Resume - 11+ years of experience in Procurement, Materials, Inspection & Expediting posit...

Misco Jobs

Resume #79400

CONTACT INFORMATION:
View contact information...

Education:
1 First class Bachelor degree in Mechanical Engineering

Objective:
Has 11+ years of experience in Procurement, Materials, Inspection & Expediting positions in major projects like Crude processing facilities (CPF) & Gas Oil Separation Plant (GOSP), Transit Lines, Cross-country pipelines, Well head, onshore platforms & Heavy fabrications. Competent to communicate & accepts responsibility as an individual and also as team member with analytical and logical skills in India and abroad.
------------
Highlights:
1 Knowledge of International codes ASTM, ANSI, SSPC, ASNT, ASME, API and AWS
2 Efficient in Expediting of Materials, follow up shipment dates, update PM+
(Project Management)
3 Experienced in Spare Parts Data Package (SPDP) for Saudi Aramco.
4 Veteran about the cataloging & standardization requirements for Mechanical & Piping Equipments.
5 Expert in Documentation Follow up & reviewing the requirements as per Client.
6 Aptness in Raw Material, Dimension, Welding and Stage Inspection as per spec / Drawings.
7 Efficient to Inspect Well Head / Onshore platforms/Cross-Country Pipe line / flow line viz. Welding / Stringing/ Road Crossing/Holiday /Pigging & Hydro test.
8 Expertise in Inspection of Structural/Pressure parts/Auto bodies & Sheet Metal.
9 Preparation of Inspection & Test Plans of all related works as per the scope and applicable codes, standards specification and relevant codes.
10 Lead and guide QA/QC inspection team to perform technical inspection of on going works to insure and achieve required quality.
11 Expertise in Inspection of Blasting, Surface-Preparation, WFT, DFT & Wrapping of U/G pipes 2 / 3 layers as per International Standards SA2, SA2.5, SA3.0 or SSPC -SP6, SP7, SP10 or as per NACE
12 Good knowledge in Material Inspection & Procurement of Pipes/Valves/Pipe Fittings & other miscellaneous items related to project
13 Knowledge of Vecto Gray / Marrat / Brieda Energia Wells & Well head Fabrications
14 Amenable to communicate local / internationally & to draft routine correspondence with the client, supplier, manufacturers, shipping agents & Third Party Inspection Agencies.
15 Sufficient knowledge in Letter of Credit, Bank Guarantee, Purchase Orders & Logistics activities.
Achievements & Awards:
1 As a Material / Inspection Engineer for MECC, Kuwait saved company with a profit of US$100,000.00 while procuring materials (pipes) with the effective documentation.
2 Approved as Inspection Engineer by Kuwait Oil Company for Constructions of Flow Line & Associated works Project in South, East and West Areas.
3 Approved as Inspection Engineer by Kuwait Oil Company for Material & Warehouse Team
4 Approved as QC Engineer by Doha East Power Station (Ministry of Electricity & Water –Kuwait) for Mechanical Maintenance Department.

