Resume - Maintenance Supervisor/Security, Maintenance Supervisor/ I&C, Project Manager

Misco Jobs

Resume #79639

CONTACT INFORMATION:
View contact information...

EXPERIENCE SUMMARY

Twenty-nine years of diversified technical and management experience including: Maintenance Security Supervisor, Instrumentation and Control Maintenance Supervisor and Project Manager.

EMPLOYMENT HISTORY

American Electric Power * DC Cook Nuclear Plant

2001 - Present: Maintenance Security Supervisor
* Supervised technicians responsible for performing Preventive and Corrective Maintenance on plant security equipment.
* Accountable for overseeing new equipment installation.
* Security Equipment includes fiber optic cameras, microwaves, metal detectors, explosive detectors, x-ray machines, electric strikes, card readers, hand reader stations, and maglocks.
* Substantially reduced the microwave zone equipment downtime from an average of 200 hours per month to approximately 7 hours or less per month.
* Collaborated with Fix-It-Now teams to troubleshoot equipment.
* Managed equipment maintenance budget.

1998 - 2001: Instrumentation and Control Maintenance Supervisor
* Supervised Instrumentation and Control Maintenance crews performing surveillances, bench and loop calibrations, valve setup, gauge calibration, Corrective Maintenance and Preventative Maintenance tasks.
* Performed administrative duties including, but not limited to training, time sheet review, staff schedules and coordination of responsibilities.

1989 - 1998: Project Manager
* Coordinated facility activities associated with the implementation of Instrumentation and Control changes, as well as Electrical Design Changes.
* Coordinated technical, regulatory, material and administrative support for design changes.
* Researched, prepared, and reviewed Design Change packages prior to issuance for implementation.
* Maintained the design change installation for schedule adherence; provided technical direction as required.
* Closed out Operation Return to Service ¡* punchlists.¡¨
* Reviewed as-built drawings for mark-up.
* Analyzed installation documention for completion.

1983 - 1989: Instrumentation and Control Technician/Design Change
* Performed loop calibrations, surveillances, valve calibrations and corrective maintenance.
* Verified design changes to ensure accurate prints and proper implementation.
* Installed design changes and tested to verify completion.

1980 - 1983: Auxillary Equipment Operator
* Operated plant equipment under the direction of the Reactor Operator.

EDUCATION
* 1978-1980 Radio and Video Technician - United Electronics Institute, Grand Rapids, Michigan
* 1978-1980 Electronics Technology - United Electronics Institute, Grand Rapids, Michigan

TRAINING

Security and Equipment Training
* 2003 Operator & Maintenance of RAP 500 Series X-ray machine - Rapiscan Security Products, National Academy for Nuclear Training, Atlanta, Georgia
* 2003 Operator & Maintenance of GE Entry Scan Explosive Detector - Massachusetts
* 2002 Scanex I Training Course - Sentex System Inc. USA, New Jersey
* 2002 Microwave Training Course - Southwest Microwave, Arizona

Management Training
* 2001 Maintenance Supervisor Professional Development Seminar - National Academy for Nuclear Training, Atlanta, Georgia
* 2000 Labor Relations Training - D.C.Cook
* 1999 Maintenance Supervisor Training Program - National Academy for Nuclear Training, D.C.Cook
* 1998 New Leader Program - D.C.Cook
* 1991 Nuclear codes and standards - General Physics Corporation
* 1991 NEC 250: Grounding Electrical Distribution systems - George Washington University
* 1990 Post Modification Testing Training - General Physics Corporation
* 1990 National Electrical Code - University of Toledo
* 1989 Project Management for Engineers - General Physics Corporation

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 10917)

Go to Search Parameters...

Brief Description

Having 18 years of work experience in Project Management / Constrcution / Fabrication

Qualified Hse Manager Wit Experience In Management Of Hse Aspects In Oil & Gas, Lng, Pipelines, Power Plants, Stp/Water Treatment Plante And Infrastructure. Worked In Most Of Critcal Oil / Gas Felds Like OMAN LNG, PDO (Oman); ADNOC, ADCO, ADGAS, ADMA-OPCO (Abu Dhabi). With Ph.D.In Management Of HSE

Instrumentation and control senior / lead engineer

Petroleum Engineer

As Specialist Professional Engineer (Training Engineer)/Mechanical Training Instructor supervisor grade C1, C2 in all aspects of Training and Development (coach and prepare learning materials, capacity and profile building, skill-transfer and counterpart training).

Prodigiously experienced and qualified Engineering Professional, with an enviable, global, 30-year background in the Oil & Gas Production and Processing (On-Shore and Off-Shore), Refining, Petrochemicals, Chemicals, Compression and Gas Turbines industries.

Highly experienced and successful management professional with a demonstrable record of accomplishment; currently seeking a challenging role, within a multi national environment. Offer a range of transferable skills within the areas of strategic management, business process re-engineering, etc

Foreign Exploration Country Manager, Oil Exploraton

Well completions & workovers. Sand control, stimulation. Domestic & international. Onshore & offshore.

