Resume - Over 18 years Oil and Gas experience and have been involved at all levels of con...

Misco Jobs

Resume #79566

CONTACT INFORMATION:
View contact information...

CAREER SUMMARY
Over 18 years Oil and Gas experience, I have been involved at all levels of conceptual, Front End Engineering, Detailed Design and operational support.

QUALIFICATIONS
* B.Sc. in Chemical Engineering, Gas Industries (1988) Sharif University of Technology, Tehran, Iran
* Master of Science, Industrial Engineering (1997) Amir Kabir University of Technology (Tehran Polytechnics University), Tehran, Iran

WORK HISTORY

Sr. Process Specialist
2008 - Present, Tri Ocean Engineering Ltd., Calgary, Alberta
Project Name

* Process lead involved in BP Alaska CHOB Phase II project. Development of PFD and P&ID¡¦s. Equipment and line sizing for sand laden system. Flow assurance study and erosion rate calculation.
* Process lead involved in Shell Cliffdale Infrastructure upgrade project (EPC project). Condensate, Casing Vent Gas and Emulsion piping modeling/sizing using Pipe flow software, Development of PFD and P&ID¡¦s. Compressor and Dehydration system sizing. Equipment adequacy checking.
* Process lead involved in Water Handling Project (EPC project). Development of PFD and P&ID¡¦s. Equipment and line sizing, Process control design, Process modeling using HYSYS, PSV's and safeguarding system design using Flarenet and in-house software. Participate in Hazop, Bow-Tie and SIL studies
* Process lead involved in Area 100 Reconfiguration project. Checking the PFD's and P&ID¡¦s. Participate in Hazop and IPF studies.
* Process lead involved in brine disposal injection project (EPC project). Pump adequacy checking and pipeline hydraulic and safeguarding checking.
* Process lead involved in Panther Compressor project and other small project to technical support, Data sheet checking, P&ID's checking and reviewing the safeguarding system.
* Process lead involved in Shell Peace River Carmon Creek project. Development of PFD and P&ID¡¦s. Equipment and line sizing, Process control review, Process modeling checking using HYSYS.

Sr. Process Specialist
2006 - 2008, WorleyParsonsMEG, Calgary, Canada
* Senior Process Specialist Worked on North America SAGD project (EPC project), involved on water treatment, preparing data sheet, safety valves calculations and water lift pumps sizing. Worked on MEG Energy SAGD-Solvent study, involved in adequacy check on Phase I equipments and facilities. Worked on Plant 92 Evaporator vent Collection project, completed detail design. Involved in Simulation using Hysys ver. 2004.1, PFD, P&IDS, UFDS & demolishing drawings development, Hydraulic studies, heat and mass balance using "HYSYS", Capacity check on Aerial coolers and separators, Sizing of relief valves using WorleyParsons internal spreadsheet, Pump and Aerial cooler adequacy check and turn down studies, PSV discharge line and header sizing using Flarenet ver. 2004.1, Closing Hazop action Items, preparing line and Piping Tie-Ins Control lists, completing Process Data Sheets, Updating Cause and effect charts. Writing control philosophy for this project. Involved in the preparation of inputs and documents for steam injection project / tender.
Senior Concept / Process Engineer
2003 - 2006,: PDO-Shell, Muscat, Oman
* Senior Process Engineer worked on Thyfut Heavy oil steam project, responsible for preparing Concept Selection Report. Worked on Lekhwair LP flare system and adequacy check using Flarenet software. Lekhwair C7 characterization using Hysys software. Involved in Preparing Asset Development Plans (ADP) to document the concept selection in support of the existing facilities in Sadad, Sayyala, Suwaihat and Zauliyah production stations. Review process disciplines deliverables from project teams during FED/DD stages. Participate in HAZOP and IPF studies. Worked on program build 2005 and 2006 and cost estimates. Adequacy checks on Zauliyah, Anzauz and Sayyala water injection systems. Working on Suwaihat dehydration tank using Shell dehydration manual and Mukhaizna crude oil transferring system. Analysis of equipment and piping systems and review PEFS and PEEFS during FED/DD phases. Make technical recommendation on existing equipment such as CPI separator. Hydraulic studies on various fields and process De-bottlenecking.
Maintenance Manager
2003 - 2003, PetroIran Development Company (PEDCO), Tehran, Iran
* Maintenance manager working on Salman Project. Working on maintenance package. The maintenance package is part of Salman Development project in IRAN. the responsibilities are included the improvement of centrifugal compressor surge control system of five parallel gas compression trains and internal modification of suction and discharge scrubbers and improvement of existing gas dehydration system.
Senior Process / Project Engineer
2002 - 2003, BP/IOC, Tehran/Aberdeen, Iran/UK
* Senior Process/project Engineer working on Rhum gas/condensate field. Working on FEED verification in IOC office in Tehran. The responsibilities are included the verification of Flow Assurance Report and Performing the economical studies using PIPESYM and in-house Economic Evaluation Model. The project is to produce 300 MMscfd of gas from Rhum Gas/Condensate field. This field is located in Northern North Sea, Block 3/29a, about $420 million project.
Senior Process Engineer
2002 - 2002, Worley Ltd., Qatar Company
* Senior Process Engineer working on khuff Wellhead Treatment plant facilities project. Working on FEED verification and detail design in Worley Engineering office in Qatar. Responsibilities had included the simulation of Natco and BS&B typical plants, carrying out a complete heat and mass balance using HYSYS. Sizied the required indirect water bath type inline heaters for seven Natco and Bs&B plants. Hydrualic studies for the new inlet and outlet lines of inline heaters. Generating cause and effect charts for the inline heaters. Calculating the required methanol injection for hydrate formation prevention during the cold start up. Reviewed PFD & P&IDS. Preparing line list and Data Sheets for Heaters.
Senior Process / Project Engineer
2001 - 2002, IOC - BP Amoco, Aberdeen, England
* Senior Process/project Engineer working on Rhum gas/condensate field. Working on various development scenarios in BP office. During the Pre-Feed/Concept selection phase responsibilities had included the simulation of the complete system, carrying out a complete heat and mass balance using ¡* HYSYS¡¨. Infield and main gas lines sizing using ¡* PIPESYM¡¨, Developed PFDS utilized ¡* HYSYS¡¨ to estimate hydrocarbon inventory, investigated hydrate formation points, feasibility studies on using TEG, MEG, Methanol hydrate inhibitor injections and injection requirements. Sized chemical pumps, and injection lines. Performing the economical studies and cost compares using ¡* QUESTOR¡¨ and in-house Economic Evaluation Model.