Job Profile: (Current Employer)
Aug'07 -till date
Project Expeditor
SNC Lavalin Europe BV, Al Khobar Saudi Arabia
SNC-Lavalin ranks No 1 Engineering Company in World. Canadian Company works 140 countries. The SNC-Lavalin Group is the largest Canadian engineering construction firm and one of the biggest in the world. It provides engineering, procurement, project management and project financing services in the industrial, transport, power, infrastructure and buildings, telecommunications, environment and defense sectors.
Project -Shaybah Central Processing facilities (CPF) for Saudi Aramco
GOSP -4 (Gas Oil Separation Unit)
Nature of My Job
I joined SNC as SPDP Coordinator but presently working as Project Expeditor reports to Mgr Procurement. communicate with Vendors / Suppliers for NMR's, RFI's, follow up for deliveries, Update in Project Management (PM+) systems, check with MSR / Over Short & Damage (OSD) reports, Coordinate with TPI / Logistics for shipments. Updates & Monitor shipments, MSR, MRR, OSD report, maintain progress report. Create MSR & Ship Alerts to all Expeditors, Visit Vendor & sub vendor facilities & follow up with Mfr / Prod schedules. Expedite drawings, data sheets, P& ID's, all Documents for Engg till the data books get approved by client.
-------------------------------------------------------------------------------------------------------
Sep'05-May'07
Inspection Engineer Materials (Secondmant to KOC)
M/s Heavy Engineering Industries & Shipbuilding Co. (HEISCO) (www.heisco.com )
Kuwait
HEISCO is one of the major EPC companies in Kuwait with a diversified range of business in Oil and Gas, Petrochemicals, Power, Pressure Equipment Manufacture, Shipbuilding and Repair, Maintenance and other industrial services including Heavy Engineering works. Presently technical manpower are secondmanded to Kuwait Coastal Guard vessels, Kuwait Oil Company & Kuwait National Petrochemical Company.
Project -General Inspection Services- Kuwait Oil Company
Nature of My Job
I joined in HEISCO by Sep'05 as Inspection Engineer, reporting to Snr Engineer (Tech & support Services, KOC). Responsible to inspect all items not moved over 10 years & above.
Responsibilities includes with inspection, examination, evaluation, judgment & submittals
My job starts with Materials Inspection which might be Spares for Equipment, Pipes, Valves, Rods, Pipe Fittings, Electrical, Chemical & Tools.
Approximately 51,000 items related to oil & gas, equipment spares were inspected by a team of 7 Nos. I should cross check the specification detailed in MMMS (Material Management Maintenance System), Catalog ID (Cat ID's) & Vocabs verifications.
Despite I should do Physical, Visual, Dimensional Inspection & Verification carried out with reference to long description. Also based on the observation, Comments, Recommendations about the material usability or to write off & should review with user & manufacturers recommendations.
Dec'02-May'05
Material / Inspection Engineer
M/s Mechanical Engineering Contracting Co. W.L. L. (MECC)
Kuwait ( www.aas.com.kw )
MECC is the mechanical division of Ali Alghanim & Sons Trading & Contracting Co. Ali Alghanim & Sons Trading & Contracting Co is the main distributor for BMW, Rover &
Rolls -Royce Cars & diversified with different divisions viz. MECC, SAI Trading & Contracting, Alghanim-Wormald, Dewaring, Telecommunications & Equipment divisions. MECC is one of the approved contractors for KNPC, KOC & Equate. MECC operates upstream & downstream projects in oil & gas sectors. Completed over 1400kms of U/G constructions & more than 30m KD (~100m$) projects on hand.
Project: Construction of Flow lines of South, East & West Kuwait.
Nature of my Job
I joined MECC by 22nd Dec for the project Construction of Flow lines in South, East & West Kuwait for Kuwait Oil Company. I had been assigned as Material cum Inspection Engineer. I should report to Contract Managing Engineer & General Manager. I am the only person responsible for full Procurement of materials & Inspection of pipelines (Flowlines / Cross-country lines), Documents Submittals, Follow-up, Approvals / Procurement as per contractual Specification & Material Standards. Preparing & review of Inspection & Test plan shop floor & at field. Analysis the need / quality of the material to suit the project requirement & Review the technical submittals of all materials viz Pipes (Seamless, ERW), Valves (Plug, Gate, Check, Globe, SSV, PRV ),Pipe fittings,(Flanges, HSS, Elbow,.....) & etc. Review Tenders / Contracts / Quotations & Inquiry related to procurement

In addition to that I should Review the Inspection report from TPI & the reports of NDE
and check with the customer Quality Plan. Streamline the arrival of material as per company's requirement & Cash flow. Material Planning as per project and placing orders complied with client requirements (with means of Letter of Credit / Bank Guarantee)
Maintain Weekly / Monthly Inventory reports to management and Client. Responsible for material follow-up and correspondence with client, supplier & TPI. Attending regular Progress & Financial meeting with client about the material management & the material arrival. MTC review, TPI reports review, Visual Inspection of Materials, Welding, NDT, Blasting, Heat Shrink Sleeves, Wrapping, Holiday, Back filling, Pigging & Hydro testing. Responsible to regular audit the inventory in site stores & workshop stores. LT/PT & RT examinations & Visual Inspection of Well head spools. Conducting WPS / PQR requirement for the project. Review the deviation recommendation from the manufacturer & get approval from client.

