Resume - Pressure Vessels; Package Equipment; Static Equipment; Compress, PV Elite, Auto ...

Misco Jobs

Resume #79593

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To look for challenging work which will utilize my skills and experience in static equipment design, requisitioning, bid evaluation, selection of equipment and vendor documents reviews.

PROFILE
- Over 13 years of strong mechanical experience in equipment design in EPCM and Fabrication industries.
- Experienced in Oil Sands SAGD projects, Refinery projects, Petrochemical and Chemical Industries projects.
- I have handled following major equipment
* Treater – 4,877 mm ID x 36,576 mm S/S Horizontal Dual Polarity Electrostatic Treater o Design pressure 1,470 kPag, and temperature of 163°C
o Designed for Dilbit flow rate of 324,102 kg/hr
* FWKO – 5,791 mm OD x 19,182 S/S Horizontal Free Water Knock Out Drums o Design pressure 1,470 kPag, and temperature of 163°C
o Designed for Dilbit flow rate of 380,283 kg/hr and Produced water flow rate 588,123 kg/hr
* High Pressure Steam Separator – 1,371 mm ID x 8,534 mm S/S vertical vessel c/w SS vanes o Design pressure 14,700 kPag and temperature of 343°C. Shell thickness 89mm (3.5")
o Designed to process 384,540 kg/hr of 75% steam. Separation efficiency of 99.7 % and 100 % for more than 8 microns of droplets removal from steam.
* Diluent Stripper Column – 5,487 mm ID x 28,823 mm T/T vertical vessel o Design pressure 525 kPag and temperature 350°C.
o Material of construction CS and SA-264 (CS+317L Clad), Internals SS 317L
- Experienced in detailed design calculation reports, preparation of engineering data sheets, bid documents, bid evaluation & recommendations, preparation of purchase requirement (MRP), shop fabrication drawings, trouble shooting of design problems resulting from shop and field capabilities and final documentation.
- Have good knowledge of welding and non-destructive testing.
- Fully conversant with ASME Sec. VIII Div. 1, TEMA (R, B, C), ASME (B16.5, B16.47, B31.3), BS 5500, API (650), UBC, NBC, AISC.
- Fully conversant with material specifications (ASME Sec II – Parts A,B,C,D, ASTM, DIN, BS), welding requirements (Sec IX), PWHT / NDE / MDMT requirements. Interact with all combination of materials like carbon steel, stainless steel, HIC and NACE resistant steels, and non-ferrous material.
- Wind and seismic analysis, Zick analysis, Nozzle reinforcement calculations (self reinforced, axial, radial), pressure calculations (internal & external), flange design, tube-sheets, local load analysis (WRC 107, BS 5500), support design (saddle, leg, lug, skirt), lifting arrangement.
- Hands-on experience with design handbooks such as Bedner, Megyesy, Brownell & Young, Moss etc.
- Fully familiar with PFD, P&ID, HAZOP reviews and model reviews.
- Technical coordination among various disciplines, vendors and clients.
- Excels in fast paced environment; successfully meets critical deadlines.
- Self-motivated, goal-orientated team player with effective communication and interpersonal skills.

Education & Certification

- BSc., First class with Distinction, 1995, Mechanical Engineering, The Maharaja Sayajirao University of Baroda (Baroda, India)
- Post Graduate Certificate course in Industrial Purchasing and Materials management, 1996-97, The Maharaja Sayajirao University of Baroda (Baroda, India)
- NDT level – II in radiography testing
- Internal Quality Auditing course certification – Lloyd's Register

ASSOCIATIONS/MEMBERSHIPS

- Association of Professional Engineers, Geologists and Geophysicists of Alberta (APEGGA) - Professional Engineer
- Professional Engineer of Ontario (PEO)

Computer Skill

- Design software: Compress, Code Calc, PV-elite, B-Jac, In house developed software/excel spread sheets
- AutoCAD 2004/2002/2000 and 14 (Custom AutoCAD Mechanical certification – Solid Caddgroup Inc), Vessel drafting programme, Visio
- Windows, MS-office (MS-Excel, MS-Word) & Internet utilities.

EMPLOYMENT HISTORY
Jacobs Canada Inc – Calgary, Alberta Sept 2005- Jan 2009
Senior Mechanical Engineer
- Preparation of equipment datasheet, RFQ packages for bid.
- Design run for the equipment thickness with applicable loading.
- Prepare and update mechanical equipment list and cost estimates.
- Carry out review of vendors' bids and documentations for technical acceptability. Prepare technical recommendation to select technically acceptable, safe and economical mechanical equipment and packages.
- Carry out above functions as per department work instructions, quality management manual, customer's specifications and codes & standards.
- Preparation of material requisition for purchase.
- Review of vendor drawings, documents and design calculation. Compare calculations with design run.
- Interfacing with vendor, other departments and client.
- Trouble shooting fabrication queries and maintain correspondence track.
- As built datasheet preparation.

