-up of Gas Compression Platforms for Pemex to allow the export of gas
* Operations assistance, after initial start-up to Pemex for the operation of 5 Booster Compressors, 3 HP Compressors, TEG Dehydration Unit, and 3 Vent Recovery Compressors.
* Commissioning/Operation of Condensate handling, Demin Water and Sour Water treatment
* Training of Pemex Operators in operations and equipment preparation for maintenance

AUG. 2002 – FEB. 2003 – MATTERHORN TLP – HOUSTON, TEXAS
* Commissioning Team Leader for the topsides of TotalFinaElf Tension Leg Platform
* Ensured TFE specs were followed by Atlantia Offshore Limited during construction and commissioning
* Used Total's Certification System for handover
* Reviewed MC, Pre-comm, and Commissioning procedures produced by GMF and WI
* Supervised Mechanical Completion of skids and interconnecting piping
* Participated in Factory Acceptance Test activities

NOV. 2001- JULY 2002 – ZADCO – ABU DHABI, UAE
* Wrote operating procedures for Offshore Oil and Gas platforms and Onshore Oil and Gas Plants
* Water Injection for offshore oil fields
* Oil/Water and Gas Separation
* Utilities for supplying de-salinated potable water, Inst./Plant air, and Power Generation
* Corrected outdated P&IDs and Updated procedures

MAR. 2001-OCT. 2001 – OPTIMAL OLEFINS – KERTEH, MALAYSIA
* Mechanical Completions Engineer for Olefins Plant using Linde Cracking Furnaces
* Piping, Instrument, and vessel inspections using P&IDs
* Monitoring of Hydrochem "Silent Blow" process for flushing HHP/HP steam
* Pre-commissioning/commissioning of "hot" and "cold" sections
* Punchlist Team Co-ordinater/Supervisor

SEP. 2000-FEB. 2001 – SHURTAN – UZBEKISTAN
* Precommissioning/commissioning Supervisor for Polyethylene Plant
* Piping, vessel, instrument inspections using P&IDs
* Pre-hydro piping inspections using Isometric Drawings

JUNE 1999-AUG. 2000 – BPC – BATAAN, PHILIPPINES
* Mechanical Completions Engineer for BP Polyethylene Plant
* Pre-hydro inspections of piping/vessels using Isometric Drawings
* Piping, Instrument, and vessel inspection and acceptance using P&IDs
* Pre-commissioning/commissioning of plant including utilities, reaction, pelleting, and off sites
* Commissioning Superintendent for start-up in utilities, reaction, and off sites
* Wrote Commissioning/Operating Procedures

JAN.1999-MAY 1999 – IBN ZAHR – AL JUBAIL, SAUDI ARABIA
* Operations Supervisor for UCC Polypropylene plant expansion
* Re-wrote existing facility operating procedures
* Operations training for expansion unit
* Trouble shooting in pelleting area of existing facility

JUNE 1998-DEC.1998 – HUNTSMAN POLYMERS – ODESSA, TEXAS
* Start-up specialist for Stamicarbon Compact Polyethylene unit
* Pre-hydro inspections of piping using Isometric Drawings
* Piping, Instrument, and vessel inspections and acceptance using P&IDs
* Operations training
* Pre-commissioning/commissioning of plant including reaction, pelleting, feed distillation, and utilities

MAR.1997-JUNE 1998 – EQUATE PETROCHEMICAL – AHMADI, KUWAIT
* Shift Supervisor for Union Carbide Polypropylene Unipol unit
* Wrote commissioning and operations procedures
* Operations training in the classroom and in the field Pre-commissioning/commissioning of plant including reaction, recovery, pelleting, and utilities

JAN.1995-OCT.1996 – POLYETHYLENE MALAYSIA – KERTEH, MALAYSIA
* Operator/Trainer for British Petroleum Polyethylene unit start-up
* Pre-commissioning/commissioning of plant including reaction, purification, catalyst, utilities, and pelleting
* Operations training on TDC-3000 and field operations
* QA/QC during construction using Isometric Drawings and P&ID's
* Area supervisor/planner for government mandated shutdown and subsequent restart
* Re-wrote operating procedures

DEC.1991-JAN.1995 – FORMOSA PLASTICS – POINT COMFORT, TEXAS
* Shift Supervisor for BASF Polypropylene plant start-up
* Controlled all activities including pre-commissioning, commissioning, operators classroom training, and start-up
* QA/QC during construction using Isometric Drawings
* Wrote pre-commissioning and commissioning procedures
* Commissioning of reaction, utilities, pelleting, and purification
* Sent to Kaushung, Taiwan to assist in sister plant start-up

JULY 1991-SEPT.1991 – TRI POLYTA INDONESIA – CILEGON, INDONESIA
* Operator for UCC Unipol Polypropylene plant
* Wrote pre-commissioning/commissioning procedures
* Wrote operating procedures
* Classroom training for operators