Aug' 00–Dec'02
Engineer
M/s Ambica Industries, Trichy.
India
Ambica is one of the leading Heavy Fabricator for Bharat Heavy Electricals Ltd, Engineers India Ltd, and Tata Projects Ltd & National Thermal Power Corporations. Ambica is the best fabrication company for Ceiling Girders, Columns & Tanks for various projects.
Project: Heavy Fabrications for M/s Indian Oil Corporation Ltd,
Bharat Petro Chemicals Ltd & Reliance India Ltd (Hazira)
Nature of My Job
I joined Ambica as Engineer QA/QC department however my job not only restricted to QA/QC also involved in Procurement sections. I should report to Works Manager and my job related to Material Procurement & Inspection for Pressure Vessels, Ceiling Girders & Tanks. And I will do In progress inspection & Final Inspection, Review the Quotations from suppliers & check with tendering department before procurement. I should support Purchase department in procurement for project & prepare Procurement plan based on requirement and with cash flow availability.
Alternatively my daily duties includes routine correspondence with client, supplier or with TPI. Prepare Procurement status report, store stock report to the Management. Also I should coordinate with Inspection agency, shipping agents & transport agencies.
Over to that I done Overall Visual Inspection, Dimension, Fit Up, BG, Fillet size, Manual,
Auto Weld Inspection, Diagonal, Water Level, Twist, straightness, Flatness, Stamping,
Punching of level, Erection Joint, Site Weld, Bend, Reaming holes, Blue matching for Trial
Assembly of Monorail beams, Column, Ceiling Girders, Pre/Post Weld Heat Treatment-
Stress Relieving, NDE (MT/PT/RT)-Blasting & Coating
Nov'98 - Jul' 00
Inspection Engineer
M/s Arabian Metal Product Organization, Jubail. (AMP0)
Kingdom of Saudi Arabia. (www.ampo.com.sa)
AMPO is the specialist Company in Structural fabrications to SARAMCO & SABIC Groups. AMPO has the capacity to do 8000 tons of fabrications per annum. AMPO fabrication are Structural & Heavy Engineering Fabrication like Beams, Columns, Stairs, Handrails and all related to Petro Chemicals, Refinery & Steel Plant. Saudi based company run by British Mangers AMPO had been one of the big heavy fabrication company worked with various client M/s Eastern Petrochemical Co, M/s Arabian Mitsubishi Const. Ltd, M/s Saudi Voest Alpine Ltd., Mitsubishi Heavy Industries & with various projects.

Project: M/s. SHARQ de Bottlenecking Project,
M/s Al-Razi Methanol Ltd
M/s HADEED [Saudi Iron and Steel Co.]
Nature of my job
I enrolled AMPO by Nov 98 as QC inspector and promoted to Inspection Engineer. My job
Comprises three stages (1) RML stage: where I should inspect Raw Material-MTC
review, Visual Inspn & Documents review Inward Material, inspection should be as per
Purchase order / Material Specifications. Stage 2) in process Inspection: where I should inspect welding, NDE/Surface Profile, GRIT-Blasting, Coating Inspection viz. Wet & Dry
Film thickness Stage 3) Final & Dispatching: Co-ordination with TPI for final inspection
May'98- Oct'98
Engineer Trainee
M/s Sree Athreya Enterprises, (SAE), Trichy.
India
SAE is the one of the Heavy Fabrication for a range of clients & for range of Inspection agencies viz Bharat Heavy Electricals Ltd & National Thermal Power Corporations, Mettur Thermal Power Corporations, Lloyds Register of Quality Assurance & Indian Boiler Regulation. SAE is professional in Ceiling Girders, Headers, Ducts, Columns & Tanks for various projects.
Project: KAPARKADA Boiler & M/s Indian Oil Corporation (IOCL)
Nature of My Job
I coupled SAE by Nov 98 as situation vacant post my job purely related to QA/QC activities and I should report to Senior Engr QA/QC department. My job involves a variety of items at diverse stages of inspection. To elucidate some Structural, Pressure Vessel & Heavy
Engineering Fabrication, Tanks, Headers, Girders, Beams, Columns and all related to
Power plants & Refineries. Daily I will have Material Inward inspection of Plates, Dish end pipes, tubes, Marking, Cutting, Visual Inspection, & vessels. Review Customer Quality plan,
SQP, ITP. Preparation of QA/QC procedures, WPS & PQR, dimensional report, RT report,
Welding log book & report.
May'97- Apr'98
Assistant Engineer
M/s TECH FAB, Trichy
India
TECH FAB is a medium size company, one of approved fabricators in Bharat Heavy Electrical Ltd. However the growth of TECH FAB is quite well in fabrications & Erection activities. TECH FAB is getting projects from Trichy & Ranipet Bharat Heavy Electrical Ltd

Project: Faridabad Boiler-500 MW
Nature of My Job
I started TECH FAB as Asst Engr I enjoyed the knowledge gained from TECH FAB, My job starts with Inward Inspection –Documentation & Review of MTC & TC, Material inspection like pipes, sleeves, blades & all miscellaneous items related to Power plant & refinery. Review of Standard Quality plan & Customer Inspection Procedures. Also I should do Shearing,
Rolling, Bending, Dimensional Inspection. Mostly light Structural, Pressure Vessel parts &
Heavy Engineering Fabrication of Girders, Beams, Columns and Frames all related to
Power plants & Refinery. In addition to that I should follow Sub contractor's activities final inspection viz Surface Profile-Sand Blasting/Coating-Packing-QA/QC Reports.