Senior Process / Project Engineer
2000 - 2001, PETROPARS (UK, Ltd)/SAMSUNG IOC, Tehran, Iran/Malaysia
* Process Engineer working on South Pars phase I offshore Gas field, Working on Detailed Design offshore at Technip office in Kuala Lumpur, Malaysia. Responsibilities included the review of vendor documents/ drawing for package items, co-ordination with other related engineering groups (piping / Mechanical / Instrumentation), Capacity and sizing Check on the dehydration package and separation system using Shell Design and Engineering Standards, reviewed PFD & P&IDS, dehydration vessels and all in-line instrument data sheets. Checked the requirement and sizing of relief valves. The Project is to produce 1 Bscfd of gas from South Pars Phase I, Separation, offshore Dehydration, and directing the treated gas onshore for further processing.

Project Leader
1997 - 2000, NIOC/Total Fina Elf, Tehran/Paris - Iran/France
* Working on FEED and Involved in preparation of inputs, review design, process and facilities optimisation in Dorood offshore/onshore Buy-Back project. Other Responsibilities in this project included reviewing PFD and P&IDS during FEED phase, Capacity check on the compression system using Ea (Engineering Aid, Process Simulator), review of vendor documents/ drawing for package items and make recommendation on the fuel gas system in ELF office, Paris, FRANCE. The project is throughput enhancement from 170000 bbl/d to 220000 bbl/d of oil by using gas/water injection into reservoir. $850 million project.
* Working on FEED. Reviewed PFD & P&ID & UFDS using API 14C and make recommendation on separation system, waste water system and also reviewed the FEED documents in BALAL Buy-Back project.
* The project is to produce 40000 BPD of oil from Balal field, offshore separation, and directing the crude oil onshore for further processing. The value of this project is about $300 million.
* Involved in preparation of scope of work for relocation of two main flares (Petro Chemical Co. -N.I.O.C. -OFFSHORE project) using API 521.