Projects Handled
- Suncor Firebag 3+ (SAGD-62.5 kbcd design capacity / stage 3,4,5&6 - Total 250 kbcd)
- Suncor Energy o Responsible Engineer for Treater and Free Water Knock Out Package, High Pressure Steam Separators, Diluent Stripper Column, Flash Drums, Rich Fuel Gas Separator and Mixed Fuel Gas Separators
- K3 Sulphur plant SuperClaus retrofit - Central Alberta Mid Stream o The project is retrofit job. Trouble shoot site and/or fabrication queries for retrofit and new equipment.
- Shell Carmon Creek - Shell Canada o The project is a conceptual design and feasibility study for SAGD plant.
o Prepare cost estimate for static equipment

WorleyParsons MEG – Calgary, Alberta July 2005 – Sept 2005
Jr. Mechanical Engineer
- Preparation of equipment datasheet, RFQ packages for bid.
- Preparation of bid analysis and recommendations for static equipment and packaged equipment.
- Review of vendor drawings and design calculations.

Designer / Engineer
Pro-Bel Engineering Limited – Ajax, Ontario Oct 2003-May 2005
Equicon Engineering Limited – Mississauga, Ontario Feb 2001- Oct 2003
- Detail study of clients'/customers' architectural and structural drawings.
- Preparation of concept drawing c/w design calculation for incorporation in shop drawings.
- Preparation of shop drawings and fabrication drawings on Auto-cad.
- Preparing design calculation for rigging sleeves, anchors and davits for approval of professional engineer.
- Preparation of fabrication drawing with bill of materials, welding sizes, tolerances.

Mechanical Design Engineer
L&T Chiyoda Limited - Baroda, India Jun 1998- Sep 2000
Project Technologists Pvt. Ltd. - Baroda, India Aug 1995- Jun 1998
Engineering, procurement, fabrication and construction related to oil and gas, refinery, petrochemical, chemical industries.
- Detail Engineering experience of static mechanical equipment such as pressure vessels, heat exchangers, columns, storage tanks and other process equipments.
- Experienced for different types of heat exchangers.
- Engineering drawing and vendor drawing checking experience.
- Supervise, schedule and coordinate design and engineering work.
- Interface with vendor and consultant for the approval of drawing and design calculations.
- Co-ordination with process, piping, instrumentation and civil department for interfacing.
- Proposal engineering for equipment with Technical Bid Analysis (TBA). Contacted appropriate vendors and conducted techno-commercial evaluation of offers.
- Site deputation for erection of vessels, columns, heat exchangers, tanks, converters, sulphur condensers, combustion chamber
- Preparation of overall project cost, materials, item specification & indenting of materials.
- Verified and approved equipment drawings for mechanical design done by other engineers or by vendors.
- Validation of software.

Projects Handled
- Solvent Deoiling / Dewaxing Unit - Indian Oil Corporation Limited (IOCL) Digboi, India o Responsible Engineer for Heat Exchanger mechanical designs.
- Sulphur Recovery Unit - Bharat Petroleum Company Limited (BPCL) Mumbai, India
Sulphur Recovery Unit - Madras Refinery Limited (MRL) Madras, India o Responsible Engineer for Pressure Vessels, Sulphur Condensers, West Heat Boiler, Vacuum towers.

REFERANCE: Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9601 to 9650 of 10917)

Go to Search Parameters...

Brief Description

I am a male, 25 years old, D3 Graduated of Politeknik Negeri Bandung, Majoring of Mechanical Enginnering. I am a well organized person, hard worker, and have a good dicipline. I have had experience in working in industry. So I know I can do this job excellently

Today professionals must become part of the company’s teamwork approach to accomplishing projects on time and budget. doing things differently, more effective, or more efficiently. I search for Early Responsibilities, achieve Technical Challenges.

After completing my Degree in Mechanical Engineering, I have worked in Diagnostician company providing NDT services on pipelines across Russia. Later I joined GAZPROM’s Subsidiary “Stroytransgaz” in Syria where 36”x319km Gas Pipeline Construction Project gave me a solid background in many QC aspects

GIS Expert (Esri & Geomedia)

Recent graduate with a Bachelors Degree in Mechanical Engineering looking for entry level position

I have a bacheors in engineering sciences, this is a relatively new discipline , which is essentially electronic engineering with a specialization in solid state physics and instrumentation

To obtain a full time job position in Mechanical Engineering ( Product Design engineering, Sales eng, HVAC, Analyst eng and Consulting)

Registered Architect (License No. 19900) since February 2005 issued by Professional Regulation Commission (PRC) of the Republic of the Philippines. Proficient in AutoCAD Program & MicroStation software. Familiar in using Autoplant 3D Structural, Microstation Geopak & 3D Studio Max.

Troubleshooting

multilingual engineer with significant experience in geographic information system, able to manage from technical components even administrative components, concentrate in the range of prevention, diagnostic, planning, design, assembly, administration and treatment in air, soil, water and territory

Control & Instrumentation Engineer with 5 years experience in erection, commissioning and maintenance of control systems and field instruments.