CERTIFICATION:
1 American Welding Society Certified Associate Welding Inspector
2 Attend Lead Auditor Course in QMS by Bureau Veritas.
3 Level II Certified by American Society of Non Destructive Testing [LT/PT, MT, RT]

Other Training Skills
1 AutoCAD Certification by Autodesk Inc USA.
2 C, C++ and UNIX Certification by ECIL-BDPS.
3 E-Com course by JMC a premier institute in Computer Science, Trichy.
4 Java Pro course certified by Radiant Software Ltd.------------

ADDITIONAL INFORMATION:
Software / Personal Profile:
Spread sheet: MS Word, and Ms-Excel & Power Point
Applications: Material Maintenance & Management Systems( MMMS)
Age and Date of Birth: 32 years & 19/04/76
Marital status: Married
Nationality: Indian

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5901 to 5950 of 10917)

Go to Search Parameters...

Brief Description

significant experience as Production operator in Oil & Gas Production and Processing industries around FOUR years experience.  Reviews unit operation data(shift supervisor /engineer log ,etc)and analyses this data to determine potential problems and ensure that unit operatio

Experinced in process activities as well as technical service dept.Handling production of oil manufacturing such as metalworking fluids,wax,grease etc.,giving support to serivce engineers if any required.

More than 10 years experience in the petroleum, petrochemical, power, chemical weapons demolition, sheet metal and bridge manufacturing with quality assurance and quality control functions with current qualification as AWS CWI and API 510. Included is new construction, unit turnarounds, vender surve

Diploma in PETRO CHEMICAL TECHNOLOGY

QA/QC, NDT INSPECTION, CONSTRUCTION QA/QC & CERTIFIED LEAD AUDITOR

Project Engineer Subsea (Oil & Gas)

I am a science graduate Mumbai University, India. I am in Instrumentation field form last 10yrs. I had an excellent opportunity to work on different types of field instruments, On-line Gas chromatographs (PGC), different types of analysers, D.C.S., E.S.D. andPLC.

I have an excellent amount of experience in the Personnel/HR management 12 years (1996 – present). My current position is HUMAN RESOURCES MANAGER /ADVISOR, Abu Dhabi.

seven years of experience in process engineering support, basic and detailed engineering, commissioning, and plant operation of gas sweetening (using specialty solvent, MDEA), dehydration of the sweetened gas, polyethylene terephthalate production and wastewater treatment units

Experienced mud engineer

Experienced gas Pipline Engineer and Strong background in Petroleum Engineer

Senior instrument technician

A system engineer with more than ten years experience in process control and oil field development and implementation.

Key Qualities 10 years experience in plant design and piping lay-out. 4 years experience in using Intergraph’s PDS 3D system. Experienced in Auto Cad, Microstation, Autoplant 3D Finished PDMS training course, Modules 1 and 2

Field: Technical Services (Petroleum Fuels) Experience: 10 years (6 years in Petroleum Sector)

I have been associated for the past 10 years with Fertilizer & Petrochemical Industry. I have worked as a Senior Metallurgical Engineer with specialization in the field of welding technology, non-destructive inspection techniques & product analysis and its development.

I have worked for over 10 years for Schlumberger Oilfield Services. My career with Schlumberger has involved mostly hard rock stimulation, some coal bed methane stimulation, coiled tubing and cementing. I have been involved in the design, execution and management of these areas.

Experienced (~10 years) specialist in electronics and IT / former army officer. Languages: German, English, Basics in French and Spain Skills: PLC, instrumentation, electronics, computers

Onshore pipeline(above ground/ buried)and Plant piping engineering and design. Stress analysis-using CAESAR-II, for static, dynamic, wind, earthquake, flange leakage, Slug, and Water Hammer analysis. Familiar with concerned codes viz.ASME,API,WRC,etc.