FEB.1986-JUNE 1991 – EVALCA – PASADENA, TEXAS
* Operator for Kuraray EVOH unit, using Yokogawa DCS
* Reaction, Distillation/Recovery, Utilities, Loading/Unloading of tank cars including "Hazardous Waste"
* Relief supervisor for Day Supervisor
* QA/QC during de-bottlenecking using P&ID's

JUNE 1981-FEB. 1986 – AMOCO PRODUCTION COMPANY – ALVIN, TEXAS
* Process Technician at Hastings Field Gas Plant
* Controlled a process involving gasoline production and oil lift using natural gas, compressors, expanders, and distillation
* Extensive experience in compressor (reciprocating) operations using Clark, Cooper, Waukesha, Ingersol Rand, and White Compressors driven by DC electric motors or natural gas

SEPT.1979-MAY 1981 – MONSANTO CHEMICAL COMPANY – ALVIN, TEXAS
* Process technician for a Sorbic Acid process
* Worked in distillation, reaction, recovery areas, and waste water treatment
* Qualified in both board jobs

UTILITY/OFF SITES WORK EXPERIENCE

My experience in Utilities and Off Sites includes inspection, pre-commissioning, commissioning, writing commissioning/operating procedures, and the operation of but not limited to:
* Fuel Gas Boilers for Steam Production
* Water Treatment Plants (Raw Water, Potable, and Demineralized) including Desalination plants using RO and Evaporation processes
* Chiller/Refrigeration Units (CFC's, Ammonia, Mixed Refrigerants and Propylene)
* Liquefied Ethylene and Butane Ship Unloading
* BOG Compressors
* Liquid Ethylene Vaporization
* Evaporative Cooling Systems
* Diesel and Natural Gas driven Generators
* Effluent Treatment using Bio Contactor system, Macerating Aerobic System, and PH control
* Sea Water Cooling Systems
* Nitrogen Generation using RO units and Instrument/Plant Air
* Ethylene, Propylene, Butene, Hydrogen, Pentane, and Hexene Purification
* Vinyl Acetate, Methanol, and Acetic Acid Loading/Unloading
* Hazardous Waste loading
* Incinerators
* Flare and Venting Systems
* Pipelines and associated systems (Block Valve Meter Stations and Check Valve Stations)

EDUCATION:
1969 – 1973 ALVIN HIGH SCHOOL
1973 – 1974 ALVIN COMMUNITY COLLEGE
1983 – 1984 ALVIN COMMUNITY COLLEGE

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8101 to 8150 of 10816)

Go to Search Parameters...

Brief Description

Senior Project Management, Profit and Loss, Project Planning, development and execution. Consultancy in the areas of safety, risk management, and techncal writing and editing. Major contract administration for a multi-national firm in Saudi Arabia on two different assignments.

PDS/piping engineer

A dynamic and energetic B.S. in Petroleum Engineering, experienced in drilling and well completions, with a solid technical background and excellent communications and organizational skills. Able to interact effectively at all company levels, from field personnel to top management.

8 Years working experience as a `Piping Draughtsman / PDMS Designer’.

I Know SmartPlant P&ID Software, 2D Auto Plant, Microstation, Acad Rel14-2004

My job basically involves mainly the operation of Microstation and PDS since I am in-charge of the 3D modeling in most projects. Also I'm involve in making civil drawings and plans using either Microstation or AutoCAD. I'm also knowledgeable in the operation Smartplant Review for checking 3D models.

Subsea, materials, administrative, operational, on shore or Off Shore.

LWD/MWD Eng. Since Jun 2000, Having Worked on both, offshore & on shore Rig

Reservoir Engineering studies, Driling, Workover, and completion aspects related to depleted reservoir / salt dome storage wells

MWD/LWD Engineer with B.Tech Degree from IIT bombay

Field Engineer / Estimator / Senior Piping Designer / Squad Lead-Checker

With excellent communication and coordination skills, I have the ability to lead a team to success and deliver projects in the given time frame. I am confident that my positive approach towards my work will benefit the organisation. My strength lies in my hardworking nature, sincerity and the willin

SAP MM Module

I'm a very hard working, and self-motivating person. I enjoy a challenging and rewarding job that utilizes my skills. I am a person who loves a challenge, and bring solutions to the table for difficult situations.

This is a history of my past employment.

Please Look closely at my Resume I am in Dire need of a job and will relocate immediately for a job.

Fresh chemical engineer with Industry experience of the best environment Proficiency in important computer software Good communication and inter-personal skills •Willing to relocate anywhere and learn new technologies

A position in a results-oriented company that seeks an ambitious and career conscious person. Highly skilled in all types of computer related work. Have all necessary oilfield tickets, BOP, H2S, First Aid, Etc.