Bachelors - B.A., Applied Mechanical Engineering

A position with a construction company which requires skills in field engineering, cost controlling, planning, scheduling, and estimating

willing to work in a challenging Electrical carrier

A Credit Analyst and an Administrative Officer for more than 2 years, experienced in Accounts Receivable Management and other Administrative works.

To assist the Board in complying with current health and safety legislation and/ or regulations with the objective of ensuring that all reasonable & proper measures are taken to protect the safety and specific training programs;

Exploration,Groundtruths-GPS,Drilling - Log analysis,M.Tech,81%, Geological Remote Sensing and GIS,Centre For Remote Sensing,BARD University,2005

Ability to prepare leases, comprehend legal documents, titles, surveys, legal descriptions and contracts

Experienced Graduate Mechanical Engineer & Post Graduate (Marine Engineer) from United Kingdom HOLDING COC (CERTIFICATE OF COMPETANCY), With Shipping background,Drydock,Offshore & Sailing experience as Engineer Office in Command. I have 7 ur on hand experience on International Level.

Safety Manager/Auditor with Fire/Security and Enviromental experiance

Laboratory Analysis, Administration, Safety

I am a versatile professional, with experience in Construction and Oil/Gas industries. Have worked under very professional environment both onsite and, management levels. My experience and expertise in the field of management and or site, will be very beneficial for any hiring organization.

Qualifications- NEBOSH Certification, OSHA-510 Certification and OSHA-500 Trainer Certification. Skills- HSE Mgt System, QA/QC Mgt System, Contractor HSE Mgt, Project Mgt, Personnel HSE Training, Regulatory Compliance Mgt, Resource Management, Sustainable Development & Conflict Resolution.

Wire line Operator, Well service and Production Operator.

DP Junior experienced in Ultra Deep Water Drilling.

Totally, more than 18 .6 years of experience in Diversified Fields, of which 15 years in Retail Trade in a Service-Related industry & 3.6 years in Wholesale Trade.

Bachelor of Commerce (Computer Application)

Geologist available immediately for contract work in Mineral or Oil & Gas Exploration and Environmental

VBA Programmer for Microsoft Access and Excel

As a professional in oil and gas industry with 10 years experiences, I have been working in various positions : Supervisory; Instrument- Control, Power System, Reliability Engineering; and Maintenance Planner. Within these positions, I have greatly enhance my analytical & mangerial skills

Mechanical Engineering Technologist

A chartered marine technologist with a broad cross discipline outlook with particular experience in the legislative, quality and risk management aspects of the upstream oil and gas industry.

Provide Project Control Scheduling Support

Over 14 years of professional experience of Design, Draughting and Checking of Plant layout and Piping System.Conceptual & detail engineering like Preparation of Plot Plan, Equipment Layout, Piping Layout, Piping Isometrics, Nozzle Orientation & Bill Of Materials preparation.

5+ yrs. experience in the petroleum industry, extensive knowledge of drill data analysis, drill rig site tech support, drill bit technical sales & support, BHA & Hydraulic designs, seismic data & gas transportation data analysis, hard worker and solid work ethics.

LANGUAGES Basics of C & C++, OPERATING SYSTEMS MS-Office, Windows 2000, XP. APPLICATIONS MS-OFFICE

Bachelor Degree in Mechanical (Industry)

Electrical instrument enginer, Prject engineer, maintenance, Loop checking, testing, operation, elctromechanical, F&G, ELV, MV ...etc

As an Electrical Engineer with some Experiences and Qualifications, include Instrumentation, PLCs, Control and Automation, High Technology Machineries and Equipmens Applications Skill, Engineering & Project Management, Computer Applications, Communications, and Leadership Skill.

I possess a strong background in the areas of well stimulation and completion. I am a straight-forward, personable leader with the experience, capability, and focused decision making talents needed to serve as a valuable asset to your organization.

Pressure Vessels; Package Equipment; Static Equipment; Compress, PV Elite, Auto cad Software

A position that will utilize my 10 years of Administration, Recruitment, Education and Tourism experience in positive & sustainable contribution to organization and self with challenging working environment.

Solid Waste Management, Health, Safety and Environmental Management, Fumigation, Site Inspection, First Aid Service etc.

SALES , MARKETING AND PROPOSALS ENGINEER.

Project & Contract Management, Project Control, Planning, Estimation & Proposals

IT Project Management, IT Infrastructure/Network Specialist, DRP & DRS Projects, ERP Implementations, Systems Administration & Support, etc. / Bachelor of Science in Computer Science (BCS).

A 41 years young, energetic and Resourceful, a graduate from college of education Ekiadolor, Benin City, Edo State with National Certificate of Education (N.C.E) in Economics and social studies with 13 years experience with Dickson international limited (Offshore), Niger Construction limited (Onsho

Very skillful, motivated person looking for a job overseas

Offshore Materials & Logistics Coordinator / Controller

Over 25 years of design and engineering experience; providing design, engineering and management services for a variety of projects and fields. Expertise includes estimating, conceptual and finalized layouts, piping design, instrumentation, process, P&ID development, sizing/specifying/requisitioning

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 [ 193 ] 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out