PRESENTLY WORKING AS VICE PRESIDENT - TECHNICAL WITH M/S.AEGIS LOGISTICS LTD.MUMBAI,INDIA

My present Job as well as the work I did for Santa Rosa w/ the Syzemograph will be what pertains to the oil & gas Industry

Work Experience of 7 years - presently working with GE Capital Intl Services in India (From past 5 years). Presently working as Asst Manager

static equipment, storage tanks, API650, pressure vessels, ASME, fluent English, good German, MSc, Bsc, petrochemical, oil

I am responsible for all instrumentation, maintenance modification, and repairs for plant machinery and furnace maintenance. I have strong supervisory experience in a petrochemical plant. My experience also includes extensive electrical/HVAC knowledge.

A Professional and Versatile QA/QC and Inspection Engineer with 10 years effective hands on experience in QA/QC ,NDT and Welding inspection,

Production Geologist - Onshore Texas and Mid-Continent. Strong background in operations, log analysis and correlation, seismic interpretation and computer mapping, prospect evaluation, and well planning. Extensive background in fractured carbonates and horizontal drilling operations.

Graduate Mechanical Engineer with I firm foundation in power generation, mechanical-thermal design, solid modelling, heat transfer, CFD, thermodynamics, project management and manufacturing experience.

Position as Contracts Administrator using 10 years of experience as oil and gas industry contract consultant and contract compliance auditor.

DRILLING ENGINEER: Experience in drilling design engineering in horizontal, directional and verticals wells. Specialist in horizontal drilling, SAGD well drilling projects, trajectory well design, casing design, bit selection and drilling softwares. experience in drilling project planning.

A self confident, motivated and energetic person, able to cope with rapid change in corporate culture, strong technical analysis, management and computer skill, able to work under pressure, willing to learn.

Seven years experience.

Russian speaking geologist with an MBA in finance seeking position with an international oil and gas exploration company in corporate planning, project management or finance.

I am an international business transaction professional, with five years experience specializing in the rail transportation and oil industries. I am currently an MBA student specializing in international business.

As an active electrical designer within radar, sonar and instrumentation for ten years, Fabian has a unique experience with respect to product design and manufacturing efforts. His work within an ISO9000 system has produced solid craftsmanship, with due to diligence to Quality Control.

Engineer, 10 Years experienced, Construction management of industrial projects

I have Worked has Process Control Room & Field Operator in Indian Organic Chemicals Limited, Chennai, India for 14 years and has Control Room and Field Operator Oman Chemical Industries Limited (S.A.O.G), Oman for 2 years

Over 15 years experience of Project Management and Specialist Engineering on numerous project task forces in the oil refining and gas processing industry.

More than 15 years of Oilfield experience and Drilling Services with Schlumberger. worked in many countries in different positions starting from Engineer Trainee to Staff Engineer, Rig Manager, Operations Manager and now (SDS) QHSE Manager worldwide.

I have over 10 years of experience as a Rotating Machinery / Reliability Engineer in various industries. I am looking for a full time or contract position overseas as a rotating machinery engineer.

Fully experienced manager/agent within the water/utilities industry

Excellent Safety Record. Excellent Communication Skills. Exemplary Drilling Record. Over 16 years of supervisory experience of oilfield personnel & operations.

as incharge operator at catalyst production unit and process operator at the ammonia plant Experience in units- : kneaders,extruders calciners,heaters,Turbines, Centrifugal compressors, Boilers, Super heaters, Reformers, MEA& HPC Systems

Eighteen years Electrical experience in the Offshore, Petrochemical, Power Generation, and Natural Gas Processing industries. Project Manager, Hook-Up & Commissioning, Supervisor of E & I Design staff and E & I contractors on projects. Budgeting and Procurement experience.

11+ years of experience in Procurement, Materials, Inspection & Expediting positions

Management of QA (Quality Assurance), Planning, Scheduling & Project Control

Chemical Engineer, Drilling Fluids Engineer, Process Engineer

Procurement specialist with supply chain experience. I am versatile, bilingual(spanish),proven difference maker and leader.

Cost/Budget Controls Manager

Proficient in Integraph Plant Design System (3D PDS) and its software including Piping Designer, Equipment Modeling, Microstation, AutoCAD, SPR (Smart Plant Review), Batch Manager, Isometric Extraction and knowledge in Microsoft Windows.

I have completed my diploma & degree. I have completed my NDT ASNT Level 2, I have more than 5 years experienced in the field of NDT technician.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 [ 119 ] 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out