Title search, leases, easements, damages; designed documents, databases; due diligence; review maps and plats; railroad and road permits; exp with Bureau of Indian Affairs; Supervisory. Worked in South Texas, Illinois, Wisconsin, Michigan, Minnesota, Nebraska and Oklahoma

Geology MSc graduate looking for experience in the oil industry. Principally looking for roughneck-type work leading on to more rewarding and challenging positions. Am willing to work off-shore as well as on-shore and am willing to relocate anywhere other the globe.

gas oil jobs descriptions

looking for a job in engineering field

job in geology

Account Management. Contract negotiation with clients, proposal preparation and follow up. Market analysis and account development identifying prospective customer needs and developing innovative solutions to satisfy their requirements

I would like to apply for a entry level position as an engineer in the petroleum industry.

Almost 6 years relevant experience in Instrumentation Technology. Having experience in refineries, Petrochemical Plant, Fertilizer Plant & Oil & Gas Plant.

Seeking for an entry level position.

I'm a qualified Aircraft Autopilot maintenance engineer, seeking a challenge in the oil industry. I would like to challenge myself, working with all electronic and related fields.

Well versed in P3e, P3 and MS Projects with very good knowledge of spread sheets and MS Access database. Have experience of Petrochemical, Oil & Gas and Chemical Projects. Have also seccessfully executed few projects as Project Manager.

Highlights of Qualifications: Diploma in Electrical Engineering from Maharaja Sayajirao University of Baroda, Gujarat, India. Registered license holder of Industrial Electrician from Ministry of Training colleges and University, Ontario, Canada (Licenced 442A), Applied for C.E.T. certification to OC

Scaffolding & Safety

Ten years with major Oil and Gas company; managing,planning ,tracking drilling and completion operations up to 100MM$ AFE. High expertise in Contractual Strategies (Incentived Contracts, Risk reward) Areas of experience are worldwide Off Shore and On Shore.

To join a competent and reputed organization and exhibit talent to be promonent as an excellent professional engineer

Oil Field Inspection Specialist (30 year career), experienced in all aspects of plant equipment inspection: Pressure Vessels, Gas fired and Waste Heaters, Tankage, Piping, Pipeline, PSVs, Offshore Platform structures & Cranes. Skilled in Risk Based Inspection & Equipment Strategy procedures.

To acquire a technical/management position where engineering experience and managerial skills will significantly contribute to use the skills obtained through my experience and qualifications to benefit my employer and grow my self with organization.

Geologist with 6 yrs of experience looking to obtain an exploration geologist position utilizing oil & gas exploration, drilling, and production experience along with conventional deep reservoir testing, geological mapping, stratigraphic analysis and computer analysis to optimize production.

MSc in Materials Engineering / BEng in Electronci & Communications Engineering

Instrument Technician with 19 years experience, trade and some college. Computer literate. Can do any of maintenance, planning, construction, installation, supervision, pre-commissioning, QC, calibration, documentation, faultfinding, wiring, loop checks, and more.

There are three distinct areas to my trade & training in the R.A.F, Mechanical, electrical and corosion fault finding.

Well-rounded professional office/field experience in project controls, process engineering, environmental engineering, construction, management, sales, and business consulting. Industries: oil and gas, federal government contracting, residential construction.

Former Australia SF; SAS Regt. 19 yrs int'l experience, 3 yrs Regional Manager China & Sth EA. Strategic planner drawing on yrs in difficult & demanding environments.

Sr. Project Controls Planner/Scheduler

·Languages: Advanced Levels in Arabic, English and French (written and spoken)· Computer Literate: Advanced Levels in MS Word, MS Excel, MS PowerPoint, Internet, Fortran, Pascal, AutoCAD· Technical competency, design experience, communication skills, & problem-solving abilities

Total Experience of Eighteen, encompassing as a professional experience in Project engineering for Major Construction Projects in the Middle East & India.

To find a position where I can improve my pick, packing, Inwards goods, Despatch skills and operate as an effective team member to bring Success to myself and my team.

Oilfield Electronics/Instrumentation technician; excellent troubleshooting skills, analytical, hardworking, willing to learn new skills.

Over 19 years in Oil and Gas and Petrochemical Projects involved in Mechanical Completions, Pre-commissioning, Commissioning, Operating and Training. I have good experience in Gas Treatment and also have good Offshore experience.

Heavy Lift / Rigging Superintendent, Rigging Engineer, Rigging Supervisor

Work well with others, Willing to become a leader, Able run Electrical Tools

A degree holder in Mechanical Engineering from University of Malaya,Kuala Lumpur.Have been involved in the construction & operation of power plant almost 1.5 years.Have ASNT Level 2 Qualification in PT & MPT and PCN Level 2 in RI & UT

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 [ 163 ] 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out