Petroleum Engineer with postgraduate studies in System Engineer and Operations Research, over 20 year of experience, working in projects in Peru, Venezuela, Brazil and Argentina, in Offshore and Onshore areas. Involved in secondary, pressure maintenance and horizontal wells recovery projects.

Total 18yr of experience in Piping FEED, Design and Detailed Engineering, Having good expousure of 3D engineering software.

Seismic data processing /reservoir simulation software developer

19 years Experience in Instrument during construction, commissioning, start-up and Maintenance in many different Oil & Gas, Refinery and Petrochemical Projects

PDMS Administration

Civil/steel structure supervisor

Extensive experience on drilling as Wellsite Supervisor, Senior Well Engineer, Wells Superintendent

Project Management

Control Systems Specialist

17 years of post qualification experience in Detail Engineering of Pressure Vessels (Oversized & Shop Fabricated), Reactors, Separators, Drums, Columns, Spheres, Tanks (Storage & Low Pressure), Flare Stack, Vendor Packaged Equipments, Emergency Diesel Generator and Overhead Cranes

Instrument supervisor / foreman

Highly Experienced Well Site Supervisor.Underbalanced High Pressure HighTemp Deep Horizontals

Thirty years experience as a drilling supervisor for an major international operating company. I have an Associate degree in Petrouleum Technology. I am currently consulting in Oman on a land exploration well. I have over 20 years international experience.

Certified Production & Inventory Management professional

25+ years experience in electrical/control system design for the petrochemical industry. Additional three years experience in civil engineering. Experience has included electrical/instrumentation design to NFPA, NEC and ISA standards, field engineering, as well as managerial experience and CAD.

Drilling fluid superintendent / supervisor ( mud, cement, waste management)

I am a knowledgeable Mechanical/Piping Designer with Project Engineering experience, capable of increasing degrees of responsibility.

I have twenty five years of piping design, 10 years of project leading with in the piping group, shop fabrication & field construction c/w PDS & AutoPlant soft wear experience. I have US work experience & posses a valid Social Security card.

Offering more than Fourteen years of Experience in Marine, Offshore, Oil & Gas Industry with a wide variety of projects involved in Electrical & Instrumentation Disciplines. Acquire extensive knowledge in a broad range of Computer programs & other Various E & I Engineering Field

Expert in managing conglomerates and applying strategic planning and control instruments

Instrument / Controlsystems Engineer

Driller / Tool Pusher (Onshore / Offshore)

Geologist geophysicist interpretation

EPCM Project Contracts Interface (Client-EPCM-Subcontractors)

Emergency Management professional with 28+ years of combined experience; managing teams, providing technical expertise and leadership in programs, projects, operations, and training; in both Fire Services, Training Academy’s and the Petrochemical Industry

Electrical Maintenance Engineer With over 30 years of experience in providing services and solutions to electrical maintenance and Training & development etcin the engineering and Oil & gas industry.

To obtain a challenging position with an engineering firm where I can use my relevant skills and experienced as Interface Design Coordinator / AutoCAD Supervisor and be a contributing member in the growth of the company. Willing to work as a key player in challenges where I can put my committed atti

I am capable of achieving organisation¡¦s objectives and organic growth through effective contributions. I have over 13 years of experience in the areas of Health, Safety & Environment Management

Maintenance Supervisor/Security, Maintenance Supervisor/ I&C, Project Manager

20 years fire fighting experience.Now working in ADNOC Off Shore facility

Having 23 years of sound experience in piping and equipment design for Onshore / Offshore Oil and Gas, Petrochemical and Chemical Industries.

24 Years of experience in Piping/ Pipeline Design Engineering for Oil & Gas of Onshore and Offshore facilities.

Experienced land professional with a strong background in all phases of petroleum land management. Proven expertise in a variety of situations, as well as proven leadership skills as demonstrated in Land Manager positions with two companies and as an independent lease broker utilizing the services

Structure designer is make development basic design from engineer to make engineering drawing with make details, sections, connection types and discuss with other department like piping, civil, mechanical etc to make problem solve in engineering design or site.

Mechanical engineer for heat exchanger, package, boiler, fired heater, fabrication, HTRI, compress

25 years Petrochemical / Oil Process Operations Including 10+ years in Supervisory / Man Management positions Commissioning and Start-up Assignments (Overseas)

Team Leader Const/Maint. Oil/Gas Ind.Experienced in planning/execution of projects ,procedures , method statements , permit systems , progress rep. , reviewing change orders, QA/QC and HSE standards. Running multicultural workforces coordinating disciplines and subcontactors.

PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Engineering. Special knowledge in Surface Technologies, especially Thermal Spraying. a German citizen with Permanent Resident Status in Canada.

SENIOR PROFESSIONAL ENGINEER OF 30 YEARS DIVERSE EXPERIENCE

Participates in inspection of Gupco’s R/Sh facilities to provide adequate advise on corrosion matters, especially MIC problems

Petroleum Geologist, having more than 22 years of experience. Presently working with Oil And Natural Gas Corporation Limited, India at Mumbai. Well versed in both development and exploration of hydrocarbon.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out