Senior Process Engineer
1995 - 1997, NIOC/IOOC, Tehran, Iran
* Senior process Engineer involved in process simulation (ProII ver. 3.1) to optimise the performance of the stabiliser column using a combination of hot and cold stripping system, this study focused on efficiency improvement of the stabiliser and carrying out a complete heat and mass balance using PROII.
* Involved in preparation of sweetening and dehydration technical specification for power plant in Kharq Island, Iran.
* Involved in preparation of scope of work on Resalat Offshore project.
* Working on the feasibility design, responsibilities included preliminary study on renovation and reconstruction processes on Nowrooz field, IRAN.
* Involved in PFD & P&IDS reviewing and co-operation in Sirri-Total project (Iran - France project in Sirri field).
* Involved in provision of software program on Salman gas supply (Gas lift optimisation).
* Involved in process design of onshore oil pipelines including simulation/optimisation of flow schemes, generation of heat and material balance between wellheads and relevant plant in Dorood field using PipePhase Simulator.

Process Engineer
1993 - 1995, NIOC/IOOC, Tehran, Iran
* Engineer involved in execution of design studies on pipelines (two phase study) for Dorood (onshore plant in Kharq Island) plants.
* Involved in sizing of high pressure gas pipe lines and ordering of chokes and orifices for installation on three well head platforms in Salman offshore field.
* Involved in improvement studies for FX platform (one of the production platforms in southern part of Iran) sea facilities and installations.
* Involved in preparation of software computer program on production statistics of N.I.O.C.-OFFSHORE including statistics on water injection and status report of oil wells. Also involved in supervision of project for preparation of software computer programs on production statistics of N.I.O.C. (National Iranian Oil Company).
Process Engineer Trainee
1990 - 1992, NIOC/IOOC, Tehran, Iran
* Based on the Iranian Offshore Oil Company's training program, the two first years of working are allocated for training courses. During this time, I have passed the two years familiarisation period in Lavan, Sirri, Kharq islands, Bahregan Oil Centre and Tehran office.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 10917)

Go to Search Parameters...

Brief Description

Drilling Engineer offshore tender rigs jackups onshore land rigs

process engineer

a senior instrument & Controls engineer

Sr Piping Designer Oil & Gas 3D model

Project management

20+ years experience in Surveying

Senior Planner with more than 20 years experience in Oil & Petrocehmical Industries

Qualified professional Project Manager and licensed US chemical engineer, with 32 years oil and gas and refined products production and processing facilities, pipelines, stations and terminals.

Piping Engineer/Designer

About twenty years' professional experience as a Commissioning and as Front line Operator in LDPE plant in RIL & LLDPE Plant in YANSAB with strong educational background and training.

Presently working as Drilling Manager with Transocean started up the project in India for 5 Jackup rig for ONGC along with Tony Flynn who was than our GM -Integrated services in May 2006. Direct responsibility is managing T12 and JTA ( 300' Jackup)on day to day coordination, planning and execution

AutoCAD drafting, Drawing, Painting (Acrylic, Oil, Water Color), Airbrushing, Faux Finishing, Murals, and Computer Graphics /Illustrations. Software: Adobe Illustrator, Adobe Photoshop, Adobe Streamline, Adobe 3D, Flash, Fractal Painter, Quark Xpress, Microsoft Word, Power Point and various scanning

Instrumentation, Control and Safety Systems Design Engineering - Projects

A Professional Engineer with over 18 years' experiences in Process Control Systems for the design, development & implementation of process control applications, oil storage, movement & blending applications and process training simulations. Extensive knowledge in Honeywell Distributed Control System

(Maintenance with Procurement Exposure)

Initial four (4.0) years of Detail Design experience is in the field of Civil and Structural design of various Multi storey Buildings, Bulk drugs (Ranbaxy Module 5), Auto Industry, Chemical industry, Oil & Gas, Captive Power Plants, Machine Foundations, including Sub & Super structures for various i

Instrumentation and control engineer and instructor Phd neural fuzzy modelling and identification, optimization using genetic algorithms

21 years experience in corrosion engineering, monitoring and applying corrosion mitigation strategies to oil/gas/petrochemical industry. Detailed experience in cathodic protection (CP), pipeline integrity, chemical treatment, corrosion monitoring, coatings and corrosion/mechanical damage assessment.

21 Years Experience of Process Engineering in Refinery/Oil & Gas

A geologist currently working with a major oil companies, specialized in reservoir characterization, formation evaluation, operation geology and geosteering in clastic reservoirs. Develop expertise while working in Australia, Saudi Arabia, North Sea, India and several other international projects.

To be fair to everybody. Shared gain knowledge¡¦s and experienced for the benefits of all and to obtain a position with a progressive company that will utilize my experience, broaden my Knowledge, and offer opportunities for advancement.

Possess a career that spans for over 25 years within the Oil & Gas, Construction, Operation and Maintenance and Manufacturing Industries, performing contract formation and administration work.

Specialised in the design and structural engineering calculations for high integrity mechanical handling systems up to 25,000 tonnes SWL.

26 Years land and project management experience

Oil & Gas Volume Professional

B.E(chemical from dharwad karnataka)

Free! 19 years experience in Production Engineering, Production Operations, workover and service rigs for Artificial Lift equipment, operations supervision and administration.

CHEMICAL ENGINEER HAVING TWENTY FOUR EXPERIENCE IN PETROCHEMICALS MANUFACTURING

34 years experience in Project management, plant construction, commissioning, maintenance, and inspection, with knowledge of Permit to Work systems, experience at man management and engineering levels, and multi discipline supervision. I communicate well on all levels technically & professionally

I have been working for Shell for about 21 yrs now. I joined Shell as a wellsite peterolem engineer in August 1988. Before then I worked for 4 years in Gas and steam electric generating station rising to the post of senior mechanical engineer. I have a Bachelors degree in Mechanical Engineering

Worked as Prod. Sup. /Sr. Prod. operator in FPSO, Gabon/Angola, Al Furat Petroleum Company, Syria, Petroleum Development Oman and Madras Fertilizers Ltd (Urea process plant), India. Have 32 yrs of exp. in operation and commissioning of oil/gas facilities.

Project Controls Engineer, Cost and Schedule, 1984 Civil Engineering graduate

A challenging position as a Geophysicist which will provide an opportunity to use my geophysical skills.

Wide range of experience in Oil & Gas Subcontracts preparation, evaluation and administration.

Revenue, Gas Accountant, Gas Balancing, Scheduling, Marketing

37 years in oil & gas land, seeking contract or perm, willing to relocate

Work Experience. 30 years experience in HR administration in government service, 2 years experience as HR Officer in a political party office and 6 months experience as HR officer in a large oilpalm plantation.

I am a team player and enjoy the challenges every project brings. I am also very capable of independently completing and working on projects alone. I have been involved with a variety of projects, and taken many of them either to IFC or as built stage as required.

Have 20+ years of Accounting experience in refinery, both at corporate and plant level. Held various positions and looked for opportunities to accept additional duties and advancement.

Petroleum Engineer with a solid management experience in Mexico, Latin America, UK and Canada. With specific strengths: leadership, teamwork, customer focus, integrity, marketing and sales and build key accounts. Very good knowledge of PEMEX, Petrobras and NOC's.

Completions/Workovers Operations Manger/Engineer

Over 18 years Oil and Gas experience and have been involved at all levels of conceptual, Front End Engineering, Detailed Design and operational support

Having more than 18 years of working experience as a Wellsite geologist, Mudlogger in Oil & Gas, Geotechnical investigation, Hydrogeology, research & Management. Worked on horizontal, directional & vertical wells for conventional & oilsand coring projects, to examine & describe drill cuttings.

Workover and completion operations engineer

Sr.Staff Geophysicist with more than 35 years of oil industry experience. Generated drilling plays in several basins around the world (Canada, Egypt, Oman, Libya, UAE, Cameroon (Offshore. Structural & Stratigraphic plays. Also overthrust belt experience in Oman & Foothills of Alberta.

Bachelor Science degreed as Civil Engineer with 23 years of professional experience in different job positions in petrochemical, fertilizer, power plant and open coal mine, related with design, engineering, construction and maintenance of reinforced concrete structures and steel structures.

Engineer - Geologist of Oil and Gas Exploration

I would like to apply for a position as Chief Engineer / Maintenance Supervisor with your company where my experience, training and good work habit will be asset to your company. The attached resume covers my 33 plus years of offshore / oilfield / maritime experience as Maintenance Engineer

Astute result-oriented professional with over 28 years of experience (an EPC background with major international contractors, where the work involves execution of a multi-disciplined Engineering Design, Procurement, Construction and Commissioning service especially in OIL & GAS FIELD) in project man

Specialist in Offshore Installation Inspection in Mechanical & Piping

First 1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out